<5>Linux version 2.6.18-at0 (hcegtvedt@hcegtvedt) (gcc version 4.0.2-atmel.0.99.2) #1 Fri Jan 19 14:45:28 CET 2007 <4>CPU: AP7000 [01] revision 0 (AVR32B revision 1) <4>CPU: MMU configuration: Shared TLB <4>CPU: features: java perfctr ocd <4>CPU: Running at 130.000 MHz <4>Physical memory: <4> 10000000 - 12000000 <4>Reserved memory: <4>Node 0: bdata = 9017ea60, bdata->node_bootmem_map = 90189000 <4>Node 0: Kernel image 10000000 - 10188fe0 <4>Exception vectors start at 9000e000 <4>CPU: Paging enabled <4>Node 0: start_pfn = 0x10000, low = 0x12000 <7>On node 0 totalpages: 8192 <7> DMA zone: 8192 pages, LIFO batch:1 <4>Node 0: mem_map starts at 9018b000 <4>Built 1 zonelists. Total pages: 8192 <5>Kernel command line: console=ttyS0 root=/dev/mtdblock1 rootfstype=jffs2 <4>PID hash table entries: 256 (order: 8, 1024 bytes) <4>Before time_init: count=21b30e75, compare=00000000 <4>Cycle counter: mult=504123, shift=16 <4>After time_init: count=00000021, compare=0007ef40 <4>Dentry cache hash table entries: 4096 (order: 2, 16384 bytes) <4>Inode-cache hash table entries: 2048 (order: 1, 8192 bytes) <4>Memory: 30888k/30908k available (1048k kernel code, 1860k reserved, 212k data, 56k init) <4>Calibrating delay using timer specific routine.. 260.38 BogoMIPS (lpj=520773) <4>Mount-cache hash table entries: 512 <6>NET: Registered protocol family 16 <4>pio: invalid pin 128 <4>Stack: (0x901ebf40 to 0x901ec000) <4>bf40: 900106fa 901ebf54 00000000 00000000 00000000 90002966 901ebf68 00000000 <4>bf60: 00000000 00000000 90002fd6 901ebf8c 00000000 9000ba44 00000000 00000000 <4>bf80: 90017adc 9000e5dc 00000000 900034f8 901ebfa0 9000ba7c 00000000 00000000 <4>bfa0: 9000e63a 901ebfdc 9000b87c 9000d400 00000000 00000000 00400000 90011478 <4>bfc0: 90011478 901ec000 00000000 00000000 00000000 00000000 00000000 90017adc <4>bfe0: 00000000 00000000 00000000 00000000 00000000 90017adc 9000e5dc 00000000 <4>Call trace: <4> [<900106e8>] show_stack+0x3c/0x44 <4> [<900106fa>] dump_stack+0xa/0xc <4> [<90002966>] at32_select_gpio+0xba/0xc4 <4> [<90002fd6>] at32_add_device_mmci+0x62/0x8c <4> [<900034f8>] atngw_init+0x4c/0x60 <4> [<9000e63a>] init+0x5e/0x1c0 <4> [<90017adc>] do_exit+0x0/0x598 <4> <4> <6>pdc pdc.0: Atmel Peripheral DMA Controller enabled <4>EIM: External Interrupt Module at 0xfff00000, IRQ 19 <4>EIM: Handling 4 external IRQs, starting with IRQ 64 <6>smc smc.0: Atmel Static Memory Controller at 0xfff03400 <6>pio0: Atmel Port Multiplexer at 0xffe02800 (irq 13) <6>pio0: Handling 32 external IRQs, starting with IRQ 96 <6>pio1: Atmel Port Multiplexer at 0xffe02c00 (irq 14) <6>pio1: Handling 32 external IRQs, starting with IRQ 128 <6>pio2: Atmel Port Multiplexer at 0xffe03000 (irq 15) <6>pio2: Handling 32 external IRQs, starting with IRQ 160 <6>pio3: Atmel Port Multiplexer at 0xffe03400 (irq 16) <6>pio3: Handling 32 external IRQs, starting with IRQ 192 <6>dmac0: DesignWare DMA controller at 0xff200000 irq 2 <6>NET: Registered protocol family 2 <4>IP route cache hash table entries: 256 (order: -2, 1024 bytes) <4>TCP established hash table entries: 1024 (order: 0, 4096 bytes) <4>TCP bind hash table entries: 512 (order: -1, 2048 bytes) <6>TCP: Hash tables configured (established 1024 bind 512) <6>TCP reno registered <7>smc cs0: setup/00030001 pulse/06030504 cycle/00080008 mode/00001103 <6>JFFS2 version 2.2. (NAND) (C) 2001-2006 Red Hat, Inc. <6>io scheduler noop registered <6>io scheduler cfq registered (default) <6>Serial: Atmel USART3 driver <6>usart.1: ttyS0 at MMIO 0xffe01000 (irq = 7) is a USART3 <6>loop: loaded (max 8 devices) <6>eth0: Atmel MACB at 0xfff01800 irq 25 (00:04:25:1c:50:1e) <6>eth1: Atmel MACB at 0xfff01c00 irq 26 (00:04:25:1c:50:1f) <5>physmap platform flash device: 00800000 at 00000000 <6>physmap-flash.0: Found 1 x16 devices at 0x0 in 16-bit bank <4> Amd/Fujitsu Extended Query Table at 0x0041 <5>number of CFI chips: 1 <5>cfi_cmdset_0002: Disabling erase-suspend-program due to code brokenness. <5>cmdlinepart partition parsing not available <5>RedBoot partition parsing not available <5>Using physmap partition information <5>Creating 3 MTD partitions on "physmap-flash.0": <5>0x00000000-0x00020000 : "u-boot" <5>0x00020000-0x007f0000 : "root" <5>0x007f0000-0x00800000 : "env" <6>atmel_spi atmel_spi.0: Atmel SPI Controller at 0xffe00000 (irq 3) <6>mtd_dataflash spi0.0: AT45DB642x (8448 KBytes) <4>ip_conntrack version 2.4 (256 buckets, 2048 max) - 204 bytes per conntrack <4>ip_tables: (C) 2000-2006 Netfilter Core Team <6>TCP bic registered <6>NET: Registered protocol family 1 <6>NET: Registered protocol family 17 <6>Time: avr32 clocksource has been installed. <4>VFS: Mounted root (jffs2 filesystem). <6>Freeing init memory: 56K (90000000 - 9000e000) <4>: no WP pin available (-19) <6>mmc0: Atmel MCI controller at 0xfff02400 irq 28 <6>JFFS2 write-buffering enabled buffer (1056) erasesize (8448) <6>eth0: link down <6>eth0: link up, 100Mbps, full-duplex, lpa 0x41E1 <6>eth1: link down <4>atmel_spi atmel_spi.0: fifo overrun (176/178 remaining) <3>JFFS2 error: (183) jffs2_get_inode_nodes: short read at 0x1f3d00: 0 instead of 352. <3>JFFS2 error: (183) jffs2_do_read_inode_internal: cannot read nodes for ino 212, returned error is -5 <4>Returned error for crccheck of ino #212. Expect badness... <6>created gpio0 (pio0/0x00010000) as (254:0) <6>created gpio1 (pio0/0x00080000) as (254:1)