Linux version 2.6.15-archck (root@iphtop) (gcc version 4.0.3 20051222 (prerelease)) #1 SMP PREEMPT Tue Feb 14 19:49:58 EST 2006 BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) BIOS-e820: 00000000000e8000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 000000007ff30000 (usable) BIOS-e820: 000000007ff30000 - 000000007ff40000 (ACPI data) BIOS-e820: 000000007ff40000 - 000000007fff0000 (ACPI NVS) BIOS-e820: 000000007fff0000 - 0000000080000000 (reserved) BIOS-e820: 00000000ffb80000 - 0000000100000000 (reserved) 1151MB HIGHMEM available. 896MB LOWMEM available. found SMP MP-table at 000ff780 On node 0 totalpages: 524080 DMA zone: 4096 pages, LIFO batch:0 DMA32 zone: 0 pages, LIFO batch:0 Normal zone: 225280 pages, LIFO batch:31 HighMem zone: 294704 pages, LIFO batch:31 DMI 2.3 present. ACPI: RSDP (v000 ACPIAM ) @ 0x000f9fb0 ACPI: RSDT (v001 A M I OEMRSDT 0x05000306 MSFT 0x00000097) @ 0x7ff30000 ACPI: FADT (v002 A M I OEMFACP 0x05000306 MSFT 0x00000097) @ 0x7ff30200 ACPI: MADT (v001 A M I OEMAPIC 0x05000306 MSFT 0x00000097) @ 0x7ff30390 ACPI: OEMB (v001 A M I OEMBIOS 0x05000306 MSFT 0x00000097) @ 0x7ff40040 ACPI: DSDT (v001 P4C81 P4C81061 0x00000061 INTL 0x02002026) @ 0x00000000 ACPI: PM-Timer IO Port: 0x808 ACPI: Local APIC address 0xfee00000 ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) Processor #0 15:2 APIC version 20 ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled) Processor #1 15:2 APIC version 20 ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23 ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) ACPI: IRQ0 used by override. ACPI: IRQ2 used by override. ACPI: IRQ9 used by override. Enabling APIC mode: Flat. Using 1 I/O APICs Using ACPI (MADT) for SMP configuration information Allocating PCI resources starting at 88000000 (gap: 80000000:7fb80000) Built 1 zonelists Kernel command line: root=/dev/hda3 ro video=vesafb:ywrap,mtrr,1024x768-32@60 splash=silent,theme:darch quiet console=tty1 mapped APIC to ffffd000 (fee00000) mapped IOAPIC to ffffc000 (fec00000) Initializing CPU#0 PID hash table entries: 4096 (order: 12, 65536 bytes) Using 3579 PM timer ticks per jiffy Detected 2999.075 MHz processor. Using pmtmr for high-res timesource Console: colour VGA+ 80x25 Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) Memory: 2068836k/2096320k available (2067k kernel code, 26212k reserved, 750k data, 216k init, 1178816k highmem) Checking if this processor honours the WP bit even in supervisor mode... Ok. Calibrating delay using timer specific routine.. 6000.76 BogoMIPS (lpj=3000384) Security Framework v1.0.0 initialized Capability LSM initialized Mount-cache hash table entries: 512 CPU: After generic identify, caps: bfebfbff 00000000 00000000 00000000 00004400 00000000 00000000 CPU: After vendor identify, caps: bfebfbff 00000000 00000000 00000000 00004400 00000000 00000000 CPU: Trace cache: 12K uops, L1 D cache: 8K CPU: L2 cache: 512K CPU: Physical Processor ID: 0 CPU: After all inits, caps: bfebfbff 00000000 00000000 00000080 00004400 00000000 00000000 Intel machine check architecture supported. Intel machine check reporting enabled on CPU#0. CPU0: Intel P4/Xeon Extended MCE MSRs (12) available mtrr: v2.0 (20020519) Enabling fast FPU save and restore... done. Enabling unmasked SIMD FPU exception support... done. Checking 'hlt' instruction... OK. checking if image is initramfs... it is Freeing initrd memory: 3275k freed ACPI: Looking for DSDT in initramfs... error, file /DSDT.aml not found. CPU0: Intel(R) Pentium(R) 4 CPU 3.00GHz stepping 09 Booting processor 1/1 eip 3000 Initializing CPU#1 Calibrating delay using timer specific routine.. 5996.27 BogoMIPS (lpj=2998135) CPU: After generic identify, caps: bfebfbff 00000000 00000000 00000000 00004400 00000000 00000000 CPU: After vendor identify, caps: bfebfbff 00000000 00000000 00000000 00004400 00000000 00000000 CPU: Trace cache: 12K uops, L1 D cache: 8K CPU: L2 cache: 512K CPU: Physical Processor ID: 0 CPU: After all inits, caps: bfebfbff 00000000 00000000 00000080 00004400 00000000 00000000 Intel machine check architecture supported. Intel machine check reporting enabled on CPU#1. CPU1: Intel P4/Xeon Extended MCE MSRs (12) available CPU1: Intel(R) Pentium(R) 4 CPU 3.00GHz stepping 09 Total of 2 processors activated (11997.03 BogoMIPS). ENABLING IO-APIC IRQs ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1 checking TSC synchronization across 2 CPUs: passed. Brought up 2 CPUs NET: Registered protocol family 16 ACPI: bus type pci registered PCI: PCI BIOS revision 2.10 entry at 0xf0031, last bus=2 PCI: Using configuration type 1 ACPI: Subsystem revision 20050902 ACPI: Interpreter enabled ACPI: Using IOAPIC for interrupt routing ACPI: PCI Root Bridge [PCI0] (0000:00) PCI: Probing PCI hardware (bus 00) PCI quirk: region 0800-087f claimed by ICH4 ACPI/GPIO/TCO PCI quirk: region 0480-04bf claimed by ICH4 GPIO PCI: Ignoring BAR0-3 of IDE controller 0000:00:1f.1 Boot video device is 0000:01:00.0 PCI: Transparent bridge - 0000:00:1e.0 ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P4._PRT] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 *10 11 12 14 15) ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *10 11 12 14 15) ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *5 6 7 10 11 12 14 15) ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 *11 12 14 15) ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 *5 6 7 10 11 12 14 15) ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 *11 12 14 15) ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 10 *11 12 14 15) Linux Plug and Play Support v0.97 (c) Adam Belay pnp: PnP ACPI init pnp: PnP ACPI: found 14 devices SCSI subsystem initialized PCI: Using ACPI for IRQ routing PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report pnp: 00:0a: ioport range 0x680-0x6ff has been reserved pnp: 00:0a: ioport range 0x290-0x297 has been reserved PCI: Bridge: 0000:00:01.0 IO window: disabled. MEM window: fc900000-fe9fffff PREFETCH window: 9ff00000-bfefffff PCI: Bridge: 0000:00:1e.0 IO window: d000-dfff MEM window: fea00000-feafffff PREFETCH window: disabled. PCI: Setting latency timer of device 0000:00:1e.0 to 64 apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac) apm: disabled - APM is not SMP safe. highmem bounce pool size: 64 pages VFS: Disk quotas dquot_6.5.1 Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) Installing knfsd (copyright (C) 1996 okir@monad.swb.de). Initializing Cryptographic API io scheduler noop registered io scheduler anticipatory registered io scheduler deadline registered io scheduler cfq registered vesafb: unrecognized option mtrr vesafb: NVIDIA Corporation, NV35 Board - p172-2p , Chip Rev (OEM: NVIDIA) vesafb: VBE version: 3.0 vesafb: protected mode interface info at c000:e800 vesafb: pmi: set display start = c00ce836, set palette = c00ce8a0 vesafb: pmi: ports = 3b4 3b5 3ba 3c0 3c1 3c4 3c5 3c6 3c7 3c8 3c9 3cc 3ce 3cf 3d0 3d1 3d2 3d3 3d4 3d5 3da vesafb: VBIOS/hardware supports DDC2 transfers vesafb: monitor limits: vf = 160 Hz, hf = 96 kHz, clk = 200 MHz vesafb: scrolling: ywrap using protected mode interface, yres_virtual=6144 Console: switching to colour frame buffer device 128x48 fbsplash: console 0 using theme 'darch' fbsplash: switched splash state to 'on' on console 0 vesafb: framebuffer at 0xa0000000, mapped to 0xf8880000, using 24576k, total 262144k fb0: VESA VGA frame buffer device ACPI: Power Button (FF) [PWRF] ACPI: Power Button (CM) [PWRB] isapnp: Scanning for PnP cards... isapnp: No Plug & Play device found PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12 serio: i8042 AUX port at 0x60,0x64 irq 12 serio: i8042 KBD port at 0x60,0x64 irq 1 Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing disabled serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A 00:06: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A 00:07: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A Floppy drive(s): fd0 is 1.44M FDC 0 is a post-1991 82077 RAMDISK driver initialized: 16 RAM disks of 16384K size 1024 blocksize loop: loaded (max 8 devices) mice: PS/2 mouse device common for all mice NET: Registered protocol family 2 IP route cache hash table entries: 131072 (order: 7, 524288 bytes) TCP established hash table entries: 262144 (order: 9, 3145728 bytes) TCP bind hash table entries: 65536 (order: 7, 786432 bytes) TCP: Hash tables configured (established 262144 bind 65536) TCP reno registered TCP bic registered NET: Registered protocol family 1 NET: Registered protocol family 10 lo: Disabled Privacy Extensions IPv6 over IPv4 tunneling driver NET: Registered protocol family 17 Starting balanced_irq Using IPI No-Shortcut mode Suspend2 Core. Suspend2 Compression Driver loading. Suspend2 Encryption Driver loading. Suspend2 Swap Writer loading. Suspend2 FileWriter loading. ACPI wakeup devices: P0P4 MC97 USB1 USB2 USB3 USB4 EUSB PS2K PS2M ILAN PWRB ACPI: (supports S0 S1 S3 S4 S5) Freeing unused kernel memory: 216k freed input: AT Translated Set 2 keyboard as /class/input/input0 Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx ICH5: IDE controller at PCI slot 0000:00:1f.1 PCI: Enabling device 0000:00:1f.1 (0005 -> 0007) ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 18 (level, low) -> IRQ 16 ICH5: chipset revision 2 ICH5: not 100% native mode: will probe irqs later ide0: BM-DMA at 0xfc00-0xfc07, BIOS settings: hda:DMA, hdb:DMA ide1: BM-DMA at 0xfc08-0xfc0f, BIOS settings: hdc:DMA, hdd:DMA Probing IDE interface ide0... logips2pp: Detected unknown logitech mouse model 101 input: ImExPS/2 Logitech Explorer Mouse as /class/input/input1 hda: Maxtor 6Y120L0, ATA DISK drive hdb: Maxtor 4G120J6, ATA DISK drive ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 Probing IDE interface ide1... hdc: SAMSUNG CDRW/DVD SM-352B, ATAPI CD/DVD-ROM drive hdd: PHILIPS DVDR1640P, ATAPI CD/DVD-ROM drive ide1 at 0x170-0x177,0x376 on irq 15 hda: max request size: 128KiB hda: 240121728 sectors (122942 MB) w/2048KiB Cache, CHS=65535/16/63, UDMA(100) hda: cache flushes supported hda: hda1 hda2 hda3 hda4 < hda5 hda6 hda7 hda8 > hdb: max request size: 1024KiB hdb: 240121728 sectors (122942 MB) w/2048KiB Cache, CHS=16383/255/63, UDMA(100) hdb: cache flushes not supported hdb: hdb1 hdc: ATAPI 52X DVD-ROM CD-R/RW drive, 2048kB Cache, UDMA(33) Uniform CD-ROM driver Revision: 3.20 hdd: ATAPI 40X DVD-ROM DVD-R CD-R/RW drive, 2048kB Cache, UDMA(33) ide-floppy driver 0.99.newide Emulex LightPulse Fibre Channel SCSI driver 8.1.0 Copyright(c) 2004-2005 Emulex. All rights reserved. QLogic Fibre Channel HBA Driver seagate: ST0x/TMC-8xx not detected. st: Version 20050830, fixed bufsize 32768, s/g segs 256 qlogicfas: no cards were found, please specify I/O address and IRQ using iobase= and irq= optionsFailed initialization of WD-7000 SCSI card! 3ware 9000 Storage Controller device driver for Linux v2.26.02.004. iscsi: registered transport (tcp) sym53c416.c: Version 1.0.0-ac scsi: Detection failed (no card) GDT-HA: Storage RAID Controller Driver. Version: 3.04 GDT-HA: Found 0 PCI Storage RAID Controllers 3ware Storage Controller device driver for Linux v1.26.02.001. imm: Version 2.05 (for Linux 2.4.0) ipr: IBM Power RAID SCSI Device Driver version: 2.1.0 (October 31, 2005) Adaptec aacraid driver (1.1-4 Feb 14 2006 19:48:43) nsp32: loading... libata version 1.20 loaded. osst :I: Tape driver with OnStream support version 0.99.3 osst :I: $Id: osst.c,v 1.73 2005/01/01 21:13:34 wriede Exp $ NCR53c406a: no available ports found ata_piix 0000:00:1f.2: version 1.05 ACPI: PCI Interrupt 0000:00:1f.2[A] -> GSI 18 (level, low) -> IRQ 16 PCI: Setting latency timer of device 0000:00:1f.2 to 64 ata1: SATA max UDMA/133 cmd 0xEFE0 ctl 0xEFAE bmdma 0xEF90 irq 16 ata2: SATA max UDMA/133 cmd 0xEFA0 ctl 0xEFAA bmdma 0xEF98 irq 16 ata1: dev 0 cfg 49:2f00 82:7c6b 83:7b09 84:4003 85:7c69 86:3a01 87:4003 88:207f ata1: dev 0 ATA-7, max UDMA/133, 240121728 sectors: LBA ata1: dev 0 configured for UDMA/133 scsi2 : ata_piix ata2: dev 0 cfg 49:2f00 82:7c6b 83:7f09 84:4003 85:7c69 86:3e01 87:4003 88:207f ata2: dev 0 ATA-7, max UDMA/133, 398297088 sectors: LBA48 ata2: dev 0 configured for UDMA/133 scsi3 : ata_piix Vendor: ATA Model: Maxtor 6Y120M0 Rev: YAR5 Type: Direct-Access ANSI SCSI revision: 05 SCSI device sda: 240121728 512-byte hdwr sectors (122942 MB) SCSI device sda: drive cache: write back SCSI device sda: 240121728 512-byte hdwr sectors (122942 MB) SCSI device sda: drive cache: write back sda: sda1 sd 2:0:0:0: Attached scsi disk sda sd 2:0:0:0: Attached scsi generic sg0 type 0 Vendor: ATA Model: Maxtor 6Y200M0 Rev: YAR5 Type: Direct-Access ANSI SCSI revision: 05 SCSI device sdb: 398297088 512-byte hdwr sectors (203928 MB) SCSI device sdb: drive cache: write back SCSI device sdb: 398297088 512-byte hdwr sectors (203928 MB) SCSI device sdb: drive cache: write back sdb: sdb1 sd 3:0:0:0: Attached scsi disk sdb sd 3:0:0:0: Attached scsi generic sg1 type 0 megaraid cmm: 2.20.2.6 (Release Date: Mon Mar 7 00:01:03 EST 2005) megasas: 00.00.02.00-rc4 Fri Sep 16 12:37:08 EDT 2005 megaraid: 2.20.4.6 (Release Date: Mon Mar 07 12:27:22 EST 2005) Loading Adaptec I2O RAID: Version 2.4 Build 5go Detecting Adaptec I2O RAID controllers... Fusion MPT base driver 3.03.04 Copyright (c) 1999-2005 LSI Logic Corporation Fusion MPT misc device (ioctl) driver 3.03.04 mptctl: Registered with Fusion MPT base driver mptctl: /dev/mptctl @ (major,minor=10,220) Fusion MPT SAS Host driver 3.03.04 Fusion MPT SPI Host driver 3.03.04 Fusion MPT FC Host driver 3.03.04 JFS: nTxBlock = 8192, nTxLock = 65536 SGI XFS with ACLs, security attributes, large block numbers, no debug enabled Suspend2 2.2: You need to use a resume2= command line parameter to tell Suspend2 where to look for an image. Suspend2 2.2: Resume2 parameter is empty. Suspending will be disabled. Suspend2 2.2: Missing or invalid storage location (resume2= parameter). Please correct and rerun lilo (or equivalent) before suspending. ReiserFS: hda3: found reiserfs format "3.6" with standard journal ReiserFS: hda3: using ordered data mode ReiserFS: hda3: journal params: device hda3, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30 ReiserFS: hda3: checking transaction log (hda3) ReiserFS: hda3: Using r5 hash to sort names CSLIP: code copyright 1989 Regents of the University of California PPP generic driver version 2.4.2 tun: Universal TUN/TAP device driver, 1.6 tun: (C) 1999-2004 Max Krasnyansky usbcore: registered new driver usbfs usbcore: registered new driver hub USB Universal Host Controller Interface driver v2.3 ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 16 (level, low) -> IRQ 17 PCI: Setting latency timer of device 0000:00:1d.0 to 64 uhci_hcd 0000:00:1d.0: UHCI Host Controller uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1 uhci_hcd 0000:00:1d.0: irq 17, io base 0x0000ef20 hub 1-0:1.0: USB hub found hub 1-0:1.0: 2 ports detected input: PC Speaker as /class/input/input2 pci_hotplug: PCI Hot Plug PCI Core version: 0.5 shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 usb 1-1: new full speed USB device using uhci_hcd and address 2 hub 1-1:1.0: USB hub found hub 1-1:1.0: 4 ports detected Linux agpgart interface v0.101 (c) Dave Jones agpgart: Detected an Intel i875 Chipset. agpgart: AGP aperture is 256M @ 0xd0000000 ACPI: PCI Interrupt 0000:00:1d.7[D] -> GSI 23 (level, low) -> IRQ 18 PCI: Setting latency timer of device 0000:00:1d.7 to 64 ehci_hcd 0000:00:1d.7: EHCI Host Controller ehci_hcd 0000:00:1d.7: debug port 1 PCI: cache line size of 128 is not supported by device 0000:00:1d.7 ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2 ehci_hcd 0000:00:1d.7: irq 18, io mem 0xfebffc00 ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 hub 2-0:1.0: USB hub found hub 2-0:1.0: 2 ports detected usb 1-1: USB disconnect, address 2 hw_random hardware driver 1.0.0 loaded usb 2-1: new high speed USB device using ehci_hcd and address 2 parport: PnPBIOS parport detected. parport0: PC-style at 0x378 (0x778), irq 7 [PCSPP,TRISTATE,EPP] hub 2-1:1.0: USB hub found hub 2-1:1.0: 4 ports detected usb 2-1.3: new full speed USB device using ehci_hcd and address 3 nvidia: module license 'NVIDIA' taints kernel. ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 16 (level, low) -> IRQ 17 NVRM: loading NVIDIA Linux x86 NVIDIA Kernel Module 1.0-8178 Wed Dec 14 16:22:51 PST 2005 Real Time Clock Driver v1.12 ieee1394: Initialized config rom entry `ip1394' ohci1394: $Rev: 1313 $ Ben Collins ACPI: PCI Interrupt 0000:02:03.0[A] -> GSI 20 (level, low) -> IRQ 19 PCI: Via IRQ fixup for 0000:02:03.0, from 11 to 3 lp0: using parport0 (interrupt-driven). ohci1394: fw-host0: OHCI-1394 1.0 (PCI): IRQ=[19] MMIO=[feaff800-feafffff] Max Packet=[2048] ACPI: PCI Interrupt 0000:02:05.0[A] -> GSI 22 (level, low) -> IRQ 20 skge 1.3 addr 0xfeaf8000 irq 20 chip Yukon rev 1 skge eth0: addr 00:0c:6e:4c:e0:59 Linux video capture interface: v1.00 ACPI: PCI Interrupt 0000:02:0d.2[B] -> GSI 22 (level, low) -> IRQ 20 drivers/usb/media/ov511.c: USB OV511+ video device found drivers/usb/media/ov511.c: model: Creative Labs WebCam 3 ohci1394: fw-host1: OHCI-1394 1.1 (PCI): IRQ=[20] MMIO=[feaff000-feaff7ff] Max Packet=[2048] gameport: EMU10K1 is pci0000:02:0d.1/gameport0, io 0xdfe0, speed 1325kHz ppdev: user-space parallel port driver drivers/usb/media/ov511.c: Sensor is an OV7620 ACPI: PCI Interrupt 0000:02:0d.0[A] -> GSI 21 (level, low) -> IRQ 21 Installing spdif_bug patch: Audigy 2 EX [1005] drivers/usb/media/ov511.c: Device at usb-0000:00:1d.7-1.3 registered to minor 0 usbcore: registered new driver ov511 drivers/usb/media/ov511.c: v1.64 for Linux 2.5 : ov511 USB Camera Driver ieee1394: Host added: ID:BUS[0-00:1023] GUID[00e01800001f824e] eth1394: $Rev: 1312 $ Ben Collins eth1394: eth1: IEEE-1394 IPv4 over 1394 Ethernet (fw-host0) eth1394: eth2: IEEE-1394 IPv4 over 1394 Ethernet (fw-host1) ieee1394: The root node is not cycle master capable; selecting a new root node and resetting... ieee1394: Host added: ID:BUS[1-01:1023] GUID[00023c00c100cc21] cpufreq: No nForce2 chipset. p4-clockmod: P4/Xeon(TM) CPU On-Demand Clock Modulation available powernow: This module only works with AMD K7 CPUs Adding 2096472k swap on /dev/hda2. Priority:-1 extents:1 across:2096472k ReiserFS: hda5: found reiserfs format "3.6" with standard journal ReiserFS: hda5: using ordered data mode ReiserFS: hda5: journal params: device hda5, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30 ReiserFS: hda5: checking transaction log (hda5) ReiserFS: hda5: Using r5 hash to sort names ReiserFS: hda6: found reiserfs format "3.6" with standard journal ReiserFS: hda6: using ordered data mode ReiserFS: hda6: journal params: device hda6, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30 ReiserFS: hda6: checking transaction log (hda6) ReiserFS: hda6: Using r5 hash to sort names Initializing USB Mass Storage driver... usbcore: registered new driver usb-storage USB Mass Storage support registered. usbcore: registered new driver usblp drivers/usb/class/usblp.c: v0.13: USB Printer Device Class driver usbcore: registered new driver hiddev usbcore: registered new driver usbhid drivers/usb/input/hid-core.c: v2.6:USB HID core driver sbp2: $Rev: 1306 $ Ben Collins ieee1394: sbp2: Driver forced to serialize I/O (serialize_io=1) ieee1394: sbp2: Try serialize_io=0 for better performance skge eth0: enabling interface ADDRCONF(NETDEV_UP): eth0: link is not ready skge eth0: Link is up at 100 Mbps, full duplex, flow control tx and rx ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready eth0: no IPv6 routers present agpgart: Found an AGP 3.0 compliant device at 0000:00:00.0. agpgart: Putting AGP V3 device at 0000:00:00.0 into 8x mode agpgart: Putting AGP V3 device at 0000:01:00.0 into 8x mode agpgart: Found an AGP 3.0 compliant device at 0000:00:00.0. agpgart: Putting AGP V3 device at 0000:00:00.0 into 8x mode agpgart: Putting AGP V3 device at 0000:01:00.0 into 8x mode usb 2-2: new high speed USB device using ehci_hcd and address 4 scsi4 : SCSI emulation for USB Mass Storage devices usb-storage: device found at 4 usb-storage: waiting for device to settle before scanning Vendor: WD Model: 2500BB External Rev: 0412 Type: Direct-Access ANSI SCSI revision: 00 SCSI device sdc: 488397168 512-byte hdwr sectors (250059 MB) sdc: assuming drive cache: write through SCSI device sdc: 488397168 512-byte hdwr sectors (250059 MB) sdc: assuming drive cache: write through sdc: sdc1 sd 4:0:0:0: Attached scsi disk sdc sd 4:0:0:0: Attached scsi generic sg2 type 0 usb-storage: device scan complete UDF-fs: No VRS found Unable to identify CD-ROM format. usb 2-2: USB disconnect, address 4 agpgart: Found an AGP 3.0 compliant device at 0000:00:00.0. agpgart: Putting AGP V3 device at 0000:00:00.0 into 8x mode agpgart: Putting AGP V3 device at 0000:01:00.0 into 8x mode agpgart: Found an AGP 3.0 compliant device at 0000:00:00.0. agpgart: Putting AGP V3 device at 0000:00:00.0 into 8x mode agpgart: Putting AGP V3 device at 0000:01:00.0 into 8x mode agpgart: Found an AGP 3.0 compliant device at 0000:00:00.0. agpgart: Putting AGP V3 device at 0000:00:00.0 into 8x mode agpgart: Putting AGP V3 device at 0000:01:00.0 into 8x mode