# /etc/X11/xorg.conf (xorg X Window System server configuration file)
#
# This file was generated by dexconf, the Debian X Configuration tool, using
# values from the debconf database.
#
# Edit this file with caution, and see the /etc/X11/xorg.conf manual page.
# (Type "man /etc/X11/xorg.conf" at the shell prompt.)
#
# This file is automatically updated on xserver-xorg package upgrades *only*
# if it has not been modified since the last upgrade of the xserver-xorg
# package.
#
# If you have edited this file but would like it to be automatically updated
# again, run the following command:
#   sudo dpkg-reconfigure -phigh xserver-xorg

Section "ServerLayout"
	Identifier     "Default Layout"
	Screen      0  "aticonfig-Screen[0]" 0 0
	InputDevice    "Generic Keyboard"
	InputDevice    "Configured Mouse"
	InputDevice    "stylus" "SendCoreEvents"
	InputDevice    "cursor" "SendCoreEvents"
	InputDevice    "eraser" "SendCoreEvents"
EndSection

Section "Files"

  # path to defoma fonts
	FontPath     "/usr/share/X11/fonts/misc"
	FontPath     "/usr/share/X11/fonts/cyrillic"
	FontPath     "/usr/share/X11/fonts/100dpi/:unscaled"
	FontPath     "/usr/share/X11/fonts/75dpi/:unscaled"
	FontPath     "/usr/share/X11/fonts/Type1"
	FontPath     "/usr/share/X11/fonts/100dpi"
	FontPath     "/usr/share/X11/fonts/75dpi"
	FontPath     "/usr/share/fonts/X11/misc"
	FontPath     "/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType"
EndSection

Section "Module"
	Load  "i2c"
	Load  "bitmap"
	Load  "ddc"
	Load  "extmod"
	Load  "freetype"
	Load  "int10"
	Load  "type1"
	Load  "vbe"
	Load  "glx"
	Load  "GLcore"
	Load  "v4l"
	Load  "dri"
EndSection

Section "ServerFlags"
	Option	    "AIGLX" "off"
EndSection

Section "InputDevice"
	Identifier  "Generic Keyboard"
	Driver      "kbd"
	Option	    "CoreKeyboard"
	Option	    "XkbRules" "xorg"
	Option	    "XkbModel" "pc105"
	Option	    "XkbLayout" "gb"
	Option	    "XkbOptions" "lv3:ralt_switch"
EndSection

Section "InputDevice"
	Identifier  "Configured Mouse"
	Driver      "mouse"
	Option	    "CorePointer"
	Option	    "Device" "/dev/input/mice"
	Option	    "Protocol" "ExplorerPS/2"
	Option	    "ZAxisMapping" "4 5"
	Option	    "Emulate3Buttons" "true"
EndSection

Section "InputDevice"

  # /dev/input/event
  # for USB
	Identifier  "stylus"
	Driver      "wacom"
	Option	    "Device" "/dev/wacom"# Change to 
	Option	    "Type" "stylus"
	Option	    "ForceDevice" "ISDV4"# Tablet PC ONLY
EndSection

Section "InputDevice"

  # /dev/input/event
  # for USB
	Identifier  "eraser"
	Driver      "wacom"
	Option	    "Device" "/dev/wacom"# Change to 
	Option	    "Type" "eraser"
	Option	    "ForceDevice" "ISDV4"# Tablet PC ONLY
EndSection

Section "InputDevice"

  # /dev/input/event
  # for USB
	Identifier  "cursor"
	Driver      "wacom"
	Option	    "Device" "/dev/wacom"# Change to 
	Option	    "Type" "cursor"
	Option	    "ForceDevice" "ISDV4"# Tablet PC ONLY
EndSection

Section "Monitor"
	Identifier   "Acer AL1916W"
	VendorName   "Generic"
	ModelName    "Flat Panel 1440x900"
	HorizSync    31.5 - 90.0
	VertRefresh  60.0 - 60.0
	Gamma        1
	ModeLine     "800x600@60" 40.0 800 840 968 1056 600 601 605 628 +hsync +vsync
	ModeLine     "1280x768@60" 80.1 1280 1344 1480 1680 768 769 772 795 -hsync +vsync
	ModeLine     "1600x1024@60" 136.4 1600 1704 1872 2144 1024 1025 1028 1060 -hsync +vsync
	ModeLine     "1680x1050@60" 147.1 1680 1784 1968 2256 1050 1051 1054 1087 -hsync +vsync
	ModeLine     "1920x1200@60" 193.2 1920 2048 2256 2592 1200 1201 1204 1242 -hsync +vsync
EndSection

Section "Monitor"

 # 
	Identifier   "monitor1"
	Gamma        1
EndSection

Section "Monitor"
	Identifier   "aticonfig-Monitor[0]"
	Option	    "VendorName" "ATI Proprietary Driver"
	Option	    "ModelName" "Generic Autodetecting Monitor"
	Option	    "DPMS" "true"
EndSection

Section "Device"
	Identifier  "ATI Technologies, Inc. RV350 AS [Radeon 9600]"
	Driver      "ati"
	BoardName   "ati"
	Option	    "MergedFB" "off"
	BusID       "PCI:1:0:0"
EndSection

Section "Device"

 # 
	Identifier  "device1"
	Driver      "ati"
	BoardName   "ati"
	Option	    "MergedFB" "off"
	BusID       "PCI:1:0:0"
	Screen      1
EndSection

Section "Device"
	Identifier  "aticonfig-Device[0]"
	Driver      "fglrx"
	Option	    "VideoOverlay" "on"
	Option	    "OpenGLOverlay" "off"
EndSection

Section "Screen"
	Identifier "Default Screen"
	Device     "ATI Technologies, Inc. RV350 AS [Radeon 9600]"
	Monitor    "Acer AL1916W"
	DefaultDepth     24
	SubSection "Display"
		Depth     24
		Modes    "1280x768@60" "1600x1024@60" "800x600@60" "1680x1050@60" "1920x1200@60"
	EndSubSection
EndSection

Section "Screen"

 # 
	Identifier "screen1"
	Device     "device1"
	Monitor    "monitor1"
	DefaultDepth     24
EndSection

Section "Screen"
	Identifier "aticonfig-Screen[0]"
	Device     "aticonfig-Device[0]"
	Monitor    "aticonfig-Monitor[0]"
	DefaultDepth     24
	SubSection "Display"
		Viewport   0 0
		Depth     24
	EndSubSection
EndSection

Section "DRI"
	Mode         0666
EndSection

Section "Extensions"
	Option	    "Composite" "Disable"
EndSection

Section "Extensions"
Option "Composite" "false"
EndSection