jordo23@ROOSEVELT:~$ dmesg
[17179569.184000] Linux version 2.6.17-11-386 (root@terranova) (gcc version 4.1.2 20060928 (prerelease) (Ubuntu 4.1.1-13ubuntu5)) #2 Tue Mar 13 23:30:30 UTC 2007 (Ubuntu 2.6.17-11.37-386)
[17179569.184000] BIOS-provided physical RAM map:
[17179569.184000]  BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
[17179569.184000]  BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
[17179569.184000]  BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
[17179569.184000]  BIOS-e820: 0000000000100000 - 000000007fff0000 (usable)
[17179569.184000]  BIOS-e820: 000000007fff0000 - 000000007fff3000 (ACPI NVS)
[17179569.184000]  BIOS-e820: 000000007fff3000 - 0000000080000000 (ACPI data)
[17179569.184000]  BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
[17179569.184000]  BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
[17179569.184000]  BIOS-e820: 00000000fee00000 - 00000000fef00000 (reserved)
[17179569.184000]  BIOS-e820: 00000000fefffc00 - 00000000ff000000 (reserved)
[17179569.184000]  BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved)
[17179569.184000] 1151MB HIGHMEM available.
[17179569.184000] 896MB LOWMEM available.
[17179569.184000] found SMP MP-table at 000f59b0
[17179569.184000] On node 0 totalpages: 524272
[17179569.184000]   DMA zone: 4096 pages, LIFO batch:0
[17179569.184000]   Normal zone: 225280 pages, LIFO batch:31
[17179569.184000]   HighMem zone: 294896 pages, LIFO batch:31
[17179569.184000] DMI 2.3 present.
[17179569.184000] ACPI: RSDP (v000 Nvidia                                ) @ 0x000f7cc0
[17179569.184000] ACPI: RSDT (v001 Nvidia AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x7fff3040
[17179569.184000] ACPI: FADT (v001 Nvidia AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x7fff30c0
[17179569.184000] ACPI: MCFG (v001 Nvidia AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x7fff9900
[17179569.184000] ACPI: MADT (v001 Nvidia AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x7fff9840
[17179569.184000] ACPI: DSDT (v001 NVIDIA AWRDACPI 0x00001000 MSFT 0x0100000e) @ 0x00000000
[17179569.184000] ACPI: PM-Timer IO Port: 0x4008
[17179569.184000] ACPI: Local APIC address 0xfee00000
[17179569.184000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[17179569.184000] Processor #0 15:15 APIC version 16
[17179569.184000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[17179569.184000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[17179569.184000] IOAPIC[0]: apic_id 2, version 17, address 0xfec00000, GSI 0-23
[17179569.184000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[17179569.184000] ACPI: BIOS IRQ0 pin2 override ignored.
[17179569.184000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[17179569.184000] ACPI: INT_SRC_OVR (bus 0 bus_irq 14 global_irq 14 high edge)
[17179569.184000] ACPI: INT_SRC_OVR (bus 0 bus_irq 15 global_irq 15 high edge)
[17179569.184000] ACPI: IRQ9 used by override.
[17179569.184000] ACPI: IRQ14 used by override.
[17179569.184000] ACPI: IRQ15 used by override.
[17179569.184000] Enabling APIC mode:  Flat.  Using 1 I/O APICs
[17179569.184000] Using ACPI (MADT) for SMP configuration information
[17179569.184000] Allocating PCI resources starting at 88000000 (gap: 80000000:60000000)
[17179569.184000] Built 1 zonelists
[17179569.184000] Kernel command line: root=UUID=82ebc353-1e6c-4ec2-968b-30127071f966 ro quiet splash
[17179569.184000] mapped APIC to ffffd000 (fee00000)
[17179569.184000] mapped IOAPIC to ffffc000 (fec00000)
[17179569.184000] Enabling fast FPU save and restore... done.
[17179569.184000] Enabling unmasked SIMD FPU exception support... done.
[17179569.184000] Initializing CPU#0
[17179569.184000] PID hash table entries: 4096 (order: 12, 16384 bytes)
[17179569.184000] Detected 2412.538 MHz processor.
[17179569.184000] Using pmtmr for high-res timesource
[17179569.184000] Console: colour VGA+ 80x25
[17179570.216000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[17179570.216000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[17179570.252000] Memory: 2068360k/2097088k available (1829k kernel code, 27424k reserved, 1041k data, 288k init, 1179584k highmem)
[17179570.252000] Checking if this processor honours the WP bit even in supervisor mode... Ok.
[17179570.332000] Calibrating delay using timer specific routine.. 4829.81 BogoMIPS (lpj=9659634)
[17179570.332000] Security Framework v1.0.0 initialized
[17179570.332000] SELinux:  Disabled at boot.
[17179570.332000] Mount-cache hash table entries: 512
[17179570.332000] CPU: After generic identify, caps: 078bfbff e1d3fbff 00000000 00000000 00000000 00000000 00000000
[17179570.332000] CPU: After vendor identify, caps: 078bfbff e1d3fbff 00000000 00000000 00000000 00000000 00000000
[17179570.332000] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
[17179570.332000] CPU: L2 Cache: 512K (64 bytes/line)
[17179570.332000] CPU: After all inits, caps: 078bfbff e1d3fbff 00000000 00000410 00000000 00000000 00000000
[17179570.332000] CPU: AMD Athlon(tm) 64 Processor 3800+ stepping 00
[17179570.332000] Checking 'hlt' instruction... OK.
[17179570.348000] SMP alternatives: switching to UP code
[17179570.348000] Freeing SMP alternatives: 0k freed
[17179570.348000] checking if image is initramfs... it is
[17179570.792000] Freeing initrd memory: 6653k freed
[17179570.792000] ACPI: Core revision 20060707
[17179570.796000] ACPI: Looking for DSDT ... not found!
[17179570.796000] ENABLING IO-APIC IRQs
[17179570.796000] ..TIMER: vector=0x31 apic1=0 pin1=0 apic2=-1 pin2=-1
[17179570.940000] NET: Registered protocol family 16
[17179570.940000] EISA bus registered
[17179570.940000] ACPI: bus type pci registered
[17179570.940000] PCI: Using MMCONFIG
[17179570.940000] PCI: No mmconfig possible on 0:18
[17179570.940000] Setting up standard PCI resources
[17179570.948000] ACPI: Interpreter enabled
[17179570.948000] ACPI: Using IOAPIC for interrupt routing
[17179570.948000] ACPI: PCI Root Bridge [PCI0] (0000:00)
[17179570.948000] PCI: Probing PCI hardware (bus 00)
[17179570.952000] PCI: Ignoring BAR0-3 of IDE controller 0000:00:06.0
[17179570.952000] PCI: Transparent bridge - 0000:00:09.0
[17179570.952000] Boot video device is 0000:01:00.0
[17179570.952000] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[17179571.012000] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB0._PRT]
[17179571.012000] ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 5 7 9 10 *11 12 14 15)
[17179571.012000] ACPI: PCI Interrupt Link [LNK2] (IRQs 3 4 5 7 9 10 *11 12 14 15)
[17179571.012000] ACPI: PCI Interrupt Link [LNK3] (IRQs 3 4 *5 7 9 10 11 12 14 15)
[17179571.012000] ACPI: PCI Interrupt Link [LNK4] (IRQs *3 4 5 7 9 10 11 12 14 15)
[17179571.012000] ACPI: PCI Interrupt Link [LNK5] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
[17179571.012000] ACPI: PCI Interrupt Link [LUBA] (IRQs 3 4 *5 7 9 10 11 12 14 15)
[17179571.012000] ACPI: PCI Interrupt Link [LUBB] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
[17179571.012000] ACPI: PCI Interrupt Link [LMAC] (IRQs *3 4 5 7 9 10 11 12 14 15)
[17179571.012000] ACPI: PCI Interrupt Link [LACI] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
[17179571.016000] ACPI: PCI Interrupt Link [LMCI] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
[17179571.016000] ACPI: PCI Interrupt Link [LSMB] (IRQs 3 4 5 7 9 10 *11 12 14 15)
[17179571.016000] ACPI: PCI Interrupt Link [LUB2] (IRQs *3 4 5 7 9 10 11 12 14 15)
[17179571.016000] ACPI: PCI Interrupt Link [LIDE] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
[17179571.016000] ACPI: PCI Interrupt Link [LSID] (IRQs 3 4 *5 7 9 10 11 12 14 15)
[17179571.016000] ACPI: PCI Interrupt Link [LFID] (IRQs 3 4 5 7 9 10 *11 12 14 15)
[17179571.016000] ACPI: PCI Interrupt Link [LPCA] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
[17179571.016000] ACPI: PCI Interrupt Link [APC1] (IRQs 16) *0, disabled.
[17179571.016000] ACPI: PCI Interrupt Link [APC2] (IRQs 17) *0, disabled.
[17179571.016000] ACPI: PCI Interrupt Link [APC3] (IRQs 18) *0, disabled.
[17179571.016000] ACPI: PCI Interrupt Link [APC4] (IRQs 19) *0, disabled.
[17179571.016000] ACPI: PCI Interrupt Link [APC5] (IRQs *16), disabled.
[17179571.016000] ACPI: PCI Interrupt Link [APCF] (IRQs 20 21 22 23) *0, disabled.
[17179571.016000] ACPI: PCI Interrupt Link [APCG] (IRQs 20 21 22 23) *0, disabled.
[17179571.016000] ACPI: PCI Interrupt Link [APCH] (IRQs 20 21 22 23) *0, disabled.
[17179571.020000] ACPI: PCI Interrupt Link [APCJ] (IRQs 20 21 22 23) *0, disabled.
[17179571.020000] ACPI: PCI Interrupt Link [APCK] (IRQs 20 21 22 23) *0, disabled.
[17179571.020000] ACPI: PCI Interrupt Link [APCS] (IRQs 20 21 22 23) *0, disabled.
[17179571.020000] ACPI: PCI Interrupt Link [APCL] (IRQs 20 21 22 23) *0, disabled.
[17179571.020000] ACPI: PCI Interrupt Link [APCZ] (IRQs 20 21 22 23) *0, disabled.
[17179571.020000] ACPI: PCI Interrupt Link [APSI] (IRQs 20 21 22 23) *0, disabled.
[17179571.020000] ACPI: PCI Interrupt Link [APSJ] (IRQs 20 21 22 23) *0, disabled.
[17179571.020000] ACPI: PCI Interrupt Link [APCP] (IRQs 20 21 22 23) *0, disabled.
[17179571.024000] Linux Plug and Play Support v0.97 (c) Adam Belay
[17179571.024000] pnp: PnP ACPI init
[17179571.028000] pnp: PnP ACPI: found 15 devices
[17179571.028000] PnPBIOS: Disabled by ACPI PNP
[17179571.028000] PCI: Using ACPI for IRQ routing
[17179571.028000] PCI: If a device doesn't work, try "pci=routeirq".  If it helps, post a report
[17179571.028000] pnp: 00:00: ioport range 0x4000-0x407f could not be reserved
[17179571.028000] pnp: 00:00: ioport range 0x4080-0x40ff has been reserved
[17179571.028000] pnp: 00:00: ioport range 0x4400-0x447f has been reserved
[17179571.028000] pnp: 00:00: ioport range 0x4480-0x44ff could not be reserved
[17179571.028000] pnp: 00:00: ioport range 0x4800-0x487f has been reserved
[17179571.028000] pnp: 00:00: ioport range 0x4880-0x48ff has been reserved
[17179571.028000] PCI: Bridge: 0000:00:09.0
[17179571.028000]   IO window: 9000-afff
[17179571.028000]   MEM window: d3000000-d4ffffff
[17179571.028000]   PREFETCH window: 88000000-880fffff
[17179571.028000] PCI: Bridge: 0000:00:0b.0
[17179571.028000]   IO window: disabled.
[17179571.028000]   MEM window: disabled.
[17179571.028000]   PREFETCH window: disabled.
[17179571.028000] PCI: Bridge: 0000:00:0c.0
[17179571.028000]   IO window: disabled.
[17179571.028000]   MEM window: disabled.
[17179571.028000]   PREFETCH window: disabled.
[17179571.028000] PCI: Bridge: 0000:00:0d.0
[17179571.028000]   IO window: disabled.
[17179571.028000]   MEM window: disabled.
[17179571.028000]   PREFETCH window: disabled.
[17179571.028000] PCI: Bridge: 0000:00:0e.0
[17179571.028000]   IO window: disabled.
[17179571.028000]   MEM window: d0000000-d2ffffff
[17179571.028000]   PREFETCH window: c0000000-cfffffff
[17179571.028000] PCI: Setting latency timer of device 0000:00:09.0 to 64
[17179571.028000] PCI: Setting latency timer of device 0000:00:0b.0 to 64
[17179571.028000] PCI: Setting latency timer of device 0000:00:0c.0 to 64
[17179571.028000] PCI: Setting latency timer of device 0000:00:0d.0 to 64
[17179571.028000] PCI: Setting latency timer of device 0000:00:0e.0 to 64
[17179571.028000] NET: Registered protocol family 2
[17179571.068000] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[17179571.068000] TCP established hash table entries: 262144 (order: 8, 1048576 bytes)
[17179571.068000] TCP bind hash table entries: 65536 (order: 6, 262144 bytes)
[17179571.068000] TCP: Hash tables configured (established 262144 bind 65536)
[17179571.068000] TCP reno registered
[17179571.068000] audit: initializing netlink socket (disabled)
[17179571.068000] audit(1176296246.068:1): initialized
[17179571.068000] highmem bounce pool size: 64 pages
[17179571.068000] VFS: Disk quotas dquot_6.5.1
[17179571.068000] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[17179571.068000] Initializing Cryptographic API
[17179571.068000] io scheduler noop registered
[17179571.068000] io scheduler anticipatory registered
[17179571.068000] io scheduler deadline registered
[17179571.068000] io scheduler cfq registered (default)
[17179571.068000] PCI: Setting latency timer of device 0000:00:0b.0 to 64
[17179571.068000] pcie_portdrv_probe->Dev[005d:10de] has invalid IRQ. Check vendor BIOS
[17179571.068000] assign_interrupt_mode Found MSI capability
[17179571.068000] Allocate Port Service[0000:00:0b.0:pcie00]
[17179571.068000] Allocate Port Service[0000:00:0b.0:pcie03]
[17179571.068000] PCI: Setting latency timer of device 0000:00:0c.0 to 64
[17179571.068000] pcie_portdrv_probe->Dev[005d:10de] has invalid IRQ. Check vendor BIOS
[17179571.068000] assign_interrupt_mode Found MSI capability
[17179571.068000] Allocate Port Service[0000:00:0c.0:pcie00]
[17179571.068000] Allocate Port Service[0000:00:0c.0:pcie03]
[17179571.068000] PCI: Setting latency timer of device 0000:00:0d.0 to 64
[17179571.068000] pcie_portdrv_probe->Dev[005d:10de] has invalid IRQ. Check vendor BIOS
[17179571.068000] assign_interrupt_mode Found MSI capability
[17179571.068000] Allocate Port Service[0000:00:0d.0:pcie00]
[17179571.068000] Allocate Port Service[0000:00:0d.0:pcie03]
[17179571.068000] PCI: Setting latency timer of device 0000:00:0e.0 to 64
[17179571.068000] pcie_portdrv_probe->Dev[005d:10de] has invalid IRQ. Check vendor BIOS
[17179571.068000] assign_interrupt_mode Found MSI capability
[17179571.068000] Allocate Port Service[0000:00:0e.0:pcie00]
[17179571.068000] Allocate Port Service[0000:00:0e.0:pcie03]
[17179571.068000] isapnp: Scanning for PnP cards...
[17179571.420000] isapnp: No Plug & Play device found
[17179571.432000] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
[17179571.432000] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[17179571.432000] 00:07: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[17179571.432000] mice: PS/2 mouse device common for all mice
[17179571.436000] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize
[17179571.436000] Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
[17179571.436000] ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
[17179571.436000] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[17179571.436000] serio: i8042 AUX port at 0x60,0x64 irq 12
[17179571.436000] serio: i8042 KBD port at 0x60,0x64 irq 1
[17179571.436000] EISA: Probing bus 0 at eisa.0
[17179571.436000] Cannot allocate resource for EISA slot 4
[17179571.436000] EISA: Detected 0 cards.
[17179571.436000] TCP bic registered
[17179571.436000] NET: Registered protocol family 1
[17179571.436000] NET: Registered protocol family 8
[17179571.436000] NET: Registered protocol family 20
[17179571.436000] Using IPI Shortcut mode
[17179571.436000] ACPI: (supports S0 S1 S3 S4 S5)
[17179571.436000] Freeing unused kernel memory: 288k freed
[17179571.464000] input: AT Translated Set 2 keyboard as /class/input/input0
[17179572.504000] Capability LSM initialized
[17179572.524000] ACPI: Fan [FAN] (on)
[17179572.528000] ACPI: Processor [CPU0] (supports 8 throttling states)
[17179572.528000] ACPI: Thermal Zone [THRM] (40 C)
[17179572.824000] SCSI subsystem initialized
[17179572.824000] libata version 1.20 loaded.
[17179572.828000] sata_nv 0000:00:07.0: version 0.8
[17179572.828000] ACPI: PCI Interrupt Link [APSI] enabled at IRQ 23
[17179572.828000] ACPI: PCI Interrupt 0000:00:07.0[A] -> Link [APSI] -> GSI 23 (level, low) -> IRQ 217
[17179572.828000] PCI: Setting latency timer of device 0000:00:07.0 to 64
[17179572.828000] ata1: SATA max UDMA/133 cmd 0x9F0 ctl 0xBF2 bmdma 0xD800 irq 217
[17179572.828000] ata2: SATA max UDMA/133 cmd 0x970 ctl 0xB72 bmdma 0xD808 irq 217
[17179573.032000] ata1: SATA link down (SStatus 0)
[17179573.032000] scsi0 : sata_nv
[17179573.236000] ata2: SATA link down (SStatus 0)
[17179573.236000] scsi1 : sata_nv
[17179573.236000] ACPI: PCI Interrupt Link [APSJ] enabled at IRQ 22
[17179573.236000] ACPI: PCI Interrupt 0000:00:08.0[A] -> Link [APSJ] -> GSI 22 (level, low) -> IRQ 225
[17179573.236000] PCI: Setting latency timer of device 0000:00:08.0 to 64
[17179573.236000] ata3: SATA max UDMA/133 cmd 0x9E0 ctl 0xBE2 bmdma 0xC400 irq 225
[17179573.236000] ata4: SATA max UDMA/133 cmd 0x960 ctl 0xB62 bmdma 0xC408 irq 225
[17179573.440000] ata3: SATA link up 1.5 Gbps (SStatus 113)
[17179573.604000] ata3: dev 0 cfg 49:2f00 82:74eb 83:7f63 84:4003 85:74e8 86:3c43 87:4003 88:407f
[17179573.604000] ata3: dev 0 ATA-6, max UDMA/133, 145226112 sectors: LBA48
[17179573.604000] nv_sata: Primary device added
[17179573.604000] nv_sata: Primary device removed
[17179573.604000] nv_sata: Secondary device added
[17179573.604000] nv_sata: Secondary device removed
[17179573.612000] ata3: dev 0 configured for UDMA/133
[17179573.612000] scsi2 : sata_nv
[17179573.816000] ata4: SATA link up 1.5 Gbps (SStatus 113)
[17179573.980000] ata4: dev 0 cfg 49:2f00 82:346b 83:7f61 84:4003 85:3468 86:3c41 87:4003 88:407f
[17179573.980000] ata4: dev 0 ATA-6, max UDMA/133, 488397168 sectors: LBA48
[17179573.980000] nv_sata: Primary device added
[17179573.980000] nv_sata: Primary device removed
[17179573.980000] nv_sata: Secondary device added
[17179573.980000] nv_sata: Secondary device removed
[17179573.988000] ata4: dev 0 configured for UDMA/133
[17179573.988000] scsi3 : sata_nv
[17179573.988000]   Vendor: ATA       Model: WDC WD740GD-00FL  Rev: 27.0
[17179573.988000]   Type:   Direct-Access                      ANSI SCSI revision: 05
[17179573.992000]   Vendor: ATA       Model: WDC WD2500JD-00H  Rev: 08.0
[17179573.992000]   Type:   Direct-Access                      ANSI SCSI revision: 05
[17179573.992000] NFORCE-CK804: IDE controller at PCI slot 0000:00:06.0
[17179573.992000] NFORCE-CK804: chipset revision 162
[17179573.992000] NFORCE-CK804: not 100% native mode: will probe irqs later
[17179573.992000] NFORCE-CK804: 0000:00:06.0 (rev a2) UDMA133 controller
[17179573.992000]     ide0: BM-DMA at 0xf000-0xf007, BIOS settings: hda:DMA, hdb:DMA
[17179573.992000]     ide1: BM-DMA at 0xf008-0xf00f, BIOS settings: hdc:DMA, hdd:DMA
[17179573.992000] Probing IDE interface ide0...
[17179574.004000] SCSI device sda: 145226112 512-byte hdwr sectors (74356 MB)
[17179574.004000] sda: Write Protect is off
[17179574.004000] sda: Mode Sense: 00 3a 00 00
[17179574.004000] SCSI device sda: drive cache: write back
[17179574.004000] SCSI device sda: 145226112 512-byte hdwr sectors (74356 MB)
[17179574.004000] sda: Write Protect is off
[17179574.004000] sda: Mode Sense: 00 3a 00 00
[17179574.004000] SCSI device sda: drive cache: write back
[17179574.004000]  sda: sda1 sda2 sda3
[17179574.024000] sd 2:0:0:0: Attached scsi disk sda
[17179574.028000] SCSI device sdb: 488397168 512-byte hdwr sectors (250059 MB)
[17179574.028000] sdb: Write Protect is off
[17179574.028000] sdb: Mode Sense: 00 3a 00 00
[17179574.032000] SCSI device sdb: drive cache: write back
[17179574.032000] SCSI device sdb: 488397168 512-byte hdwr sectors (250059 MB)
[17179574.032000] sdb: Write Protect is off
[17179574.032000] sdb: Mode Sense: 00 3a 00 00
[17179574.032000] SCSI device sdb: drive cache: write back
[17179574.032000]  sdb: sdb1
[17179574.040000] sd 3:0:0:0: Attached scsi disk sdb
[17179574.728000] hda: _NEC DVD_RW ND-3520A, ATAPI CD/DVD-ROM drive
[17179575.400000] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
[17179575.400000] Probing IDE interface ide1...
[17179575.972000] hda: ATAPI 48X DVD-ROM DVD-R CD-R/RW drive, 2048kB Cache, UDMA(33)
[17179575.972000] Uniform CD-ROM driver Revision: 3.20
[17179576.140000] sata_sil 0000:05:0a.0: version 0.9
[17179576.140000] ACPI: PCI Interrupt Link [APC4] enabled at IRQ 19
[17179576.140000] ACPI: PCI Interrupt 0000:05:0a.0[A] -> Link [APC4] -> GSI 19 (level, low) -> IRQ 233
[17179576.140000] sata_sil 0000:05:0a.0: Applying R_ERR on DMA activate FIS errata fix
[17179576.140000] ata5: SATA max UDMA/100 cmd 0xF8856080 ctl 0xF885608A bmdma 0xF8856000 irq 233
[17179576.140000] ata6: SATA max UDMA/100 cmd 0xF88560C0 ctl 0xF88560CA bmdma 0xF8856008 irq 233
[17179576.140000] ata7: SATA max UDMA/100 cmd 0xF8856280 ctl 0xF885628A bmdma 0xF8856200 irq 233
[17179576.140000] ata8: SATA max UDMA/100 cmd 0xF88562C0 ctl 0xF88562CA bmdma 0xF8856208 irq 233
[17179576.344000] ata5: SATA link down (SStatus 0)
[17179576.352000] scsi4 : sata_sil
[17179576.556000] ata6: SATA link down (SStatus 0)
[17179576.564000] scsi5 : sata_sil
[17179576.768000] ata7: SATA link down (SStatus 0)
[17179576.776000] scsi6 : sata_sil
[17179576.980000] ata8: SATA link down (SStatus 0)
[17179576.988000] scsi7 : sata_sil
[17179577.052000] Probing IDE interface ide1...
[17179577.076000] usbcore: registered new driver usbfs
[17179577.076000] usbcore: registered new driver hub
[17179577.080000] ohci_hcd: 2005 April 22 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI)
[17179577.080000] ACPI: PCI Interrupt Link [APCF] enabled at IRQ 21
[17179577.080000] ACPI: PCI Interrupt 0000:00:02.0[A] -> Link [APCF] -> GSI 21 (level, low) -> IRQ 50
[17179577.080000] PCI: Setting latency timer of device 0000:00:02.0 to 64
[17179577.080000] ohci_hcd 0000:00:02.0: OHCI Host Controller
[17179577.080000] ohci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 1
[17179577.096000] ohci_hcd 0000:00:02.0: irq 50, io mem 0xd5003000
[17179577.100000] forcedeth.c: Reverse Engineered nForce ethernet driver. Version 0.54.
[17179577.152000] usb usb1: configuration #1 chosen from 1 choice
[17179577.152000] hub 1-0:1.0: USB hub found
[17179577.152000] hub 1-0:1.0: 10 ports detected
[17179577.168000] ieee1394: Initialized config rom entry `ip1394'
[17179577.256000] ACPI: PCI Interrupt Link [APCL] enabled at IRQ 20
[17179577.256000] ACPI: PCI Interrupt 0000:00:02.1[B] -> Link [APCL] -> GSI 20 (level, low) -> IRQ 58
[17179577.256000] PCI: Setting latency timer of device 0000:00:02.1 to 64
[17179577.256000] ehci_hcd 0000:00:02.1: EHCI Host Controller
[17179577.256000] ehci_hcd 0000:00:02.1: new USB bus registered, assigned bus number 2
[17179577.256000] ehci_hcd 0000:00:02.1: debug port 1
[17179577.256000] PCI: cache line size of 64 is not supported by device 0000:00:02.1
[17179577.256000] ehci_hcd 0000:00:02.1: irq 58, io mem 0xd5004000
[17179577.256000] ehci_hcd 0000:00:02.1: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
[17179577.256000] usb usb2: configuration #1 chosen from 1 choice
[17179577.256000] hub 2-0:1.0: USB hub found
[17179577.256000] hub 2-0:1.0: 10 ports detected
[17179577.360000] ACPI: PCI Interrupt Link [APCH] enabled at IRQ 23
[17179577.360000] ACPI: PCI Interrupt 0000:00:0a.0[A] -> Link [APCH] -> GSI 23 (level, low) -> IRQ 217
[17179577.360000] PCI: Setting latency timer of device 0000:00:0a.0 to 64
[17179577.360000] forcedeth: using HIGHDMA
[17179577.880000] eth0: forcedeth.c: subsystem: 01043:8141 bound to 0000:00:0a.0
[17179577.880000] ACPI: PCI Interrupt Link [APC3] enabled at IRQ 18
[17179577.880000] ACPI: PCI Interrupt 0000:05:07.2[B] -> Link [APC3] -> GSI 18 (level, low) -> IRQ 66
[17179577.928000] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[66]  MMIO=[d400e000-d400e7ff]  Max Packet=[2048]  IR/IT contexts=[4/8]
[17179577.928000] ACPI: PCI Interrupt Link [APC1] enabled at IRQ 16
[17179577.928000] ACPI: PCI Interrupt 0000:05:0b.0[A] -> Link [APC1] -> GSI 16 (level, low) -> IRQ 74
[17179577.980000] ohci1394: fw-host1: OHCI-1394 1.1 (PCI): IRQ=[74]  MMIO=[d400c000-d400c7ff]  Max Packet=[2048]  IR/IT contexts=[4/8]
[17179578.160000] kjournald starting.  Commit interval 5 seconds
[17179578.160000] EXT3-fs: mounted filesystem with ordered data mode.
[17179578.252000] usb 1-3: new low speed USB device using ohci_hcd and address 2
[17179578.476000] usb 1-3: configuration #1 chosen from 1 choice
[17179578.784000] usb 1-6: new full speed USB device using ohci_hcd and address 3
[17179578.996000] usb 1-6: configuration #1 chosen from 1 choice
[17179579.200000] ieee1394: Host added: ID:BUS[0-00:1023]  GUID[00023c01510f88e3]
[17179579.472000] ieee1394: Host added: ID:BUS[1-00:1023]  GUID[0011d80000051810]
[17179584.968000] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[17179585.052000] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[17179585.092000] Real Time Clock Driver v1.12ac
[17179585.152000] i2c_adapter i2c-0: nForce2 SMBus adapter at 0x4c00
[17179585.152000] i2c_adapter i2c-1: nForce2 SMBus adapter at 0x4c40
[17179585.240000] input: PC Speaker as /class/input/input1
[17179585.576000] gameport: EMU10K1 is pci0000:05:07.1/gameport0, io 0x9400, speed 1217kHz
[17179585.576000] Linux agpgart interface v0.101 (c) Dave Jones
[17179585.640000] eth0: no link during initialization.
[17179585.760000] parport: PnPBIOS parport detected.
[17179585.760000] parport0: PC-style at 0x378 (0x778), irq 7, dma 3 [PCSPP,TRISTATE,COMPAT,ECP,DMA]
[17179585.788000] ACPI: PCI Interrupt Link [APC2] enabled at IRQ 17
[17179585.788000] ACPI: PCI Interrupt 0000:05:0c.0[A] -> Link [APC2] -> GSI 17 (level, low) -> IRQ 82
[17179585.788000] skge 1.5 addr 0xd4008000 irq 82 chip Yukon-Lite rev 9
[17179585.788000] skge eth1: addr 00:11:d8:5f:13:6b
[17179586.344000] input: ImExPS/2 Logitech Wheel Mouse as /class/input/input2
[17179586.664000] nvidia: module license 'NVIDIA' taints kernel.
[17179587.384000] ACPI: PCI Interrupt 0000:01:00.0[A] -> Link [APC3] -> GSI 18 (level, low) -> IRQ 66
[17179587.384000] PCI: Setting latency timer of device 0000:01:00.0 to 64
[17179587.384000] NVRM: loading NVIDIA UNIX x86 Kernel Module  1.0-9746  Fri Dec 15 09:54:45 PST 2006
[17179587.628000] ACPI: PCI Interrupt 0000:05:07.0[A] -> Link [APC2] -> GSI 17 (level, low) -> IRQ 82
[17179587.632000] Installing spdif_bug patch: Audigy 2 ZS [SB0350]
[17179587.780000] NET: Registered protocol family 17
[17179587.904000] ts: Compaq touchscreen protocol output
[17179587.960000] sd 2:0:0:0: Attached scsi generic sg0 type 0
[17179587.960000] sd 3:0:0:0: Attached scsi generic sg1 type 0
[17179587.992000] skge eth1: enabling interface
[17179588.184000] usbcore: registered new driver hiddev
[17179589.716000] skge eth1: Link is up at 100 Mbps, full duplex, flow control none
[17179591.912000] NET: Registered protocol family 10
[17179591.912000] lo: Disabled Privacy Extensions
[17179591.912000] ADDRCONF(NETDEV_UP): eth0: link is not ready
[17179591.912000] IPv6 over IPv4 tunneling driver
[17179598.212000] drivers/usb/input/hid-core.c: usb_submit_urb(ctrl) failed
[17179598.212000] drivers/usb/input/hid-core.c: timeout initializing reports
[17179598.212000] input: Logitech Logitech Extreme 3D as /class/input/input3
[17179598.212000] input: USB HID v1.10 Joystick [Logitech Logitech Extreme 3D] on usb-0000:00:02.0-3
[17179598.412000] usbcore: registered new driver snd-usb-audio
[17179598.424000] input: Logitech Logitech USB Headset as /class/input/input4
[17179598.424000] input: USB HID v1.00 Device [Logitech Logitech USB Headset] on usb-0000:00:02.0-6
[17179598.424000] usbcore: registered new driver usbhid
[17179598.424000] drivers/usb/input/hid-core.c: v2.6:USB HID core driver
[17179598.748000] lp0: using parport0 (interrupt-driven).
[17179598.764000] ieee1394: sbp2: Driver forced to serialize I/O (serialize_io=1)
[17179598.764000] ieee1394: sbp2: Try serialize_io=0 for better performance
[17179598.840000] Adding 1028152k swap on /dev/disk/by-uuid/eaab7685-6154-4f72-a4ae-e0c6e03c92c0.  Priority:-1 extents:1 across:1028152k
[17179598.900000] EXT3 FS on sda2, internal journal
[17179599.044000] md: md driver 0.90.3 MAX_MD_DEVS=256, MD_SB_DISKS=27
[17179599.044000] md: bitmap version 4.39
[17179599.172000] device-mapper: 4.6.0-ioctl (2006-02-17) initialised: dm-devel@redhat.com
[17179601.964000] eth1: no IPv6 routers present
[17179607.704000] NTFS driver 2.1.27 [Flags: R/O MODULE].
[17179607.760000] NTFS volume version 3.1.
[17179612.564000] ACPI: Power Button (FF) [PWRF]
[17179612.564000] ACPI: Power Button (CM) [PWRB]
[17179612.664000] ibm_acpi: ec object not found
[17179612.688000] pcc_acpi: loading...
[17179612.984000] powernow-k8: Found 1 AMD Athlon 64 / Opteron processors (version 1.60.2)
[17179612.984000] ACPI Exception (acpi_processor-0240): AE_NOT_FOUND, Evaluating _PSS [20060707]
[17179612.988000] powernow-k8: BIOS error - no PSB or ACPI _PSS objects
[17179613.012000] acpi_cpufreq: Unknown symbol cpu_online_map
[17179615.916000] cdrom: This disc doesn't have any tracks I recognize!
[17179618.040000] apm: BIOS version 1.2 Flags 0x07 (Driver version 1.16ac)
[17179618.040000] apm: overridden by ACPI.
[17179619.532000] Bluetooth: Core ver 2.8
[17179619.532000] NET: Registered protocol family 31
[17179619.532000] Bluetooth: HCI device and connection manager initialized
[17179619.532000] Bluetooth: HCI socket layer initialized
[17179619.540000] Bluetooth: L2CAP ver 2.8
[17179619.540000] Bluetooth: L2CAP socket layer initialized
[17179619.588000] Bluetooth: HIDP (Human Interface Emulation) ver 1.1-mh1
[17179619.604000] Bluetooth: RFCOMM socket layer initialized
[17179619.604000] Bluetooth: RFCOMM TTY layer initialized
[17179619.604000] Bluetooth: RFCOMM ver 1.7
[17179635.540000] eth1: no IPv6 routers present
[17179643.348000] NET: Registered protocol family 4
[17179643.412000] NET: Registered protocol family 3
[17179643.452000] NET: Registered protocol family 5
[17179715.460000] usb 1-2: new full speed USB device using ohci_hcd and address 4
[17179715.672000] usb 1-2: configuration #1 chosen from 1 choice
[17179715.768000] usbcore: registered new driver usbserial
[17179715.768000] drivers/usb/serial/usb-serial.c: USB Serial support registered for generic
[17179715.772000] usbcore: registered new driver usbserial_generic
[17179715.772000] drivers/usb/serial/usb-serial.c: USB Serial Driver core
[17179715.772000] drivers/usb/serial/usb-serial.c: USB Serial support registered for Handspring Visor / Palm OS
[17179715.772000] drivers/usb/serial/usb-serial.c: USB Serial support registered for Sony Clie 3.5
[17179715.772000] drivers/usb/serial/usb-serial.c: USB Serial support registered for Sony Clie 5.0
[17179715.776000] visor 1-2:1.0: Handspring Visor / Palm OS converter detected
[17179715.776000] usb 1-2: Handspring Visor / Palm OS converter now attached to ttyUSB0
[17179715.776000] usb 1-2: Handspring Visor / Palm OS converter now attached to ttyUSB1
[17179715.776000] usbcore: registered new driver visor
[17179715.776000] drivers/usb/serial/visor.c: USB HandSpring Visor / Palm OS driver
[17179719.944000] usb 1-2: USB disconnect, address 4
[17179719.944000] visor ttyUSB0: Handspring Visor / Palm OS converter now disconnected from ttyUSB0
[17179719.944000] visor ttyUSB1: Handspring Visor / Palm OS converter now disconnected from ttyUSB1
[17179719.944000] visor 1-2:1.0: device disconnected
[17179724.532000] usb 1-2: new full speed USB device using ohci_hcd and address 5
[17179724.744000] usb 1-2: configuration #1 chosen from 1 choice
[17179724.752000] visor 1-2:1.0: Handspring Visor / Palm OS converter detected
[17179724.752000] usb 1-2: Handspring Visor / Palm OS converter now attached to ttyUSB0
[17179724.752000] usb 1-2: Handspring Visor / Palm OS converter now attached to ttyUSB1
[17179729.016000] usb 1-2: USB disconnect, address 5
[17179729.016000] visor ttyUSB0: Handspring Visor / Palm OS converter now disconnected from ttyUSB0
[17179729.016000] visor ttyUSB1: Handspring Visor / Palm OS converter now disconnected from ttyUSB1
[17179729.016000] visor 1-2:1.0: device disconnected
[17179731.840000] usb 1-2: new full speed USB device using ohci_hcd and address 6
[17179732.052000] usb 1-2: configuration #1 chosen from 1 choice
[17179732.060000] visor 1-2:1.0: Handspring Visor / Palm OS converter detected
[17179732.060000] usb 1-2: Handspring Visor / Palm OS converter now attached to ttyUSB0
[17179732.060000] usb 1-2: Handspring Visor / Palm OS converter now attached to ttyUSB1
[17179734.056000] usb 1-2: USB disconnect, address 6
[17179734.056000] visor ttyUSB0: Handspring Visor / Palm OS converter now disconnected from ttyUSB0
[17179734.056000] visor ttyUSB1: Handspring Visor / Palm OS converter now disconnected from ttyUSB1
[17179734.056000] visor 1-2:1.0: device disconnected
[17179748.220000] usb 1-2: new full speed USB device using ohci_hcd and address 7
[17179748.432000] usb 1-2: configuration #1 chosen from 1 choice
[17179748.440000] visor 1-2:1.0: Handspring Visor / Palm OS converter detected
[17179748.440000] usb 1-2: Handspring Visor / Palm OS converter now attached to ttyUSB0
[17179748.440000] usb 1-2: Handspring Visor / Palm OS converter now attached to ttyUSB1
[17179758.500000] usb 1-2: USB disconnect, address 7
[17179758.500000] visor ttyUSB0: Handspring Visor / Palm OS converter now disconnected from ttyUSB0
[17179758.500000] visor ttyUSB1: Handspring Visor / Palm OS converter now disconnected from ttyUSB1
[17179758.500000] visor 1-2:1.0: device disconnected
[17179795.344000] usb 1-2: new full speed USB device using ohci_hcd and address 8
[17179795.556000] usb 1-2: configuration #1 chosen from 1 choice
[17179795.564000] visor 1-2:1.0: Handspring Visor / Palm OS converter detected
[17179795.564000] usb 1-2: Handspring Visor / Palm OS converter now attached to ttyUSB0
[17179795.564000] usb 1-2: Handspring Visor / Palm OS converter now attached to ttyUSB1
[17179830.824000] usb 1-2: USB disconnect, address 8
[17179830.824000] visor ttyUSB0: Handspring Visor / Palm OS converter now disconnected from ttyUSB0
[17179830.824000] visor ttyUSB1: Handspring Visor / Palm OS converter now disconnected from ttyUSB1
[17179830.824000] visor 1-2:1.0: device disconnected
jordo23@ROOSEVELT:~$ clear
jordo23@ROOSEVELT:~$ dmesg | tail -100
[17179591.912000] IPv6 over IPv4 tunneling driver
[17179598.212000] drivers/usb/input/hid-core.c: usb_submit_urb(ctrl) failed
[17179598.212000] drivers/usb/input/hid-core.c: timeout initializing reports
[17179598.212000] input: Logitech Logitech Extreme 3D as /class/input/input3
[17179598.212000] input: USB HID v1.10 Joystick [Logitech Logitech Extreme 3D] on usb-0000:00:02.0-3
[17179598.412000] usbcore: registered new driver snd-usb-audio
[17179598.424000] input: Logitech Logitech USB Headset as /class/input/input4
[17179598.424000] input: USB HID v1.00 Device [Logitech Logitech USB Headset] on usb-0000:00:02.0-6
[17179598.424000] usbcore: registered new driver usbhid
[17179598.424000] drivers/usb/input/hid-core.c: v2.6:USB HID core driver
[17179598.748000] lp0: using parport0 (interrupt-driven).
[17179598.764000] ieee1394: sbp2: Driver forced to serialize I/O (serialize_io=1)
[17179598.764000] ieee1394: sbp2: Try serialize_io=0 for better performance
[17179598.840000] Adding 1028152k swap on /dev/disk/by-uuid/eaab7685-6154-4f72-a4ae-e0c6e03c92c0.  Priority:-1 extents:1 across:1028152k
[17179598.900000] EXT3 FS on sda2, internal journal
[17179599.044000] md: md driver 0.90.3 MAX_MD_DEVS=256, MD_SB_DISKS=27
[17179599.044000] md: bitmap version 4.39
[17179599.172000] device-mapper: 4.6.0-ioctl (2006-02-17) initialised: dm-devel@redhat.com
[17179601.964000] eth1: no IPv6 routers present
[17179607.704000] NTFS driver 2.1.27 [Flags: R/O MODULE].
[17179607.760000] NTFS volume version 3.1.
[17179612.564000] ACPI: Power Button (FF) [PWRF]
[17179612.564000] ACPI: Power Button (CM) [PWRB]
[17179612.664000] ibm_acpi: ec object not found
[17179612.688000] pcc_acpi: loading...
[17179612.984000] powernow-k8: Found 1 AMD Athlon 64 / Opteron processors (version 1.60.2)
[17179612.984000] ACPI Exception (acpi_processor-0240): AE_NOT_FOUND, Evaluating _PSS [20060707]
[17179612.988000] powernow-k8: BIOS error - no PSB or ACPI _PSS objects
[17179613.012000] acpi_cpufreq: Unknown symbol cpu_online_map
[17179615.916000] cdrom: This disc doesn't have any tracks I recognize!
[17179618.040000] apm: BIOS version 1.2 Flags 0x07 (Driver version 1.16ac)
[17179618.040000] apm: overridden by ACPI.
[17179619.532000] Bluetooth: Core ver 2.8
[17179619.532000] NET: Registered protocol family 31
[17179619.532000] Bluetooth: HCI device and connection manager initialized
[17179619.532000] Bluetooth: HCI socket layer initialized
[17179619.540000] Bluetooth: L2CAP ver 2.8
[17179619.540000] Bluetooth: L2CAP socket layer initialized
[17179619.588000] Bluetooth: HIDP (Human Interface Emulation) ver 1.1-mh1
[17179619.604000] Bluetooth: RFCOMM socket layer initialized
[17179619.604000] Bluetooth: RFCOMM TTY layer initialized
[17179619.604000] Bluetooth: RFCOMM ver 1.7
[17179635.540000] eth1: no IPv6 routers present
[17179643.348000] NET: Registered protocol family 4
[17179643.412000] NET: Registered protocol family 3
[17179643.452000] NET: Registered protocol family 5
[17179715.460000] usb 1-2: new full speed USB device using ohci_hcd and address 4
[17179715.672000] usb 1-2: configuration #1 chosen from 1 choice
[17179715.768000] usbcore: registered new driver usbserial
[17179715.768000] drivers/usb/serial/usb-serial.c: USB Serial support registered for generic
[17179715.772000] usbcore: registered new driver usbserial_generic
[17179715.772000] drivers/usb/serial/usb-serial.c: USB Serial Driver core
[17179715.772000] drivers/usb/serial/usb-serial.c: USB Serial support registered for Handspring Visor / Palm OS
[17179715.772000] drivers/usb/serial/usb-serial.c: USB Serial support registered for Sony Clie 3.5
[17179715.772000] drivers/usb/serial/usb-serial.c: USB Serial support registered for Sony Clie 5.0
[17179715.776000] visor 1-2:1.0: Handspring Visor / Palm OS converter detected
[17179715.776000] usb 1-2: Handspring Visor / Palm OS converter now attached to ttyUSB0
[17179715.776000] usb 1-2: Handspring Visor / Palm OS converter now attached to ttyUSB1
[17179715.776000] usbcore: registered new driver visor
[17179715.776000] drivers/usb/serial/visor.c: USB HandSpring Visor / Palm OS driver
[17179719.944000] usb 1-2: USB disconnect, address 4
[17179719.944000] visor ttyUSB0: Handspring Visor / Palm OS converter now disconnected from ttyUSB0
[17179719.944000] visor ttyUSB1: Handspring Visor / Palm OS converter now disconnected from ttyUSB1
[17179719.944000] visor 1-2:1.0: device disconnected
[17179724.532000] usb 1-2: new full speed USB device using ohci_hcd and address 5
[17179724.744000] usb 1-2: configuration #1 chosen from 1 choice
[17179724.752000] visor 1-2:1.0: Handspring Visor / Palm OS converter detected
[17179724.752000] usb 1-2: Handspring Visor / Palm OS converter now attached to ttyUSB0
[17179724.752000] usb 1-2: Handspring Visor / Palm OS converter now attached to ttyUSB1
[17179729.016000] usb 1-2: USB disconnect, address 5
[17179729.016000] visor ttyUSB0: Handspring Visor / Palm OS converter now disconnected from ttyUSB0
[17179729.016000] visor ttyUSB1: Handspring Visor / Palm OS converter now disconnected from ttyUSB1
[17179729.016000] visor 1-2:1.0: device disconnected
[17179731.840000] usb 1-2: new full speed USB device using ohci_hcd and address 6
[17179732.052000] usb 1-2: configuration #1 chosen from 1 choice
[17179732.060000] visor 1-2:1.0: Handspring Visor / Palm OS converter detected
[17179732.060000] usb 1-2: Handspring Visor / Palm OS converter now attached to ttyUSB0
[17179732.060000] usb 1-2: Handspring Visor / Palm OS converter now attached to ttyUSB1
[17179734.056000] usb 1-2: USB disconnect, address 6
[17179734.056000] visor ttyUSB0: Handspring Visor / Palm OS converter now disconnected from ttyUSB0
[17179734.056000] visor ttyUSB1: Handspring Visor / Palm OS converter now disconnected from ttyUSB1
[17179734.056000] visor 1-2:1.0: device disconnected
[17179748.220000] usb 1-2: new full speed USB device using ohci_hcd and address 7
[17179748.432000] usb 1-2: configuration #1 chosen from 1 choice
[17179748.440000] visor 1-2:1.0: Handspring Visor / Palm OS converter detected
[17179748.440000] usb 1-2: Handspring Visor / Palm OS converter now attached to ttyUSB0
[17179748.440000] usb 1-2: Handspring Visor / Palm OS converter now attached to ttyUSB1
[17179758.500000] usb 1-2: USB disconnect, address 7
[17179758.500000] visor ttyUSB0: Handspring Visor / Palm OS converter now disconnected from ttyUSB0
[17179758.500000] visor ttyUSB1: Handspring Visor / Palm OS converter now disconnected from ttyUSB1
[17179758.500000] visor 1-2:1.0: device disconnected
[17179795.344000] usb 1-2: new full speed USB device using ohci_hcd and address 8
[17179795.556000] usb 1-2: configuration #1 chosen from 1 choice
[17179795.564000] visor 1-2:1.0: Handspring Visor / Palm OS converter detected
[17179795.564000] usb 1-2: Handspring Visor / Palm OS converter now attached to ttyUSB0
[17179795.564000] usb 1-2: Handspring Visor / Palm OS converter now attached to ttyUSB1
[17179830.824000] usb 1-2: USB disconnect, address 8
[17179830.824000] visor ttyUSB0: Handspring Visor / Palm OS converter now disconnected from ttyUSB0
[17179830.824000] visor ttyUSB1: Handspring Visor / Palm OS converter now disconnected from ttyUSB1
[17179830.824000] visor 1-2:1.0: device disconnected
jordo23@ROOSEVELT:~$