U-Boot 1.1.2 (Aug 28 2005 - 13:37:25) QNAP System, Inc. CPU: MPC8245 Revision 1.4 at 266.666 MHz: 16 kB I-Cache 16 kB D-Cache Board: Sandpoint 8245 Unity ##Test not implemented yet## I2C: ready DRAM: 64 MB FLASH: S29GL128N, 16 MB In: serial Out: serial Err: serial Net: No ethernet found. Hit any key to stop autoboot: 0 ## Booting image at ff000000 ... Image Name: QNAP Linux-2.6.12.3 Image Type: PowerPC Linux Kernel Image (gzip compressed) Data Size: 1932980 Bytes = 1.8 MB Load Address: 00000000 Entry Point: 00000000 Verifying Checksum ... OK Uncompressing Kernel Image ... OK ## Loading RAMDisk Image at ff200000 ... Image Name: QNAP RAM Disk Image Type: PowerPC Linux RAMDisk Image (gzip compressed) Data Size: 2842607 Bytes = 2.7 MB Load Address: 00000000 Entry Point: 00000000 Verifying Checksum ... OK Loading Ramdisk to 03c77000, end 03f2cfef ... OK Linux version 2.6.12.3 (root@NasPPC.qnap.com.tw) (gcc version 3.4.3) #1 Mon Feb 12 14:04:38 CST 2007 Motorola SPS Sandpoint Test Platform Port by QNAP Systems, Inc. (sales@qnap.com.tw) Built 1 zonelists Kernel command line: console=ttyS0,115200n8 root=/dev/ram OpenPIC Version 1.2 (1 CPUs and 10 IRQ sources) at fdf40000 PID hash table entries: 512 (order: 9, 8192 bytes) Console: colour dummy device 80x25 Dentry cache hash table entries: 16384 (order: 4, 65536 bytes) Inode-cache hash table entries: 8192 (order: 3, 32768 bytes) Memory: 57968k available (2520k kernel code, 1376k data, 104k init, 0k highmem) Mount-cache hash table entries: 512 checking if image is initramfs...it isn't (no cpio magic); looks like an initrd Freeing initrd memory: 2775k freed NET: Registered protocol family 16 PCI: Probing PCI hardware PCI: Cannot allocate resource region 1 of device 0000:00:00.0 SCSI subsystem initialized usbcore: registered new driver usbfs usbcore: registered new driver hub VFS: Disk quotas dquot_6.5.1 Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) Installing knfsd (copyright (C) 1996 okir@monad.swb.de). NTFS driver 2.1.22 [Flags: R/W]. i8042.c: i8042 controller self test timeout. Serial: 8250/16550 driver $Revision: 1.1.1.1 $ 1 ports, IRQ sharing disabled ttyS0 at MMIO 0x0 (irq = 25) is a 16550A io scheduler noop registered io scheduler anticipatory registered io scheduler deadline registered io scheduler cfq registered RAMDISK driver initialized: 16 RAM disks of 40960K size 1024 blocksize loop: loaded (max 8 devices) Intel(R) PRO/1000 Network Driver - version 6.0.54-k2 Copyright (c) 1999-2004 Intel Corporation. libata(0000:00:0d.0): cache line size not set. Driver may not function libata 0000:00:0d.0: Applying R_ERR on DMA activate FIS errata fix create proc entry succeed! ata1: SATA max UDMA/100 cmd 0xC5000E80 ctl 0xC5000E8A bmdma 0xC5000E00 irq 16 ata2: SATA max UDMA/100 cmd 0xC5000EC0 ctl 0xC5000ECA bmdma 0xC5000E08 irq 16 ata1: dev 0 ATA, max UDMA/133, 156301488 sectors: lba48 ata1: dev 0 configured for UDMA/100 scsi0 : libata ata2: no device found (phy stat 00000000) scsi1 : libata Vendor: ATA Model: ST380817AS Rev: 3.42 Type: Direct-Access ANSI SCSI revision: 05 SCSI device sda: 156301488 512-byte hdwr sectors (80026 MB) SCSI device sda: drive cache: write back SCSI device sda: 156301488 512-byte hdwr sectors (80026 MB) SCSI device sda: drive cache: write back sda: unknown partition table Attached scsi disk sda at scsi0, channel 0, id 0, lun 0 Attached scsi generic sg0 at scsi0, channel 0, id 0, lun 0, type 0 physmap flash device: 1000000 at ff000000 phys_mapped_flash: Found 1 x16 devices at 0x0 in 8-bit bank Amd/Fujitsu Extended Query Table at 0x0040 phys_mapped_flash: CFI does not contain boot bank location. Assuming top. number of CFI chips: 1 cfi_cmdset_0002: Disabling erase-suspend-program due to code brokenness. cmdlinepart partition parsing not available RedBoot partition parsing not available Using physmap partition definition Creating 7 MTD partitions on "phys_mapped_flash": 0x00f00000-0x00f40000 : "U-Boot" 0x00000000-0x00200000 : "Kernel" 0x00200000-0x00500000 : "RootFS1" 0x00500000-0x00e00000 : "RootFS2" 0x00e00000-0x00f00000 : "Vendor" 0x00f40000-0x00f60000 : "U-Boot Config" 0x00f60000-0x01000000 : "NAS Config" ehci_hcd 0000:00:0e.2: NEC Corporation USB 2.0 ehci_hcd 0000:00:0e.2: new USB bus registered, assigned bus number 1 ehci_hcd 0000:00:0e.2: irq 17, io mem 0xbfffcf00 ehci_hcd 0000:00:0e.2: park 0 ehci_hcd 0000:00:0e.2: USB 2.0 initialized, EHCI 1.00, driver 10 Dec 2004 hub 1-0:1.0: USB hub found hub 1-0:1.0: 5 ports detected ohci_hcd 0000:00:0e.0: NEC Corporation USB ohci_hcd 0000:00:0e.0: new USB bus registered, assigned bus number 2 ohci_hcd 0000:00:0e.0: irq 17, io mem 0xbfffe000 hub 2-0:1.0: USB hub found hub 2-0:1.0: 3 ports detected ohci_hcd 0000:00:0e.1: NEC Corporation USB (#2) ohci_hcd 0000:00:0e.1: new USB bus registered, assigned bus number 3 ohci_hcd 0000:00:0e.1: irq 17, io mem 0xbfffd000 hub 3-0:1.0: USB hub found hub 3-0:1.0: 2 ports detected usbcore: registered new driver usblp drivers/usb/class/usblp.c: v0.13: USB Printer Device Class driver Initializing USB Mass Storage driver... usbcore: registered new driver usb-storage USB Mass Storage support registered. create proc entry succeed! NET: Registered protocol family 2 IP: routing cache hash table of 512 buckets, 4Kbytes TCP established hash table entries: 4096 (order: 3, 32768 bytes) TCP bind hash table entries: 4096 (order: 2, 16384 bytes) TCP: Hash tables configured (established 4096 bind 4096) NET: Registered protocol family 1 NET: Registered protocol family 17 NET: Registered protocol family 4 NET: Registered protocol family 5 RAMDISK: Compressed image found at block 0 VFS: Mounted root (ext2 filesystem) readonly. Freeing unused kernel memory: 104k init Recover device node.... dd: /dev/sda4: No such device or address sysinfo: Module loaded. I2C: No RXAK i2c-s3531a: i2c S-3531A/S-353X0A driver, (C) 2001-2005 Copyright QNAP Systems, Inc. rs5c372a: module license 'unspecified' taints kernel. I2C: Initialize rs5c372a RTC ok eth0: r10001.03, the Linux device driver for Realtek Ethernet Controllers at 0xbffe00, 00:33:44:55:66:77, IRQ 18 eth0: Auto-negotiation Enabled. Realtek RTL8169/8110 Family Gigabit Ethernet Network Adapter Driver version:1.03 Released date:2006/05/26 Link Status:Linked Link Speed:100Mbps Duplex mode:Full-Duplex I/O Base:0xBFFE00(I/O port) IRQ:18 initializing MAC address... Initializing main disk... log hidden config directory not exist, initial 10K log file... [OK] Starting Disk initialized: Checking plugged storage... Checking e-sata: Not exist NAS8A6C1C [: unknown operand Stopping network...Stopped. Starting network...DHCP Speed: 100 ddns update. add successInitializing random number generator... done. Starting thttpd services: thttpd. Starting Qthttpd services: Qthttpd. Starting FTP services: proftpd. Starting btd daemon... Starting ImRd service: msgget: Calling msgget(7843,950) msgget: msgget succeeded: msgid = 65538 . Starting periodic command scheduler: Apr 5 04:55:10 crond[521]: crond 2.3.2 dillon, started, log level 9 crond. use PIC1 as default image Starting ntpdate daemon: Starting stunnel services:2007.04.05 04:55:13 LOG7[569:1024]: RAND_status claims sufficient entropy for the PRNG 2007.04.05 04:55:13 LOG6[569:1024]: PRNG seeded successfully 2007.04.05 04:55:13 LOG4[569:1024]: Wrong permissions on /etc/stunnel/stunnel.pem 2007.04.05 04:55:13 LOG7[569:1024]: Certificate: /etc/stunnel/stunnel.pem 2007.04.05 04:55:13 LOG7[569:1024]: Key file: /etc/stunnel/stunnel.pem 2007.04.05 04:55:13 LOG7[569:1024]: SSL context initialized for service https stunnel. Starting TwonkyMedia: disabled. Starting iTune Services: disabled. Starting rsync server... EXT2-fs warning: checktime reached, running e2fsck is recommended Starting autorun script: telnetd: starting port: 13131; login program: /bin/naslogin Starting AppleTalk Services: disabled. Starting optwareldconfig: Remove `/lib' from `/etc/ld.so.conf' ldconfig: Remove `/usr/lib' from `/etc/ld.so.conf' ldconf Welcome to QNAP Systems Inc,. uClibc(192.168.1.34) development environment. NAS8A6C1C login: