Level: 16 # date Fri Apr 20 20:16:47 EEST 2007 # test -f $(which lsb_release) && lsb_release -a || cat /etc/*release* LSB Version: core-2.0-noarch:core-3.0-noarch:core-2.0-x86_64:core-3.0-x86_64:desktop-3.1-amd64:desktop-3.1-noarch:graphics-2.0-amd64:graphics-2.0-noarch:graphics-3.1-amd64:graphics-3.1-noarch Distributor ID: SUSE LINUX Description: openSUSE 10.2 (X86-64) Release: 10.2 Codename: n/a # who -r run-level 5 Apr 20 20:12 last=S # uname -a Linux hoasb-ff0cdd00-82 2.6.18.8-0.1-default #1 SMP Fri Mar 2 13:51:59 UTC 2007 x86_64 x86_64 x86_64 GNU/Linux # cat /proc/cpuinfo processor : 0 vendor_id : AuthenticAMD cpu family : 15 model : 95 model name : AMD Athlon(tm) 64 Processor 3000+ stepping : 2 cpu MHz : 1000.000 cache size : 512 KB fpu : yes fpu_exception : yes cpuid level : 1 wp : yes flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush mmx fxsr sse sse2 syscall nx mmxext fxsr_opt rdtscp lm 3dnowext 3dnow up pni cx16 lahf_lm svm cr8_legacy bogomips : 2001.29 TLB size : 1024 4K pages clflush size : 64 cache_alignment : 64 address sizes : 40 bits physical, 48 bits virtual power management: ts fid vid ttp tm stc # free -m total used free shared buffers cached Mem: 499 117 381 0 5 73 -/+ buffers/cache: 38 460 Swap: 2055 0 2055 # zypper sl || rug sl # | Enabled | Refresh | Type | Name | URI --+---------+---------+------+-----------------+------------------------------------------------------------------------------ 1 | Yes | Yes | YUM | 20070420-200110 | http://www2.ati.com/suse/10.2/ 2 | Yes | Yes | YUM | voikko | http://opensuse.fi/voikko/10.2 3 | Yes | Yes | YUM | 20070420-190247 | http://ftp.skynet.be/pub/software.opensuse.org/xorg72/openSUSE_10.2/ 4 | Yes | Yes | YUM | update | http://ftp.gwdg.de/pub/suse/update/10.2/ 5 | Yes | Yes | YUM | packman | http://ftp.skynet.be/pub/packman/suse/10.2/ 6 | Yes | Yes | YUM | 20070420-190823 | http://software.opensuse.org/download/xorg72/openSUSE_10.2/ 7 | Yes | Yes | YaST | guru | http://ftp.skynet.be/pub/suser-guru/rpm/10.2/ 8 | Yes | No | YaST | main-non-oss | ftp://ftp.funet.fi/pub/linux/mirrors/opensuse/distribution/10.2/repo/non-oss/ 9 | Yes | No | YaST | main-oss | ftp://ftp.funet.fi/pub/linux/mirrors/opensuse/distribution/10.2/repo/oss/ # rpm -q zmd; pgrep zmd.exe && echo zmd is running || echo zmd is not running zmd-7.1.100.0-46 zmd is not running # mount /dev/sda2 on / type ext3 (rw,acl,user_xattr) proc on /proc type proc (rw) sysfs on /sys type sysfs (rw) debugfs on /sys/kernel/debug type debugfs (rw) udev on /dev type tmpfs (rw) devpts on /dev/pts type devpts (rw,mode=0620,gid=5) /dev/sda3 on /home type ext3 (rw,acl,user_xattr) securityfs on /sys/kernel/security type securityfs (rw) # cat /etc/fstab /dev/sda2 / ext3 acl,user_xattr 1 1 /dev/sda3 /home ext3 acl,user_xattr 1 2 /dev/sda1 swap swap defaults 0 0 proc /proc proc defaults 0 0 sysfs /sys sysfs noauto 0 0 debugfs /sys/kernel/debug debugfs noauto 0 0 usbfs /proc/bus/usb usbfs noauto 0 0 devpts /dev/pts devpts mode=0620,gid=5 0 0 # cat /etc/X11/xorg.conf|sed 's/.*/L&/;/section "device"/,/endsection/ bend;d;:end;s/^[t ] +//'|grep driver driver "vesa" # lsusb Bus 004 Device 003: ID 099a:610c Zippy Technology Corp. EL-610 Super Mini Electron luminescent Keyboard Bus 004 Device 002: ID 1267:0201 Logic3 / SpectraVideo plc A4Tech SWOP-3 Mouse Bus 004 Device 001: ID 0000:0000 Bus 005 Device 002: ID 0bda:0111 Realtek Semiconductor Corp. Bus 005 Device 001: ID 0000:0000 Bus 002 Device 001: ID 0000:0000 Bus 003 Device 001: ID 0000:0000 Bus 001 Device 001: ID 0000:0000 # lspci 00:00.0 Host bridge: VIA Technologies, Inc. K8M890CE Host Bridge 00:00.1 Host bridge: VIA Technologies, Inc. K8M890CE Host Bridge 00:00.2 Host bridge: VIA Technologies, Inc. K8M890CE Host Bridge 00:00.3 Host bridge: VIA Technologies, Inc. K8M890CE Host Bridge 00:00.4 Host bridge: VIA Technologies, Inc. K8M890CE Host Bridge 00:00.5 PIC: VIA Technologies, Inc. K8M890CE I/O APIC Interrupt Controller 00:00.6 Host bridge: VIA Technologies, Inc. Unknown device 6290 00:00.7 Host bridge: VIA Technologies, Inc. K8M890CE Host Bridge 00:01.0 PCI bridge: VIA Technologies, Inc. VT8237 PCI bridge [K8T800/K8T890 South] 00:02.0 PCI bridge: VIA Technologies, Inc. K8T890 PCI to PCI Bridge Controller 00:03.0 PCI bridge: VIA Technologies, Inc. K8T890 PCI to PCI Bridge Controller 00:0f.0 IDE interface: VIA Technologies, Inc. VT8237A SATA 2-Port Controller (rev 80) 00:0f.1 IDE interface: VIA Technologies, Inc. VT82C586A/B/VT82C686/A/B/VT823x/A/C PIPC Bus Master IDE (rev 07) 00:10.0 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev a0) 00:10.1 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev a0) 00:10.2 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev a0) 00:10.3 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev a0) 00:10.4 USB Controller: VIA Technologies, Inc. USB 2.0 (rev 86) 00:11.0 ISA bridge: VIA Technologies, Inc. VT8237A PCI to ISA Bridge 00:11.7 Host bridge: VIA Technologies, Inc. VT8251 Ultra VLINK Controller 00:13.0 PCI bridge: VIA Technologies, Inc. VT8237A Host Bridge 00:13.1 PCI bridge: VIA Technologies, Inc. VT8237A PCI to PCI Bridge 00:18.0 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] HyperTransport Technology Configuration 00:18.1 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Address Map 00:18.2 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] DRAM Controller 00:18.3 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Miscellaneous Control 02:00.0 VGA compatible controller: ATI Technologies Inc RV370 [Sapphire X550 Silent] 02:00.1 Display controller: ATI Technologies Inc RV370 secondary [Sapphire X550 Silent] 04:01.0 Audio device: VIA Technologies, Inc. VIA High Definition Audio Controller (rev 10) 05:09.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8169 Gigabit Ethernet (rev 10) # hwinfo --short cpu: AMD Athlon(tm) 64 Processor 3000+, 1000 MHz keyboard: /dev/input/event2 USB Multimedia Keyboard mouse: /dev/input/mice USB Mouse graphics card: ATI RADEON X550 (RV370 XT 5B63) RV370 secondary [ATI Sapphire X550 Silent] sound: ASUSTeK VIA High Definition Audio Controller storage: ASUSTeK VT8237A SATA 2-Port Controller ASUSTeK A7V600/K8V-X/A8V Deluxe motherboard network: eth0 ASUSTeK RTL-8169 Gigabit Ethernet network interface: lo Loopback network interface eth0 Ethernet network interface sit0 Network Interface disk: /dev/sda WDC WD1600AAJS-0 /dev/sdb Generic Compact Flash /dev/sdc Generic SM/xD-Picture /dev/sdd Generic SD/MMC /dev/sde Generic MS/MS-Pro partition: /dev/sda1 Partition /dev/sda2 Partition /dev/sda3 Partition cdrom: /dev/hda TSSTcorpCD/DVDW SH-S182D usb controller: ASUSTeK A7V600/K8V-X/A8V Deluxe motherboard ASUSTeK A7V600/K8V-X/A8V Deluxe motherboard ASUSTeK A7V600/K8V-X/A8V Deluxe motherboard ASUSTeK A7V600/K8V-X/A8V Deluxe motherboard ASUSTeK A7V600/K8V-X/A8V Deluxe motherboard bios: BIOS bridge: VIA Host bridge ASUSTeK Host bridge ASUSTeK Host bridge ASUSTeK Host bridge ASUSTeK Host bridge VIA Host bridge VIA Host bridge VIA VT8237 PCI bridge [K8T800/K8T890 South] VIA K8T890 PCI to PCI Bridge Controller VIA K8T890 PCI to PCI Bridge Controller ASUSTeK VT8237A PCI to ISA Bridge VIA VT8251 Ultra VLINK Controller VIA VT8237A PCI to PCIE Bridge VIA VT8237A PCI to PCI Bridge AMD K8 [Athlon64/Opteron] HyperTransport Technology Configuration AMD K8 [Athlon64/Opteron] Address Map AMD K8 [Athlon64/Opteron] DRAM Controller AMD K8 [Athlon64/Opteron] Miscellaneous Control hub: Linux 2.6.18.8-0.1-default uhci_hcd UHCI Host Controller Linux 2.6.18.8-0.1-default uhci_hcd UHCI Host Controller Linux 2.6.18.8-0.1-default uhci_hcd UHCI Host Controller Linux 2.6.18.8-0.1-default uhci_hcd UHCI Host Controller Linux 2.6.18.8-0.1-default ehci_hcd EHCI Host Controller memory: Main Memory unknown: FPU DMA controller PIC Timer RTC Keyboard controller /dev/lp0 Parallel controller PS/2 Controller ASUSTeK PIC /dev/ttyS0 16550A /dev/ttyS1 16550A /dev/input/event3 USB Multimedia Keyboard # dmesg | grep -v '^martian source |^ll header: |^SFW2-' Bootdata ok (command line is root=/dev/sda2 resume=/dev/sda1 splash=silent) Linux version 2.6.18.8-0.1-default (geeko@buildhost) (gcc version 4.1.2 20061115 (prerelease) (SUSE Linux)) #1 SMP Fri Mar 2 13:51:59 UTC 2007 BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009b000 (usable) BIOS-e820: 000000000009b000 - 00000000000a0000 (reserved) BIOS-e820: 00000000000e9c30 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 000000001ffb0000 (usable) BIOS-e820: 000000001ffb0000 - 000000001ffbe000 (ACPI data) BIOS-e820: 000000001ffbe000 - 000000001ffe0000 (ACPI NVS) BIOS-e820: 000000001ffe0000 - 0000000020000000 (reserved) BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved) BIOS-e820: 00000000fecc0000 - 00000000fecc1000 (reserved) BIOS-e820: 00000000ff780000 - 0000000100000000 (reserved) DMI 2.3 present. ACPI: RSDP (v000 ACPIAM ) @ 0x00000000000fa7c0 ACPI: RSDT (v001 A M I OEMRSDT 0x07000627 MSFT 0x00000097) @ 0x000000001ffb0000 ACPI: FADT (v002 A M I OEMFACP 0x07000627 MSFT 0x00000097) @ 0x000000001ffb0200 ACPI: MADT (v001 A M I OEMAPIC 0x07000627 MSFT 0x00000097) @ 0x000000001ffb0390 ACPI: MCFG (v001 A M I OEMMCFG 0x07000627 MSFT 0x00000097) @ 0x000000001ffb0400 ACPI: OEMB (v001 A M I AMI_OEM 0x07000627 MSFT 0x00000097) @ 0x000000001ffbe040 ACPI: DSDT (v001 A0593 A0593000 0x00000000 INTL 0x02002026) @ 0x0000000000000000 Scanning NUMA topology in Northbridge 24 Number of nodes 1 Node 0 MemBase 0000000000000000 Limit 000000001ffb0000 NUMA: Using 63 for the hash shift. Using node hash shift of 63 Bootmem setup node 0 0000000000000000-000000001ffb0000 On node 0 totalpages: 128051 DMA zone: 2889 pages, LIFO batch:0 DMA32 zone: 125162 pages, LIFO batch:31 ACPI: PM-Timer IO Port: 0x808 ACPI: Local APIC address 0xfee00000 ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) Processor #0 15:15 APIC version 16 ACPI: LAPIC (acpi_id[0x02] lapic_id[0x81] disabled) ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0]) IOAPIC[0]: apic_id 1, version 3, address 0xfec00000, GSI 0-23 ACPI: IOAPIC (id[0x02] address[0xfecc0000] gsi_base[24]) IOAPIC[1]: apic_id 2, version 3, address 0xfecc0000, GSI 24-47 ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level) ACPI: IRQ0 used by override. ACPI: IRQ2 used by override. ACPI: IRQ9 used by override. Setting APIC routing to physical flat Using ACPI (MADT) for SMP configuration information Allocating PCI resources starting at 30000000 (gap: 20000000:dec00000) SMP: Allowing 2 CPUs, 1 hotplug CPUs Built 1 zonelists. Total pages: 128051 Kernel command line: root=/dev/sda2 resume=/dev/sda1 splash=silent bootsplash: silent mode. Initializing CPU#0 PID hash table entries: 2048 (order: 11, 16384 bytes) time.c: Using 3.579545 MHz WALL PM GTOD PIT/TSC timer. time.c: Detected 1800.072 MHz processor. Console: colour VGA+ 80x25 Dentry cache hash table entries: 65536 (order: 7, 524288 bytes) Inode-cache hash table entries: 32768 (order: 6, 262144 bytes) Checking aperture... CPU 0: aperture @ d0000000 size 128 MB Memory: 507840k/523968k available (1915k kernel code, 15724k reserved, 1282k data, 188k init) Calibrating delay using timer specific routine.. 3602.33 BogoMIPS (lpj=7204665) Security Framework v1.0.0 initialized Mount-cache hash table entries: 256 CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) CPU: L2 Cache: 512K (64 bytes/line) CPU 0/0 -> Node 0 SMP alternatives: switching to UP code checking if image is initramfs... it is Freeing initrd memory: 3391k freed ACPI: Core revision 20060707 Using local APIC timer interrupts. result 12500506 Detected 12.500 MHz APIC timer. Brought up 1 CPUs testing NMI watchdog ... OK. migration_cost=0 NET: Registered protocol family 16 ACPI: bus type pci registered PCI: BIOS Bug: MCFG area at e0000000 is not E820-reserved PCI: Not using MMCONFIG. PCI: Using configuration type 1 ACPI: Interpreter enabled ACPI: Using IOAPIC for interrupt routing ACPI: PCI Root Bridge [PCI0] (0000:00) PCI: Probing PCI hardware (bus 00) Boot video device is 0000:02:00.0 PCI: Transparent bridge - 0000:00:13.1 ACPI: PCI Interrupt Routing Table [ _SB_.PCI0._PRT] ACPI: PCI Interrupt Routing Table [ _SB_.PCI0.P0P1._PRT] ACPI: PCI Interrupt Routing Table [ _SB_.PCI0.NBPG._PRT] ACPI: PCI Interrupt Routing Table [ _SB_.PCI0.NBP0._PRT] ACPI: PCI Interrupt Routing Table [ _SB_.PCI0.P0P7._PRT] ACPI: PCI Interrupt Routing Table [ _SB_.PCI0.P0PA._PRT] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 *5 6 7 10 11 12 14 15) ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *10 11 12 14 15) ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 10 *11 12 14 15) ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 *10 11 12 14 15) ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 *5 6 7 10 11 12 14 15) ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 10 *11 12 14 15) PCI: Using ACPI for IRQ routing PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report PCI-DMA: Disabling IOMMU. PCI: Bridge: 0000:00:01.0 IO window: disabled. MEM window: disabled. PREFETCH window: disabled. PCI: Bridge: 0000:00:02.0 IO window: d000-dfff MEM window: fbd00000-fbdfffff PREFETCH window: d0000000-d7ffffff PCI: Bridge: 0000:00:03.0 IO window: disabled. MEM window: disabled. PREFETCH window: disabled. PCI: Bridge: 0000:00:13.0 IO window: disabled. MEM window: fbe00000-fbefffff PREFETCH window: disabled. PCI: Bridge: 0000:00:13.1 IO window: e000-efff MEM window: fbf00000-fbffffff PREFETCH window: 30000000-300fffff PCI: Setting latency timer of device 0000:00:01.0 to 64 GSI 16 sharing vector 0xA9 and IRQ 16 ACPI: PCI Interrupt 0000:00:02.0[A] -> GSI 27 (level, low) -> IRQ 169 PCI: Setting latency timer of device 0000:00:02.0 to 64 GSI 17 sharing vector 0xB1 and IRQ 17 ACPI: PCI Interrupt 0000:00:03.0[A] -> GSI 31 (level, low) -> IRQ 177 PCI: Setting latency timer of device 0000:00:03.0 to 64 PCI: Setting latency timer of device 0000:00:13.0 to 64 PCI: Setting latency timer of device 0000:00:13.1 to 64 NET: Registered protocol family 2 IP route cache hash table entries: 4096 (order: 3, 32768 bytes) TCP established hash table entries: 16384 (order: 6, 262144 bytes) TCP bind hash table entries: 8192 (order: 5, 131072 bytes) TCP: Hash tables configured (established 16384 bind 8192) TCP reno registered audit: initializing netlink socket (disabled) audit(1177099946.568:1): initialized Total HugeTLB memory allocated, 0 VFS: Disk quotas dquot_6.5.1 Dquot-cache hash table entries: 512 (order 0, 4096 bytes) Initializing Cryptographic API io scheduler noop registered io scheduler anticipatory registered io scheduler deadline registered io scheduler cfq registered (default) PCI: Setting latency timer of device 0000:00:02.0 to 64 assign_interrupt_mode Found MSI capability Allocate Port Service[0000:00:02.0:pcie00] Allocate Port Service[0000:00:02.0:pcie02] PCI: Setting latency timer of device 0000:00:03.0 to 64 assign_interrupt_mode Found MSI capability Allocate Port Service[0000:00:03.0:pcie00] Allocate Port Service[0000:00:03.0:pcie02] Real Time Clock Driver v1.12ac Non-volatile memory driver v1.2 Linux agpgart interface v0.101 (c) Dave Jones Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing disabled serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A RAMDISK driver initialized: 16 RAM disks of 128000K size 1024 blocksize serio: i8042 AUX port at 0x60,0x64 irq 12 serio: i8042 KBD port at 0x60,0x64 irq 1 mice: PS/2 mouse device common for all mice input: PC Speaker as /class/input/input0 md: md driver 0.90.3 MAX_MD_DEVS=256, MD_SB_DISKS=27 md: bitmap version 4.39 NET: Registered protocol family 1 ACPI: (supports S0 S1 S3 S4 S5) Freeing unused kernel memory: 188k freed Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx SCSI subsystem initialized ACPI: Processor [CPU1] (supports 16 throttling states) ACPI Exception (acpi_processor-0681): AE_NOT_FOUND, Processor Device is not present [20060707] ACPI: Getting cpuindex for acpiid 0x2 libata version 2.00 loaded. sata_via 0000:00:0f.0: version 2.0 GSI 18 sharing vector 0xD1 and IRQ 18 ACPI: PCI Interrupt 0000:00:0f.0[B] -> GSI 21 (level, low) -> IRQ 209 sata_via 0000:00:0f.0: routed to hard irq line 10 ata1: SATA max UDMA/133 cmd 0xCC00 ctl 0xC882 bmdma 0xC400 irq 209 ata2: SATA max UDMA/133 cmd 0xC800 ctl 0xC482 bmdma 0xC408 irq 209 scsi0 : sata_via ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300) ata1.00: ATA-7, max UDMA/133, 312581808 sectors: LBA48 NCQ (depth 0/32) ata1.00: ata1: dev 0 multi count 16 ata1.00: configured for UDMA/133 scsi1 : sata_via ata2: SATA link down 1.5 Gbps (SStatus 0 SControl 300) ATA: abnormal status 0x7F on port 0xC807 Vendor: ATA Model: WDC WD1600AAJS-0 Rev: 05.0 Type: Direct-Access ANSI SCSI revision: 05 SCSI device sda: 312581808 512-byte hdwr sectors (160042 MB) sda: Write Protect is off sda: Mode Sense: 00 3a 00 00 SCSI device sda: drive cache: write back SCSI device sda: 312581808 512-byte hdwr sectors (160042 MB) sda: Write Protect is off sda: Mode Sense: 00 3a 00 00 SCSI device sda: drive cache: write back sda: sda1 sda2 sda3 sd 0:0:0:0: Attached scsi disk sda VP_IDE: IDE controller at PCI slot 0000:00:0f.1 PCI: VIA IRQ fixup for 0000:00:0f.1, from 255 to 0 VP_IDE: chipset revision 7 VP_IDE: not 100% native mode: will probe irqs later VP_IDE: VIA vt8237a (rev 00) IDE UDMA133 controller on pci0000:00:0f.1 ide0: BM-DMA at 0xfc00-0xfc07, BIOS settings: hda:DMA, hdb:pio ide1: BM-DMA at 0xfc08-0xfc0f, BIOS settings: hdc:pio, hdd:pio Probing IDE interface ide0... sd 0:0:0:0: Attached scsi generic sg0 type 0 hda: TSSTcorpCD/DVDW SH-S182D, ATAPI CD/DVD-ROM drive ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 Probing IDE interface ide1... BIOS EDD facility v0.16 2004-Jun-25, 1 devices found Attempting manual resume kjournald starting. Commit interval 5 seconds EXT3 FS on sda2, internal journal EXT3-fs: mounted filesystem with ordered data mode. parport0: PC-style at 0x378 [PCSPP,TRISTATE] lp0: using parport0 (polling). pci_hotplug: PCI Hot Plug PCI Core version: 0.5 shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 usbcore: registered new driver usbfs usbcore: registered new driver hub USB Universal Host Controller Interface driver v3.0 GSI 19 sharing vector 0xD9 and IRQ 19 ACPI: PCI Interrupt 0000:00:10.0[A] -> GSI 20 (level, low) -> IRQ 217 PCI: VIA IRQ fixup for 0000:00:10.0, from 5 to 9 uhci_hcd 0000:00:10.0: UHCI Host Controller uhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 1 uhci_hcd 0000:00:10.0: irq 217, io base 0x0000bc00 usb usb1: new device found, idVendor=0000, idProduct=0000 usb usb1: new device strings: Mfr=3, Product=2, SerialNumber=1 usb usb1: Product: UHCI Host Controller usb usb1: Manufacturer: Linux 2.6.18.8-0.1-default uhci_hcd usb usb1: SerialNumber: 0000:00:10.0 usb usb1: configuration #1 chosen from 1 choice hub 1-0:1.0: USB hub found hub 1-0:1.0: 2 ports detected GSI 20 sharing vector 0xE1 and IRQ 20 ACPI: PCI Interrupt 0000:00:10.1[B] -> GSI 22 (level, low) -> IRQ 225 PCI: VIA IRQ fixup for 0000:00:10.1, from 10 to 1 uhci_hcd 0000:00:10.1: UHCI Host Controller uhci_hcd 0000:00:10.1: new USB bus registered, assigned bus number 2 uhci_hcd 0000:00:10.1: irq 225, io base 0x0000b880 usb usb2: new device found, idVendor=0000, idProduct=0000 usb usb2: new device strings: Mfr=3, Product=2, SerialNumber=1 usb usb2: Product: UHCI Host Controller usb usb2: Manufacturer: Linux 2.6.18.8-0.1-default uhci_hcd usb usb2: SerialNumber: 0000:00:10.1 usb usb2: configuration #1 chosen from 1 choice hub 2-0:1.0: USB hub found hub 2-0:1.0: 2 ports detected ACPI: PCI Interrupt 0000:00:10.2[C] -> GSI 21 (level, low) -> IRQ 209 PCI: VIA IRQ fixup for 0000:00:10.2, from 11 to 1 uhci_hcd 0000:00:10.2: UHCI Host Controller uhci_hcd 0000:00:10.2: new USB bus registered, assigned bus number 3 uhci_hcd 0000:00:10.2: irq 209, io base 0x0000b800 usb usb3: new device found, idVendor=0000, idProduct=0000 usb usb3: new device strings: Mfr=3, Product=2, SerialNumber=1 usb usb3: Product: UHCI Host Controller usb usb3: Manufacturer: Linux 2.6.18.8-0.1-default uhci_hcd usb usb3: SerialNumber: 0000:00:10.2 usb usb3: configuration #1 chosen from 1 choice hub 3-0:1.0: USB hub found hub 3-0:1.0: 2 ports detected GSI 21 sharing vector 0xE9 and IRQ 21 ACPI: PCI Interrupt 0000:00:10.3[D] -> GSI 23 (level, low) -> IRQ 233 PCI: VIA IRQ fixup for 0000:00:10.3, from 10 to 9 uhci_hcd 0000:00:10.3: UHCI Host Controller uhci_hcd 0000:00:10.3: new USB bus registered, assigned bus number 4 uhci_hcd 0000:00:10.3: irq 233, io base 0x0000b480 usb usb4: new device found, idVendor=0000, idProduct=0000 usb usb4: new device strings: Mfr=3, Product=2, SerialNumber=1 usb usb4: Product: UHCI Host Controller usb usb4: Manufacturer: Linux 2.6.18.8-0.1-default uhci_hcd usb usb4: SerialNumber: 0000:00:10.3 usb usb4: configuration #1 chosen from 1 choice hub 4-0:1.0: USB hub found hub 4-0:1.0: 2 ports detected ACPI: PCI Interrupt 0000:00:10.4[C] -> GSI 21 (level, low) -> IRQ 209 PCI: VIA IRQ fixup for 0000:00:10.4, from 11 to 1 ehci_hcd 0000:00:10.4: EHCI Host Controller ehci_hcd 0000:00:10.4: new USB bus registered, assigned bus number 5 ehci_hcd 0000:00:10.4: irq 209, io mem 0xfbcffc00 ehci_hcd 0000:00:10.4: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 usb usb5: new device found, idVendor=0000, idProduct=0000 usb usb5: new device strings: Mfr=3, Product=2, SerialNumber=1 usb usb5: Product: EHCI Host Controller usb usb5: Manufacturer: Linux 2.6.18.8-0.1-default ehci_hcd usb usb5: SerialNumber: 0000:00:10.4 usb usb5: configuration #1 chosen from 1 choice hub 5-0:1.0: USB hub found hub 5-0:1.0: 8 ports detected GSI 22 sharing vector 0x32 and IRQ 22 ACPI: PCI Interrupt 0000:04:01.0[A] -> GSI 17 (level, low) -> IRQ 50 PCI: Setting latency timer of device 0000:04:01.0 to 64 hda: ATAPI 94X DVD-ROM DVD-R-RAM CD-R/RW drive, 2048kB Cache, UDMA(33) Uniform CD-ROM driver Revision: 3.20 hda_codec: Unknown model for ALC880, trying auto-probe from BIOS... ALSA sound/pci/hda/hda_codec.c:2117: autoconfig: line_outs=4 (0x14/0x15/0x16/0x17/0x0) ALSA sound/pci/hda/hda_codec.c:2121: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0) ALSA sound/pci/hda/hda_codec.c:2123: hp=0x1b, dig_out=0x1e, din_in=0x0 ALSA sound/pci/hda/hda_codec.c:2131: inputs: mic=0x18, fmic=0x19, line=0x1a, fline=0x0, cd=0x1c, aux=0x0 r8169 Gigabit Ethernet driver 2.2LK loaded ACPI: PCI Interrupt 0000:05:09.0[A] -> GSI 20 (level, low) -> IRQ 217 eth0: RTL8169s/8110s at 0xffffc2000001ec00, 00:17:31:69:c2:22, IRQ 217 usb 5-6: new high speed USB device using ehci_hcd and address 2 usb 5-6: new device found, idVendor=0bda, idProduct=0111 usb 5-6: new device strings: Mfr=1, Product=2, SerialNumber=3 usb 5-6: Product: USB2.0-CRW usb 5-6: Manufacturer: Generic usb 5-6: SerialNumber: 20021111153705700 usb 5-6: configuration #1 chosen from 1 choice Initializing USB Mass Storage driver... scsi2 : SCSI emulation for USB Mass Storage devices usb-storage: device found at 2 usb-storage: waiting for device to settle before scanning usbcore: registered new driver usb-storage USB Mass Storage support registered. Adding 2104472k swap on /dev/sda1. Priority:-1 extents:1 across:2104472k usb 4-1: new low speed USB device using uhci_hcd and address 2 usb 4-1: new device found, idVendor=1267, idProduct=0201 usb 4-1: new device strings: Mfr=0, Product=1, SerialNumber=0 usb 4-1: Product: USB Mouse usb 4-1: configuration #1 chosen from 1 choice usb 4-2: new low speed USB device using uhci_hcd and address 3 device-mapper: ioctl: 4.7.0-ioctl (2006-06-24) initialised: dm-devel@redhat.com usb 4-2: new device found, idVendor=099a, idProduct=610c usb 4-2: new device strings: Mfr=1, Product=2, SerialNumber=0 usb 4-2: Product: USB Multimedia Keyboard usb 4-2: Manufacturer: usb 4-2: configuration #1 chosen from 1 choice usbcore: registered new driver hiddev input: USB Mouse as /class/input/input1 input: USB HID v1.00 Mouse [USB Mouse] on usb-0000:00:10.3-1 input: USB Multimedia Keyboard as /class/input/input2 input: USB HID v1.00 Keyboard [ USB Multimedia Keyboard ] on usb-0000:00:10.3-2 input: USB Multimedia Keyboard as /class/input/input3 input: USB HID v1.00 Device [ USB Multimedia Keyboard ] on usb-0000:00:10.3-2 usbcore: registered new driver usbhid drivers/usb/input/hid-core.c: v2.6:USB HID core driver Vendor: Generic- Model: Compact Flash Rev: 1.00 Type: Direct-Access ANSI SCSI revision: 00 sd 2:0:0:0: Attached scsi removable disk sdb sd 2:0:0:0: Attached scsi generic sg1 type 0 Vendor: Generic- Model: SM/xD-Picture Rev: 1.00 Type: Direct-Access ANSI SCSI revision: 00 sd 2:0:0:1: Attached scsi removable disk sdc sd 2:0:0:1: Attached scsi generic sg2 type 0 Vendor: Generic- Model: SD/MMC Rev: 1.00 Type: Direct-Access ANSI SCSI revision: 00 sd 2:0:0:2: Attached scsi removable disk sdd sd 2:0:0:2: Attached scsi generic sg3 type 0 Vendor: Generic- Model: MS/MS-Pro Rev: 1.00 Type: Direct-Access ANSI SCSI revision: 00 sd 2:0:0:3: Attached scsi removable disk sde sd 2:0:0:3: Attached scsi generic sg4 type 0 usb-storage: device scan complete loop: loaded (max 8 devices) kjournald starting. Commit interval 5 seconds EXT3 FS on sda3, internal journal EXT3-fs: mounted filesystem with ordered data mode. AppArmor: AppArmor initialized audit(1177099961.592:2): AppArmor initialized NET: Registered protocol family 10 lo: Disabled Privacy Extensions IPv6 over IPv4 tunneling driver ip6_tables: (C) 2000-2006 Netfilter Core Team ip_tables: (C) 2000-2006 Netfilter Core Team Netfilter messages via NETLINK v0.30. ip_conntrack version 2.4 (2046 buckets, 16368 max) - 288 bytes per conntrack ACPI: Power Button (FF) [PWRF] ACPI: Power Button (CM) [PWRB] powernow-k8: Found 1 AMD Athlon(tm) 64 Processor 3000+ processors (version 2.00.00) powernow-k8: 0 : fid 0xa (1800 MHz), vid 0x8 powernow-k8: 1 : fid 0x2 (1000 MHz), vid 0x12 r8169: eth0: link up NET: Registered protocol family 17 audit(1177089175.908:3): audit_pid=3387 old=0 by auid=4294967295 eth0: no IPv6 routers present parport0: PC-style at 0x378 [PCSPP,TRISTATE] parport0: PC-style at 0x378 [PCSPP,TRISTATE] lp0: using parport0 (polling). ppa: Version 2.07 (for Linux 2.4.x) st: Version 20050830, fixed bufsize 32768, s/g segs 256