--- kern-bad-2.log 2007-03-31 12:50:23.000000000 -0400 +++ kern-good-2.log 2007-03-31 12:47:50.000000000 -0400 @@ -1,6 +1,6 @@ kernel: klogd 1.4.2, log source = /proc/kmsg started. kernel: Linux version 2.6.20-1.3036.fc7 (brewbuilder@hs20-bc1-7.build.redhat.com) (gcc version 4.1.2 20070327 (Red Hat 4.1.2-7)) #1 SMP Fri Mar 30 23:35:01 EDT 2007 -kernel: Command line: ro root=/dev/VolGroup00/LogVol00 quiet rhgb +kernel: Command line: ro root=/dev/VolGroup00/LogVol00 quiet rhgb mem=3584M kernel: BIOS-provided physical RAM map: kernel: BIOS-e820: 0000000000000000 - 00000000000a0000 (usable) kernel: BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) @@ -15,8 +15,7 @@ kernel: BIOS-e820: 0000000100000000 - 000000011c000000 (usable) kernel: Entering add_active_range(0, 0, 160) 0 entries of 3200 used kernel: Entering add_active_range(0, 256, 917130) 1 entries of 3200 used -kernel: Entering add_active_range(0, 1048576, 1163264) 2 entries of 3200 used -kernel: end_pfn_map = 1163264 +kernel: end_pfn_map = 1048576 kernel: DMI 2.3 present. kernel: ACPI: RSDP 000FEB00, 0024 (r2 DELL ) kernel: ACPI: XSDT 000FD25E, 0074 (r1 DELL WS 380 7 ASL 61) @@ -33,27 +32,24 @@ kernel: ACPI: SSDT DFE8B049, 0175 (r1 DpgPmm Cpu1Ist 11 INTL 20050309) kernel: ACPI: SSDT DFE8B452, 0140 (r1 DpgPmm CpuPm 10 INTL 20050309) kernel: No NUMA configuration found -kernel: Faking a node at 0000000000000000-000000011c000000 +kernel: Faking a node at 0000000000000000-00000000dfe8a000 kernel: Entering add_active_range(0, 0, 160) 0 entries of 3200 used kernel: Entering add_active_range(0, 256, 917130) 1 entries of 3200 used -kernel: Entering add_active_range(0, 1048576, 1163264) 2 entries of 3200 used -kernel: Bootmem setup node 0 0000000000000000-000000011c000000 +kernel: Bootmem setup node 0 0000000000000000-00000000dfe8a000 kernel: Zone PFN ranges: kernel: DMA 0 -> 4096 kernel: DMA32 4096 -> 1048576 -kernel: Normal 1048576 -> 1163264 -kernel: early_node_map[3] active PFN ranges +kernel: Normal 1048576 -> 1048576 +kernel: early_node_map[2] active PFN ranges kernel: 0: 0 -> 160 kernel: 0: 256 -> 917130 -kernel: 0: 1048576 -> 1163264 -kernel: On node 0 totalpages: 1031722 +kernel: On node 0 totalpages: 917034 kernel: DMA zone: 88 pages used for memmap -kernel: DMA zone: 2366 pages reserved -kernel: DMA zone: 1546 pages, LIFO batch:0 -kernel: DMA32 zone: 22440 pages used for memmap -kernel: DMA32 zone: 890594 pages, LIFO batch:31 -kernel: Normal zone: 2464 pages used for memmap -kernel: Normal zone: 112224 pages, LIFO batch:31 +kernel: DMA zone: 2365 pages reserved +kernel: DMA zone: 1547 pages, LIFO batch:0 +kernel: DMA32 zone: 19615 pages used for memmap +kernel: DMA32 zone: 893419 pages, LIFO batch:31 +kernel: Normal zone: 0 pages used for memmap kernel: ACPI: PM-Timer IO Port: 0x808 kernel: ACPI: Local APIC address 0xfee00000 kernel: ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) @@ -75,28 +71,14 @@ kernel: Using ACPI (MADT) for SMP configuration information kernel: Nosave address range: 00000000000a0000 - 00000000000f0000 kernel: Nosave address range: 00000000000f0000 - 0000000000100000 -kernel: Nosave address range: 00000000dfe8a000 - 00000000dfe8b000 -kernel: Nosave address range: 00000000dfe8b000 - 00000000dfe8c000 -kernel: Nosave address range: 00000000dfe8c000 - 00000000dfe8d000 -kernel: Nosave address range: 00000000dfe8d000 - 00000000dfe8e000 -kernel: Nosave address range: 00000000dfe8e000 - 00000000dfe8f000 -kernel: Nosave address range: 00000000dfe8f000 - 00000000e4000000 -kernel: Nosave address range: 00000000e4000000 - 00000000fec00000 -kernel: Nosave address range: 00000000fec00000 - 00000000fed00000 -kernel: Nosave address range: 00000000fed00000 - 00000000fed20000 -kernel: Nosave address range: 00000000fed20000 - 00000000feda0000 -kernel: Nosave address range: 00000000feda0000 - 00000000fee00000 -kernel: Nosave address range: 00000000fee00000 - 00000000fef00000 -kernel: Nosave address range: 00000000fef00000 - 00000000ffb00000 -kernel: Nosave address range: 00000000ffb00000 - 0000000100000000 kernel: Allocating PCI resources starting at e6000000 (gap: e4000000:1ac00000) kernel: SMP: Allowing 4 CPUs, 2 hotplug CPUs kernel: PERCPU: Allocating 44672 bytes of per cpu data -kernel: Built 1 zonelists. Total pages: 1004364 -kernel: Kernel command line: ro root=/dev/VolGroup00/LogVol00 quiet rhgb +kernel: Built 1 zonelists. Total pages: 894966 +kernel: Kernel command line: ro root=/dev/VolGroup00/LogVol00 quiet rhgb mem=3584M kernel: Initializing CPU#0 kernel: PID hash table entries: 4096 (order: 12, 32768 bytes) -kernel: time.c: Detected 2992.580 MHz processor. +kernel: time.c: Detected 2992.572 MHz processor. kernel: Console: colour VGA+ 80x25 kernel: Lock dependency validator: Copyright (c) 2006 Red Hat, Inc., Ingo Molnar kernel: ... MAX_LOCKDEP_SUBCLASSES: 8 @@ -113,10 +95,8 @@ kernel: Checking aperture... kernel: Calgary: detecting Calgary via BIOS EBDA area kernel: Calgary: Unable to locate Rio Grande table in EBDA - bailing! -kernel: PCI-DMA: Using software bounce buffering for IO (SWIOTLB) -kernel: Placing software IO TLB between 0x6e92000 - 0xae92000 -kernel: Memory: 3950912k/4653056k available (2461k kernel code, 175976k reserved, 1444k data, 332k init) -kernel: Calibrating delay using timer specific routine.. 5990.24 BogoMIPS (lpj=2995123) +kernel: Memory: 3569412k/3668520k available (2461k kernel code, 98724k reserved, 1444k data, 332k init) +kernel: Calibrating delay using timer specific routine.. 5990.24 BogoMIPS (lpj=2995124) kernel: Security Framework v1.0.0 initialized kernel: SELinux: Initializing. kernel: SELinux: Starting in permissive mode @@ -133,12 +113,12 @@ kernel: lockdep: not fixing up alternatives. kernel: ACPI: Core revision 20070126 kernel: Using local APIC timer interrupts. -kernel: result 12469053 +kernel: result 12469015 kernel: Detected 12.469 MHz APIC timer. kernel: lockdep: not fixing up alternatives. kernel: Booting processor 1/2 APIC 0x1 kernel: Initializing CPU#1 -kernel: Calibrating delay using timer specific routine.. 5985.21 BogoMIPS (lpj=2992608) +kernel: Calibrating delay using timer specific routine.. 5985.18 BogoMIPS (lpj=2992592) kernel: CPU: Trace cache: 12K uops, L1 D cache: 16K kernel: CPU: L2 cache: 2048K kernel: CPU 1/1 -> Node 0 @@ -279,9 +259,9 @@ kernel: hpet0: 3 64-bit timers, 14318180 Hz kernel: pnp: 00:01: ioport range 0x800-0x85f has been reserved kernel: pnp: 00:01: ioport range 0xc00-0xc7f has been reserved +kernel: Time: tsc clocksource has been installed. kernel: pnp: 00:01: ioport range 0x860-0x8ff could not be reserved kernel: pnp: 00:08: iomem range 0x0-0x9ffff could not be reserved -kernel: Time: tsc clocksource has been installed. kernel: pnp: 00:08: iomem range 0x100000-0xffffff could not be reserved kernel: pnp: 00:08: iomem range 0x1000000-0xdfe8abff could not be reserved kernel: pnp: 00:08: iomem range 0xf0000-0xfffff could not be reserved @@ -341,7 +321,7 @@ kernel: PM: Adding info for platform:pcspkr kernel: PM: Adding info for No Bus:snapshot kernel: audit: initializing netlink socket (disabled) -kernel: audit(1175358108.934:1): initialized +kernel: audit(1175357843.896:1): initialized kernel: Total HugeTLB memory allocated, 0 kernel: VFS: Disk quotas dquot_6.5.1 kernel: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) @@ -614,6 +594,18 @@ kernel: scsi3 : ahci kernel: PM: Adding info for No Bus:host3 kernel: usb 2-2: new full speed USB device using uhci_hcd and address 2 +kernel: PM: Adding info for usb:2-2 +kernel: PM: Adding info for No Bus:usbdev2.2_ep00 +kernel: usb 2-2: configuration #1 chosen from 1 choice +kernel: PM: Adding info for usb:2-2:1.0 +kernel: PM: Adding info for No Bus:usbdev2.2_ep81 +kernel: PM: Adding info for No Bus:usbdev2.2_ep02 +kernel: PM: Adding info for No Bus:usbdev2.2_ep82 +kernel: PM: Adding info for usb:2-2:1.1 +kernel: PM: Adding info for No Bus:usbdev2.2_ep03 +kernel: PM: Adding info for No Bus:usbdev2.2_ep83 +kernel: PM: Adding info for usb:2-2:1.2 +kernel: PM: Adding info for No Bus:usbdev2.2 kernel: ata4: SATA link down (SStatus 0 SControl 300) kernel: PM: Adding info for No Bus:target0:0:0 kernel: scsi 0:0:0:0: Direct-Access ATA WDC WD400BD-75LR 09.0 PQ: 0 ANSI: 5 @@ -626,19 +618,7 @@ kernel: sda: Write Protect is off kernel: sda: Mode Sense: 00 3a 00 00 kernel: SCSI device sda: write cache: enabled, read cache: enabled, doesn't support DPO or FUA -kernel: sda: sda1 sda2 sda3 sda4 <<7>PM: Adding info for usb:2-2 -kernel: PM: Adding info for No Bus:usbdev2.2_ep00 -kernel: usb 2-2: configuration #1 chosen from 1 choice -kernel: PM: Adding info for usb:2-2:1.0 -kernel: PM: Adding info for No Bus:usbdev2.2_ep81 -kernel: PM: Adding info for No Bus:usbdev2.2_ep02 -kernel: PM: Adding info for No Bus:usbdev2.2_ep82 -kernel: PM: Adding info for usb:2-2:1.1 -kernel: PM: Adding info for No Bus:usbdev2.2_ep03 -kernel: PM: Adding info for No Bus:usbdev2.2_ep83 -kernel: PM: Adding info for usb:2-2:1.2 -kernel: PM: Adding info for No Bus:usbdev2.2 -kernel: sda5 > +kernel: sda: sda1 sda2 sda3 sda4 < sda5 > kernel: sd 0:0:0:0: Attached scsi disk sda kernel: usb 3-1: new low speed USB device using uhci_hcd and address 2 kernel: PM: Adding info for usb:3-1 @@ -666,7 +646,7 @@ kernel: device-mapper: ioctl: 4.11.0-ioctl (2006-10-12) initialised: dm-devel@redhat.com kernel: kjournald starting. Commit interval 5 seconds kernel: EXT3-fs: mounted filesystem with ordered data mode. -kernel: audit(1175358116.606:2): enforcing=1 old_enforcing=0 auid=4294967295 +kernel: audit(1175357851.582:2): enforcing=1 old_enforcing=0 auid=4294967295 kernel: security: 3 users, 6 roles, 1760 types, 94 bools, 1 sens, 1024 cats kernel: security: 60 classes, 63835 rules kernel: SELinux: Completing initialization. @@ -690,7 +670,7 @@ kernel: SELinux: initialized (dev bdev, type bdev), uses genfs_contexts kernel: SELinux: initialized (dev rootfs, type rootfs), uses genfs_contexts kernel: SELinux: initialized (dev sysfs, type sysfs), uses genfs_contexts -kernel: audit(1175358117.211:3): policy loaded auid=4294967295 +kernel: audit(1175357852.175:3): policy loaded auid=4294967295 kernel: PM: Removing info for No Bus:vcs1 kernel: PM: Removing info for No Bus:vcsa1 kernel: PM: Adding info for No Bus:vcs1 @@ -702,18 +682,7 @@ kernel: sd 0:0:0:0: Attached scsi generic sg0 type 0 kernel: Floppy drive(s): fd0 is 1.44M kernel: shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 -kernel: intel_rng: Firmware space is locked read-only. If you can't or -kernel: intel_rng: don't want to disable this in firmware setup, and if -kernel: intel_rng: you are certain that your system has a functional -kernel: intel_rng: RNG, try using the 'no_fwh_detect' option. kernel: input: PC Speaker as /class/input/input4 -kernel: iTCO_vendor_support: vendor-support=0 -kernel: iTCO_wdt: Intel TCO WatchDog Timer Driver v1.01 (21-Jan-2007) -kernel: PM: Adding info for platform:iTCO_wdt -kernel: iTCO_wdt: failed to reset NO_REBOOT flag, reboot disabled by hardware -kernel: iTCO_wdt: No card detected -kernel: ACPI: PCI Interrupt 0000:00:1f.3[B] -> GSI 17 (level, low) -> IRQ 17 -kernel: PM: Adding info for No Bus:i2c-0 kernel: ata_piix 0000:00:1f.1: version 2.10ac1 kernel: ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 16 (level, low) -> IRQ 16 kernel: PCI: Setting latency timer of device 0000:00:1f.1 to 64 @@ -721,19 +690,30 @@ kernel: ata6: PATA max UDMA/133 cmd 0x0000000000010170 ctl 0x0000000000010376 bmdma 0x000000000001ffa8 irq 15 kernel: scsi4 : ata_piix kernel: PM: Adding info for No Bus:host4 -kernel: rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0 -kernel: rtc_cmos: probe of 00:05 failed with error -16 -kernel: ata5.00: ATAPI, max UDMA/33 -kernel: ata5.01: ATAPI, max UDMA/33 kernel: parport: PnPBIOS parport detected. kernel: parport0: PC-style at 0x378 (0x778), irq 7 [PCSPP,TRISTATE] -kernel: ata5.00: configured for UDMA/33 +kernel: intel_rng: Firmware space is locked read-only. If you can't or +kernel: intel_rng: don't want to disable this in firmware setup, and if +kernel: intel_rng: you are certain that your system has a functional +kernel: intel_rng: RNG, try using the 'no_fwh_detect' option. kernel: Bluetooth: Core ver 2.11 kernel: PM: Adding info for platform:bluetooth kernel: NET: Registered protocol family 31 kernel: Bluetooth: HCI device and connection manager initialized kernel: Bluetooth: HCI socket layer initialized -kernel: PM: Adding info for No Bus:timer +kernel: rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0 +kernel: rtc_cmos: probe of 00:05 failed with error -16 +kernel: ata5.00: ATAPI, max UDMA/33 +kernel: ata5.01: ATAPI, max UDMA/33 +kernel: Bluetooth: HCI USB driver ver 2.9 +kernel: PM: Removing info for No Bus:usbdev2.2_ep03 +kernel: PM: Removing info for No Bus:usbdev2.2_ep83 +kernel: PM: Adding info for No Bus:usbdev2.2_ep03 +kernel: PM: Adding info for No Bus:usbdev2.2_ep83 +kernel: PM: Adding info for No Bus:hci0 +kernel: usbcore: registered new interface driver hci_usb +kernel: ata5.00: configured for UDMA/33 +kernel: iTCO_vendor_support: vendor-support=0 kernel: ata5.01: configured for UDMA/33 kernel: scsi5 : ata_piix kernel: PM: Adding info for No Bus:host5 @@ -746,17 +726,8 @@ kernel: scsi 4:0:1:0: CD-ROM SAMSUNG CD-ROM SC-148A B403 PQ: 0 ANSI: 5 kernel: PM: Adding info for scsi:4:0:1:0 kernel: scsi 4:0:1:0: Attached scsi generic sg2 type 5 -kernel: ACPI: PCI Interrupt 0000:05:02.2[B] -> GSI 19 (level, low) -> IRQ 19 -kernel: Bluetooth: HCI USB driver ver 2.9 -kernel: PM: Removing info for No Bus:usbdev2.2_ep03 -kernel: PM: Removing info for No Bus:usbdev2.2_ep83 -kernel: PM: Adding info for No Bus:usbdev2.2_ep03 -kernel: PM: Adding info for No Bus:usbdev2.2_ep83 -kernel: PM: Adding info for No Bus:hci0 -kernel: usbcore: registered new interface driver hci_usb -kernel: fw_ohci: Added fw-ohci device 0000:05:02.2, OHCI version 1.10 -kernel: ACPI: PCI Interrupt 0000:05:05.0[A] -> GSI 17 (level, low) -> IRQ 17 -kernel: fw_ohci: Added fw-ohci device 0000:05:05.0, OHCI version 1.0 +kernel: ACPI: PCI Interrupt 0000:00:1f.3[B] -> GSI 17 (level, low) -> IRQ 17 +kernel: PM: Adding info for No Bus:i2c-0 kernel: tg3.c:v3.75 (March 23, 2007) kernel: ACPI: PCI Interrupt 0000:04:00.0[A] -> GSI 17 (level, low) -> IRQ 17 kernel: PCI: Setting latency timer of device 0000:04:00.0 to 64 @@ -764,22 +735,31 @@ kernel: eth0: Tigon3 [partno(BCM5751PKFBG) rev 4001 PHY(5750)] (PCI Express) 10/100/1000Base-T Ethernet 00:12:3f:70:62:22 kernel: eth0: RXcsums[1] LinkChgREG[1] MIirq[1] ASF[0] WireSpeed[1] TSOcap[1] kernel: eth0: dma_rwctrl[76180000] dma_mask[64-bit] -kernel: PM: Adding info for No Bus:seq +kernel: ACPI: PCI Interrupt 0000:05:02.2[B] -> GSI 19 (level, low) -> IRQ 19 +kernel: iTCO_wdt: Intel TCO WatchDog Timer Driver v1.01 (21-Jan-2007) +kernel: PM: Adding info for platform:iTCO_wdt +kernel: iTCO_wdt: failed to reset NO_REBOOT flag, reboot disabled by hardware +kernel: iTCO_wdt: No card detected +kernel: PM: Adding info for No Bus:timer +kernel: fw_ohci: Added fw-ohci device 0000:05:02.2, OHCI version 1.10 +kernel: ACPI: PCI Interrupt 0000:05:05.0[A] -> GSI 17 (level, low) -> IRQ 17 +kernel: fw_ohci: Added fw-ohci device 0000:05:05.0, OHCI version 1.0 kernel: sr0: scsi3-mmc drive: 0x/48x writer cd/rw xa/form2 cdda tray kernel: Uniform CD-ROM driver Revision: 3.20 kernel: sr 4:0:0:0: Attached scsi CD-ROM sr0 kernel: sr1: scsi3-mmc drive: 1x/48x cd/rw xa/form2 cdda tray kernel: sr 4:0:1:0: Attached scsi CD-ROM sr1 -kernel: PM: Adding info for No Bus:sequencer -kernel: PM: Adding info for No Bus:sequencer2 kernel: PM: Adding info for No Bus:midiC1D0 kernel: PM: Adding info for No Bus:midi1 kernel: PM: Adding info for No Bus:dmmidi1 -kernel: PM: Adding info for firewire:fw0 -kernel: fw_core: created new fw device fw0 (0 config rom retries) kernel: PM: Adding info for No Bus:controlC1 kernel: PM: Adding info for No Bus:mixer1 kernel: usbcore: registered new interface driver snd-usb-audio +kernel: PM: Adding info for No Bus:seq +kernel: PM: Adding info for No Bus:sequencer +kernel: PM: Adding info for No Bus:sequencer2 +kernel: PM: Adding info for firewire:fw0 +kernel: fw_core: created new fw device fw0 (0 config rom retries) kernel: PM: Adding info for firewire:fw1 kernel: fw_core: created new fw device fw1 (0 config rom retries) kernel: floppy0: no floppy controllers found @@ -851,7 +831,7 @@ kernel: tg3: eth0: Link is up at 100 Mbps, full duplex. kernel: tg3: eth0: Flow control is on for TX and on for RX. kernel: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready -kernel: audit(1175358146.191:4): audit_pid=2124 old=0 by auid=4294967295 subj=system_u:system_r:auditd_t:s0 +kernel: audit(1175357881.198:4): audit_pid=2114 old=0 by auid=4294967295 subj=system_u:system_r:auditd_t:s0 kernel: Bluetooth: L2CAP ver 2.8 kernel: Bluetooth: L2CAP socket layer initialized kernel: Bluetooth: RFCOMM socket layer initialized @@ -863,24 +843,6 @@ kernel: ip_tables: (C) 2000-2006 Netfilter Core Team kernel: Netfilter messages via NETLINK v0.30. kernel: nf_conntrack version 0.5.0 (8192 buckets, 65536 max) -kernel: PM: Adding info for No Bus:vcs4 -kernel: PM: Adding info for No Bus:vcsa4 -kernel: PM: Adding info for No Bus:vcs6 -kernel: PM: Adding info for No Bus:vcsa6 -kernel: PM: Adding info for No Bus:vcs5 -kernel: PM: Removing info for No Bus:vcs6 -kernel: PM: Removing info for No Bus:vcsa6 -kernel: PM: Adding info for No Bus:vcs6 -kernel: PM: Adding info for No Bus:vcsa6 -kernel: PM: Removing info for No Bus:vcs4 -kernel: PM: Removing info for No Bus:vcsa4 -kernel: PM: Adding info for No Bus:vcs4 -kernel: PM: Adding info for No Bus:vcsa4 -kernel: PM: Adding info for No Bus:vcsa5 -kernel: PM: Removing info for No Bus:vcs5 -kernel: PM: Removing info for No Bus:vcsa5 -kernel: PM: Adding info for No Bus:vcs5 -kernel: PM: Adding info for No Bus:vcsa5 kernel: PM: Adding info for No Bus:vcs2 kernel: PM: Adding info for No Bus:vcsa2 kernel: PM: Removing info for No Bus:vcs2 @@ -893,4 +855,22 @@ kernel: PM: Removing info for No Bus:vcsa3 kernel: PM: Adding info for No Bus:vcs3 kernel: PM: Adding info for No Bus:vcsa3 +kernel: PM: Adding info for No Bus:vcs4 +kernel: PM: Adding info for No Bus:vcsa4 +kernel: PM: Removing info for No Bus:vcs4 +kernel: PM: Removing info for No Bus:vcsa4 +kernel: PM: Adding info for No Bus:vcs4 +kernel: PM: Adding info for No Bus:vcsa4 +kernel: PM: Adding info for No Bus:vcs5 +kernel: PM: Adding info for No Bus:vcsa5 +kernel: PM: Removing info for No Bus:vcs5 +kernel: PM: Removing info for No Bus:vcsa5 +kernel: PM: Adding info for No Bus:vcs5 +kernel: PM: Adding info for No Bus:vcsa5 +kernel: PM: Adding info for No Bus:vcs6 +kernel: PM: Adding info for No Bus:vcsa6 +kernel: PM: Removing info for No Bus:vcs6 +kernel: PM: Removing info for No Bus:vcsa6 +kernel: PM: Adding info for No Bus:vcs6 +kernel: PM: Adding info for No Bus:vcsa6 kernel: virbr0: no IPv6 routers present