dmesg mory: 316k freed [ 45.800374] PM: Adding info for No Bus:vcs1 [ 45.800409] PM: Adding info for No Bus:vcsa1 [ 45.818459] input: AT Translated Set 2 keyboard as /class/input/input0 [ 45.896849] PM: Adding info for No Bus:vcs2 [ 45.896903] PM: Adding info for No Bus:vcsa2 [ 45.897282] PM: Removing info for No Bus:vcs2 [ 45.897317] PM: Removing info for No Bus:vcsa2 [ 45.898836] PM: Adding info for No Bus:vcs2 [ 45.898879] PM: Adding info for No Bus:vcsa2 [ 45.901202] PM: Removing info for No Bus:vcs2 [ 45.901243] PM: Removing info for No Bus:vcsa2 [ 45.902300] PM: Adding info for No Bus:vcs2 [ 45.902336] PM: Adding info for No Bus:vcsa2 [ 45.903222] PM: Removing info for No Bus:vcs2 [ 45.903261] PM: Removing info for No Bus:vcsa2 [ 45.903926] PM: Adding info for No Bus:vcs3 [ 45.903964] PM: Adding info for No Bus:vcsa3 [ 45.904338] PM: Removing info for No Bus:vcs3 [ 45.904372] PM: Removing info for No Bus:vcsa3 [ 45.905915] PM: Adding info for No Bus:vcs3 [ 45.905959] PM: Adding info for No Bus:vcsa3 [ 45.908281] PM: Removing info for No Bus:vcs3 [ 45.908323] PM: Removing info for No Bus:vcsa3 [ 45.909378] PM: Adding info for No Bus:vcs3 [ 45.909414] PM: Adding info for No Bus:vcsa3 [ 45.910301] PM: Removing info for No Bus:vcs3 [ 45.910341] PM: Removing info for No Bus:vcsa3 [ 45.911016] PM: Adding info for No Bus:vcs4 [ 45.911053] PM: Adding info for No Bus:vcsa4 [ 45.911420] PM: Removing info for No Bus:vcs4 [ 45.911454] PM: Removing info for No Bus:vcsa4 [ 45.913018] PM: Adding info for No Bus:vcs4 [ 45.913069] PM: Adding info for No Bus:vcsa4 [ 45.915359] PM: Removing info for No Bus:vcs4 [ 45.915399] PM: Removing info for No Bus:vcsa4 [ 45.916450] PM: Adding info for No Bus:vcs4 [ 45.916487] PM: Adding info for No Bus:vcsa4 [ 45.917376] PM: Removing info for No Bus:vcs4 [ 45.917416] PM: Removing info for No Bus:vcsa4 [ 45.918094] PM: Adding info for No Bus:vcs5 [ 45.918131] PM: Adding info for No Bus:vcsa5 [ 45.918499] PM: Removing info for No Bus:vcs5 [ 45.918533] PM: Removing info for No Bus:vcsa5 [ 45.920123] PM: Adding info for No Bus:vcs5 [ 45.920165] PM: Adding info for No Bus:vcsa5 [ 45.922448] PM: Removing info for No Bus:vcs5 [ 45.922489] PM: Removing info for No Bus:vcsa5 [ 45.923542] PM: Adding info for No Bus:vcs5 [ 45.923579] PM: Adding info for No Bus:vcsa5 [ 45.924467] PM: Removing info for No Bus:vcs5 [ 45.924506] PM: Removing info for No Bus:vcsa5 [ 45.925191] PM: Adding info for No Bus:vcs6 [ 45.925229] PM: Adding info for No Bus:vcsa6 [ 45.925597] PM: Removing info for No Bus:vcs6 [ 45.925631] PM: Removing info for No Bus:vcsa6 [ 45.927207] PM: Adding info for No Bus:vcs6 [ 45.927250] PM: Adding info for No Bus:vcsa6 [ 45.929526] PM: Removing info for No Bus:vcs6 [ 45.929566] PM: Removing info for No Bus:vcsa6 [ 45.930622] PM: Adding info for No Bus:vcs6 [ 45.930660] PM: Adding info for No Bus:vcsa6 [ 45.931549] PM: Removing info for No Bus:vcs6 [ 45.931589] PM: Removing info for No Bus:vcsa6 [ 45.995577] PM: Adding info for No Bus:vcs8 [ 45.995630] PM: Adding info for No Bus:vcsa8 [ 47.010654] PM: Adding info for No Bus:device-mapper [ 47.010686] device-mapper: ioctl: 4.11.0-ioctl (2006-10-12) initialised: dm-devel@redhat.com [ 47.042188] ACPI Exception (acpi_processor-0677): AE_NOT_FOUND, Processor Device is not present [20060707] [ 47.561638] usbcore: registered new interface driver usbfs [ 47.561662] usbcore: registered new interface driver hub [ 47.561686] usbcore: registered new device driver usb [ 47.562525] USB Universal Host Controller Interface driver v3.0 [ 47.562571] ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 16 (level, low) -> IRQ 16 [ 47.562582] PCI: Setting latency timer of device 0000:00:1d.0 to 64 [ 47.562586] uhci_hcd 0000:00:1d.0: UHCI Host Controller [ 47.562696] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1 [ 47.562721] uhci_hcd 0000:00:1d.0: irq 16, io base 0x0000eec0 [ 47.562769] PM: Adding info for usb:usb1 [ 47.562813] PM: Adding info for No Bus:usbdev1.1_ep00 [ 47.562828] usb usb1: configuration #1 chosen from 1 choice [ 47.562837] PM: Adding info for usb:1-0:1.0 [ 47.562855] hub 1-0:1.0: USB hub found [ 47.562861] hub 1-0:1.0: 2 ports detected [ 47.635488] SCSI subsystem initialized [ 47.639973] libata version 2.00 loaded. [ 47.653576] ieee1394: Initialized config rom entry `ip1394' [ 47.664270] PM: Adding info for No Bus:usbdev1.1_ep81 [ 47.664353] ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) -> IRQ 17 [ 47.664364] PCI: Setting latency timer of device 0000:00:1d.1 to 64 [ 47.664368] uhci_hcd 0000:00:1d.1: UHCI Host Controller [ 47.664391] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2 [ 47.664416] uhci_hcd 0000:00:1d.1: irq 17, io base 0x0000ef00 [ 47.664462] PM: Adding info for usb:usb2 [ 47.664498] PM: Adding info for No Bus:usbdev2.1_ep00 [ 47.664512] usb usb2: configuration #1 chosen from 1 choice [ 47.664521] PM: Adding info for usb:2-0:1.0 [ 47.664541] hub 2-0:1.0: USB hub found [ 47.664548] hub 2-0:1.0: 2 ports detected [ 47.679114] ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI) [ 47.770064] PM: Adding info for No Bus:usbdev2.1_ep81 [ 47.770165] ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 18 [ 47.770177] PCI: Setting latency timer of device 0000:00:1d.2 to 64 [ 47.770181] uhci_hcd 0000:00:1d.2: UHCI Host Controller [ 47.770204] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3 [ 47.770230] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000ef20 [ 47.770275] PM: Adding info for usb:usb3 [ 47.770313] PM: Adding info for No Bus:usbdev3.1_ep00 [ 47.770326] usb usb3: configuration #1 chosen from 1 choice [ 47.770338] PM: Adding info for usb:3-0:1.0 [ 47.770358] hub 3-0:1.0: USB hub found [ 47.770365] hub 3-0:1.0: 2 ports detected [ 47.836045] Floppy drive(s): fd0 is 1.44M [ 47.871930] PM: Adding info for No Bus:usbdev3.1_ep81 [ 47.872003] ACPI: PCI Interrupt 0000:00:1d.3[A] -> GSI 16 (level, low) -> IRQ 16 [ 47.872015] PCI: Setting latency timer of device 0000:00:1d.3 to 64 [ 47.872019] uhci_hcd 0000:00:1d.3: UHCI Host Controller [ 47.872042] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 4 [ 47.872065] uhci_hcd 0000:00:1d.3: irq 16, io base 0x0000ef40 [ 47.872112] PM: Adding info for usb:usb4 [ 47.872149] PM: Adding info for No Bus:usbdev4.1_ep00 [ 47.872163] usb usb4: configuration #1 chosen from 1 choice [ 47.872174] PM: Adding info for usb:4-0:1.0 [ 47.872193] hub 4-0:1.0: USB hub found [ 47.872199] hub 4-0:1.0: 2 ports detected [ 47.886468] FDC 0 is a post-1991 82077 [ 47.887386] PM: Adding info for platform:floppy.0 [ 47.976763] PM: Adding info for No Bus:usbdev4.1_ep81 [ 47.977244] ACPI: PCI Interrupt 0000:00:1d.7[D] -> GSI 23 (level, low) -> IRQ 19 [ 47.977257] PCI: Setting latency timer of device 0000:00:1d.7 to 64 [ 47.977261] ehci_hcd 0000:00:1d.7: EHCI Host Controller [ 47.977287] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 5 [ 47.977320] ehci_hcd 0000:00:1d.7: debug port 1 [ 47.977327] PCI: cache line size of 128 is not supported by device 0000:00:1d.7 [ 47.977336] ehci_hcd 0000:00:1d.7: irq 19, io mem 0xf7fff800 [ 47.981204] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 [ 47.981225] PM: Adding info for usb:usb5 [ 47.981264] PM: Adding info for No Bus:usbdev5.1_ep00 [ 47.981280] usb usb5: configuration #1 chosen from 1 choice [ 47.981289] PM: Adding info for usb:5-0:1.0 [ 47.981308] hub 5-0:1.0: USB hub found [ 47.981315] hub 5-0:1.0: 8 ports detected [ 47.981741] usb 2-2: new low speed USB device using uhci_hcd and address 2 [ 48.084593] PM: Adding info for No Bus:usbdev5.1_ep81 [ 48.084698] ACPI: PCI Interrupt 0000:02:0a.2[C] -> GSI 20 (level, low) -> IRQ 20 [ 48.084713] ehci_hcd 0000:02:0a.2: EHCI Host Controller [ 48.084739] ehci_hcd 0000:02:0a.2: new USB bus registered, assigned bus number 6 [ 48.106523] ehci_hcd 0000:02:0a.2: irq 20, io mem 0xf7eff400 [ 48.106535] ehci_hcd 0000:02:0a.2: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 [ 48.106565] PM: Adding info for usb:usb6 [ 48.106622] PM: Adding info for No Bus:usbdev6.1_ep00 [ 48.106640] usb usb6: configuration #1 chosen from 1 choice [ 48.106650] PM: Adding info for usb:6-0:1.0 [ 48.106669] hub 6-0:1.0: USB hub found [ 48.106678] hub 6-0:1.0: 5 ports detected [ 48.208377] PM: Adding info for No Bus:usbdev6.1_ep81 [ 48.209502] sata_promise 0000:02:04.0: version 1.05 [ 48.209521] ACPI: PCI Interrupt 0000:02:04.0[A] -> GSI 23 (level, low) -> IRQ 19 [ 48.223390] ata1: SATA max UDMA/133 cmd 0xF8806200 ctl 0xF8806238 bmdma 0x0 irq 19 [ 48.223417] ata2: SATA max UDMA/133 cmd 0xF8806280 ctl 0xF88062B8 bmdma 0x0 irq 19 [ 48.223427] scsi0 : sata_promise [ 48.223442] PM: Adding info for No Bus:host0 [ 48.447962] usb 6-4: new high speed USB device using ehci_hcd and address 2 [ 48.526837] ata1: SATA link down (SStatus 0 SControl 0) [ 48.526857] scsi1 : sata_promise [ 48.526870] PM: Adding info for No Bus:host1 [ 48.569098] PM: Adding info for usb:6-4 [ 48.569143] PM: Adding info for No Bus:usbdev6.2_ep00 [ 48.569159] usb 6-4: configuration #1 chosen from 1 choice [ 48.569509] PM: Adding info for usb:6-4:1.0 [ 48.569535] hub 6-4:1.0: USB hub found [ 48.569841] hub 6-4:1.0: 4 ports detected [ 48.672639] PM: Adding info for No Bus:usbdev6.2_ep81 [ 49.037008] usb 2-2: new low speed USB device using uhci_hcd and address 3 [ 49.088955] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 49.093263] ata2.00: ATA-6, max UDMA/133, 390721968 sectors: LBA48 [ 49.097297] ata2.00: configured for UDMA/133 [ 49.097319] PM: Adding info for No Bus:target1:0:0 [ 49.097414] scsi 1:0:0:0: Direct-Access ATA ST3200822AS 3.01 PQ: 0 ANSI: 5 [ 49.097422] PM: Adding info for scsi:1:0:0:0 [ 49.097789] ACPI: PCI Interrupt 0000:02:03.0[A] -> GSI 20 (level, low) -> IRQ 20 [ 49.097812] PM: Adding info for ieee1394:fw-host0 [ 49.156639] SCSI device sda: 390721968 512-byte hdwr sectors (200050 MB) [ 49.156656] sda: Write Protect is off [ 49.156659] sda: Mode Sense: 00 3a 00 00 [ 49.156677] SCSI device sda: write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 49.156729] SCSI device sda: 390721968 512-byte hdwr sectors (200050 MB) [ 49.156740] sda: Write Protect is off [ 49.156742] sda: Mode Sense: 00 3a 00 00 [ 49.156759] SCSI device sda: write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 49.156762] sda:<6>ohci1394: fw-host0: OHCI-1394 1.0 (PCI): IRQ=[20] MMIO=[f7eff800-f7efffff] Max Packet=[2048] IR/IT contexts=[4/8] [ 49.164755] ACPI: PCI Interrupt 0000:02:05.0[A] -> GSI 22 (level, low) -> IRQ 21 [ 49.164788] skge 1.9 addr 0xf7ef8000 irq 21 chip Yukon-Lite rev 7 [ 49.165027] skge eth0: addr 00:0e:a6:af:73:98 [ 49.165121] ACPI: PCI Interrupt 0000:02:0a.0[A] -> GSI 22 (level, low) -> IRQ 21 [ 49.165130] ohci_hcd 0000:02:0a.0: OHCI Host Controller [ 49.165252] ohci_hcd 0000:02:0a.0: new USB bus registered, assigned bus number 7 [ 49.165263] ohci_hcd 0000:02:0a.0: irq 21, io mem 0xf7efc000 [ 49.169885] sda1 < sda5 > sda2 [ 49.178559] sd 1:0:0:0: Attached scsi disk sda [ 49.183476] sd 1:0:0:0: Attached scsi generic sg0 type 0 [ 49.211947] PM: Adding info for usb:2-2 [ 49.212225] PM: Adding info for No Bus:usbdev2.3_ep00 [ 49.212441] usb 2-2: configuration #1 chosen from 1 choice [ 49.214939] PM: Adding info for usb:2-2:1.0 [ 49.215148] PM: Adding info for No Bus:usbdev2.3_ep81 [ 49.258184] PM: Adding info for usb:usb7 [ 49.258337] PM: Adding info for No Bus:usbdev7.1_ep00 [ 49.259066] usb usb7: configuration #1 chosen from 1 choice [ 49.259081] PM: Adding info for usb:7-0:1.0 [ 49.259204] hub 7-0:1.0: USB hub found [ 49.259215] hub 7-0:1.0: 3 ports detected [ 49.360520] PM: Adding info for No Bus:usbdev7.1_ep81 [ 49.361494] ACPI: PCI Interrupt 0000:02:0a.1[B] -> GSI 23 (level, low) -> IRQ 19 [ 49.361519] ohci_hcd 0000:02:0a.1: OHCI Host Controller [ 49.361633] ohci_hcd 0000:02:0a.1: new USB bus registered, assigned bus number 8 [ 49.361647] ohci_hcd 0000:02:0a.1: irq 19, io mem 0xf7efd000 [ 49.397721] usb 6-4.3: new high speed USB device using ehci_hcd and address 4 [ 49.443413] PM: Adding info for usb:usb8 [ 49.443571] PM: Adding info for No Bus:usbdev8.1_ep00 [ 49.444316] usb usb8: configuration #1 chosen from 1 choice [ 49.444329] PM: Adding info for usb:8-0:1.0 [ 49.444460] hub 8-0:1.0: USB hub found [ 49.444470] hub 8-0:1.0: 2 ports detected [ 49.477729] PM: Adding info for usb:6-4.3 [ 49.477960] PM: Adding info for No Bus:usbdev6.4_ep00 [ 49.478155] usb 6-4.3: configuration #1 chosen from 1 choice [ 49.478354] PM: Adding info for usb:6-4.3:1.0 [ 49.478519] PM: Adding info for No Bus:usbdev6.4_ep01 [ 49.478698] PM: Adding info for No Bus:usbdev6.4_ep82 [ 49.546217] PM: Adding info for No Bus:usbdev8.1_ep81 [ 49.549893] ata_piix 0000:00:1f.1: version 2.00ac7 [ 49.549906] PCI: Enabling device 0000:00:1f.1 (0005 -> 0007) [ 49.549913] ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 18 (level, low) -> IRQ 18 [ 49.549931] PCI: Setting latency timer of device 0000:00:1f.1 to 64 [ 49.549961] ata3: PATA max UDMA/100 cmd 0xEFE0 ctl 0xEFAE bmdma 0xEF90 irq 18 [ 49.549986] ata4: PATA max UDMA/100 cmd 0xEFA0 ctl 0xEFAA bmdma 0xEF98 irq 18 [ 49.550001] scsi2 : ata_piix [ 49.550011] PM: Adding info for No Bus:host2 [ 49.652334] usb 6-4.4: new high speed USB device using ehci_hcd and address 5 [ 49.701988] scsi3 : ata_piix [ 49.702002] PM: Adding info for No Bus:host3 [ 49.730347] PM: Adding info for usb:6-4.4 [ 49.730568] PM: Adding info for No Bus:usbdev6.5_ep00 [ 49.730758] usb 6-4.4: configuration #1 chosen from 1 choice [ 49.730972] PM: Adding info for usb:6-4.4:1.0 [ 49.731129] hub 6-4.4:1.0: USB hub found [ 49.731591] hub 6-4.4:1.0: 4 ports detected [ 49.834765] PM: Adding info for No Bus:usbdev6.5_ep81 [ 49.993703] usbcore: registered new interface driver libusual [ 49.997769] Initializing USB Mass Storage driver... [ 49.998634] usbcore: registered new interface driver hiddev [ 50.013827] input: Microsoft Microsoft IntelliMouse� Optical as /class/input/input1 [ 50.013933] input: USB HID v1.00 Mouse [Microsoft Microsoft IntelliMouse� Optical] on usb-0000:00:1d.1-2 [ 50.186471] ata4.00: ATAPI, max UDMA/33 [ 50.256034] usb 7-3: new full speed USB device using ohci_hcd and address 2 [ 50.342216] ata4.01: ATAPI, max UDMA/33 [ 50.421862] PM: Adding info for ieee1394:00e01800006fc903 [ 50.422223] ieee1394: Host added: ID:BUS[0-00:1023] GUID[00e01800006fc903] [ 50.422256] PM: Adding info for ieee1394:00e01800006fc903-0 [ 50.441899] PM: Adding info for usb:7-3 [ 50.442148] PM: Adding info for No Bus:usbdev7.2_ep00 [ 50.442336] usb 7-3: configuration #1 chosen from 1 choice [ 50.444895] PM: Adding info for usb:7-3:1.0 [ 50.445090] PM: Adding info for usb:7-3:1.1 [ 50.445279] PM: Adding info for usb:7-3:1.2 [ 50.445479] PM: Adding info for usb:7-3:1.3 [ 50.445707] PM: Adding info for No Bus:usbdev7.2_ep83 [ 50.446137] scsi4 : SCSI emulation for USB Mass Storage devices [ 50.446144] PM: Adding info for No Bus:host4 [ 50.446354] usbcore: registered new interface driver usb-storage [ 50.446359] USB Mass Storage support registered. [ 50.446429] usb-storage: device found at 4 [ 50.446431] usb-storage: waiting for device to settle before scanning [ 50.479000] input: C-Media USB Headphone Set as /class/input/input2 [ 50.479015] input: USB HID v1.00 Device [C-Media USB Headphone Set ] on usb-0000:02:0a.0-3 [ 50.479034] usbcore: registered new interface driver usbhid [ 50.479038] drivers/usb/input/hid-core.c: v2.6:USB HID core driver [ 50.516947] ata4.00: configured for UDMA/33 [ 50.674679] ata4.01: configured for UDMA/33 [ 50.674705] PM: Adding info for No Bus:target3:0:0 [ 50.679885] scsi 3:0:0:0: CD-ROM HL-DT-ST DVDRAM GSA-4082B A204 PQ: 0 ANSI: 5 [ 50.679892] PM: Adding info for scsi:3:0:0:0 [ 50.680256] scsi 3:0:0:0: Attached scsi generic sg1 type 5 [ 50.680273] PM: Adding info for No Bus:target3:0:1 [ 50.684683] scsi 3:0:1:0: CD-ROM LITE-ON LTR-40125W WS0B PQ: 0 ANSI: 5 [ 50.684690] PM: Adding info for scsi:3:0:1:0 [ 50.684978] scsi 3:0:1:0: Attached scsi generic sg2 type 5 [ 50.685003] ata_piix 0000:00:1f.2: MAP [ P0 -- P1 -- ] [ 50.685019] ACPI: PCI Interrupt 0000:00:1f.2[A] -> GSI 18 (level, low) -> IRQ 18 [ 50.685034] PCI: Setting latency timer of device 0000:00:1f.2 to 64 [ 50.685063] ata5: SATA max UDMA/133 cmd 0xEF88 ctl 0xEF86 bmdma 0xEE60 irq 18 [ 50.685088] ata6: SATA max UDMA/133 cmd 0xEF68 ctl 0xEF82 bmdma 0xEE68 irq 18 [ 50.685095] scsi5 : ata_piix [ 50.685101] PM: Adding info for No Bus:host5 [ 50.840287] ata5.00: ATA-7, max UDMA7, 488397168 sectors: LBA48 NCQ (depth 0/32) [ 50.840291] ata5.00: ata5: dev 0 multi count 16 [ 50.874326] ata5.00: configured for UDMA/133 [ 50.874334] scsi6 : ata_piix [ 50.874344] PM: Adding info for No Bus:host6 [ 51.029978] ata6.00: ATA-7, max UDMA7, 488397168 sectors: LBA48 NCQ (depth 0/32) [ 51.029982] ata6.00: ata6: dev 0 multi count 16 [ 51.049000] ata6.00: configured for UDMA/133 [ 51.049014] PM: Adding info for No Bus:target5:0:0 [ 51.049098] scsi 5:0:0:0: Direct-Access ATA SAMSUNG SP2504C VT10 PQ: 0 ANSI: 5 [ 51.049106] PM: Adding info for scsi:5:0:0:0 [ 51.049363] SCSI device sdb: 488397168 512-byte hdwr sectors (250059 MB) [ 51.049375] sdb: Write Protect is off [ 51.049378] sdb: Mode Sense: 00 3a 00 00 [ 51.049395] SCSI device sdb: write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 51.049439] SCSI device sdb: 488397168 512-byte hdwr sectors (250059 MB) [ 51.049450] sdb: Write Protect is off [ 51.049452] sdb: Mode Sense: 00 3a 00 00 [ 51.049469] SCSI device sdb: write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 51.049472] sdb: sdb1 sdb2 sdb3 [ 51.075425] sd 5:0:0:0: Attached scsi disk sdb [ 51.075641] sd 5:0:0:0: Attached scsi generic sg3 type 0 [ 51.075660] PM: Adding info for No Bus:target6:0:0 [ 51.075732] scsi 6:0:0:0: Direct-Access ATA SAMSUNG SP2504C VT10 PQ: 0 ANSI: 5 [ 51.075742] PM: Adding info for scsi:6:0:0:0 [ 51.075961] SCSI device sdc: 488397168 512-byte hdwr sectors (250059 MB) [ 51.075972] sdc: Write Protect is off [ 51.075975] sdc: Mode Sense: 00 3a 00 00 [ 51.075991] SCSI device sdc: write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 51.076029] SCSI device sdc: 488397168 512-byte hdwr sectors (250059 MB) [ 51.076039] sdc: Write Protect is off [ 51.076042] sdc: Mode Sense: 00 3a 00 00 [ 51.076058] SCSI device sdc: write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 51.076061] sdc: sdc1 sdc2 [ 51.113486] sd 6:0:0:0: Attached scsi disk sdc [ 51.113700] sd 6:0:0:0: Attached scsi generic sg4 type 0 [ 51.195830] sr0: scsi3-mmc drive: 32x/32x writer dvd-ram cd/rw xa/form2 cdda tray [ 51.195836] Uniform CD-ROM driver Revision: 3.20 [ 51.196025] sr 3:0:0:0: Attached scsi CD-ROM sr0 [ 51.273444] sr1: scsi3-mmc drive: 103x/48x writer cd/rw xa/form2 cdda tray [ 51.273661] sr 3:0:1:0: Attached scsi CD-ROM sr1 [ 51.489867] Attempting manual resume [ 51.489871] swsusp: Resume From Partition 8:18 [ 51.489873] PM: Checking swsusp image. [ 51.490063] PM: Resume from disk failed. [ 51.542244] kjournald starting. Commit interval 5 seconds [ 51.542256] EXT3-fs: mounted filesystem with writeback data mode. [ 55.439507] usb-storage: device scan complete [ 55.439568] PM: Adding info for No Bus:target4:0:0 [ 55.440114] scsi 4:0:0:0: Direct-Access Multi Flash Reader 1.00 PQ: 0 ANSI: 0 [ 55.440149] PM: Adding info for No Bus:target4:0:1 [ 55.440177] PM: Removing info for No Bus:target4:0:1 [ 55.440191] PM: Adding info for No Bus:target4:0:2 [ 55.440214] PM: Removing info for No Bus:target4:0:2 [ 55.440225] PM: Adding info for No Bus:target4:0:3 [ 55.440247] PM: Removing info for No Bus:target4:0:3 [ 55.440258] PM: Adding info for No Bus:target4:0:4 [ 55.440281] PM: Removing info for No Bus:target4:0:4 [ 55.440291] PM: Adding info for No Bus:target4:0:5 [ 55.440314] PM: Removing info for No Bus:target4:0:5 [ 55.440324] PM: Adding info for No Bus:target4:0:6 [ 55.440347] PM: Removing info for No Bus:target4:0:6 [ 55.440500] PM: Adding info for No Bus:target4:0:7 [ 55.440525] PM: Removing info for No Bus:target4:0:7 [ 55.440536] PM: Adding info for scsi:4:0:0:0 [ 55.441505] sd 4:0:0:0: Attached scsi removable disk sdd [ 55.441578] sd 4:0:0:0: Attached scsi generic sg5 type 0 [ 56.471357] PM: Adding info for No Bus:vcs2 [ 56.471382] PM: Adding info for No Bus:vcsa2 [ 56.472303] PM: Removing info for No Bus:vcs2 [ 56.472322] PM: Removing info for No Bus:vcsa2 [ 56.472439] PM: Adding info for No Bus:vcs3 [ 56.472452] PM: Adding info for No Bus:vcsa3 [ 56.473347] PM: Removing info for No Bus:vcs3 [ 56.473363] PM: Removing info for No Bus:vcsa3 [ 56.473474] PM: Adding info for No Bus:vcs4 [ 56.473487] PM: Adding info for No Bus:vcsa4 [ 56.474381] PM: Removing info for No Bus:vcs4 [ 56.474397] PM: Removing info for No Bus:vcsa4 [ 56.474508] PM: Adding info for No Bus:vcs5 [ 56.474521] PM: Adding info for No Bus:vcsa5 [ 56.475405] PM: Removing info for No Bus:vcs5 [ 56.475421] PM: Removing info for No Bus:vcsa5 [ 56.475530] PM: Adding info for No Bus:vcs6 [ 56.475543] PM: Adding info for No Bus:vcsa6 [ 56.476438] PM: Removing info for No Bus:vcs6 [ 56.476454] PM: Removing info for No Bus:vcsa6 [ 57.193058] skge eth0: enabling interface [ 58.932291] skge eth0: Link is up at 100 Mbps, full duplex, flow control both [ 59.576103] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 59.577840] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 60.126878] Linux video capture interface: v2.00 [ 60.183802] intel_rng: FWH not detected [ 60.293582] iTCO_vendor_support: vendor-support=0 [ 60.297363] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.01 (11-Nov-2006) [ 60.298635] PM: Adding info for platform:iTCO_wdt [ 60.299954] iTCO_wdt: Found a ICH5 or ICH5R TCO device (Version=1, TCOBASE=0x0860) [ 60.299976] PM: Adding info for No Bus:watchdog [ 60.301232] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0) [ 60.318536] saa7130/34: v4l2 driver version 0.2.14 loaded [ 60.319807] ACPI: PCI Interrupt 0000:02:0c.0[A] -> GSI 20 (level, low) -> IRQ 20 [ 60.319818] saa7134[0]: found at 0000:02:0c.0, rev: 1, irq: 20, latency: 64, mmio: 0xf7eff000 [ 60.319824] saa7134[0]: subsystem: 1461:a70b, board: AverMedia M156 / Medion 2819 [card=22,autodetected] [ 60.319834] saa7134[0]: board init: gpio is 7f8 [ 60.321111] input: saa7134 IR (AverMedia M156 / Me as /class/input/input3 [ 60.423596] PM: Adding info for No Bus:i2c-0 [ 60.448536] saa7134[0]: i2c eeprom 00: 61 14 0b a7 ff ff ff ff ff ff ff ff ff ff ff ff [ 60.448546] saa7134[0]: i2c eeprom 10: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 60.448555] saa7134[0]: i2c eeprom 20: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 60.448563] saa7134[0]: i2c eeprom 30: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 60.448571] saa7134[0]: i2c eeprom 40: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 60.448578] saa7134[0]: i2c eeprom 50: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 60.448586] saa7134[0]: i2c eeprom 60: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 60.448594] saa7134[0]: i2c eeprom 70: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 60.489491] tuner 0-0043: chip found @ 0x86 (saa7134[0]) [ 60.489505] PM: Adding info for i2c:0-0043 [ 60.490920] tda9887 0-0043: tda988[5/6/7] found @ 0x43 (tuner) [ 60.494465] tuner 0-0061: chip found @ 0xc2 (saa7134[0]) [ 60.494478] PM: Adding info for i2c:0-0061 [ 60.495832] tuner 0-0061: type set to 38 (Philips PAL/SECAM multi (FM1216ME MK3)) [ 60.495837] tuner 0-0061: type set to 38 (Philips PAL/SECAM multi (FM1216ME MK3)) [ 60.565351] saa7134[0]: registered device video0 [v4l2] [ 60.566734] saa7134[0]: registered device vbi0 [ 60.567932] saa7134[0]: registered device radio0 [ 60.712781] PM: Adding info for No Bus:timer [ 60.726234] PM: Adding info for No Bus:seq [ 60.771985] PM: Adding info for No Bus:sequencer [ 60.773274] PM: Adding info for No Bus:sequencer2 [ 60.906405] saa7134 ALSA driver for DMA sound loaded [ 60.906433] saa7134[0]/alsa: saa7134[0] at 0xf7eff000 irq 20 registered as card -2 [ 60.906453] PM: Adding info for No Bus:pcmC1D0c [ 60.907726] PM: Adding info for No Bus:dsp1 [ 60.908992] PM: Adding info for No Bus:audio1 [ 60.910230] PM: Adding info for No Bus:controlC1 [ 60.911481] PM: Adding info for No Bus:mixer1 [ 61.121204] ACPI: PCI Interrupt 0000:00:1f.5[B] -> GSI 17 (level, low) -> IRQ 22 [ 61.121232] PCI: Setting latency timer of device 0000:00:1f.5 to 64 [ 61.152220] input: PC Speaker as /class/input/input4 [ 61.388713] parport: PnPBIOS parport detected. [ 61.388810] parport0: PC-style at 0x378 (0x778), irq 7, dma 3 [PCSPP,TRISTATE,COMPAT,EPP,ECP,DMA] [ 61.442934] intel8x0_measure_ac97_clock: measured 51089 usecs [ 61.442939] intel8x0: clocking to 48000 [ 61.442972] PM: Adding info for No Bus:pcmC0D4p [ 61.444431] PM: Adding info for No Bus:pcmC0D3c [ 61.445707] PM: Adding info for No Bus:pcmC0D2c [ 61.446960] PM: Adding info for No Bus:pcmC0D1c [ 61.448216] PM: Adding info for No Bus:adsp [ 61.449453] PM: Adding info for No Bus:pcmC0D0p [ 61.450700] PM: Adding info for No Bus:pcmC0D0c [ 61.451940] PM: Adding info for No Bus:dsp [ 61.453187] PM: Adding info for No Bus:audio [ 61.454412] PM: Adding info for ac97:0-0:ALC850 [ 61.455638] PM: Adding info for No Bus:controlC0 [ 61.456867] PM: Adding info for No Bus:mixer [ 62.165203] PM: Adding info for No Bus:usbdev7.2_ep01 [ 62.200132] PM: Removing info for No Bus:usbdev7.2_ep01 [ 62.203143] PM: Adding info for No Bus:usbdev7.2_ep82 [ 62.229340] Linux agpgart interface v0.101 (c) Dave Jones [ 62.233678] agpgart: Detected an Intel 865 Chipset. [ 62.244673] PM: Adding info for No Bus:agpgart [ 62.246219] agpgart: AGP aperture is 64M @ 0xf8000000 [ 62.261044] PM: Removing info for No Bus:usbdev7.2_ep82 [ 62.478725] PM: Adding info for No Bus:pcmC2D0p [ 62.480737] PM: Adding info for No Bus:pcmC2D0c [ 62.482692] PM: Adding info for No Bus:dsp2 [ 62.484624] PM: Adding info for No Bus:audio2 [ 62.484974] PM: Adding info for No Bus:controlC2 [ 62.485307] PM: Adding info for No Bus:mixer2 [ 62.485783] usbcore: registered new interface driver snd-usb-audio [ 62.616351] lp0: using parport0 (interrupt-driven). [ 62.688598] fuse init (API version 7.8) [ 62.688641] PM: Adding info for No Bus:fuse [ 62.745314] Adding 248996k swap on /dev/disk/by-uuid/f63c1c0d-7c26-4864-9e62-5fc8a366c70a. Priority:-1 extents:1 across:248996k [ 62.766485] Adding 329324k swap on /dev/disk/by-uuid/8019125d-bcb0-497e-bbfb-e52b685fe707. Priority:-2 extents:1 across:329324k [ 62.991790] EXT3 FS on dm-0, internal journal [ 63.561472] kjournald starting. Commit interval 5 seconds [ 63.561861] EXT3 FS on sdb2, internal journal [ 63.561866] EXT3-fs: mounted filesystem with ordered data mode. [ 63.569782] kjournald starting. Commit interval 5 seconds [ 63.570132] EXT3 FS on dm-1, internal journal [ 63.570136] EXT3-fs: mounted filesystem with writeback data mode. [ 64.416081] PM: Adding info for No Bus:vcs4 [ 64.417847] PM: Adding info for No Bus:vcsa4 [ 64.420343] PM: Adding info for No Bus:vcs5 [ 64.422041] PM: Adding info for No Bus:vcsa5 [ 64.424648] PM: Adding info for No Bus:vcs2 [ 64.426379] PM: Adding info for No Bus:vcsa2 [ 64.428871] PM: Adding info for No Bus:vcs3 [ 64.430587] PM: Adding info for No Bus:vcsa3 [ 64.438830] PM: Adding info for No Bus:vcs6 [ 64.440588] PM: Adding info for No Bus:vcsa6 [ 64.660388] toshiba_acpi: Unknown parameter `hotkeys_over_acpi' [ 64.703832] Using specific hotkey driver [ 64.769559] input: Power Button (FF) as /class/input/input5 [ 64.769770] ACPI: Power Button (FF) [PWRF] [ 64.776551] input: Power Button (CM) as /class/input/input6 [ 64.776757] ACPI: Power Button (CM) [PWRB] [ 64.858446] No dock devices found. [ 64.879546] ibm_acpi: ec object not found [ 72.068676] Capability LSM initialized [ 72.502217] PM: Adding info for No Bus:parport0 [ 72.505240] ppdev: user-space parallel port driver [ 73.440409] apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac) [ 73.440415] apm: overridden by ACPI. [ 74.776585] Bluetooth: Core ver 2.11 [ 74.776965] PM: Adding info for platform:bluetooth [ 74.777619] NET: Registered protocol family 31 [ 74.777623] Bluetooth: HCI device and connection manager initialized [ 74.777626] Bluetooth: HCI socket layer initialized [ 74.839352] Bluetooth: L2CAP ver 2.8 [ 74.839357] Bluetooth: L2CAP socket layer initialized [ 75.000266] Bluetooth: RFCOMM socket layer initialized [ 75.000870] Bluetooth: RFCOMM TTY layer initialized [ 75.000874] Bluetooth: RFCOMM ver 1.8 [ 76.643929] PM: Adding info for No Bus:vcs7 [ 76.646892] PM: Adding info for No Bus:vcsa7 [ 78.182896] PM: Removing info for No Bus:vcs7 [ 78.185819] PM: Removing info for No Bus:vcsa7 [ 298.217175] PM: Adding info for No Bus:vcs7 [ 298.220190] PM: Adding info for No Bus:vcsa7 [ 993.552501] PM: Removing info for No Bus:vcs7 [ 993.553365] PM: Removing info for No Bus:vcsa7 [ 1020.206206] nvidia: module license 'NVIDIA' taints kernel. [ 1020.468161] ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 16 (level, low) -> IRQ 16 [ 1020.469138] NVRM: loading NVIDIA UNIX x86 Kernel Module 1.0-9755 Mon Feb 26 23:21:15 PST 2007 [ 1073.089657] PM: Adding info for No Bus:vcs7 [ 1073.092376] PM: Adding info for No Bus:vcsa7 [ 1073.438803] NVRM: loading NVIDIA UNIX x86 Kernel Module 1.0-9755 Mon Feb 26 23:21:15 PST 2007 [ 1073.767135] agpgart: Found an AGP 3.0 compliant device at 0000:00:00.0. [ 1073.767401] agpgart: Putting AGP V3 device at 0000:00:00.0 into 8x mode [ 1073.767627] agpgart: Putting AGP V3 device at 0000:01:00.0 into 8x mode [ 1074.426941] PM: Adding info for No Bus:i2c-1 [ 1074.430149] PM: Adding info for No Bus:i2c-2 [ 1074.432870] PM: Adding info for No Bus:i2c-3 [ 2826.804720] PM: Adding info for No Bus:usbdev7.2_ep01 [ 2826.820672] PM: Removing info for No Bus:usbdev7.2_ep01 [ 2826.823685] PM: Adding info for No Bus:usbdev7.2_ep01 [ 2826.857621] PM: Removing info for No Bus:usbdev7.2_ep01 [ 2828.257524] PM: Adding info for No Bus:usbdev7.2_ep01 [ 2854.839208] PM: Removing info for No Bus:usbdev7.2_ep01