ponte2 started
--------------
wait for bringing up wireless system...
setting up client link...
discover DHCP server...
info, udhcpc (v0.9.9-pre) started
debug, Sending discover...
debug, Sending discover...
debug, Sending select for 192.168.182.2...
info, Lease of 192.168.182.2 obtained, lease time 600
deleting routers
adding router 192.168.182.1
adding dns 192.168.0.10
adding dns 192.168.0.10
ath1      Scanning...
SSID            BSSID              CHAN RATE  S:N   INT CAPS
MyFON_ANDY      00:18:84:23:34:82    1   54M 22:0   100 EPSs WME ATH
FON_ANDY        00:18:84:23:34:81    1   54M 22:0   100 ESs  WME ATH
NG-ANDY         00:18:4d:69:0a:02   11   54M 73:0   100 EPSs WME
setting up access point...
setting up ath0 and eth0 IP interfaces...
starting dnsmasq...
yes
setting up TCP/IP and netfilter...
check remote gateway (192.168.182.1) connection, wait.... wait... sorry, no connection!

client link:
------------
ath1 IEEE 802.11g ESSID:"FON_ANDY"
Mode:Managed Frequency:2.412 GHz Access Point: 00:18:84:23:34:81
Link Quality=27/113 Signal level=-86 dBm Noise level=-113 dBm


repeater Acces Point
--------------------
ath0 IEEE 802.11g ESSID:"relay_FON_ANDY"
Mode:Master Frequency:2.412 GHz Access Point: 00:18:84:18:97:95
Link Quality=27/113 Signal level=-86 dBm Noise level=-113 dBm