# This file was generated by Xorgautoconfig v0.2.2.
Section "ServerLayout"
	Identifier	"X.Org Configured"
	Screen		0  "Internal Screen" 0 0
        Screen          1  "Screen1" Rightof "Screen0"
	InputDevice	"Mouse0" "CorePointer"
	InputDevice	"Keyboard0" "CoreKeyboard"
        Option          "AIGLX" "true"
EndSection

Section "Files"
# Multiple FontPath entries are allowed (which are concatenated together),
# as well as specifying multiple comma-separated entries in one FontPath
# command (or a combination of both methods)

# For X Font Server support, uncomment this and comment the other FontPaths
# Note that this is not required for most configurations
#       FontPath	"unix/:-1"
	FontPath	"/usr/share/fonts/ttf-bitstream-vera/"
	FontPath	"/usr/share/fonts/util/"
	FontPath	"/usr/share/fonts/encodings/"
	FontPath	"/usr/share/fonts/100dpi/"
	FontPath	"/usr/share/fonts/100dpi/:unscaled"
	FontPath	"/usr/share/fonts/75dpi/"
	FontPath	"/usr/share/fonts/75dpi/:unscaled"
	FontPath	"/usr/share/fonts/cyrillic/"
	FontPath	"/usr/share/fonts/misc/"
	FontPath	"/usr/share/fonts/Type1/"
EndSection

Section "Module"
	Load	"extmod"
	Load	"dri"
	Load	"dbe"
	Load	"record"
	Load	"glx"
	Load	"type1"
	Load	"freetype"
EndSection

Section "Extensions"
 	Option "Composite"	"Enable"	# Experimental
EndSection

Section "ServerFlags"
 	Option 	"blank time"	"10"	# 10 minutes
 	Option 	"standby time"	"20"
 	Option 	"suspend time"	"30"
 	Option 	"off time"	"60"
### Uncomment this Server flag if X should not change resolutions.
### This is useful if mode changing crashes / corrupts the X server
#	Option  "DisableVidModeExtensions"
EndSection

Section "InputDevice"
	Identifier	"Keyboard0"
	Driver		"kbd"
# Change "XkbModel" to "macintosh_old" if you are using
# the deprecated adb keycodes.
	Option		"XkbModel"	"pc105"
	Option		"XkbLayout"	"us"
 	Option 		"XkbOptions" 	"compose:rwin"
### Uncomment this if your layout uses nodeadkeys
	#Option		"XkbVariant"	"nodeadkeys"
EndSection

Section "InputDevice"
	Identifier	"Mouse0"
	Driver   	"mouse"
	Option		"CorePointer"
	Option   	"Protocol" 	 "auto"
	Option		"Device"	 "/dev/input/mice"
EndSection

Section "Monitor"
	Identifier	"Monitor0"
	UseModes	"Modes0"
	ModelName	"Apple Powerbook Display"
	Option		"DPMS"
	HorizSync	30-130
	VertRefresh	50-160
EndSection

Section "Monitor"
        Identifier      "VX2025wm"
        UseModes        "VX2025wmModes"
        ModelName       "ViewSonic 20.1 inch widescreen"
        Option          "DPMS"
        HorizSync       30-100
        VertRefresh     50-75
EndSection

Section "Modes"
	Identifier	"Modes0"

	# Generated
	# D: 96.219 MHz, H: 54.670 kHz, V: 59.945 Hz
	Modeline "1440x900" 96.219 1440 1504 1536 1760  900 903 906 912  -HSync -VSync
EndSection

Section "Modes"
        Identifier "VX2025wmModes"
        # V-freq: 60.00 Hz // H-freq: 65.35 KHz
        Modeline "1680x1050" 149.00 1680 1760 1944 2280 1050 1050 1052 1089
EndSection

Section "Device"
	Identifier	"Card0"
	Option	"XAANoOffscreenPixmaps"	"true"
	Option	"DRI"	"true"
	### Available Driver options:
	Option "EnablePageFlip" "true" # Increases performance
	#Option "SWcursor"	"false" # Use Software Cursor
        Option  "HWCursor"  "false"
	#Option "NoAccel"	"false" # Disable Hardware Acceleration
	Option "AGPMode"	"8"	# Set AGP data transfer rate, DRI only
	Option "AGPFastWrite" "false" # Use AGP Fast Write, DRI only
	Option "RenderAccel" "true"  # Hardware acceleration
	#Option "DCCMode"	"false" # Use querried modes from monitor
	#Option "MonitorLayout" "TMDS" # Enable this for Apple DVI LCDs
        #Option "CRT2Position" "Leftof"
	### See "man radeon" for additional options
	Driver	"radeon"
	BusID	"PCI:0:16:0"
EndSection

Section "Device"
	Identifier	"Card1"
        Screen 1

	Option	"XAANoOffscreenPixmaps"	"true"
	Option	"DRI"	"true"
	### Available Driver options:
	Option "EnablePageFlip" "true" # Increases performance
	#Option "SWcursor"	"false" # Use Software Cursor
	#Option "NoAccel"	"false" # Disable Hardware Acceleration
	Option "AGPMode"	"8"	# Set AGP data transfer rate, DRI only
	Option "AGPFastWrite" "false" # Use AGP Fast Write, DRI only
	Option "RenderAccel" "true"  # Hardware acceleration
	#Option "DCCMode"	"false" # Use querried modes from monitor
	#Option "MonitorLayout" "TMDS" # Enable this for Apple DVI LCDs
	### See "man radeon" for additional options
	Driver	"radeon"
	BusID	"PCI:0:16:0"
EndSection



Section "Screen"
	Identifier	"Internal Screen"
	Device		"Card0"
	Monitor		"Monitor0"
	DefaultDepth	24
	SubSection "Display"
		Depth		8
		Modes 		"1440x900"
	EndSubSection
	SubSection "Display"
		Depth		16
		Modes 		"1440x900"
	EndSubSection
	SubSection "Display"
		Depth		24
		Modes 		"1440x900"
	EndSubSection
EndSection

Section "Screen"
        Identifier "Screen1"
        Device "Card1"
        Monitor "VX2025wm"
        DefaultDepth 24
        Subsection "Display"
                Virtual 1680 1050
                Depth 24
                Modes "1680x1050@60"
        EndSubsection
EndSection

Section "DRI"
	Group 0
	Mode 0666
EndSection