Can't seem to load all my Wildcard X101Ps/clones.
Tried moving them in various pci slots to no avail.
Only 1 card registers with asterisk AND I have to have the other cards plugged in or just a single card on its own fails to load.

Two cards use to register. Not sure what I did to have only 1 register with modprobe now.
Sure like to get all 3 registered.
Cards don't seem to be defective because I can get each to work if I move them around the pci slots, but they won't all work together.

What really concerns me is that the /proc/pci shows the cards as:
Tiger Jet Network Inc.

Any help appreciated!
Thanks.

------- dmesg

Zapata Telephony Interface Registered on major 196
PCI: Found IRQ 9 for device 0000:00:0e.0
PCI: Sharing IRQ 9 with 0000:00:07.2
wcfxo: DAA mode is 'FCC'
Found a Wildcard FXO: Wildcard X101P
PCI: Found IRQ 10 for device 0000:00:12.0
wcfxo: DAA mode is 'FCC'
Found a Wildcard FXO: Generic Clone
PCI: Found IRQ 7 for device 0000:00:14.0
wcfxo: DAA mode is 'FCC'
Found a Wildcard FXO: Generic Clone
module: FATAL: error running install command for wcfxo

e100: eth0: e100_watchdog: link up, 100Mbps, half-duplex
Registered tone zone 0 (United States / North America)

------------ after upgrading to Zaptel 1.2.4
Zapata Telephony Interface Registered on major 196
Zaptel Version: 1.2.4 Echo Canceller: KB1
PCI: Found IRQ 9 for device 0000:00:0e.0
PCI: Sharing IRQ 9 with 0000:00:07.2
wcfxo: DAA mode is 'FCC'
Found a Wildcard FXO: Wildcard X101P
PCI: Found IRQ 10 for device 0000:00:12.0
wcfxo: DAA mode is 'FCC'
Found a Wildcard FXO: Generic Clone
PCI: Found IRQ 7 for device 0000:00:14.0
wcfxo: DAA mode is 'FCC'
Found a Wildcard FXO: Generic Clone
module: FATAL: error running install command for wcfxo
e100: eth0: e100_watchdog: link up, 100Mbps, half-duplex
Registered tone zone 0 (United States / North America)

------- ztcfg -vvv

Zaptel Configuration
======================


Channel map:

Channel 02: FXS Kewlstart (Default) (Slaves: 02)

1 channels configured.

Changing signalling on channel 2 from Unused to FXS Kewlstart

-------- /proc/interrupts

           CPU0       
  0:     143611          XT-PIC  timer
  1:          8          XT-PIC  i8042
  2:          0          XT-PIC  cascade
  7:     125878          XT-PIC  wcfxo
  9:     125981          XT-PIC  wcfxo
 10:     125929          XT-PIC  wcfxo
 11:        724          XT-PIC  eth0
 14:       1750          XT-PIC  ide0
 15:         11          XT-PIC  ide1
NMI:          0 
ERR:          0

-------- /proc/modules

wcfxo 11008 - - Live 0xc6c8b000
zaptel 188164 - - Live 0xc6cb2000

-------- /proc/ioports

0000-001f : dma1
0020-0021 : pic1
0040-0043 : timer0
0050-0053 : timer1
0060-006f : keyboard
0080-008f : dma page reg
00a0-00a1 : pic2
00c0-00df : dma2
00f0-00ff : fpu
0170-0177 : ide1
01f0-01f7 : ide0
0376-0376 : ide1
03c0-03df : vesafb
03f6-03f6 : ide0
0cf8-0cff : PCI conf1
7000-701f : 0000:00:07.3
8000-803f : 0000:00:07.3
e000-efff : PCI Bus #01
  e800-e8ff : 0000:01:00.0
f000-f0ff : 0000:00:14.0
  f000-f0fe : wcfxo
f400-f4ff : 0000:00:12.0
  f400-f4fe : wcfxo
f800-f8ff : 0000:00:0e.0
  f800-f8fe : wcfxo
fcb0-fcbf : 0000:00:07.1
  fcb0-fcb7 : ide0
  fcb8-fcbf : ide1
fcc0-fcdf : 0000:00:07.2
fce0-fcff : 0000:00:06.0
  fce0-fcff : e100

------- /proc/pci

PCI devices found:
  Bus  0, device   0, function  0:
    Host bridge: Intel Corp. 440LX/EX - 82443LX/EX Host bridge (rev 3).
      Master Capable.  Latency=32.  
      Prefetchable 32 bit memory at 0xf8000000 [0xfbffffff].
  Bus  0, device   1, function  0:
    PCI bridge: Intel Corp. 440LX/EX - 82443LX/EX AGP bridge (rev 3).
      Master Capable.  Latency=64.  Min Gnt=8.
  Bus  0, device   6, function  0:
    Ethernet controller: Intel Corp. 82557/8/9 [Ethernet Pro 100] (rev 2).
      IRQ 11.
      Master Capable.  Latency=66.  Min Gnt=8.Max Lat=56.
      Prefetchable 32 bit memory at 0xfecfc000 [0xfecfcfff].
      I/O at 0xfce0 [0xfcff].
      Non-prefetchable 32 bit memory at 0xfed00000 [0xfedfffff].
  Bus  0, device   7, function  0:
    ISA bridge: Intel Corp. 82371AB/EB/MB PIIX4 ISA (rev 1).
  Bus  0, device   7, function  1:
    IDE interface: Intel Corp. 82371AB/EB/MB PIIX4 IDE (rev 1).
      Master Capable.  Latency=64.  
      I/O at 0xfcb0 [0xfcbf].
  Bus  0, device   7, function  2:
    USB Controller: Intel Corp. 82371AB/EB/MB PIIX4 USB (rev 1).
      IRQ 9.
      Master Capable.  Latency=64.  
      I/O at 0xfcc0 [0xfcdf].
  Bus  0, device   7, function  3:
    Bridge: Intel Corp. 82371AB/EB/MB PIIX4 ACPI (rev 1).
      IRQ 9.
  Bus  0, device  14, function  0:
    Communication controller: Tiger Jet Network Inc. Tiger3XX Modem/ISDN interface (rev 0).
      IRQ 9.
      Master Capable.  Latency=64.  Min Gnt=1.Max Lat=128.
      I/O at 0xf800 [0xf8ff].
      Non-prefetchable 32 bit memory at 0xfecff000 [0xfecfffff].
  Bus  0, device  18, function  0:
    Communication controller: Tiger Jet Network Inc. Tiger3XX Modem/ISDN interface (#2) (rev 0).
      IRQ 10.
      Master Capable.  Latency=64.  Min Gnt=1.Max Lat=128.
      I/O at 0xf400 [0xf4ff].
      Non-prefetchable 32 bit memory at 0xfecfe000 [0xfecfefff].
  Bus  0, device  20, function  0:
    Communication controller: Tiger Jet Network Inc. Tiger3XX Modem/ISDN interface (#3) (rev 0).
      IRQ 7.
      Master Capable.  Latency=64.  Min Gnt=1.Max Lat=128.
      I/O at 0xf000 [0xf0ff].
      Non-prefetchable 32 bit memory at 0xfecfd000 [0xfecfdfff].
  Bus  1, device   0, function  0:
    VGA compatible controller: ATI Technologies Inc 3D Rage Pro AGP 1X/2X (rev 92).
      Master Capable.  Latency=66.  Min Gnt=8.
      Prefetchable 32 bit memory at 0xf6000000 [0xf6ffffff].
      I/O at 0xe800 [0xe8ff].
      Non-prefetchable 32 bit memory at 0xfebfe000 [0xfebfefff].