Using PowerMac machine description Total memory = 768MB; using 2048kB for hash table (at cfe00000) Linux version 2.6.18-4-powerpc (Debian 2.6.18.dfsg.1-12) (waldi@debian.org) (gcc version 4.1.2 20061115 (prerelease) (Debian 4.1.1-21)) #1 Mon Mar 26 09:11:14 CEST 2007 Found initrd at 0xc1900000:0xc1e1c000 Found UniNorth memory controller & host bridge @ 0xf8000000 revision: 0xd2 Mapped at 0xfdfc0000 Found a Intrepid mac-io controller, rev: 0, mapped at 0xfdf40000 Processor NAP mode on idle enabled. PowerMac motherboard: iBook G4 via-pmu: Server Mode is disabled PMU driver v2 initialized for Core99, firmware: 0c Found UniNorth PCI host bridge at 0x00000000f0000000. Firmware bus number: 0->0 Found UniNorth PCI host bridge at 0x00000000f2000000. Firmware bus number: 0->0 Found UniNorth PCI host bridge at 0x00000000f4000000. Firmware bus number: 0->0 nvram: Checking bank 0... nvram: gen0=332, gen1=331 nvram: Active bank is: 0 nvram: OF partition at 0x410 nvram: XP partition at 0x1020 nvram: NR partition at 0x1120 Top of RAM: 0x30000000, Total RAM: 0x30000000 Memory hole size: 0MB On node 0 totalpages: 196608 DMA zone: 196608 pages, LIFO batch:31 Built 1 zonelists. Total pages: 196608 Kernel command line: root=/dev/hda3 ro mpic: Setting up MPIC " MPIC 1 " version 1.2 at 80040000, max 4 CPUs mpic: ISU size: 64, shift: 6, mask: 3f mpic: Initializing for 64 sources PID hash table entries: 4096 (order: 12, 16384 bytes) GMT Delta read from XPRAM: 0 minutes, DST: off time_init: decrementer frequency = 18.432000 MHz time_init: processor frequency = 1066.666664 MHz Console: colour dummy device 80x25 serial8250_console_init: nothing to do on PowerMac Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) High memory: 0k Memory: 767872k/786432k available (2920k kernel code, 18076k reserved, 272k data, 197k bss, 180k init) Calibrating delay loop... 36.73 BogoMIPS (lpj=73472) Security Framework v1.0.0 initialized SELinux: Disabled at boot. Capability LSM initialized Mount-cache hash table entries: 512 device-tree: Duplicate name in /cpus/PowerPC,G4@0, renamed to "l2-cache#1" checking if image is initramfs... it is Freeing initrd memory: 5232k freed NET: Registered protocol family 16 KeyWest i2c @0xf8001003 irq 42 /uni-n@f8000000/i2c@f8001000 channel 0 bus channel 1 bus KeyWest i2c @0x80018000 irq 26 /pci@f2000000/mac-io@17/i2c@18000 channel 0 bus PMU i2c /pci@f2000000/mac-io@17/via-pmu@16000/pmu-i2c channel 1 bus channel 2 bus PCI: Probing PCI hardware PCI: Cannot allocate resource region 0 of device 0001:10:18.0 PCI: Cannot allocate resource region 0 of device 0001:10:19.0 Apple USB OHCI 0001:10:18.0 disabled by firmware Apple USB OHCI 0001:10:19.0 disabled by firmware NET: Registered protocol family 2 IP route cache hash table entries: 32768 (order: 5, 131072 bytes) TCP established hash table entries: 131072 (order: 7, 524288 bytes) TCP bind hash table entries: 65536 (order: 6, 262144 bytes) TCP: Hash tables configured (established 131072 bind 65536) TCP reno registered Thermal assist unit not available Registering PowerMac CPU frequency driver Low: 533 Mhz, High: 1066 Mhz, Boot: 533 Mhz audit: initializing netlink socket (disabled) audit(1177316005.520:1): initialized VFS: Disk quotas dquot_6.5.1 Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) Initializing Cryptographic API io scheduler noop registered io scheduler anticipatory registered io scheduler deadline registered io scheduler cfq registered (default) PCI: Enabling device 0000:00:10.0 (0006 -> 0007) radeonfb (0000:00:10.0): Invalid ROM signature 0 should be 0xaa55 radeonfb: Retrieved PLL infos from Open Firmware radeonfb: Reference=27.00 MHz (RefDiv=12) Memory=190.00 Mhz, System=183.00 MHz radeonfb: PLL min 12000 max 35000 radeonfb: Monitor 1 type LCD found radeonfb: EDID probed radeonfb: Monitor 2 type no found radeonfb: Using Firmware dividers 0x000600ad from PPLL 0 radeonfb: Dynamic Clock Power Management enabled Console: switching to colour frame buffer device 128x48 radeonfb: Backlight initialized (radeonbl0) radeonfb (0000:00:10.0): ATI Radeon \c Generic RTC Driver v1.07 Macintosh non-volatile memory driver v1.1 serial8250_init: nothing to do on PowerMac pmac_zilog: 0.6 (Benjamin Herrenschmidt ) ttyS0 at MMIO 0x80013020 (irq = 22) is a Z85c30 ESCC - Serial port ttyS1 at MMIO 0x80013000 (irq = 23) is a Z85c30 ESCC - Serial port RAMDISK driver initialized: 16 RAM disks of 8192K size 1024 blocksize MacIO PCI driver attached to Intrepid chipset input: Macintosh mouse button emulation as /class/input/input0 Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx adb: starting probe task... PCI: Enabling device 0002:20:0d.0 (0000 -> 0002) adb devices: [2]: 2 c4 [3]: 3 1 [7]: 7 1f ADB keyboard at 2, handler 1 Detected ADB keyboard, type ISO, swapping keys. input: ADB keyboard as /class/input/input1 input: ADB Powerbook buttons as /class/input/input2 ADB mouse at 3, handler set to 4 (trackpad) input: ADB mouse as /class/input/input3 adb: finished probe task... ide0: Found Apple UniNorth ATA-6 controller, bus ID 3, irq 39 Probing IDE interface ide0... hda: WDC WD1200VE-00KWT0, ATA DISK drive hda: Enabling Ultra DMA 5 ide0 at 0xf1022000-0xf1022007,0xf1022160 on irq 39 ide1: Found Apple KeyLargo ATA-3 controller, bus ID 0, irq 24 Probing IDE interface ide1... hdc: MATSHITACD-RW CW-8123, ATAPI CD/DVD-ROM drive hdc: Enabling MultiWord DMA 2 ide1 at 0xf1012000-0xf1012007,0xf1012160 on irq 24 mice: PS/2 mouse device common for all mice TCP bic registered NET: Registered protocol family 1 NET: Registered protocol family 17 input: PMU as /class/input/input4 Freeing unused kernel memory: 180k init PowerMac i2c bus pmu 2 registered PowerMac i2c bus pmu 1 registered PowerMac i2c bus mac-io 0 registered PowerMac i2c bus uni-n 1 registered PowerMac i2c bus uni-n 0 registered usbcore: registered new driver usbfs usbcore: registered new driver hub ohci_hcd: 2005 April 22 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI) Apple USB OHCI 0001:10:18.0 disabled by firmware Apple USB OHCI 0001:10:19.0 disabled by firmware PCI: Enabling device 0001:10:1a.0 (0000 -> 0002) ohci_hcd 0001:10:1a.0: OHCI Host Controller ohci_hcd 0001:10:1a.0: new USB bus registered, assigned bus number 1 ohci_hcd 0001:10:1a.0: irq 29, io mem 0x80083000 ieee1394: Initialized config rom entry `ip1394' usb usb1: configuration #1 chosen from 1 choice hub 1-0:1.0: USB hub found hub 1-0:1.0: 2 ports detected PCI: Enabling device 0001:10:1b.0 (0000 -> 0002) ohci_hcd 0001:10:1b.0: OHCI Host Controller ohci_hcd 0001:10:1b.0: new USB bus registered, assigned bus number 2 ohci_hcd 0001:10:1b.0: irq 63, io mem 0x80082000 hda: max request size: 512KiB usb usb2: configuration #1 chosen from 1 choice hub 2-0:1.0: USB hub found hub 2-0:1.0: 3 ports detected hda: 234441648 sectors (120034 MB) w/8192KiB Cache, CHS=16383/255/63, UDMA(100) hda: cache flushes supported hda: [mac] hda1 hda2 hda3 hda4 hda5 hda6 PCI: Enabling device 0001:10:1b.1 (0000 -> 0002) ohci_hcd 0001:10:1b.1: OHCI Host Controller ohci_hcd 0001:10:1b.1: new USB bus registered, assigned bus number 3 ohci_hcd 0001:10:1b.1: irq 63, io mem 0x80081000 hdc: ATAPI 24X DVD-ROM CD-R/RW drive, 2048kB Cache, (U)DMA Uniform CD-ROM driver Revision: 3.20 usb usb3: configuration #1 chosen from 1 choice hub 3-0:1.0: USB hub found hub 3-0:1.0: 2 ports detected PCI: Enabling device 0001:10:1b.2 (0004 -> 0006) ehci_hcd 0001:10:1b.2: EHCI Host Controller ehci_hcd 0001:10:1b.2: new USB bus registered, assigned bus number 4 ehci_hcd 0001:10:1b.2: irq 63, io mem 0x80080000 ehci_hcd 0001:10:1b.2: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 usb usb4: configuration #1 chosen from 1 choice hub 4-0:1.0: USB hub found hub 4-0:1.0: 5 ports detected PCI: Enabling device 0002:20:0e.0 (0000 -> 0002) ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[40] MMIO=[f5000000-f50007ff] Max Packet=[2048] IR/IT contexts=[8/8] sungem.c:v0.98 8/24/03 David S. Miller (davem@redhat.com) PHY ID: 4061e4, addr: 0 eth0: Sun GEM (PCI) 10/100/1000BaseT Ethernet 00:0d:93:2d:e9:88 eth0: Found BCM5221 PHY ohci_hcd 0001:10:1b.1: wakeup Attempting manual resume usb 3-1: new low speed USB device using ohci_hcd and address 2 kjournald starting. Commit interval 5 seconds EXT3-fs: mounted filesystem with ordered data mode. usb 3-1: configuration #1 chosen from 1 choice usbcore: registered new driver hiddev input: Logitech USB Receiver as /class/input/input5 input: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-0001:10:1b.1-1 input: Logitech USB Receiver as /class/input/input6 input,hiddev0: USB HID v1.11 Device [Logitech USB Receiver] on usb-0001:10:1b.1-1 usbcore: registered new driver usbhid drivers/usb/input/hid-core.c: v2.6:USB HID core driver ieee1394: Host added: ID:BUS[0-00:1023] GUID[000d93fffe2de988] eth1: Link is up at 100 Mbps, full-duplex. eth1394: eth0: IEEE-1394 IPv4 over 1394 Ethernet (fw-host0) ts: Compaq touchscreen protocol output Linux agpgart interface v0.101 (c) Dave Jones agpgart: Detected Apple UniNorth 2 chipset agpgart: configuring for size idx: 4 agpgart: AGP aperture is 16M @ 0x0 Adding 2246084k swap on /dev/hda4. Priority:-1 extents:1 across:2246084k EXT3 FS on hda3, internal journal apm_emu: APM Emulation 0.5 initialized. loop: loaded (max 8 devices) SCSI subsystem initialized ieee1394: sbp2: Driver forced to serialize I/O (serialize_io=1) ieee1394: sbp2: Try serialize_io=0 for better performance adt746x: version 1 (supported) adt746x: Thermostat bus: 1, address: 0x2e, limit_adjust: 0, fan_speed: -1 sensor 0: PWR/MEMORY BOTTOMSIDE sensor 1: CPU BOTTOMSIDE sensor 2: GPU ON DIE adt746x: ADT7467 initializing adt746x: Lowering max temperatures from 69, 92, 101 to 70, 50, 70 ieee80211_crypt: registered algorithm 'NULL' ieee80211: 802.11 data/management/control stack, git-1.1.13 ieee80211: Copyright (C) 2004-2005 Intel Corporation bcm43xx driver PCI: Enabling device 0001:10:12.0 (0004 -> 0006) bcm43xx: Chip ID 0x4306, rev 0x3 bcm43xx: Number of cores: 5 bcm43xx: Core 0: ID 0x800, rev 0x4, vendor 0x4243, enabled bcm43xx: Core 1: ID 0x812, rev 0x5, vendor 0x4243, disabled bcm43xx: Core 2: ID 0x80d, rev 0x2, vendor 0x4243, enabled bcm43xx: Core 3: ID 0x807, rev 0x2, vendor 0x4243, disabled bcm43xx: Core 4: ID 0x804, rev 0x9, vendor 0x4243, enabled bcm43xx: PHY connected bcm43xx: Detected PHY: Version: 2, Type 2, Revision 2 bcm43xx: Detected Radio: ID: 2205017f (Manuf: 17f Ver: 2050 Rev: 2) bcm43xx: Radio turned off bcm43xx: Radio turned off ieee80211_crypt: registered algorithm 'TKIP' ieee80211_crypt: registered algorithm 'CCMP' device-mapper: ioctl: 4.7.0-ioctl (2006-06-24) initialised: dm-devel@redhat.com hdc: packet command error: status=0x51 { DriveReady SeekComplete Error } hdc: packet command error: error=0x54 { AbortedCommand LastFailedSense=0x05 } ide: failed opcode was: unknown input: PowerMac Beep as /class/input/input7 lp: driver loaded but no devices found bcm43xx: PHY connected bcm43xx: Microcode rev 0x127, pl 0xe (2005-04-18 02:36:27) bcm43xx: Radio turned on bcm43xx: Chip initialized bcm43xx: 32-bit DMA initialized bcm43xx: Keys cleared bcm43xx: Selected 802.11 core (phytype 2) bcm43xx: set security called, .level = 0, .enabled = 0, .encrypt = 0 eth1: Link is up at 100 Mbps, full-duplex. eth1: Pause is disabled input: Mouseemu virtual keyboard as /class/input/input8 input: Mouseemu virtual mouse as /class/input/input9 NET: Registered protocol family 10 lo: Disabled Privacy Extensions ADDRCONF(NETDEV_UP): eth2: link is not ready IPv6 over IPv4 tunneling driver Bluetooth: Core ver 2.10 NET: Registered protocol family 31 Bluetooth: HCI device and connection manager initialized Bluetooth: HCI socket layer initialized Bluetooth: L2CAP ver 2.8 Bluetooth: L2CAP socket layer initialized Bluetooth: RFCOMM socket layer initialized Bluetooth: RFCOMM TTY layer initialized Bluetooth: RFCOMM ver 1.8 [drm] Initialized drm 1.0.1 20051102 [drm] Initialized radeon 1.25.0 20060524 on minor 0 agpgart: Putting AGP V2 device at 0000:00:0b.0 into 1x mode agpgart: Putting AGP V2 device at 0000:00:10.0 into 1x mode [drm] Setting GART location based on new memory map [drm] Can't use AGP base @0x00000000, won't fit [drm] Loading R200 Microcode [drm] writeback test succeeded in 1 usecs eth1: no IPv6 routers present