Uncompressing Linux.................................................................. done, booting the kernel.
Linux version  (gs@gs) (gcc version 3.4.4) #1 Thu Feb 23 15:47:34 EST 2006
CPU: XScale-IXP42x Family [690541f1] revision 1 (ARMv5TE)
Machine: D-Link DSM-G600
Memory policy: ECC disabled, Data cache writeback
CPU0: D VIVT undefined 5 cache
CPU0: I cache: 32768 bytes, associativity 32, 32 byte lines, 32 sets
CPU0: D cache: 32768 bytes, associativity 32, 32 byte lines, 32 sets
Built 1 zonelists
Kernel command line: console=ttyS0,115200n8 root=/dev/sda1 rootfstype=ext2 rootdelay=12 noirqdebug
PID hash table entries: 512 (order: 9, 8192 bytes)
IXP4xx: FREQ=66666600 COUNT=666665
Dentry cache hash table entries: 16384 (order: 4, 65536 bytes)
Inode-cache hash table entries: 8192 (order: 3, 32768 bytes)
Memory: 64MB = 64MB total
Memory: 62744KB available (1797K code, 174K data, 92K init)
Mount-cache hash table entries: 512
CPU: Testing write buffer coherency: ok
NET: Registered protocol family 16
IXP4xx: Using 16MiB expansion bus window size
PCI: IXP4xx is host
PCI: IXP4xx Using indirect access for memory space
PCI: bus0: Fast back to back transfers disabled
dmabounce: registered device 0000:00:01.0 on pci bus
dmabounce: registered device 0000:00:03.0 on pci bus
IXP4xx: FREQ=66000000 COUNT=660001
dmabounce: registered device 0000:00:03.1 on pci bus
dmabounce: registered device 0000:00:03.2 on pci bus
dmabounce: registered device 0000:00:04.0 on pci bus
SCSI subsystem initialized
usbcore: registered new driver usbfs
usbcore: registered new driver hub
NetWinder Floating Point Emulator V0.97 (double precision)
JFFS2 version 2.2. (NAND) (C) 2001-2003 Red Hat, Inc.
Initializing Cryptographic API
io scheduler noop registered
io scheduler deadline registered (default)
IXP4xx Watchdog Timer: heartbeat 60 sec
Serial: 8250/16550 driver $Revision: 1.90 $ 1 ports, IRQ sharing disabled
serial8250.0: ttyS0 at MMIO 0xc8000000 (irq = 15) is a XScale
serial8250 serial8250.0: unable to register port at index 1 (IO0 MEMc8001000 IRQ13): -28
RAMDISK driver initialized: 4 RAM disks of 10240K size 1024 blocksize
PCI: enabling device 0000:00:01.0 (0140 -> 0141)
ata1: PATA max UDMA/100 cmd 0x1450 ctl 0x1462 bmdma 0x1440 irq 24
ata2: PATA max UDMA/100 cmd 0x1458 ctl 0x1466 bmdma 0x1448 irq 24
ATA: abnormal status 0x7F on port 0x1457
ata1: disabling port
scsi0 : pata_artop
ATA: abnormal status 0x7F on port 0x145F
ata2: disabling port
scsi1 : pata_artop
IXP4XX-Flash.0: Found 1 x16 devices at 0x0 in 16-bit bank
 Intel/Sharp Extended Query Table at 0x0031
Using buffer write method
cfi_cmdset_0001: Erase suspend on write enabled
Searching for RedBoot partition table in IXP4XX-Flash.0 at offset 0xfe0000
RedBoot directory 0x50fe0000(0x20000) native
7 RedBoot partitions found on MTD device IXP4XX-Flash.0
Creating 7 MTD partitions on "IXP4XX-Flash.0":
0x00000000-0x00040000 : "RedBoot"
0x00040000-0x00240000 : "kernel"
0x00240000-0x00840000 : "filesystem"
0x00840000-0x00ec0000 : "usr"
0x00f00000-0x00fc0000 : "sysconfig"
0x00fc0000-0x00fc1000 : "RedBoot config"
mtd: partition "RedBoot config" doesn't end on an erase block -- force read-only
0x00fe0000-0x01000000 : "FIS directory"
No valid DiskOnChip devices found
PCI: enabling device 0000:00:03.2 (0140 -> 0142)
PCI: Via IRQ fixup for 0000:00:03.2, from 25 to 9
ehci_hcd 0000:00:03.2: EHCI Host Controller
ehci_hcd 0000:00:03.2: new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:03.2: irq 25, io mem 0x48010000
ehci_hcd 0000:00:03.2: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 4 ports detected
Initializing USB Mass Storage driver...
usbcore: registered new driver usb-storage
USB Mass Storage support registered.
usbcore: registered new driver libusual
i2c /dev entries driver
hub 1-0:1.0: over-current change on port 2
NET: Registered protocol family 2
hub 1-0:1.0: over-current change on port 3
IP route cache hash table entries: 1024 (order: 0, 4096 bytes)
TCP established hash table entries: 4096 (order: 2, 16384 bytes)
TCP bind hash table entries: 4096 (order: 2, 16384 bytes)
TCP: Hash tables configured (established 4096 bind 4096)
TCP reno registered
TCP bic registered
NET: Registered protocol family 1
drivers/rtc/hctosys.c: unable to open rtc device (rtc0)
Waiting 12sec before mounting root device...
usb 1-4: new high speed USB device using ehci_hcd and address 2
usb 1-4: configuration #1 chosen from 1 choice
scsi2 : SCSI emulation for USB Mass Storage devices
  Vendor: Generic   Model: STORAGE DEVICE    Rev: 9312
  Type:   Direct-Access                      ANSI SCSI revision: 00
SCSI device sda: 1000944 512-byte hdwr sectors (512 MB)
sda: Write Protect is off
sda: assuming drive cache: write through
SCSI device sda: 1000944 512-byte hdwr sectors (512 MB)
sda: Write Protect is off
sda: assuming drive cache: write through
 sda: sda1 sda2
sd 2:0:0:0: Attached scsi removable disk sda
VFS: Cannot open root device "sda1" or unknown-block(8,1)
Please append a correct "root=" boot option
Kernel panic - not syncing: VFS: Unable to mount root fs on unknown-block(8,1)