System ----------------------- K3b Version: 0.12 KDE Version: 3.4.2 QT Version: 3.3.4 Kernel: 2.6.12-12mdk Devices ----------------------- ATAPI CD-RW CW5205 180C (/dev/hdc, ) at /mnt/cdrom [CD-R; CD-RW; CD-ROM] [CD-ROM; CD-R; CD-RW] [SAO; TAO; RAW; SAO/R96P; SAO/R96R; RAW/R16; RAW/R96P; RAW/R96R] PIONEER DVD-ROM DVD-116 1.21 (/dev/hdd, ) at /mnt/cdrom2 [CD-ROM; DVD-ROM] [DVD-ROM; CD-ROM] [None] Used versions ----------------------- cdrecord: 2.1.1a03 cdrecord ----------------------- /usr/bin/cdrecord: Cannot allocate memory. WARNING: Cannot do mlockall(2). /usr/bin/cdrecord: WARNING: This causes a high risk for buffer underruns. /usr/bin/cdrecord: Operation not permitted. WARNING: Cannot set RR-scheduler /usr/bin/cdrecord: Permission denied. WARNING: Cannot set priority using setpriority(). /usr/bin/cdrecord: WARNING: This causes a high risk for buffer underruns. scsidev: '/dev/hdc' devname: '/dev/hdc' scsibus: -2 target: -2 lun: -2 Warning: Open by 'devname' is unintentional and not supported. Linux sg driver version: 3.5.27 SCSI buffer size: 64512 Cdrecord-Clone 2.01.01a03-dvd (i686-pc-linux-gnu) Copyright (C) 1995-2005 Jörg Schilling Note: This version is an unofficial (modified) version with DVD support Note: and therefore may have bugs that are not present in the original. Note: Please send bug reports or support requests to warly at mandriva.com. Note: The author of cdrecord should not be bothered with problems in this version. TOC Type: 0 = CD-DA Using libscg version 'schily-0.8'. Driveropts: 'burnfree' atapi: 1 Device type : Removable CD-ROM Version : 0 Response Format: 1 Vendor_info : 'ATAPI ' Identifikation : 'CD-RW CW5205 ' Revision : '180C' Device seems to be: Generic mmc CD-RW. Current: 0x000A Profile: 0x0008 Profile: 0x0009 Profile: 0x000A (current) Using generic SCSI-3/mmc CD-R/CD-RW driver (mmc_cdr). Driver flags : MMC-3 SWABAUDIO BURNFREE Supported modes: TAO PACKET SAO SAO/R96P SAO/R96R RAW/R16 RAW/R96P RAW/R96R Drive buf size : 1658880 = 1620 KB Drive DMA Speed: 21721 kB/s 123x CD 15x DVD FIFO size : 4194304 = 4096 KB pregap1: -1 Track 01: audio 48 MB (04:48.00) no preemp swab copy Track 02: audio 50 MB (04:57.66) no preemp swab copy Track 03: audio 55 MB (05:28.78) no preemp swab copy Track 04: audio 49 MB (04:55.61) no preemp swab copy Track 05: audio 52 MB (05:11.88) no preemp swab copy Track 06: audio 46 MB (04:34.78) no preemp swab copy Track 07: audio 48 MB (04:49.08) no preemp swab copy Track 08: audio 48 MB (04:45.92) no preemp swab copy Track 09: audio 55 MB (05:32.73) no preemp swab copy Track 10: audio 44 MB (04:25.66) no preemp swab copy Track 11: audio 40 MB (03:59.57) no preemp swab copy Track 12: audio 50 MB (05:02.48) no preemp swab copy Track 13: audio 42 MB (04:11.28) no preemp swab copy Total size: 633 MB (62:43.46) = 282260 sectors Lout start: 633 MB (62:45/35) = 282260 sectors Current Secsize: 2048 ATIP info from disk: Indicated writing power: 5 Is not unrestricted Is not erasable Disk sub type: Medium Type A, high Beta category (A+) (3) /usr/bin/cdrecord: Operation not permitted. WARNING: Cannot set RR-scheduler /usr/bin/cdrecord: Permission denied. WARNING: Cannot set priority using setpriority(). /usr/bin/cdrecord: WARNING: This causes a high risk for buffer underruns. ATIP start of lead in: -11634 (97:26/66) ATIP start of lead out: 359846 (79:59/71) Disk type: Short strategy type (Phthalocyanine or similar) Manuf. index: 3 Manufacturer: CMC Magnetics Corporation Blocks total: 359846 Blocks current: 359846 Blocks remaining: 77586 Speed set to 704 KB/s Starting to write CD/DVD at speed 4.0 in real SAO mode for single session. Last chance to quit, starting real write in 2 seconds. 1 seconds. 0 seconds. Operation starts. Waiting for reader process to fill input buffer ... input buffer ready. trackno=0 BURN-Free is OFF. Turning BURN-Free on Performing OPC... Sending CUE sheet... /usr/bin/cdrecord: Success. write_g1: scsi sendcmd: no error CDB: 2A 00 FF FF FF 6A 00 00 1B 00 status: 0x2 (CHECK CONDITION) Sense Bytes: 70 00 03 00 00 00 00 0A 00 00 00 00 73 03 00 00 Sense Key: 0x3 Medium Error, Segment 0 Sense Code: 0x73 Qual 0x03 (power calibration area error) Fru 0x0 Sense flags: Blk 0 (not valid) resid: 63504 cmd finished after 1.072s timeout 200s Writing pregap for track 1 at -150 write track pad data: error after 0 bytes BFree: 1860 K BSize: 1860 K Starting new track at sector: 0 Track 01: 0 of 48 MB written. /usr/bin/cdrecord: Success. write_g1: scsi sendcmd: no error CDB: 2A 00 00 00 00 00 00 00 1B 00 status: 0x2 (CHECK CONDITION) Sense Bytes: 70 00 03 00 00 00 00 0A 00 00 00 00 73 03 00 00 Sense Key: 0x3 Medium Error, Segment 0 Sense Code: 0x73 Qual 0x03 (power calibration area error) Fru 0x0 Sense flags: Blk 0 (not valid) resid: 63504 cmd finished after 0.081s timeout 200s /usr/bin/cdrecord: A write error occured. /usr/bin/cdrecord: Please properly read the error message above. write track data: error after 0 bytes Writing time: 6.257s Average write speed 608.9x. Fixating... Fixating time: 0.004s /usr/bin/cdrecord: fifo had 64 puts and 1 gets. /usr/bin/cdrecord: fifo was 0 times empty and 0 times full, min fill was 100%. cdrecord command: ----------------------- /usr/bin/cdrecord -v gracetime=2 dev=/dev/hdc speed=4 -dao driveropts=burnfree -eject -useinfo -audio -shorttrack /home/joshua/tmp/kde-joshua/k3b_audio_0_01.inf /home/joshua/tmp/kde-joshua/k3b_audio_0_02.inf /home/joshua/tmp/kde-joshua/k3b_audio_0_03.inf /home/joshua/tmp/kde-joshua/k3b_audio_0_04.inf /home/joshua/tmp/kde-joshua/k3b_audio_0_05.inf /home/joshua/tmp/kde-joshua/k3b_audio_0_06.inf /home/joshua/tmp/kde-joshua/k3b_audio_0_07.inf /home/joshua/tmp/kde-joshua/k3b_audio_0_08.inf /home/joshua/tmp/kde-joshua/k3b_audio_0_09.inf /home/joshua/tmp/kde-joshua/k3b_audio_0_10.inf /home/joshua/tmp/kde-joshua/k3b_audio_0_11.inf /home/joshua/tmp/kde-joshua/k3b_audio_0_12.inf /home/joshua/tmp/kde-joshua/k3b_audio_0_13.inf