mdione@luxury:~$ sudo smartctl -a /dev/hdb smartctl version 5.32 Copyright (C) 2002-4 Bruce Allen Home page is http://smartmontools.sourceforge.net/ === START OF INFORMATION SECTION === Device Model: WDC WD600AB-00BVA0 Serial Number: WD-WMA7E1062591 Firmware Version: 21.01H21 Device is: In smartctl database [for details use: -P show] ATA Version is: 5 ATA Standard is: Exact ATA specification draft version not indicated Local Time is: Tue Feb 21 21:06:01 2006 ART SMART support is: Available - device has SMART capability. SMART support is: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x84) Offline data collection activity was suspended by an interrupting command from host. Auto Offline Data Collection: Enabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: (3168) seconds. Offline data collection capabilities: (0x3b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. Conveyance Self-test supported. No Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. No General Purpose Logging support. Short self-test routine recommended polling time: ( 2) minutes. Extended self-test routine recommended polling time: ( 56) minutes. Conveyance self-test routine recommended polling time: ( 5) minutes. SMART Attributes Data Structure revision number: 16 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE 1 Raw_Read_Error_Rate 0x000b 195 174 051 Pre-fail Always - 164 3 Spin_Up_Time 0x0007 121 109 021 Pre-fail Always - 3041 4 Start_Stop_Count 0x0032 100 100 040 Old_age Always - 450 5 Reallocated_Sector_Ct 0x0032 199 199 112 Old_age Always - 2 7 Seek_Error_Rate 0x000b 200 200 051 Pre-fail Always - 0 9 Power_On_Hours 0x0032 054 054 000 Old_age Always - 33959 10 Spin_Retry_Count 0x0013 100 100 051 Pre-fail Always - 0 11 Calibration_Retry_Count 0x0013 100 100 051 Pre-fail Always - 0 12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 447 196 Reallocated_Event_Count 0x0032 198 198 000 Old_age Always - 2 197 Current_Pending_Sector 0x0012 200 199 000 Old_age Always - 2 198 Offline_Uncorrectable 0x0012 200 199 000 Old_age Always - 0 199 UDMA_CRC_Error_Count 0x000a 200 253 000 Old_age Always - 109 200 Multi_Zone_Error_Rate 0x0009 181 126 051 Pre-fail Offline - 232 SMART Error Log Version: 1 ATA Error Count: 59 (device log contains only the most recent five errors) CR = Command Register [HEX] FR = Features Register [HEX] SC = Sector Count Register [HEX] SN = Sector Number Register [HEX] CL = Cylinder Low Register [HEX] CH = Cylinder High Register [HEX] DH = Device/Head Register [HEX] DC = Device Command Register [HEX] ER = Error register [HEX] ST = Status register [HEX] Powered_Up_Time is measured from power on, and printed as DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes, SS=sec, and sss=millisec. It "wraps" after 49.710 days. Error 59 occurred at disk power-on lifetime: 118 hours (4 days + 22 hours) When the command that caused the error occurred, the device was doing SMART Offline or Self-test. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 40 51 02 07 06 00 e0 Error: UNC 2 sectors at LBA = 0x00000607 = 1543 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- c8 00 02 06 06 00 e0 00 00:53:31.150 READ DMA c8 00 04 04 06 00 e0 00 00:53:25.850 READ DMA c8 00 06 02 06 00 e0 00 00:53:20.750 READ DMA c8 00 08 00 06 00 e0 00 00:53:15.500 READ DMA c8 00 80 80 07 00 e0 00 00:53:15.450 READ DMA Error 58 occurred at disk power-on lifetime: 118 hours (4 days + 22 hours) When the command that caused the error occurred, the device was doing SMART Offline or Self-test. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 40 51 04 05 06 00 e0 Error: UNC 4 sectors at LBA = 0x00000605 = 1541 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- c8 00 04 04 06 00 e0 00 00:53:25.850 READ DMA c8 00 06 02 06 00 e0 00 00:53:20.750 READ DMA c8 00 08 00 06 00 e0 00 00:53:15.500 READ DMA c8 00 80 80 07 00 e0 00 00:53:15.450 READ DMA c8 00 80 00 07 00 e0 00 00:53:15.450 READ DMA Error 57 occurred at disk power-on lifetime: 118 hours (4 days + 22 hours) When the command that caused the error occurred, the device was doing SMART Offline or Self-test. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 40 51 06 05 06 00 e0 Error: UNC 6 sectors at LBA = 0x00000605 = 1541 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- c8 00 06 02 06 00 e0 00 00:53:20.750 READ DMA c8 00 08 00 06 00 e0 00 00:53:15.500 READ DMA c8 00 80 80 07 00 e0 00 00:53:15.450 READ DMA c8 00 80 00 07 00 e0 00 00:53:15.450 READ DMA c8 00 02 06 06 00 e0 00 00:53:07.300 READ DMA Error 56 occurred at disk power-on lifetime: 118 hours (4 days + 22 hours) When the command that caused the error occurred, the device was doing SMART Offline or Self-test. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 40 51 08 05 06 00 e0 Error: UNC 8 sectors at LBA = 0x00000605 = 1541 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- c8 00 08 00 06 00 e0 00 00:53:15.500 READ DMA c8 00 80 80 07 00 e0 00 00:53:15.450 READ DMA c8 00 80 00 07 00 e0 00 00:53:15.450 READ DMA c8 00 02 06 06 00 e0 00 00:53:07.300 READ DMA c8 00 04 04 06 00 e0 00 00:53:02.050 READ DMA Error 55 occurred at disk power-on lifetime: 118 hours (4 days + 22 hours) When the command that caused the error occurred, the device was doing SMART Offline or Self-test. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 40 51 02 07 06 00 e0 Error: UNC 2 sectors at LBA = 0x00000607 = 1543 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- c8 00 02 06 06 00 e0 00 00:53:07.300 READ DMA c8 00 04 04 06 00 e0 00 00:53:02.050 READ DMA c8 00 06 02 06 00 e0 00 00:52:56.800 READ DMA c8 00 08 00 06 00 e0 00 00:52:51.550 READ DMA c8 00 80 80 06 00 e0 00 00:52:51.550 READ DMA SMART Self-test log structure revision number 1 Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error # 1 Conveyance offline Completed without error 00% 119 - Device does not support Selective Self Tests/Logging