I'm Running latest cvs version of zaptel, libpri and Asterisk On Fedora Core 3 in a Dell PowerEdge 2800 with 2 Xeon Processors (3.2GHz/2MB Cache)

My current conf is:

==========================================
# cat /etc/zaptel.conf
span=1,0,0,ccs,hdb3
bchan=1-15,17-31
dchan=16
loadzone        = us
defaultzone     = us

==========================================
# cat /etc/asterisk/zapata.conf
[trunkgroups]

[channels]
signalling=pri_cpe
switchtype=euroisdn
echocancel=yes
echocancelwhenbridged=no
group=1
callgroup=1
pickupgroup=1
context=default
echotrainig=no
busydetect=no
callprogress=no
pridialplan=unknown
localpridialplan=national
immediate=no
overlapdial=yes
channel => 1-15,17-31

==========================================
# cat /proc/interrupts
          CPU0       CPU1       CPU2       CPU3
 0:    6837153    6842272    6862416    6941977    IO-APIC-edge  timer
 1:          0          0          0          8    IO-APIC-edge  i8042
 8:          2         45          5         46    IO-APIC-edge  rtc
 9:          0          0          0          0   IO-APIC-level  acpi
12:          0          0          0         58    IO-APIC-edge  i8042
14:        379       1170       1080        530    IO-APIC-edge  ide0
177:        964      16961      16271       4786   IO-APIC-level  megaraid
185:      60020   13494537    2800955   10770635   IO-APIC-level  wcte11xp
193:     864342          0          0        232   IO-APIC-level  eth0
NMI:          0          0          0          0
LOC:   27483129   27483137   27484021   27484020
ERR:          0
MIS:          0

==========================================
=> lspci -vb shows this for the TE110P:
06:02.0 Network controller: Tiger Jet Network Inc. Tiger3XX Modem/ISDN interface
       Subsystem: Unknown device 797e:0001
       Flags: bus master, medium devsel, latency 32, IRQ 10
       I/O ports at ec00
       Memory at fe7ff000 (32-bit, non-prefetchable)
       Capabilities: [40] Power Management version 2

==========================================
=> IRQ10 is used only by digium card:
# lspci -vb | grep "IRQ 10"
       Flags: bus master, medium devsel, latency 32, IRQ 10

==========================================
=> ZTool doesn't show alarms:
  Digium Wildcard TE110P T1/E1 Card 0
       Current Alarms:     No alarms.
       Sync Source:        Internally clocked
       IRQ Misses:               0
       Bipolar Viol:             0
       Tx/Rx Levels:         0/  0
       Total/Conf/Act:      31/ 31/  0
                    1111111111222222222333
           1234567890123456789012345789012
       TxA -------------------------------
       TxB -------------------------------
       TxC -------------------------------
       TxD -------------------------------

       RxA -------------------------------
       RxB -------------------------------
       RxC -------------------------------
       RxD -------------------------------

==========================================
# uname -a
Linux ActTel 2.6.9-1.667smp #1 SMP Tue Nov 2 14:59:52 EST 2004 i686 i686 i386 GNU/Linux