Go to Memory Address: (default:0xB0020000) : 0x94000000 Jump to address 0x94000000 ... AR7 loader started... argc = 16384 = 0x4000 argv = 00000010 envp = 80004000 base = 94001f20 argc = 8 = 0x8 argv = 94301e80 envp = 94301c00 base = b4301f30 argv[] = go argv[] = console=ttyS0,115200 argv[] = debug argv[] = mtdparts=sinus:64k(boot)ro,-(flash) argv[] = root=/dev/nfs argv[] = rw argv[] = nfsroot=/nfsroot,nolock,rsize=1024,wsize=1024 argv[] = ip=192.168.2.1:192.168.2.2::255.255.255.0:sinus:eth0:off envp[] = nfsroot="nfs" envp[] = HWRevision="00" envp[] = flashsize="0x00200000" envp[] = memsize="0x01000000" envp[] = maca="00:04:0E:0A:D0:DF" envp[] = macb="00:04:0E:0A:D0:DE" envp[] = modetty0="115200,n,8,1,hw" Launching kernel decompressor. data = b4301f30 addr = b4301f30 lzma = 0x0000005d size (in) = 2797701 size (out) = 2797701 Kernel decompressor was successful ... launching kernel. loader.c:159, press any key to continue LINUX running... ar7_init_cmdline(8,94301e80) ar7_init_cmdline: cmdline=console=ttyS0,115200 debug mtdparts=sinus:64k(boot)ro,-(flash) root=/dev/nfs rw nfsroot=/nfsroot,nof ar7_init_env(94301c00) ar7_init_env: nfsroot ar7_init_env: HWRevision ar7_init_env: flashsize ar7_init_env: memsize ar7_init_env: maca ar7_init_env: macb ar7_init_env: modetty0 prom_getenv(macb) prom_getenv(maca) prom_getenv(maca) prom_getenv(maca) Linux version 2.6.19.2 (ar7@linux) (gcc version 4.1.2) #45 PREEMPT Thu Mar 29 20:45:18 CEST 2007 CPU revision is: 00018448 Clocks: prediv: 1, postdiv: 25, mul: 8 Clocks: prediv: 1, postdiv: 1, mul: 10 Determined physical RAM map: memory: 02000000 @ 14000000 (usable) On node 0 totalpages: 8192 DMA zone: 64 pages used for memmap DMA zone: 0 pages reserved DMA zone: 8128 pages, LIFO batch:0 Normal zone: 0 pages used for memmap Built 1 zonelists. Total pages: 8128 Kernel command line: console=ttyS0,115200 debug mtdparts=sinus:64k(boot)ro,-(flash) root=/dev/nfs rw nfsroot=/nfsroot,nolock,f Primary instruction cache 16kB, physically tagged, 4-way, linesize 16 bytes. Primary data cache 16kB, 4-way, linesize 16 bytes. Synthesized TLB refill handler (20 instructions). Synthesized TLB load handler fastpath (32 instructions). Synthesized TLB store handler fastpath (32 instructions). Synthesized TLB modify handler fastpath (31 instructions). PID hash table entries: 128 (order: 7, 512 bytes) Using 75.000 MHz high precision timer. Dentry cache hash table entries: 4096 (order: 2, 16384 bytes) Inode-cache hash table entries: 2048 (order: 1, 8192 bytes) Memory: 29608k/32772k available (2196k kernel code, 316k reserved, 396k data, 140k init) Calibrating delay loop... 6.42 BogoMIPS (lpj=32128) Mount-cache hash table entries: 512 Checking for 'wait' instruction... available. NET: Registered protocol family 16 vlynq0: regs 0x08611800, irq 29, mem 0x04000000 vlynq1: regs 0x08611c00, irq 33, mem 0x0c000000 PCI over VLYNQ emulation: probe of vlynq0 failed with error -22 PCI over VLYNQ emulation: probe of vlynq1 failed with error -22 Generic PHY: Registered new driver NET: Registered protocol family 2 IP route cache hash table entries: 256 (order: -2, 1024 bytes) TCP established hash table entries: 1024 (order: 0, 4096 bytes) TCP bind hash table entries: 512 (order: -1, 2048 bytes) TCP: Hash tables configured (established 1024 bind 512) TCP reno registered squashfs: version 3.0 (2006/03/15) Phillip Lougher io scheduler noop registered io scheduler deadline registered (default) ar7_wdt: disabling watchdog timer ar7_wdt: timer margin 59 seconds (prescale 65535, change 57180, freq 62500000) Serial: 8250/16550 driver $Revision: 1.90 $ 2 ports, IRQ sharing disabled serial8250: ttyS0 at MMIO 0x8610e00 (irq = 15) is a TI-AR7 serial8250: ttyS1 at MMIO 0x8610f00 (irq = 16) is a TI-AR7 Fixed PHY: Registered new driver device_bind_driver: device fixed@100:1 already bound cpmac-mii: probed cpmac: device eth0 (regs: 08612800, irq: 41, phy: fixed@100:1, mac: 00:00:00:12:34:56) cpmac: device eth1 (regs: 08610000, irq: 27, phy: 0:1f, mac: 00:00:00:12:34:56) physmap platform flash device: 00400000 at 10000000 physmap-flash.0: Found 1 x16 devices at 0x0 in 16-bit bank physmap-flash.0: Found an alias at 0x200000 for the chip at 0x0 Amd/Fujitsu Extended Query Table at 0x0040 number of CFI chips: 1 cfi_cmdset_0002: Disabling erase-suspend-program due to code brokenness. RedBoot partition parsing not available ar7part partition parsing not available mtd: Giving out device 0 to physmap-flash.0 Registered led device: ar7:status TCP cubic registered NET: Registered protocol family 1 NET: Registered protocol family 17 Time: MIPS clocksource has been installed. PHY: fixed@100:1 - Link is Up - 10/Half IP-Config: Complete: device=eth0, addr=192.168.2.1, mask=255.255.255.0, gw=255.255.255.255, host=sinus, domain=, nis-domain=(none), bootserver=192.168.2.2, rootserver=192.168.2.2, rootpath= Root-NFS: Mounting /nfsroot on server 192.168.2.2 as root Root-NFS: rsize = 1024, wsize = 1024, timeo = 0, retrans = 0 Root-NFS: acreg (min,max) = (3,60), acdir (min,max) = (30,60) Root-NFS: nfsd port = -1, mountd port = 0, flags = 00000200 Looking up port of RPC 100003/2 on 192.168.2.2 portmap: server 192.168.2.2 not responding, timed out Root-NFS: Unable to get nfsd port number from server, using default Root-NFS: Portmapper on server returned 2049 as nfsd port Looking up port of RPC 100005/1 on 192.168.2.2 portmap: server 192.168.2.2 not responding, timed out Root-NFS: Unable to get mountd port number from server, using default Root-NFS: mountd port is 627 NFS: nfs_mount(c0a80202:/nfsroot) mount: server 192.168.2.2 not responding, timed out Root-NFS: Server returned error -5 while mounting /nfsroot VFS: Unable to mount root fs via NFS, trying floppy. VFS: Cannot open root device "nfs" or unknown-block(2,0) Please append a correct "root=" boot option Kernel panic - not syncing: VFS: Unable to mount root fs on unknown-block(2,0) <0>Rebooting in 3 seconds..Reboot