#
# # specify the default transmit tone (when not receiving)
# tx=1000
# # Specify the receive freq, the tag (use 0 if none), and the transmit code.
# # The tag may be used by applications to determine classification of tones.
# # The tones are to be specified in order of presedence, most important first.
# # Currently, 15 tones may be specified..
# ctcss=1318,1,1318
# ctcss=1862,1,1862
#
# The following parameters may be omitted if their default value is acceptible
#
# # set the receive debounce time in milliseconds
# debouncetime=123
# # set the transmit quiet dropoff burst time in milliseconds
# bursttime=234
# # set the COR level threshold (specified in tenths of millivolts)
# # valid values are {3125,6250,9375,12500,15625,18750,21875,25000}
# corthresh=12500
# # Invert COR signal {y,n}
# invertcor=y
# # set the external tone mode; yes, no, internal {y,n,i}
# exttone=y
#
# Now apply the configuration to the specified channels:
#
# # We are all done with our channel parameters, so now we specify what
# # channels they apply to
channels=1-4