ition 0 Mar 13 08:43:04 localhost gconfd (root-7568): démarrage (version 2.12.0), pid 7568 utilisateur « root » Mar 13 08:43:04 localhost gconfd (root-7568): Adresse « xml:readonly:/etc/gconf/gconf.xml.mandatory » résolue vers une source de configuration en lecture seule à la position 0 Mar 13 08:43:04 localhost gconfd (root-7568): Adresse « xml:readonly:/usr/share/gconf/local.mandatory » résolue vers une source de configuration en lecture seule à la position 1 Mar 13 08:43:04 localhost gconfd (root-7568): Adresse « xml:readwrite:/root/.gconf » résolue vers une source de configuration accessible en écriture à la position 2 Mar 13 08:43:04 localhost gconfd (root-7568): Adresse « xml:readonly:/etc/gconf/gconf.xml.defaults » résolue vers une source de configuration en lecture seule à la position 3 Mar 13 08:43:04 localhost gconfd (root-7568): Adresse « xml:readonly:/usr/share/gconf/local.defaults » résolue vers une source de configuration en lecture seule à la position 4 Mar 13 08:43:04 localhost gconfd (root-7568): Adresse « xml:readonly:/usr/share/gconf/cdd.defaults » résolue vers une source de configuration en lecture seule à la position 5 Mar 13 08:43:04 localhost gconfd (root-7568): Adresse « xml:readonly:/usr/share/gconf/debian.defaults » résolue vers une source de configuration en lecture seule à la position 6 Mar 13 08:43:04 localhost gconfd (root-7568): Adresse « xml:readonly:/var/lib/gconf/defaults » résolue vers une source de configuration en lecture seule à la position 7 Mar 13 08:44:35 localhost gconfd (root-7568): Le serveur GConf n'est pas en cours d'utilisation, arrêt. Mar 13 08:44:35 localhost gconfd (root-7568): Sortie Mar 13 08:44:43 localhost exiting on signal 15 Mar 13 08:44:44 localhost syslogd 1.4.1#17ubuntu3: restart. Mar 13 09:04:46 localhost -- MARK -- Mar 13 09:24:47 localhost -- MARK -- Mar 13 09:44:48 localhost -- MARK -- Mar 13 10:04:50 localhost -- MARK -- Mar 13 10:24:57 localhost -- MARK -- Mar 13 10:45:02 localhost -- MARK -- Mar 13 11:05:02 localhost -- MARK -- Mar 13 11:18:07 localhost gconfd (sej-7267): Sortie Mar 13 11:18:09 localhost shutdown[6574]: shutting down for system reboot Mar 13 11:18:40 localhost kernel: Kernel logging (proc) stopped. Mar 13 11:18:41 localhost kernel: Kernel log daemon terminating. Mar 13 11:18:41 localhost exiting on signal 15 Mar 13 11:22:40 localhost syslogd 1.4.1#17ubuntu3: restart. Mar 13 11:22:40 localhost kernel: Inspecting /boot/System.map-2.6.12-10-386 Mar 13 11:22:41 localhost kernel: Loaded 29010 symbols from /boot/System.map-2.6.12-10-386. Mar 13 11:22:41 localhost kernel: Symbols match kernel version 2.6.12. Mar 13 11:22:41 localhost kernel: No module symbols loaded - kernel modules not enabled. Mar 13 11:22:41 localhost kernel: [4294667.296000] Linux version 2.6.12-10-386 (buildd@terranova) (gcc version 3.4.5 20050809 (prerelease) (Ubuntu 3.4.4-6ubuntu8)) #1 Mon Feb 13 12:13:15 UTC 2006 Mar 13 11:22:41 localhost kernel: [4294667.296000] BIOS-provided physical RAM map: Mar 13 11:22:41 localhost kernel: [4294667.296000] BIOS-e820: 0000000000000000 - 000000000009f000 (usable) Mar 13 11:22:41 localhost kernel: [4294667.296000] BIOS-e820: 000000000009f000 - 0000000000100000 (reserved) Mar 13 11:22:41 localhost kernel: [4294667.296000] BIOS-e820: 0000000000100000 - 000000000fff0000 (usable) Mar 13 11:22:41 localhost kernel: [4294667.296000] BIOS-e820: 000000000fff0000 - 000000000ffff000 (ACPI data) Mar 13 11:22:41 localhost kernel: [4294667.296000] BIOS-e820: 000000000ffff000 - 0000000010000000 (ACPI NVS) Mar 13 11:22:41 localhost kernel: [4294667.296000] BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved) Mar 13 11:22:41 localhost kernel: [4294667.296000] 0MB HIGHMEM available. Mar 13 11:22:41 localhost kernel: [4294667.296000] 255MB LOWMEM available. Mar 13 11:22:41 localhost kernel: [4294667.296000] DMI 2.2 present. Mar 13 11:22:41 localhost kernel: [4294667.296000] Allocating PCI resources starting at 10000000 (gap: 10000000:eff80000) Mar 13 11:22:41 localhost kernel: [4294667.296000] Built 1 zonelists Mar 13 11:22:41 localhost kernel: [4294667.296000] Kernel command line: root=/dev/hda1 ro apic acpi=off pci=biosirq quiet splash Mar 13 11:22:41 localhost kernel: [4294667.296000] Local APIC disabled by BIOS -- you can enable it with "lapic" Mar 13 11:22:41 localhost kernel: [4294667.296000] Initializing CPU#0 Mar 13 11:22:41 localhost kernel: [4294667.296000] PID hash table entries: 1024 (order: 10, 16384 bytes) Mar 13 11:22:41 localhost kernel: [ 0.000000] Detected 849.764 MHz processor.Mar 13 11:22:41 localhost kernel: [ 14.637901] Using tsc for high-res timesource Mar 13 11:22:41 localhost kernel: [ 14.639679] Console: colour VGA+ 80x25 Mar 13 11:22:41 localhost kernel: [ 14.640906] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes) Mar 13 11:22:41 localhost kernel: [ 14.642628] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes) Mar 13 11:22:41 localhost kernel: [ 14.660449] Memory: 251140k/262080k available (1416k kernel code, 10292k reserved, 762k data, 224k init, 0k highmem) Mar 13 11:22:41 localhost kernel: [ 14.660460] Checking if this processor honours the WP bit even in supervisor mode... Ok. Mar 13 11:22:41 localhost kernel: [ 14.681786] Security Framework v1.0.0 initialized Mar 13 11:22:41 localhost kernel: [ 14.681802] SELinux: Disabled at boot. Mar 13 11:22:41 localhost kernel: [ 14.681827] Mount-cache hash table entries: 512 Mar 13 11:22:41 localhost kernel: [ 14.682124] Enabling disabled K7/SSE Support. Mar 13 11:22:41 localhost kernel: [ 14.682132] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) Mar 13 11:22:41 localhost kernel: [ 14.682139] CPU: L2 Cache: 64K (64 bytes/line) Mar 13 11:22:41 localhost kernel: [ 14.682155] CPU: AMD mobile AMD Duron(tm) Processor stepping 00 Mar 13 11:22:41 localhost kernel: [ 14.682164] Enabling fast FPU save and restore... done. Mar 13 11:22:41 localhost kernel: [ 14.682170] Enabling unmasked SIMD FPU exception support... done. Mar 13 11:22:41 localhost kernel: [ 14.682180] Checking 'hlt' instruction... OK. Mar 13 11:22:41 localhost kernel: [ 14.685727] Checking for popad bug... OK. Mar 13 11:22:41 localhost kernel: [ 14.686194] checking if image is initramfs... it is Mar 13 11:22:41 localhost kernel: [ 15.619925] Freeing initrd memory: 5171k freed Mar 13 11:22:41 localhost kernel: [ 15.621244] NET: Registered protocol family 16 Mar 13 11:22:41 localhost kernel: [ 15.621338] EISA bus registered Mar 13 11:22:41 localhost kernel: [ 15.634476] PCI: PCI BIOS revision 2.10 entry at 0xfd8b0, last bus=1 Mar 13 11:22:41 localhost kernel: [ 15.634493] PCI: Using configuration type 1Mar 13 11:22:41 localhost kernel: [ 15.634502] mtrr: v2.0 (20020519) Mar 13 11:22:41 localhost kernel: [ 15.635368] ACPI: Subsystem revision 20050729 Mar 13 11:22:41 localhost kernel: [ 15.635374] ACPI: Interpreter disabled. Mar 13 11:22:41 localhost kernel: [ 15.635383] Linux Plug and Play Support v0.97 (c) Adam Belay Mar 13 11:22:41 localhost kernel: [ 15.635402] pnp: PnP ACPI: disabled Mar 13 11:22:41 localhost kernel: [ 15.635412] PnPBIOS: Scanning system for PnP BIOS support... Mar 13 11:22:41 localhost kernel: [ 15.635466] PnPBIOS: Found PnP BIOS installation structure at 0xc00f7c50 Mar 13 11:22:41 localhost kernel: [ 15.635474] PnPBIOS: PnP BIOS version 1.0, entry 0xf0000:0xa616, dseg 0x400 Mar 13 11:22:41 localhost kernel: [ 15.640493] PnPBIOS: 17 nodes reported by PnP BIOS; 17 recorded by driver Mar 13 11:22:41 localhost kernel: [ 15.640646] PCI: Probing PCI hardware Mar 13 11:22:41 localhost kernel: [ 15.640654] PCI: Probing PCI hardware (bus 00) Mar 13 11:22:41 localhost kernel: [ 15.642501] PCI: Using ALI IRQ Router Mar 13 11:22:41 localhost kernel: [ 15.642511] PCI: Using IRQ router ALI [10b9/1533] at 0000:00:07.0 Mar 13 11:22:41 localhost kernel: [ 15.642538] PCI: IRQ 0 for device 0000:00:08.0 doesn't match PIRQ mask - try pci=usepirqmask Mar 13 11:22:41 localhost kernel: [ 15.642552] PCI: IRQ 0 for device 0000:00:08.1 doesn't match PIRQ mask - try pci=usepirqmask Mar 13 11:22:41 localhost kernel: [ 15.644478] pnp: 00:0a: ioport range 0x4d0-0x4d1 has been reserved Mar 13 11:22:41 localhost kernel: [ 15.644487] pnp: 00:0a: ioport range 0x8000-0x803f has been reserved Mar 13 11:22:41 localhost kernel: [ 15.644507] pnp: 00:0a: ioport range 0x8040-0x804f has been reserved Mar 13 11:22:41 localhost kernel: [ 15.645726] audit: initializing netlink socket (disabled) Mar 13 11:22:41 localhost kernel: [ 15.645751] audit: initialized Mar 13 11:22:41 localhost kernel: [ 15.646020] VFS: Disk quotas dquot_6.5.1 Mar 13 11:22:41 localhost kernel: [ 15.646079] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) Mar 13 11:22:41 localhost kernel: [ 15.646164] devfs: 2004-01-31 Richard Gooch (rgooch@atnf.csiro.au) Mar 13 11:22:41 localhost kernel: [ 15.646174] devfs: boot_options: 0x0 Mar 13 11:22:41 localhost kernel: [ 15.646262] Initializing Cryptographic API Mar 13 11:22:41 localhost kernel: [ 15.646276] Limiting direct PCI/PCI transfers. Mar 13 11:22:41 localhost kernel: [ 15.646297] Activating ISA DMA hang workarounds. Mar 13 11:22:41 localhost kernel: [ 15.646669] isapnp: Scanning for PnP cards... Mar 13 11:22:41 localhost kernel: [ 16.000529] isapnp: No Plug & Play device found Mar 13 11:22:41 localhost kernel: [ 16.055572] PNP: PS/2 Controller [PNP0303,PNP0f13] at 0x60,0x64 irq 1,12 Mar 13 11:22:41 localhost kernel: [ 16.067162] serio: i8042 AUX port at 0x60,0x64 irq 12 Mar 13 11:22:41 localhost kernel: [ 16.068067] serio: i8042 KBD port at 0x60,0x64 irq 1 Mar 13 11:22:41 localhost kernel: [ 16.068079] Serial: 8250/16550 driver $Revision: 1.90 $ 54 ports, IRQ sharing enabled Mar 13 11:22:41 localhost kernel: [ 16.068402] ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A Mar 13 11:22:41 localhost kernel: [ 16.072684] ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A Mar 13 11:22:41 localhost kernel: [ 16.072967] io scheduler noop registered Mar 13 11:22:41 localhost kernel: [ 16.073007] io scheduler anticipatory registered Mar 13 11:22:41 localhost kernel: [ 16.073017] io scheduler deadline registered Mar 13 11:22:41 localhost kernel: [ 16.073075] io scheduler cfq registered Mar 13 11:22:41 localhost kernel: [ 16.073859] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize Mar 13 11:22:41 localhost kernel: [ 16.075309] EISA: Probing bus 0 at eisa.0 Mar 13 11:22:41 localhost kernel: [ 16.075328] Cannot allocate resource for EISA slot 1 Mar 13 11:22:41 localhost kernel: [ 16.075370] Cannot allocate resource for EISA slot 8 Mar 13 11:22:41 localhost kernel: [ 16.075374] EISA: Detected 0 cards. Mar 13 11:22:41 localhost kernel: [ 16.075452] NET: Registered protocol family 2 Mar 13 11:22:41 localhost kernel: [ 16.087214] IP: routing cache hash table of 2048 buckets, 16Kbytes Mar 13 11:22:41 localhost kernel: [ 16.087560] TCP established hash table entries: 16384 (order: 5, 131072 bytes) Mar 13 11:22:41 localhost kernel: [ 16.088167] TCP bind hash table entries: 16384 (order: 4, 65536 bytes) Mar 13 11:22:41 localhost kernel: [ 16.088472] TCP: Hash tables configured (established 16384 bind 16384) Mar 13 11:22:41 localhost kernel: [ 16.088683] NET: Registered protocol family 8 Mar 13 11:22:41 localhost kernel: [ 16.088689] NET: Registered protocol family 20 Mar 13 11:22:41 localhost kernel: [ 16.089665] Freeing unused kernel memory: 224k freed Mar 13 11:22:41 localhost kernel: [ 16.112898] input: AT Translated Set 2 keyboard on isa0060/serio0 Mar 13 11:22:41 localhost kernel: [ 16.150180] vga16fb: mapped to 0xc00a0000 Mar 13 11:22:41 localhost kernel: [ 16.222132] Console: switching to colour frame buffer device 80x30 Mar 13 11:22:41 localhost kernel: [ 16.222146] fb0: VGA16 VGA frame buffer device Mar 13 11:22:41 localhost kernel: [ 17.401835] Capability LSM initialized Mar 13 11:22:41 localhost kernel: [ 17.435656] NET: Registered protocol family 1 Mar 13 11:22:41 localhost kernel: [ 17.482595] Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 Mar 13 11:22:41 localhost kernel: [ 17.482632] ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx Mar 13 11:22:41 localhost kernel: [ 17.494649] ALI15X3: IDE controller at PCI slot 0000:00:0f.0 Mar 13 11:22:41 localhost kernel: [ 17.494697] ALI15X3: chipset revision 195 Mar 13 11:22:41 localhost kernel: [ 17.494702] ALI15X3: not 100%% native mode: will probe irqs later Mar 13 11:22:41 localhost kernel: [ 17.494743] ide0: BM-DMA at 0x1000-0x1007, BIOS settings: hda:DMA, hdb:pio Mar 13 11:22:41 localhost kernel: [ 17.494773] ide1: BM-DMA at 0x1008-0x100f, BIOS settings: hdc:DMA, hdd:pio Mar 13 11:22:41 localhost kernel: [ 17.758873] hda: HITACHI_DK23CA-20, ATA DISK drive Mar 13 11:22:41 localhost kernel: [ 18.371397] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 Mar 13 11:22:41 localhost kernel: [ 19.044101] hdc: TOSHIBA DVD-ROM SD-R2002, ATAPI CD/DVD-ROM drive Mar 13 11:22:41 localhost kernel: [ 19.350221] ide1 at 0x170-0x177,0x376 on irq 15 Mar 13 11:22:41 localhost kernel: [ 21.413139] hda: max request size: 128KiB Mar 13 11:22:41 localhost kernel: [ 21.413648] hda: 39070080 sectors (20003 MB) w/2048KiB Cache, CHS=38760/16/63, UDMA(33) Mar 13 11:22:41 localhost kernel: [ 21.413663] hda: cache flushes not supported Mar 13 11:22:41 localhost kernel: [ 21.413832] /dev/ide/host0/bus0/target0/lun0: p1 p2 < p5 p6 > Mar 13 11:22:41 localhost kernel: [ 21.476870] hdc: ATAPI 24X DVD-ROM CD-R/RW drive, 2048kB Cache Mar 13 11:22:41 localhost kernel: [ 21.476891] Uniform CD-ROM driver Revision: 3.20 Mar 13 11:22:41 localhost kernel: [ 22.646591] Attempting manual resume Mar 13 11:22:41 localhost kernel: [ 22.689711] swsusp: Suspend partition has wrong signature? Mar 13 11:22:41 localhost kernel: [ 22.750099] usbcore: registered new driver usbfs Mar 13 11:22:41 localhost kernel: [ 22.750170] usbcore: registered new driver hub Mar 13 11:22:41 localhost kernel: [ 22.752397] PCI: IRQ 9 for device 0000:00:02.0 doesn't match PIRQ mask - try pci=usepirqmask Mar 13 11:22:41 localhost kernel: [ 22.752409] PCI: Found IRQ 9 for device 0000:00:02.0 Mar 13 11:22:41 localhost kernel: [ 22.752486] ohci_hcd 0000:00:02.0: ALi Corporation USB 1.1 Controller Mar 13 11:22:41 localhost kernel: [ 22.752993] ohci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 1 Mar 13 11:22:41 localhost kernel: [ 22.753022] ohci_hcd 0000:00:02.0: irq 9, io mem 0xfff70000 Mar 13 11:22:41 localhost kernel: [ 22.805796] hub 1-0:1.0: USB hub found Mar 13 11:22:41 localhost kernel: [ 22.805833] hub 1-0:1.0: 2 ports detected Mar 13 11:22:41 localhost kernel: [ 22.958118] Linux Tulip driver version 1.1.13 (May 11, 2002) Mar 13 11:22:41 localhost kernel: [ 22.958225] PCI: Enabling device 0000:00:10.0 (0010 -> 0013) Mar 13 11:22:41 localhost kernel: [ 22.958242] PCI: setting IRQ 11 as level-triggered Mar 13 11:22:41 localhost kernel: [ 22.958250] PCI: Assigned IRQ 11 for device 0000:00:10.0 Mar 13 11:22:41 localhost kernel: [ 22.958263] PCI: Sharing IRQ 11 with 0000:00:04.0 Mar 13 11:22:41 localhost kernel: [ 22.958270] PCI: Sharing IRQ 11 with 0000:00:04.1 Mar 13 11:22:41 localhost kernel: [ 22.958283] PCI: Sharing IRQ 11 with 0000:01:00.0 Mar 13 11:22:41 localhost kernel: [ 22.958870] tulip0: MII transceiver #1 config 1000 status 7849 advertising 01e1. Mar 13 11:22:41 localhost kernel: [ 22.964057] eth0: ADMtek Comet rev 17 at 00011c00, 00:D0:59:90:69:CC, IRQ 11. Mar 13 11:22:41 localhost kernel: [ 26.645873] Attempting manual resume Mar 13 11:22:41 localhost kernel: [ 26.646239] swsusp: Suspend partition has wrong signature? Mar 13 11:22:41 localhost kernel: [ 26.665799] EXT3-fs: INFO: recovery required on readonly filesystem. Mar 13 11:22:41 localhost kernel: [ 26.665812] EXT3-fs: write access will be enabled during recovery. Mar 13 11:22:41 localhost kernel: [ 27.261853] kjournald starting. Commit interval 5 seconds Mar 13 11:22:41 localhost kernel: [ 27.261898] EXT3-fs: recovery complete. Mar 13 11:22:41 localhost kernel: [ 27.281070] EXT3-fs: mounted filesystem with ordered data mode. Mar 13 11:22:41 localhost kernel: [ 28.877943] md: md driver 0.90.1 MAX_MD_DEVS=256, MD_SB_DISKS=27 Mar 13 11:22:41 localhost kernel: [ 35.643967] Adding 779144k swap on /dev/hda5. Priority:-1 extents:1 Mar 13 11:22:41 localhost kernel: [ 36.026676] EXT3 FS on hda1, internal journal Mar 13 11:22:41 localhost kernel: [ 45.895514] parport: PnPBIOS parport detected. Mar 13 11:22:41 localhost kernel: [ 45.895649] parport0: PC-style at 0x378 (0x778), irq 7, dma 3 [PCSPP,TRISTATE,COMPAT,ECP,DMA] Mar 13 11:22:41 localhost kernel: [ 45.995146] lp0: using parport0 (interrupt-driven). Mar 13 11:22:41 localhost kernel: [ 46.064611] mice: PS/2 mouse device common for all mice Mar 13 11:22:41 localhost kernel: [ 46.992126] Synaptics Touchpad, model: 1, fw: 5.1, id: 0x8f40b1, caps: 0x80471b/0x0 Mar 13 11:22:41 localhost kernel: [ 47.005903] input: SynPS/2 Synaptics TouchPad on isa0060/serio1 Mar 13 11:22:41 localhost kernel: [ 47.895081] ts: Compaq touchscreen protocol output Mar 13 11:22:41 localhost kernel: [ 50.910439] device-mapper: 4.4.0-ioctl (2005-01-12) initialised: dm-devel@redhat.com Mar 13 11:22:41 localhost kernel: [ 53.667368] kjournald starting. Commit interval 5 seconds Mar 13 11:22:41 localhost kernel: [ 53.668147] EXT3 FS on hda6, internal journal Mar 13 11:22:41 localhost kernel: [ 53.668159] EXT3-fs: mounted filesystem with ordered data mode. Mar 13 11:22:41 localhost kernel: [ 55.584068] Linux agpgart interface v0.101 (c) Dave Jones Mar 13 11:22:41 localhost kernel: [ 55.609642] agpgart: Detected ALi M1647 chipset Mar 13 11:22:41 localhost kernel: [ 55.667400] agpgart: AGP aperture is 64M @ 0xf0000000 Mar 13 11:22:41 localhost kernel: [ 56.010176] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 Mar 13 11:22:41 localhost kernel: [ 56.430239] Linux Kernel Card Services Mar 13 11:22:41 localhost kernel: [ 56.430252] options: [pci] [cardbus] [pm] Mar 13 11:22:41 localhost kernel: [ 56.469743] PCI: Assigned IRQ 11 for device 0000:00:04.0 Mar 13 11:22:41 localhost kernel: [ 56.469765] PCI: Sharing IRQ 11 with 0000:00:04.1 Mar 13 11:22:41 localhost kernel: [ 56.469781] PCI: Sharing IRQ 11 with 0000:00:10.0 Mar 13 11:22:41 localhost kernel: [ 56.469789] PCI: Sharing IRQ 11 with 0000:01:00.0 Mar 13 11:22:41 localhost kernel: [ 56.469831] Yenta: CardBus bridge found at 0000:00:04.0 [103c:0018] Mar 13 11:22:41 localhost kernel: [ 56.469876] Yenta: Enabling burst memory read transactions Mar 13 11:22:41 localhost kernel: [ 56.469884] Yenta: Using CSCINT to route CSC interrupts to PCI Mar 13 11:22:41 localhost kernel: [ 56.469890] Yenta: Routing CardBus interrupts to PCI Mar 13 11:22:41 localhost kernel: [ 56.469899] Yenta TI: socket 0000:00:04.0, mfunc 0x009c1b22, devctl 0x66 Mar 13 11:22:41 localhost kernel: [ 56.691412] Yenta: ISA IRQ mask 0x0438, PCI irq 11 Mar 13 11:22:41 localhost kernel: [ 56.691422] Socket status: 30000020 Mar 13 11:22:41 localhost kernel: [ 56.700809] PCI: Assigned IRQ 11 for device 0000:00:04.1 Mar 13 11:22:41 localhost kernel: [ 56.700829] PCI: Sharing IRQ 11 with 0000:00:04.0 Mar 13 11:22:41 localhost kernel: [ 56.700846] PCI: Sharing IRQ 11 with 0000:00:10.0 Mar 13 11:22:41 localhost kernel: [ 56.700854] PCI: Sharing IRQ 11 with 0000:01:00.0 Mar 13 11:22:41 localhost kernel: [ 56.700935] Yenta: CardBus bridge found at 0000:00:04.1 [103c:0018] Mar 13 11:22:41 localhost kernel: [ 56.700983] Yenta: Using CSCINT to route CSC interrupts to PCI Mar 13 11:22:41 localhost kernel: [ 56.700989] Yenta: Routing CardBus interrupts to PCI Mar 13 11:22:41 localhost kernel: [ 56.700999] Yenta TI: socket 0000:00:04.1, mfunc 0x009c1b22, devctl 0x66 Mar 13 11:22:41 localhost kernel: [ 56.922639] Yenta: ISA IRQ mask 0x0438, PCI irq 11 Mar 13 11:22:41 localhost kernel: [ 56.922649] Socket status: 30000006 Mar 13 11:22:41 localhost kernel: [ 57.758181] ali1535_smbus 0000:00:06.0: ALI1535 not detected, module not inserted. Mar 13 11:22:41 localhost kernel: [ 58.377045] PCI: IRQ 0 for device 0000:00:08.0 doesn't match PIRQ mask - try pci=usepirqmask Mar 13 11:22:41 localhost kernel: [ 58.377064] PCI: setting IRQ 5 as level-triggered Mar 13 11:22:41 localhost kernel: [ 58.377072] PCI: Assigned IRQ 5 for device 0000:00:08.0 Mar 13 11:22:41 localhost kernel: [ 58.377092] PCI: Sharing IRQ 5 with 0000:00:08.1 Mar 13 11:22:41 localhost kernel: [ 62.387610] Real Time Clock Driver v1.12 Mar 13 11:22:41 localhost kernel: [ 62.663696] input: PC Speaker Mar 13 11:22:41 localhost kernel: [ 63.290893] Floppy drive(s): fd0 is 1.44M Mar 13 11:22:41 localhost kernel: [ 63.304628] FDC 0 is a post-1991 82077 Mar 13 11:22:41 localhost kernel: [ 64.678811] ndiswrapper version 1.1 loaded (preempt=no,smp=no) Mar 13 11:22:41 localhost kernel: [ 64.777134] ndiswrapper: driver net8180 (Realtek,10/07/2004,5.173.1007.2004) loaded Mar 13 11:22:41 localhost kernel: [ 64.777729] PCI: Enabling device 0000:02:00.0 (0000 -> 0003) Mar 13 11:22:41 localhost kernel: [ 64.838957] ndiswrapper: using irq 11 Mar 13 11:22:41 localhost kernel: [ 65.394726] wlan0: ndiswrapper ethernet device 00:09:5b:8a:ca:f9 using driver net8180, configuration file 10EC:8180.5.conf Mar 13 11:22:41 localhost kernel: [ 65.394827] wlan0: encryption modes supported: WEP, WPA with TKIP, WPA with AES/CCMP Mar 13 11:22:41 localhost kernel: [ 66.139169] NET: Registered protocol family 17 Mar 13 11:22:41 localhost kernel: [ 74.222363] NET: Registered protocol family 10 Mar 13 11:22:41 localhost kernel: [ 74.222710] Disabled Privacy Extensions on device c02eb280(lo) Mar 13 11:22:41 localhost kernel: [ 74.223097] IPv6 over IPv4 tunneling driverMar 13 11:22:52 localhost hp: unable to open /var/run/hplip/hpiod.port: No such file or directory: prnt/hpijs/hplip_api.c 75 Mar 13 11:22:53 localhost hpiod: 0.9.5 accepting connections at 32770... Mar 13 11:22:58 localhost kernel: [ 94.030951] apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac) Mar 13 11:23:01 localhost kernel: [ 97.290326] hdc: drive_cmd: status=0x51 { DriveReady SeekComplete Error } Mar 13 11:23:01 localhost kernel: [ 97.290344] hdc: drive_cmd: error=0x04 { AbortedCommand } Mar 13 11:23:01 localhost kernel: [ 97.290351] ide: failed opcode was: 0xef Mar 13 11:23:02 localhost kernel: [ 98.237365] cs: IO port probe 0x100-0x4ff: excluding 0x200-0x207 0x408-0x40f 0x480-0x48f Mar 13 11:23:02 localhost kernel: [ 98.241079] cs: IO port probe 0x100-0x4ff: excluding 0x200-0x207 0x408-0x40f 0x480-0x48f Mar 13 11:23:02 localhost kernel: [ 98.245809] cs: IO port probe 0xc00-0xcf7: clean. Mar 13 11:23:02 localhost kernel: [ 98.246832] cs: IO port probe 0xc00-0xcf7: clean. Mar 13 11:23:02 localhost kernel: [ 98.248461] cs: IO port probe 0xa00-0xaff: clean. Mar 13 11:23:02 localhost kernel: [ 98.249516] cs: IO port probe 0xa00-0xaff: clean. Mar 13 11:23:03 localhost kernel: [ 98.826162] powernow: PowerNOW! Technology present. Can scale: frequency and voltage. Mar 13 11:23:03 localhost kernel: [ 98.843798] powernow: SGTC: 10000 Mar 13 11:23:03 localhost kernel: [ 98.843807] powernow: Minimum speed 298 MHz. Maximum speed 845 MHz. Mar 13 11:23:03 localhost kernel: [ 99.195119] Bluetooth: Core ver 2.7 Mar 13 11:23:03 localhost kernel: [ 99.195149] NET: Registered protocol family 31 Mar 13 11:23:03 localhost kernel: [ 99.195154] Bluetooth: HCI device and connection manager initialized Mar 13 11:23:03 localhost kernel: [ 99.195188] Bluetooth: HCI socket layer initialized Mar 13 11:23:03 localhost kernel: [ 99.258686] Bluetooth: L2CAP ver 2.7 Mar 13 11:23:03 localhost kernel: [ 99.258703] Bluetooth: L2CAP socket layer initialized Mar 13 11:23:03 localhost kernel: [ 99.310437] Bluetooth: RFCOMM ver 1.5 Mar 13 11:23:03 localhost kernel: [ 99.310469] Bluetooth: RFCOMM socket layer initialized Mar 13 11:23:03 localhost kernel: [ 99.310501] Bluetooth: RFCOMM TTY layer initialized Mar 13 11:23:06 localhost gconfd (sej-7191): démarrage (version 2.12.0), pid 7191 utilisateur « sej » Mar 13 11:23:06 localhost gconfd (sej-7191): Adresse « xml:readonly:/etc/gconf/gconf.xml.mandatory » résolue vers une source de configuration en lecture seule à la position 0 Mar 13 11:23:06 localhost gconfd (sej-7191): Adresse « xml:readonly:/usr/share/gconf/local.mandatory » résolue vers une source de configuration en lecture seule à la position 1 Mar 13 11:23:06 localhost gconfd (sej-7191): Adresse « xml:readwrite:/home/sej/.gconf » résolue vers une source de configuration accessible en écriture à la position 2 Mar 13 11:23:06 localhost gconfd (sej-7191): Adresse « xml:readonly:/etc/gconf/gconf.xml.defaults » résolue vers une source de configuration en lecture seule à la position 3 Mar 13 11:23:06 localhost gconfd (sej-7191): Adresse « xml:readonly:/usr/share/gconf/local.defaults » résolue vers une source de configuration en lecture seule à la position 4 Mar 13 11:23:06 localhost gconfd (sej-7191): Adresse « xml:readonly:/usr/share/gconf/cdd.defaults » résolue vers une source de configuration en lecture seule à la position 5 Mar 13 11:23:06 localhost gconfd (sej-7191): Adresse « xml:readonly:/usr/share/gconf/debian.defaults » résolue vers une source de configuration en lecture seule à la position 6 Mar 13 11:23:06 localhost gconfd (sej-7191): Adresse « xml:readonly:/var/lib/gconf/defaults » résolue vers une source de configuration en lecture seule à la position 7 Mar 13 11:23:18 localhost gconfd (sej-7191): Adresse « xml:readwrite:/home/sej/.gconf » résolue vers une source de configuration accessible en écriture à la position 0 Mar 13 11:42:40 localhost -- MARK -- Mar 13 12:02:40 localhost -- MARK -- Mar 13 12:22:41 localhost -- MARK -- Mar 13 12:42:41 localhost -- MARK -- Mar 13 13:02:41 localhost -- MARK -- Mar 13 13:22:41 localhost -- MARK -- Mar 13 13:42:41 localhost -- MARK -- Mar 13 14:02:41 localhost -- MARK -- Mar 13 14:22:41 localhost -- MARK -- Mar 13 14:42:41 localhost -- MARK -- Mar 13 15:02:41 localhost -- MARK -- Mar 13 15:22:41 localhost -- MARK --