smartctl version 5.36 [i686-pc-linux-gnu] Copyright (C) 2002-6 Bruce Allen Home page is http://smartmontools.sourceforge.net/ === START OF INFORMATION SECTION === Device Model: ST3802110A Serial Number: 5LRB2JLM Firmware Version: 3.AAJ User Capacity: 80,026,361,856 bytes Device is: Not in smartctl database [for details use: -P showall] ATA Version is: 7 ATA Standard is: Exact ATA specification draft version not indicated Local Time is: Wed Apr 25 18:03:58 2007 CEST SMART support is: Available - device has SMART capability. SMART support is: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x82) Offline data collection activity was completed without error. Auto Offline Data Collection: Enabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: ( 430) seconds. Offline data collection capabilities: (0x5b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. No Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 1) minutes. Extended self-test routine recommended polling time: ( 27) minutes. SMART Attributes Data Structure revision number: 10 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE 1 Raw_Read_Error_Rate 0x000f 071 071 006 Pre-fail Always - 0 3 Spin_Up_Time 0x0003 095 094 000 Pre-fail Always - 0 4 Start_Stop_Count 0x0032 100 100 020 Old_age Always - 11 5 Reallocated_Sector_Ct 0x0033 100 100 036 Pre-fail Always - 0 7 Seek_Error_Rate 0x000f 077 066 030 Pre-fail Always - 56380512 9 Power_On_Hours 0x0032 099 099 000 Old_age Always - 1530 10 Spin_Retry_Count 0x0013 100 100 097 Pre-fail Always - 0 12 Power_Cycle_Count 0x0032 100 100 020 Old_age Always - 16 187 Unknown_Attribute 0x0032 032 032 000 Old_age Always - 68 189 Unknown_Attribute 0x003a 098 098 000 Old_age Always - 2 190 Unknown_Attribute 0x0022 069 059 045 Old_age Always - 555286559 194 Temperature_Celsius 0x0022 031 041 000 Old_age Always - 31 (Lifetime Min/Max 0/19) 195 Hardware_ECC_Recovered 0x001a 046 045 000 Old_age Always - 46655164 197 Current_Pending_Sector 0x0012 097 097 000 Old_age Always - 67 198 Offline_Uncorrectable 0x0010 097 097 000 Old_age Offline - 67 199 UDMA_CRC_Error_Count 0x003e 200 200 000 Old_age Always - 0 200 Multi_Zone_Error_Rate 0x0000 100 253 000 Old_age Offline - 0 202 TA_Increase_Count 0x0032 100 253 000 Old_age Always - 0 SMART Error Log Version: 1 ATA Error Count: 68 (device log contains only the most recent five errors) CR = Command Register [HEX] FR = Features Register [HEX] SC = Sector Count Register [HEX] SN = Sector Number Register [HEX] CL = Cylinder Low Register [HEX] CH = Cylinder High Register [HEX] DH = Device/Head Register [HEX] DC = Device Command Register [HEX] ER = Error register [HEX] ST = Status register [HEX] Powered_Up_Time is measured from power on, and printed as DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes, SS=sec, and sss=millisec. It "wraps" after 49.710 days. Error 68 occurred at disk power-on lifetime: 1436 hours (59 days + 20 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 40 51 00 5d fe c5 e0 Error: UNC at LBA = 0x00c5fe5d = 12975709 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- 25 00 08 57 fe c5 e0 00 06:08:50.979 READ DMA EXT 35 00 10 7f 00 18 e0 00 06:08:50.978 WRITE DMA EXT 35 00 28 4f 00 18 e0 00 06:08:50.978 WRITE DMA EXT 35 00 08 4f 00 90 e0 00 06:08:50.978 WRITE DMA EXT 35 00 20 4f 00 b0 e0 00 06:08:50.978 WRITE DMA EXT Error 67 occurred at disk power-on lifetime: 1436 hours (59 days + 20 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 40 51 00 5d fe c5 e0 Error: UNC at LBA = 0x00c5fe5d = 12975709 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- 25 00 08 57 fe c5 e0 00 06:08:40.157 READ DMA EXT 25 00 08 4f fe c5 e0 00 06:08:40.149 READ DMA EXT 25 00 08 47 fe c5 e0 00 06:08:40.146 READ DMA EXT 25 00 08 3f fe c5 e0 00 06:08:48.856 READ DMA EXT 25 00 08 d7 86 ad e0 00 06:08:48.856 READ DMA EXT Error 66 occurred at disk power-on lifetime: 1436 hours (59 days + 20 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 40 51 00 5d fe c5 e0 Error: UNC at LBA = 0x00c5fe5d = 12975709 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- 25 00 50 57 fe c5 e0 00 06:08:40.157 READ DMA EXT 25 00 58 4f fe c5 e0 00 06:08:40.149 READ DMA EXT 25 00 60 47 fe c5 e0 00 06:08:40.146 READ DMA EXT 25 00 68 3f fe c5 e0 00 06:08:40.135 READ DMA EXT 25 00 98 27 e5 c5 e0 00 06:08:40.135 READ DMA EXT Error 65 occurred at disk power-on lifetime: 1436 hours (59 days + 20 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 40 51 00 5d fe c5 e0 Error: UNC at LBA = 0x00c5fe5d = 12975709 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- 25 00 58 4f fe c5 e0 00 06:08:40.157 READ DMA EXT 25 00 60 47 fe c5 e0 00 06:08:40.149 READ DMA EXT 25 00 68 3f fe c5 e0 00 06:08:40.146 READ DMA EXT 25 00 98 27 e5 c5 e0 00 06:08:40.135 READ DMA EXT 25 00 00 27 e4 c5 e0 00 06:08:40.135 READ DMA EXT Error 64 occurred at disk power-on lifetime: 1436 hours (59 days + 20 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 40 51 00 5d fe c5 e0 Error: UNC at LBA = 0x00c5fe5d = 12975709 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- 25 00 60 47 fe c5 e0 00 06:08:40.157 READ DMA EXT 25 00 68 3f fe c5 e0 00 06:08:40.149 READ DMA EXT 25 00 98 27 e5 c5 e0 00 06:08:40.146 READ DMA EXT 25 00 00 27 e4 c5 e0 00 06:08:40.135 READ DMA EXT 25 00 00 27 e3 c5 e0 00 06:08:40.135 READ DMA EXT SMART Self-test log structure revision number 1 SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay.