Linux version 2.6.9-42.ELsmp (buildcentos@build-i386) (gcc version 3.4.6 20060404 (Red Hat 3.4.6-3)) #1 SMP Sat Aug 12 09:39:11 CDT 2006 BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009c000 (usable) BIOS-e820: 000000000009c000 - 00000000000a0000 (reserved) BIOS-e820: 00000000000d8000 - 00000000000e0000 (reserved) BIOS-e820: 00000000000e4000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 00000000bfef0000 (usable) BIOS-e820: 00000000bfef0000 - 00000000bfefc000 (ACPI data) BIOS-e820: 00000000bfefc000 - 00000000bff00000 (ACPI NVS) BIOS-e820: 00000000bff00000 - 00000000bff80000 (usable) BIOS-e820: 00000000bff80000 - 00000000c0000000 (reserved) BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved) BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) BIOS-e820: 00000000ff800000 - 00000000ffc00000 (reserved) BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved) 2175MB HIGHMEM available. 896MB LOWMEM available. found SMP MP-table at 000f66c0 Using x86 segment limits to approximate NX protection On node 0 totalpages: 786304 DMA zone: 4096 pages, LIFO batch:1 Normal zone: 225280 pages, LIFO batch:16 HighMem zone: 556928 pages, LIFO batch:16 DMI present. Using APIC driver default ACPI: RSDP (v000 PTLTD ) @ 0x000f6720 ACPI: RSDT (v001 PTLTD RSDT 0x06040000 LTP 0x00000000) @ 0xbfef8195 ACPI: FADT (v001 INTEL K_CANYON 0x06040000 PTL 0x00000008) @ 0xbfefbe60 ACPI: MADT (v001 PTLTD APIC 0x06040000 LTP 0x00000000) @ 0xbfefbed4 ACPI: BOOT (v001 PTLTD $SBFTBL$ 0x06040000 LTP 0x00000001) @ 0xbfefbf88 ACPI: SPCR (v001 PTLTD $UCRTBL$ 0x06040000 PTL 0x00000001) @ 0xbfefbfb0 ACPI: DSDT (v001 INTEL PLUMAS 0x06040000 MSFT 0x0100000e) @ 0x00000000 ACPI: PM-Timer IO Port: 0x1008 ACPI: Local APIC address 0xfee00000 ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) Processor #0 15:2 APIC version 20 ACPI: LAPIC (acpi_id[0x01] lapic_id[0x06] enabled) Processor #6 15:2 APIC version 20 ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled) Processor #1 15:2 APIC version 20 ACPI: LAPIC (acpi_id[0x03] lapic_id[0x07] enabled) Processor #7 15:2 APIC version 20 ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1]) ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1]) Enabling APIC mode: Flat. Using 0 I/O APICs ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23 ACPI: IOAPIC (id[0x03] address[0xfec80000] gsi_base[24]) IOAPIC[1]: apic_id 3, version 32, address 0xfec80000, GSI 24-47 ACPI: IOAPIC (id[0x04] address[0xfec80400] gsi_base[48]) IOAPIC[2]: apic_id 4, version 32, address 0xfec80400, GSI 48-71 ACPI: IOAPIC (id[0x05] address[0xfec81000] gsi_base[72]) IOAPIC[3]: apic_id 5, version 32, address 0xfec81000, GSI 72-95 ACPI: IOAPIC (id[0x08] address[0xfec81400] gsi_base[96]) IOAPIC[4]: apic_id 8, version 32, address 0xfec81400, GSI 96-119 ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 high edge) ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) ACPI: IRQ0 used by override. ACPI: IRQ2 used by override. ACPI: IRQ9 used by override. Using ACPI (MADT) for SMP configuration information Allocating PCI resources starting at c4000000 (gap: c0000000:3ec00000) Built 1 zonelists Kernel command line: ro root=LABEL=/ mapped APIC to ffffd000 (fee00000) Initializing CPU#0 CPU 0 irqstacks, hard=c03ee000 soft=c03ce000 PID hash table entries: 4096 (order: 12, 65536 bytes) Detected 2396.418 MHz processor. Using pmtmr for high-res timesource Console: colour VGA+ 80x25 Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) Memory: 3113488k/3145216k available (1876k kernel code, 30756k reserved, 759k data, 184k init, 2227648k highmem) Calibrating delay using timer specific routine.. 4795.71 BogoMIPS (lpj=2397859) Security Scaffold v1.0.0 initialized SELinux: Initializing. SELinux: Starting in permissive mode There is already a security framework initialized, register_security failed. selinux_register_security: Registering secondary module capability Capability LSM initialized as secondary Mount-cache hash table entries: 512 (order: 0, 4096 bytes) CPU: After generic identify, caps: 3febfbff 00000000 00000000 00000000 CPU: After vendor identify, caps: 3febfbff 00000000 00000000 00000000 CPU: Trace cache: 12K uops, L1 D cache: 8K CPU: L2 cache: 512K CPU0: Initial APIC ID: 0, Physical Processor ID: 0 CPU: After all inits, caps: 3febf3ff 00000000 00000000 00000080 Intel machine check architecture supported. Intel machine check reporting enabled on CPU#0. CPU0: Intel P4/Xeon Extended MCE MSRs (12) available CPU0: Thermal monitoring enabled Enabling fast FPU save and restore... done. Enabling unmasked SIMD FPU exception support... done. Checking 'hlt' instruction... OK. CPU0: Intel(R) XEON(TM) CPU 2.40GHz stepping 04 per-CPU timeslice cutoff: 1462.95 usecs. task migration cache decay timeout: 2 msecs. Booting processor 1/1 eip 3000 CPU 1 irqstacks, hard=c03ef000 soft=c03cf000 Initializing CPU#1 Calibrating delay using timer specific routine.. 4791.17 BogoMIPS (lpj=2395587) CPU: After generic identify, caps: 3febfbff 00000000 00000000 00000000 CPU: After vendor identify, caps: 3febfbff 00000000 00000000 00000000 CPU: Trace cache: 12K uops, L1 D cache: 8K CPU: L2 cache: 512K CPU1: Initial APIC ID: 1, Physical Processor ID: 0 CPU: After all inits, caps: 3febf3ff 00000000 00000000 00000080 Intel machine check architecture supported. Intel machine check reporting enabled on CPU#1. CPU1: Intel P4/Xeon Extended MCE MSRs (12) available CPU1: Thermal monitoring enabled CPU1: Intel(R) XEON(TM) CPU 2.40GHz stepping 04 Booting processor 2/6 eip 3000 CPU 2 irqstacks, hard=c03f0000 soft=c03d0000 Initializing CPU#2 Calibrating delay using timer specific routine.. 4791.17 BogoMIPS (lpj=2395586) CPU: After generic identify, caps: 3febfbff 00000000 00000000 00000000 CPU: After vendor identify, caps: 3febfbff 00000000 00000000 00000000 CPU: Trace cache: 12K uops, L1 D cache: 8K CPU: L2 cache: 512K CPU2: Initial APIC ID: 6, Physical Processor ID: 3 CPU: After all inits, caps: 3febf3ff 00000000 00000000 00000080 Intel machine check architecture supported. Intel machine check reporting enabled on CPU#2. CPU2: Intel P4/Xeon Extended MCE MSRs (12) available CPU2: Thermal monitoring enabled CPU2: Intel(R) XEON(TM) CPU 2.40GHz stepping 04 Booting processor 3/7 eip 3000 CPU 3 irqstacks, hard=c03f1000 soft=c03d1000 Initializing CPU#3 Calibrating delay using timer specific routine.. 4791.22 BogoMIPS (lpj=2395611) CPU: After generic identify, caps: 3febfbff 00000000 00000000 00000000 CPU: After vendor identify, caps: 3febfbff 00000000 00000000 00000000 CPU: Trace cache: 12K uops, L1 D cache: 8K CPU: L2 cache: 512K CPU3: Initial APIC ID: 7, Physical Processor ID: 3 CPU: After all inits, caps: 3febf3ff 00000000 00000000 00000080 Intel machine check architecture supported. Intel machine check reporting enabled on CPU#3. CPU3: Intel P4/Xeon Extended MCE MSRs (12) available CPU3: Thermal monitoring enabled CPU3: Intel(R) XEON(TM) CPU 2.40GHz stepping 04 Total of 4 processors activated (19169.28 BogoMIPS). ENABLING IO-APIC IRQs ..TIMER: vector=0x31 pin1=2 pin2=-1 checking TSC synchronization across 4 CPUs: passed. Brought up 4 CPUs zapping low mappings. checking if image is initramfs... it is Freeing initrd memory: 544k freed NET: Registered protocol family 16 PCI: PCI BIOS revision 2.10 entry at 0xfd875, last bus=7 PCI: Using configuration type 1 mtrr: v2.0 (20020519) mtrr: your CPUs had inconsistent fixed MTRR settings mtrr: probably your BIOS does not setup all CPUs. mtrr: corrected configuration. ACPI: Subsystem revision 20040816 ACPI: Interpreter enabled ACPI: Using IOAPIC for interrupt routing ACPI: PCI Root Bridge [PCI0] (00:00) PCI: Probing PCI hardware (bus 00) PCI: Ignoring BAR0-3 of IDE controller 0000:00:1f.1 PCI: Transparent bridge - 0000:00:1e.0 ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 10 *11 14 15) ACPI: PCI Interrupt Link [LNKB] (IRQs 3 10 *11 14 15) ACPI: PCI Interrupt Link [LNKC] (IRQs 3 10 11 14 15) *5 ACPI: PCI Interrupt Link [LNKD] (IRQs 3 *10 11 14 15) ACPI: PCI Interrupt Link [LNKE] (IRQs 3 10 *11 14 15) ACPI: PCI Interrupt Link [LNKF] (IRQs 3 10 *11 14 15) ACPI: PCI Interrupt Link [LNKG] (IRQs 3 10 11 14 15) *0, disabled. ACPI: PCI Interrupt Link [LNKH] (IRQs 3 10 11 14 15) *0, disabled. ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.ICH3._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HLB_.PH2A._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HLB_.PH2B._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HLC_.PH2A._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HLC_.PH2B._PRT] Linux Plug and Play Support v0.97 (c) Adam Belay usbcore: registered new driver usbfs usbcore: registered new driver hub PCI: Using ACPI for IRQ routing ACPI: PCI interrupt 0000:00:1d.0[A] -> GSI 16 (level, low) -> IRQ 169 ACPI: PCI interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) -> IRQ 177 ACPI: PCI interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 185 ACPI: PCI interrupt 0000:00:1f.1[A] -> GSI 18 (level, low) -> IRQ 185 ACPI: PCI interrupt 0000:00:1f.3[B] -> GSI 17 (level, low) -> IRQ 193 ACPI: PCI interrupt 0000:03:01.0[A] -> GSI 24 (level, low) -> IRQ 201 ACPI: PCI interrupt 0000:05:01.0[A] -> GSI 96 (level, low) -> IRQ 209 ACPI: PCI interrupt 0000:07:01.0[A] -> GSI 16 (level, low) -> IRQ 169 ACPI: PCI interrupt 0000:07:02.0[A] -> GSI 17 (level, low) -> IRQ 193 ACPI: PCI interrupt 0000:07:03.0[A] -> GSI 18 (level, low) -> IRQ 185 Simple Boot Flag at 0x36 set to 0x1 apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac) apm: disabled - APM is not SMP safe. audit: initializing netlink socket (disabled) audit(1175184314.730:1): initialized highmem bounce pool size: 64 pages Total HugeTLB memory allocated, 0 VFS: Disk quotas dquot_6.5.1 Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) SELinux: Registering netfilter hooks Initializing Cryptographic API ksign: Installing public key data Loading keyring - Added public key 10EA8AC2C8019830 - User ID: CentOS (Kernel Module GPG key) pci_hotplug: PCI Hot Plug PCI Core version: 0.5 ACPI: Processor [CPU0] (supports C1) ACPI: Processor [CPU1] (supports C1) Real Time Clock Driver v1.12 Linux agpgart interface v0.100 (c) Dave Jones i8042.c: Can't read CTR while initializing i8042. Serial: 8250/16550 driver $Revision: 1.90 $ 8 ports, IRQ sharing enabled ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A RAMDISK driver initialized: 16 RAM disks of 16384K size 1024 blocksize divert: not allocating divert_blk for non-ethernet device lo Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx ICH3: IDE controller at PCI slot 0000:00:1f.1 ACPI: PCI interrupt 0000:00:1f.1[A] -> GSI 18 (level, low) -> IRQ 185 ICH3: chipset revision 2 ICH3: not 100% native mode: will probe irqs later ide0: BM-DMA at 0x2060-0x2067, BIOS settings: hda:pio, hdb:pio ide1: BM-DMA at 0x2068-0x206f, BIOS settings: hdc:pio, hdd:pio Probing IDE interface ide0... hda: CREATIVE CD5233E-N, ATAPI CD/DVD-ROM drive Using cfq io scheduler ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 Probing IDE interface ide1... Probing IDE interface ide1... Probing IDE interface ide2... Probing IDE interface ide3... Probing IDE interface ide4... Probing IDE interface ide5... hda: ATAPI 52X CD-ROM drive, 128kB Cache, UDMA(33) Uniform CD-ROM driver Revision: 3.20 ide-floppy driver 0.99.newide usbcore: registered new driver hiddev usbcore: registered new driver usbhid drivers/usb/input/hid-core.c: v2.0:USB HID core driver mice: PS/2 mouse device common for all mice md: md driver 0.90.0 MAX_MD_DEVS=256, MD_SB_DISKS=27 NET: Registered protocol family 2 IP route cache hash table entries: 131072 (order: 7, 524288 bytes) TCP established hash table entries: 262144 (order: 10, 4194304 bytes) TCP bind hash table entries: 262144 (order: 9, 3145728 bytes) TCP: Hash tables configured (established 262144 bind 262144) Initializing IPsec netlink socket NET: Registered protocol family 1 NET: Registered protocol family 17 ACPI: (supports S0 S1 S4 S5) ACPI wakeup devices: KBC0 MSE0 ICH3 PH2A PH2B PH2A PH2B PH2A PH2B USB1 USB2 USB3 Freeing unused kernel memory: 184k freed SCSI subsystem initialized ACPI: PCI interrupt 0000:05:01.0[A] -> GSI 96 (level, low) -> IRQ 209 scsi0 : Adaptec AIC7XXX EISA/VLB/PCI SCSI HBA DRIVER, Rev 6.2.36 aic7890/91: Ultra2 Wide Channel A, SCSI Id=7, 32/253 SCBs (scsi0:A:1): 80.000MB/s transfers (40.000MHz, offset 127, 16bit) Vendor: EXABYTE Model: VXA-172 Rev: 310E Type: Sequential-Access ANSI SCSI revision: 03 Adaptec aacraid driver (1.1-5[2412]) ACPI: PCI interrupt 0000:03:01.0[A] -> GSI 24 (level, low) -> IRQ 201 aacraid0: kernel 5.2-0[11564] aacraid0: monitor 5.2-0[11564] aacraid0: bios 5.2-0[11564] aacraid0: serial 167eea aacraid0: Non-DASD support enabled. scsi1 : aacraid Vendor: Adaptec Model: 2130S RAID5 Rev: V1.0 Type: Direct-Access ANSI SCSI revision: 02 SCSI device sda: 286285824 512-byte hdwr sectors (146578 MB) sda: Write Protect is off sda: Mode Sense: 03 00 00 00 SCSI device sda: drive cache: write through SCSI device sda: 286285824 512-byte hdwr sectors (146578 MB) sda: Write Protect is off sda: Mode Sense: 03 00 00 00 SCSI device sda: drive cache: write through sda: sda1 sda2 sda3 sda4 < sda5 sda6 sda7 sda8 sda9 sda10 > Attached scsi removable disk sda at scsi1, channel 0, id 0, lun 0 kjournald starting. Commit interval 5 seconds EXT3-fs: mounted filesystem with ordered data mode. SELinux: Disabled at runtime. SELinux: Unregistering netfilter hooks st: Version 20040403, fixed bufsize 32768, s/g segs 256 Attached scsi tape st0 at scsi0, channel 0, id 1, lun 0 st0: try direct i/o: yes (alignment 512 B), max page reachable by HBA 134217727 st0: Block limits 4 - 245760 bytes. inserting floppy driver for 2.6.9-42.ELsmp Floppy drive(s): fd0 is 1.44M FDC 0 is a post-1991 82077 e100: Intel(R) PRO/100 Network Driver, 3.5.10-k2-NAPI e100: Copyright(c) 1999-2005 Intel Corporation ACPI: PCI interrupt 0000:07:02.0[A] -> GSI 17 (level, low) -> IRQ 193 divert: allocating divert_blk for eth0 e100: eth0: e100_probe: addr 0xfc701000, irq 193, MAC addr 00:30:48:24:1E:AB ACPI: PCI interrupt 0000:07:03.0[A] -> GSI 18 (level, low) -> IRQ 185 divert: allocating divert_blk for eth1 e100: eth1: e100_probe: addr 0xfc702000, irq 185, MAC addr 00:30:48:24:1E:AC eepro100.c:v1.09j-t 9/29/99 Donald Becker http://www.scyld.com/network/eepro100.html eepro100.c: $Revision: 1.36 $ 2000/11/17 Modified by Andrey V. Savochkin and others shpchp: shpc_init : shpc_cap_offset == 0 shpchp: shpc_init : shpc_cap_offset == 0 shpchp: shpc_init : shpc_cap_offset == 0 shpchp: shpc_init : shpc_cap_offset == 0 shpchp: shpc_init : shpc_cap_offset == 0 shpchp: shpc_init : shpc_cap_offset == 0 shpchp: shpc_init : shpc_cap_offset == 0 shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 hw_random hardware driver 1.0.0 loaded USB Universal Host Controller Interface driver v2.2 ACPI: PCI interrupt 0000:00:1d.0[A] -> GSI 16 (level, low) -> IRQ 169 uhci_hcd 0000:00:1d.0: UHCI Host Controller PCI: Setting latency timer of device 0000:00:1d.0 to 64 uhci_hcd 0000:00:1d.0: irq 169, io base 00002000 uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1 hub 1-0:1.0: USB hub found hub 1-0:1.0: 2 ports detected ACPI: PCI interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) -> IRQ 177 uhci_hcd 0000:00:1d.1: UHCI Host Controller PCI: Setting latency timer of device 0000:00:1d.1 to 64 uhci_hcd 0000:00:1d.1: irq 177, io base 00002020 uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2 hub 2-0:1.0: USB hub found hub 2-0:1.0: 2 ports detected ACPI: PCI interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 185 uhci_hcd 0000:00:1d.2: UHCI Host Controller PCI: Setting latency timer of device 0000:00:1d.2 to 64 uhci_hcd 0000:00:1d.2: irq 185, io base 00002040 uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3 hub 3-0:1.0: USB hub found hub 3-0:1.0: 2 ports detected md: Autodetecting RAID arrays. md: autorun ... md: ... autorun DONE. usb 1-2: new low speed USB device using address 2 input: USB HID v1.10 Keyboard [Composite USB PS2 Converter USB to PS2 Adaptor v1.12] on usb-0000:00:1d.0-2 input: USB HID v1.10 Mouse [Composite USB PS2 Converter USB to PS2 Adaptor v1.12] on usb-0000:00:1d.0-2 ACPI: Power Button (FF) [PWRF] EXT3 FS on sda5, internal journal device-mapper: 4.5.0-ioctl (2005-10-04) initialised: dm-devel@redhat.com cdrom: open failed. kjournald starting. Commit interval 5 seconds EXT3 FS on sda1, internal journal EXT3-fs: mounted filesystem with ordered data mode. kjournald starting. Commit interval 5 seconds EXT3 FS on sda10, internal journal EXT3-fs: mounted filesystem with ordered data mode. kjournald starting. Commit interval 5 seconds EXT3 FS on sda9, internal journal EXT3-fs: mounted filesystem with ordered data mode. kjournald starting. Commit interval 5 seconds EXT3 FS on sda3, internal journal EXT3-fs: mounted filesystem with ordered data mode. kjournald starting. Commit interval 5 seconds EXT3 FS on sda2, internal journal EXT3-fs: mounted filesystem with ordered data mode. Adding 2096440k swap on /dev/sda6. Priority:-1 extents:1 Adding 2096440k swap on /dev/sda7. Priority:-2 extents:1 Adding 2096440k swap on /dev/sda8. Priority:-3 extents:1 IA-32 Microcode Update Driver: v1.14 microcode: CPU1 updated from revision 0x0 to 0x1f, date = 06052003 microcode: CPU2 updated from revision 0x0 to 0x1f, date = 06052003 microcode: CPU3 updated from revision 0x0 to 0x1f, date = 06052003 microcode: CPU0 updated from revision 0x0 to 0x1f, date = 06052003 IA-32 Microcode Update Driver v1.14 unregistered ip_tables: (C) 2000-2002 Netfilter core team ip_tables: (C) 2000-2002 Netfilter core team e100: eth0: e100_watchdog: link up, 100Mbps, full-duplex i2c /dev entries driver NET: Registered protocol family 10 Disabled Privacy Extensions on device c0344160(lo) IPv6 over IPv4 tunneling driver divert: not allocating divert_blk for non-ethernet device sit0 eth0: no IPv6 routers present