# XFree86 4 configuration created by pyxf86config

Section "ServerLayout"
	Identifier     "Default Layout"
	#Screen      	0 "NBScreen VESA" 0 0
	Screen      	0 "NBScreen Via" 0 0

	InputDevice    "NBTastatur"	"CoreKeyboard"

	InputDevice    "Maus"		"CorePointer"
	#InputDevice    "Synaptics"	"AlwaysCore"

#	InputDevice    "Maus"		"AlwaysCore"
#	InputDevice    "Synaptics"	"CorePointer"

	# http://www.gentoo.org/doc/en/power-management-guide.xml
  	Option		"BlankTime"	"5"  # Blank the screen after 5 minutes (Fake)
	Option		"StandbyTime"	"10" # Turn off screen after 10 minutes (DPMS)
	Option		"SuspendTime"	"20" # Full suspend after 20 minutes
	Option		"OffTime"	"30" # Turn off after half an hour
EndSection

Section "Files"

# file minus the extension (like ".txt" or ".db").  There is normally
# no need to change the default.
# Multiple FontPath entries are allowed (they are concatenated together)
# By default, Red Hat 6.0 and later now use a font server independent of
# the X server to render fonts.

	#FontPath     "unix/:7100"
	FontPath     "/usr/share/fonts/TTF"
	FontPath     "/usr/share/fonts/Type1"
	FontPath     "/usr/share/fonts/cyrillic"
	FontPath     "/usr/share/fonts/default"
	FontPath     "/usr/share/fonts/encodings"
	FontPath     "/usr/share/fonts/fonts.cache-1"
	FontPath     "/usr/share/fonts/local"
	FontPath     "/usr/share/fonts/misc"
	FontPath     "/usr/share/fonts/terminus"
	FontPath     "/usr/share/fonts/ukr"
	FontPath     "/usr/share/fonts/util"
	# http://www.xubuntuguide.org/tiki-index.php?page=En:Edgy&redirectpage=HomePage#Small_font_sizes
	FontPath	"/usr/share/fonts/100dpi/:unscaled"
	FontPath	"/usr/share/fonts/100dpi"
EndSection

Section "Module"
	Load  "dbe"
	#Load  "extmod"
	Load  "fbdevhw"
	Load  "glx"
	Load  "record"
	Load  "freetype"
	Load  "type1"
#	Load  "synaptics"
	Load  "dri"

	Load  "xtrap"
	SubSection	"extmod"
		Option	"omit xfree86-dga"
	EndSubSection
EndSection

Section "InputDevice"

# Specify which keyboard LEDs can be user-controlled (eg, with xset(1))
#	Option	"Xleds"		"1 2 3"
# To disable the XKEYBOARD extension, uncomment XkbDisable.
#	Option	"XkbDisable"
# To customise the XKB settings to suit your keyboard, modify the
# lines below (which are the defaults).  For example, for a non-U.S.
# keyboard, you will probably want to use:
#	Option	"XkbModel"	"pc102"
# If you have a US Microsoft Natural keyboard, you can use:
#	Option	"XkbModel"	"microsoft"
#
# Then to change the language, change the Layout setting.
# For example, a german layout can be obtained with:
#	Option	"XkbLayout"	"de"
# or:
#	Option	"XkbLayout"	"de"
#	Option	"XkbVariant"	"nodeadkeys"
#
# If you'd like to switch the positions of your capslock and
# control keys, use:
#	Option	"XkbOptions"	"ctrl:swapcaps"
# Or if you just want both to be control, use:
#	Option	"XkbOptions"	"ctrl:nocaps"
#
	Identifier  "NBTastatur"
	Driver      "kbd"
	Option	    "XkbModel"		"pc105"
	Option	    "XkbLayout"		"de"
	#Option	    "XkbVariant"	"nodeadkeys"
	# Bei alt_shift_toggle funktioniert in Gnome der Taskswitcher nicht
	# mehr so gut
	#Option	    "XkbOptions"	"grp_led:scroll,grp:alt_shift_toggle,lv3:lwin_switch,altwin:meta_super,compose:rwin"
	Option	    "XkbOptions"	"grp_led:scroll,lv3:lwin_switch,altwin:meta_super,compose:rwin"
EndSection

Section "InputDevice"
	Identifier  "Maus"
	Driver      "mouse"
	Option	    "Protocol"		"IMPS/2"
	Option	    "Device"		"/dev/input/mice"
	Option	    "ZAxisMapping"	 "4 5"
	Option	    "Emulate3Buttons"	 "yes"
EndSection

Section "InputDevice"
	Identifier  "Synaptics"
	Driver      "synaptics"
	#Option	    "Device"		"/dev/input/mice"
	#Option	    "Device"		"/dev/misc/psaux"

	Option	    "Protocol"		"auto-dev"

	# Synaptics auto-dev sets device to /dev/input/event2
	#Option	    "Device"		"/dev/input/event2"
	
	Option	    "Emulate3Buttons"	"yes"
	#Option	    "LeftEdge"		"120"
	#Option	    "RightEdge"		"830"
	#Option	    "TopEdge"		"120"
	#Option	    "BottomEdge"	"650"
	#Option	    "FingerLow"		"14"
	#Option	    "FingerHigh"	"15"
	#Option	    "MaxTapMove"	"110"
	#Option	    "VertScrollDelta"	"20"
	#Option	    "HorizScrollDelta"	"20"
	#Option	    "MinSpeed"		"0.3"
	#Option	    "MaxSpeed"		"0.75"
	Option      "SHMConfig"		"on"
	# http://copland.udel.edu/~doke/dell_d810/
	# -> http://linux-on-laptops.com/forum/showthread.php?t=112
	# Tap Click auf Touchpad deaktivieren
	Option      "MaxTapTime"	"0"

	# http://linux-on-laptops.com/forum/showthread.php?t=112
	Option	    "InputFashion"	"Mouse"
EndSection

Section "Monitor"
	Identifier   "NBMonitor"
	VendorName   "Monitor Vendor"
	ModelName    "LCD Panel 1024x768"
	#HorizSync    31.5 - 48.5
	#VertRefresh  40.0 - 75.0
	Option	     "DPMS" "true"
	# http://www.xubuntuguide.org/tiki-index.php?page=En:Edgy&redirectpage=HomePage#Small_font_sizes
	DisplaySize  270.93 203.2
EndSection

Section "Device"
	Identifier  "VESA Videocard"
	Driver      "vesa"
	VendorName  "Videocard vendor"
	BoardName   "VESA driver (generic)"
EndSection

Section "Device"
	Identifier  "Via UniChrome PN800"
	Driver	    "via"
	Option	    "EnableAGPDMA"	"True"
EndSection

Section "Screen"
	Identifier "NBScreen VESA"
	Device     "VESA Videocard"
	Monitor    "NBMonitor"
	DefaultDepth     24
	SubSection "Display"
		Viewport   0 0
		Depth     16
		Modes    "1024x768" "800x600"
	EndSubSection
	SubSection "Display"
		Viewport   0 0
		Depth     24
		Modes    "1024x768" "800x600"
	EndSubSection
EndSection

Section "Screen"
	Identifier "NBScreen Via"
	Device     "Via UniChrome PN800"
	Monitor    "NBMonitor"
	DefaultDepth     24
	SubSection "Display"
		Viewport   0 0
		Depth     16
		Modes    "1024x768" "800x600"
	EndSubSection
	SubSection "Display"
		Viewport   0 0
		Depth     24
		Modes    "1024x768" "800x600"
	EndSubSection
EndSection

Section "DRI"
	Group        0
	Mode         0666
EndSection