27872 ktrace   RET   ktrace 0
 27872 ktrace   CALL  execve(0xcfbee660,0xcfbeebb0,0xcfbeebc0)
 27872 ktrace   NAMI  "/sbin/sh"
 27872 ktrace   RET   execve -1 errno 2 No such file or directory
 27872 ktrace   CALL  execve(0xcfbee660,0xcfbeebb0,0xcfbeebc0)
 27872 ktrace   NAMI  "/usr/sbin/sh"
 27872 ktrace   RET   execve -1 errno 2 No such file or directory
 27872 ktrace   CALL  execve(0xcfbee660,0xcfbeebb0,0xcfbeebc0)
 27872 ktrace   NAMI  "/bin/sh"
 27872 sh       EMUL  "native"
 27872 sh       RET   execve 0
 27872 sh       CALL  __sysctl(0.0,0x3c009000,0xcfbcf0f0,0,0)
 27872 sh       RET   __sysctl 0
 27872 sh       CALL  __sysctl(0.0,0x3c014254,0xcfbcf0e0,0,0)
 27872 sh       RET   __sysctl 0
 27872 sh       CALL  mmap(0,0x1000,0x3,0x1002,0xffffffff,0,0,0)
 27872 sh       RET   mmap -2003005440/0x889c9000
 27872 sh       CALL  mprotect(0x889c9000,0x1000,0x1)
 27872 sh       RET   mprotect 0
 27872 sh       CALL  readlink(0x3c00759c,0xcfbcee40,0x3f)
 27872 sh       NAMI  "/etc/malloc.conf"
 27872 sh       RET   readlink -1 errno 2 No such file or directory
 27872 sh       CALL  issetugid()
 27872 sh       RET   issetugid 0
 27872 sh       CALL  mmap(0,0x1000,0x3,0x1002,0xffffffff,0,0,0)
 27872 sh       RET   mmap -1981358080/0x89e6e000
 27872 sh       CALL  mmap(0,0x1000,0x3,0x1002,0xffffffff,0,0,0)
 27872 sh       RET   mmap -2048716800/0x85e31000
 27872 sh       CALL  mmap(0,0x1000,0x3,0x1002,0xffffffff,0,0,0)
 27872 sh       RET   mmap 2080821248/0x7c06d000
 27872 sh       CALL  mmap(0,0x1000,0x3,0x1002,0xffffffff,0,0,0)
 27872 sh       RET   mmap -2051837952/0x85b37000
 27872 sh       CALL  mmap(0,0x1000,0x3,0x1002,0xffffffff,0,0,0)
 27872 sh       RET   mmap -2092101632/0x834d1000
 27872 sh       CALL  mmap(0,0x1000,0x3,0x1002,0xffffffff,0,0,0)
 27872 sh       RET   mmap -2067726336/0x84c10000
 27872 sh       CALL  mmap(0,0x1000,0x3,0x1002,0xffffffff,0,0,0)
 27872 sh       RET   mmap -2123223040/0x81723000
 27872 sh       CALL  mmap(0,0x1000,0x3,0x1002,0xffffffff,0,0,0)
 27872 sh       RET   mmap -1958256640/0x8b476000
 27872 sh       CALL  mmap(0,0x1000,0x3,0x1002,0xffffffff,0,0,0)
 27872 sh       RET   mmap -1962930176/0x8b001000
 27872 sh       CALL  mmap(0,0x1000,0x3,0x1002,0xffffffff,0,0,0)
 27872 sh       RET   mmap -2134155264/0x80cb6000
 27872 sh       CALL  mmap(0,0x1000,0x3,0x1002,0xffffffff,0,0,0)
 27872 sh       RET   mmap -2110394368/0x8235f000
 27872 sh       CALL  sigaction(0x2,0x3c00b5e0,0xcfbceee0)
 27872 sh       RET   sigaction 0
 27872 sh       CALL  sigaction(0x2,0xcfbceee0,0)
 27872 sh       RET   sigaction 0
 27872 sh       CALL  sigaction(0x3,0x3c00b5e0,0xcfbceee0)
 27872 sh       RET   sigaction 0
 27872 sh       CALL  sigaction(0x3,0xcfbceee0,0)
 27872 sh       RET   sigaction 0
 27872 sh       CALL  sigaction(0xf,0x3c00b5e0,0xcfbceee0)
 27872 sh       RET   sigaction 0
 27872 sh       CALL  sigaction(0xf,0xcfbceee0,0)
 27872 sh       RET   sigaction 0
 27872 sh       CALL  sigaction(0x1,0x3c00b5e0,0xcfbceee0)
 27872 sh       RET   sigaction 0
 27872 sh       CALL  sigaction(0x1,0xcfbceee0,0)
 27872 sh       RET   sigaction 0
 27872 sh       CALL  mmap(0,0x1000,0x3,0x1002,0xffffffff,0,0,0)
 27872 sh       RET   mmap 2113798144/0x7dfe0000
 27872 sh       CALL  mmap(0,0x1000,0x3,0x1002,0xffffffff,0,0,0)
 27872 sh       RET   mmap -2143621120/0x803af000
 27872 sh       CALL  mmap(0,0x1000,0x3,0x1002,0xffffffff,0,0,0)
 27872 sh       RET   mmap -2000125952/0x88c88000
 27872 sh       CALL  mmap(0,0x1000,0x3,0x1002,0xffffffff,0,0,0)
 27872 sh       RET   mmap -2108354560/0x82551000
 27872 sh       CALL  mmap(0,0x1000,0x3,0x1002,0xffffffff,0,0,0)
 27872 sh       RET   mmap -2099617792/0x82da6000
 27872 sh       CALL  mmap(0,0x1000,0x3,0x1002,0xffffffff,0,0,0)
 27872 sh       RET   mmap -2060636160/0x852d3000
 27872 sh       CALL  mmap(0,0x1000,0x3,0x1002,0xffffffff,0,0,0)
 27872 sh       RET   mmap -2048684032/0x85e39000
 27872 sh       CALL  stat(0x85b3718d,0xcfbced90)
 27872 sh       NAMI  "/var/mail/root"
 27872 sh       RET   stat 0
 27872 sh       CALL  getpid()
 27872 sh       RET   getpid 27872/0x6ce0
 27872 sh       CALL  mmap(0,0x1000,0x3,0x1002,0xffffffff,0,0,0)
 27872 sh       RET   mmap -1962336256/0x8b092000
 27872 sh       CALL  mmap(0,0x1000,0x3,0x1002,0xffffffff,0,0,0)
 27872 sh       RET   mmap 2081964032/0x7c184000
 27872 sh       CALL  stat(0x3c004ab5,0xcfbcee40)
 27872 sh       NAMI  "/"
 27872 sh       RET   stat 0
 27872 sh       CALL  lstat(0x8b092000,0xcfbcee40)
 27872 sh       NAMI  "."
 27872 sh       RET   lstat 0
 27872 sh       CALL  open(0x8b092000,0x4,0x5)
 27872 sh       NAMI  ".."
 27872 sh       RET   open 3
 27872 sh       CALL  fstat(0x3,0xcfbced50)
 27872 sh       RET   fstat 0
 27872 sh       CALL  fcntl(0x3,0x2,0x1)
 27872 sh       RET   fcntl 0
 27872 sh       CALL  mmap(0,0x1000,0x3,0x1002,0xffffffff,0,0,0)
 27872 sh       RET   mmap -2068172800/0x84ba3000
 27872 sh       CALL  fstat(0x3,0xcfbcee40)
 27872 sh       RET   fstat 0
 27872 sh       CALL  getdirentries(0x3,0x84ba3000,0x1000,0x85b372b4)
 27872 sh       RET   getdirentries 512/0x200
 27872 sh       CALL  lseek(0x3,0,0,0,0)
 27872 sh       RET   lseek 0
 27872 sh       CALL  close(0x3)
 27872 sh       RET   close 0
 27872 sh       CALL  lstat(0x8b092000,0xcfbcee40)
 27872 sh       NAMI  "../"
 27872 sh       RET   lstat 0
 27872 sh       CALL  getppid()
 27872 sh       RET   getppid 23439/0x5b8f
 27872 sh       CALL  gettimeofday(0xcfbceb88,0)
 27872 sh       RET   gettimeofday 0
 27872 sh       CALL  gettimeofday(0xcfbcec08,0)
 27872 sh       RET   gettimeofday 0
 27872 sh       CALL  geteuid()
 27872 sh       RET   geteuid 0
 27872 sh       CALL  getuid()
 27872 sh       RET   getuid 0
 27872 sh       CALL  getgid()
 27872 sh       RET   getgid 0
 27872 sh       CALL  getegid()
 27872 sh       RET   getegid 0
 27872 sh       CALL  open(0xcfbcf2ae,0,0)
 27872 sh       NAMI  "/usr/sbin/apachectl"
 27872 sh       RET   open 3
 27872 sh       CALL  fcntl(0x3,0,0xa)
 27872 sh       RET   fcntl 10/0xa
 27872 sh       CALL  close(0x3)
 27872 sh       RET   close 0
 27872 sh       CALL  fcntl(0xa,0x2,0x1)
 27872 sh       RET   fcntl 0
 27872 sh       CALL  fstat(0,0xcfbcef48)
 27872 sh       RET   fstat 0
 27872 sh       CALL  sigprocmask(0x3,0)
 27872 sh       RET   sigprocmask 0
 27872 sh       CALL  sigaction(0x14,0x3c00b5e0,0xcfbceee0)
 27872 sh       RET   sigaction 0
 27872 sh       CALL  sigaction(0x14,0xcfbceee0,0)
 27872 sh       RET   sigaction 0
 27872 sh       CALL  mmap(0,0x1000,0x3,0x1002,0xffffffff,0,0,0)
 27872 sh       RET   mmap -1999810560/0x88cd5000
 27872 sh       CALL  read(0xa,0x8b092038,0x200)
 27872 sh       GIO   fd 10 read 512 bytes
       "#!/bin/sh
	#
	# Apache control script designed to allow an easy command line interfa\
	ce
	# to controlling Apache.  Written by Marc Slemko, 1997/08/23
	# 
	# The exit codes returned are:
	#	0 - operation completed successfully
	#	1 - 
	#	2 - usage error
	#	3 - httpd could not be started
	#	4 - httpd could not be stopped
	#	5 - httpd could not be started during a restart
	#	6 - httpd could not be restarted during a restart
	#	7 - httpd could not be restarted during a graceful restart
	#	8 - configuration syntax error
	#
	# Wh"
 27872 sh       RET   read 512/0x200
 27872 sh       CALL  read(0xa,0x8b092038,0x200)
 27872 sh       GIO   fd 10 read 512 bytes
       "en multiple arguments are given, only the error from the _last_
	# one is reported.  Run "apachectl help" for usage info
	#
	#
	# |||||||||||||||||||| START CONFIGURATION SECTION  ||||||||||||||||||\
	||
	# --------------------                              ------------------\
	--
	# 
	# the path to your PID file
	PIDFILE=/var/www/logs/httpd.pid
	#
	# the path to your httpd binary, including options if necessary
	HTTPD=/usr/sbin/httpd
	#
	# a command that outputs a formatted text version of the HTML at the
	# url given on the c"
 27872 sh       RET   read 512/0x200
 27872 sh       CALL  write(0x2,0x84c10408,0x22)
 27872 sh       GIO   fd 2 wrote 34 bytes
       "+ PIDFILE=/var/www/logs/httpd.pid
       "
 27872 sh       RET   write 34/0x22
 27872 sh       CALL  write(0x2,0x84c10408,0x18)
 27872 sh       GIO   fd 2 wrote 24 bytes
       "+ HTTPD=/usr/sbin/httpd
       "
 27872 sh       RET   write 24/0x18
 27872 sh       CALL  read(0xa,0x8b092038,0x200)
 27872 sh       GIO   fd 10 read 512 bytes
       "ommand line.  Designed for lynx, however other
	# programs may work.  
	LYNX="lynx -dump"
	#
	# the URL to your server's mod_status status page.  If you do not
	# have one, then status and fullstatus will not work.
	STATUSURL="http://localhost/server-status"
	#
	# --------------------                              ------------------\
	--
	# ||||||||||||||||||||   END CONFIGURATION SECTION  ||||||||||||||||||\
	||
	
	ERROR=0
	ARGV="$@"
	if [ "x$ARGV" = "x" ] ; then 
	    ARGS="help"
	fi
	
	RCFLAGS=""
	. /etc/rc.conf
	if [ "X${httpd_f"
 27872 sh       RET   read 512/0x200
 27872 sh       CALL  write(0x2,0x84c10408,0x12)
 27872 sh       GIO   fd 2 wrote 18 bytes
       "+ LYNX=lynx -dump
       "
 27872 sh       RET   write 18/0x12
 27872 sh       CALL  write(0x2,0x84c10408,0x2b)
 27872 sh       GIO   fd 2 wrote 43 bytes
       "+ STATUSURL=http://localhost/server-status
       "
 27872 sh       RET   write 43/0x2b
 27872 sh       CALL  write(0x2,0x84c10408,0xa)
 27872 sh       GIO   fd 2 wrote 10 bytes
       "+ ERROR=0
       "
 27872 sh       RET   write 10/0xa
 27872 sh       CALL  write(0x2,0x84c10408,0x8)
 27872 sh       GIO   fd 2 wrote 8 bytes
       "+ ARGV=
       "
 27872 sh       RET   write 8
 27872 sh       CALL  write(0x2,0x84c10408,0xc)
 27872 sh       GIO   fd 2 wrote 12 bytes
       "+ [ x = x ]
       "
 27872 sh       RET   write 12/0xc
 27872 sh       CALL  write(0x2,0x84c10408,0xc)
 27872 sh       GIO   fd 2 wrote 12 bytes
       "+ ARGS=help
       "
 27872 sh       RET   write 12/0xc
 27872 sh       CALL  write(0x2,0x84c10408,0xb)
 27872 sh       GIO   fd 2 wrote 11 bytes
       "+ RCFLAGS=
       "
 27872 sh       RET   write 11/0xb
 27872 sh       CALL  write(0x2,0x84c10408,0x11)
 27872 sh       GIO   fd 2 wrote 17 bytes
       "+ . /etc/rc.conf
       "
 27872 sh       RET   write 17/0x11
 27872 sh       CALL  stat(0x85b37448,0xcfbcecf0)
 27872 sh       NAMI  "/etc/rc.conf"
 27872 sh       RET   stat 0
 27872 sh       CALL  access(0x85b37448,0x4)
 27872 sh       NAMI  "/etc/rc.conf"
 27872 sh       RET   access 0
 27872 sh       CALL  open(0x85b37448,0,0)
 27872 sh       NAMI  "/etc/rc.conf"
 27872 sh       RET   open 3
 27872 sh       CALL  fcntl(0x3,0,0xa)
 27872 sh       RET   fcntl 11/0xb
 27872 sh       CALL  close(0x3)
 27872 sh       RET   close 0
 27872 sh       CALL  fcntl(0xb,0x2,0x1)
 27872 sh       RET   fcntl 0
 27872 sh       CALL  mmap(0,0x1000,0x3,0x1002,0xffffffff,0,0,0)
 27872 sh       RET   mmap -2060414976/0x85309000
 27872 sh       CALL  mmap(0,0x1000,0x3,0x1002,0xffffffff,0,0,0)
 27872 sh       RET   mmap 2122346496/0x7e807000
 27872 sh       CALL  read(0xb,0x8b092838,0x200)
 27872 sh       GIO   fd 11 read 512 bytes
       "#!/bin/sh -
	#
	#	$OpenBSD: rc.conf,v 1.104 2004/11/03 18:04:47 henning Exp $
	
	# set these to "NO" to turn them off.  otherwise, they're used as flag\
	s
	routed_flags=NO		# for normal use: "-q"
	mrouted_flags=NO	# for normal use: "", if activated
				# be sure to enable multicast_router below.
	bgpd_flags=NO		# for normal use: ""
	rarpd_flags=NO		# for normal use: "-a"
	bootparamd_flags=NO	# for normal use: ""
	rbootd_flags=NO		# for normal use: ""
	sshd_flags="NO"		# for normal use: ""
	named_flags=""		# for normal use"
 27872 sh       RET   read 512/0x200
 27872 sh       CALL  write(0x2,0x84c10408,0x12)
 27872 sh       GIO   fd 2 wrote 18 bytes
       "+ routed_flags=NO
       "
 27872 sh       RET   write 18/0x12
 27872 sh       CALL  write(0x2,0x84c10408,0x13)
 27872 sh       GIO   fd 2 wrote 19 bytes
       "+ mrouted_flags=NO
       "
 27872 sh       RET   write 19/0x13
 27872 sh       CALL  write(0x2,0x84c10408,0x10)
 27872 sh       GIO   fd 2 wrote 16 bytes
       "+ bgpd_flags=NO
       "
 27872 sh       RET   write 16/0x10
 27872 sh       CALL  write(0x2,0x84c10408,0x11)
 27872 sh       GIO   fd 2 wrote 17 bytes
       "+ rarpd_flags=NO
       "
 27872 sh       RET   write 17/0x11
 27872 sh       CALL  write(0x2,0x84c10408,0x16)
 27872 sh       GIO   fd 2 wrote 22 bytes
       "+ bootparamd_flags=NO
       "
 27872 sh       RET   write 22/0x16
 27872 sh       CALL  write(0x2,0x84c10408,0x12)
 27872 sh       GIO   fd 2 wrote 18 bytes
       "+ rbootd_flags=NO
       "
 27872 sh       RET   write 18/0x12
 27872 sh       CALL  write(0x2,0x84c10408,0x10)
 27872 sh       GIO   fd 2 wrote 16 bytes
       "+ sshd_flags=NO
       "
 27872 sh       RET   write 16/0x10
 27872 sh       CALL  read(0xb,0x8b092838,0x200)
 27872 sh       GIO   fd 11 read 512 bytes
       ": ""
	rdate_flags=NO		# for normal use: [RFC868-host] or [-n RFC2030\
	-host]
	timed_flags=NO		# for normal use: ""
	ntpd_flags=NO		# for normal use: ""
	isakmpd_flags=NO	# for normal use: ""
	mopd_flags=NO		# for normal use: "-a"
	apmd_flags=NO		# for normal use: ""
	dhcpd_flags=NO		# for normal use: ""
	rtadvd_flags=NO		# for normal use: list of interfaces
				# be sure to set net.inet6.ip6.forwarding=1
	route6d_flags=NO	# for normal use: ""
				# be sure to set net.inet6.ip6.forwarding=1
	rtsold_flags=NO		# for normal "
 27872 sh       RET   read 512/0x200
 27872 sh       CALL  write(0x2,0x84c10408,0xf)
 27872 sh       GIO   fd 2 wrote 15 bytes
       "+ named_flags=
       "
 27872 sh       RET   write 15/0xf
 27872 sh       CALL  write(0x2,0x84c10408,0x11)
 27872 sh       GIO   fd 2 wrote 17 bytes
       "+ rdate_flags=NO
       "
 27872 sh       RET   write 17/0x11
 27872 sh       CALL  write(0x2,0x84c10408,0x11)
 27872 sh       GIO   fd 2 wrote 17 bytes
       "+ timed_flags=NO
       "
 27872 sh       RET   write 17/0x11
 27872 sh       CALL  write(0x2,0x84c10408,0x10)
 27872 sh       GIO   fd 2 wrote 16 bytes
       "+ ntpd_flags=NO
       "
 27872 sh       RET   write 16/0x10
 27872 sh       CALL  write(0x2,0x84c10408,0x13)
 27872 sh       GIO   fd 2 wrote 19 bytes
       "+ isakmpd_flags=NO
       "
 27872 sh       RET   write 19/0x13
 27872 sh       CALL  write(0x2,0x84c10408,0x10)
 27872 sh       GIO   fd 2 wrote 16 bytes
       "+ mopd_flags=NO
       "
 27872 sh       RET   write 16/0x10
 27872 sh       CALL  write(0x2,0x84c10408,0x10)
 27872 sh       GIO   fd 2 wrote 16 bytes
       "+ apmd_flags=NO
       "
 27872 sh       RET   write 16/0x10
 27872 sh       CALL  write(0x2,0x84c10408,0x11)
 27872 sh       GIO   fd 2 wrote 17 bytes
       "+ dhcpd_flags=NO
       "
 27872 sh       RET   write 17/0x11
 27872 sh       CALL  write(0x2,0x84c10408,0x12)
 27872 sh       GIO   fd 2 wrote 18 bytes
       "+ rtadvd_flags=NO
       "
 27872 sh       RET   write 18/0x12
 27872 sh       CALL  write(0x2,0x84c10408,0x13)
 27872 sh       GIO   fd 2 wrote 19 bytes
       "+ route6d_flags=NO
       "
 27872 sh       RET   write 19/0x13
 27872 sh       CALL  read(0xb,0x8b092838,0x200)
 27872 sh       GIO   fd 11 read 512 bytes
       "use: interface
				# be sure to set net.inet6.ip6.forwarding=0
				# be sure to set net.inet6.ip6.accept_rtadv=1
	lpd_flags=NO		# for normal use: "" (or "-l" for debugging)
	sensorsd_flags=NO	# for normal use: ""
	hotplugd_flags=NO	# for normal use: ""
	
	# use -u to disable chroot, see httpd(8)
	httpd_flags="-DSSL"		# for normal use: "" (or "-DSSL" after\
	 reading ssl(8))
	
	# For normal use: "-L sm-mta -bd -q30m", and note there is a cron job
	sendmail_flags="-L sm-mta -bd -q30m"
	spamd_flags=NO		# for normal use: "" a"
 27872 sh       RET   read 512/0x200
 27872 sh       CALL  write(0x2,0x84c10408,0x12)
 27872 sh       GIO   fd 2 wrote 18 bytes
       "+ rtsold_flags=NO
       "
 27872 sh       RET   write 18/0x12
 27872 sh       CALL  write(0x2,0x84c10408,0xf)
 27872 sh       GIO   fd 2 wrote 15 bytes
       "+ lpd_flags=NO
       "
 27872 sh       RET   write 15/0xf
 27872 sh       CALL  write(0x2,0x84c10408,0x14)
 27872 sh       GIO   fd 2 wrote 20 bytes
       "+ sensorsd_flags=NO
       "
 27872 sh       RET   write 20/0x14
 27872 sh       CALL  write(0x2,0x84c10408,0x14)
 27872 sh       GIO   fd 2 wrote 20 bytes
       "+ hotplugd_flags=NO
       "
 27872 sh       RET   write 20/0x14
 27872 sh       CALL  write(0x2,0x84c10408,0x14)
 27872 sh       GIO   fd 2 wrote 20 bytes
       "+ httpd_flags=-DSSL
       "
 27872 sh       RET   write 20/0x14
 27872 sh       CALL  write(0x2,0x84c10408,0x25)
 27872 sh       GIO   fd 2 wrote 37 bytes
       "+ sendmail_flags=-L sm-mta -bd -q30m
       "
 27872 sh       RET   write 37/0x25
 27872 sh       CALL  read(0xb,0x8b092838,0x200)
 27872 sh       GIO   fd 11 read 512 bytes
       "nd see spamd-setup(8)
	spamd_grey=NO		# use spamd greylisting if YES
	spamlogd_flags=""	# use eg. "-i interface" and see spamlogd(8)
	
	# Set to NO if ftpd is running out of inetd
	ftpd_flags=NO		# for non-inetd use: "-D"
	
	# Set to NO if identd is running out of inetd
	identd_flags=NO		# for non-inetd use: "-b -elo"
	
	# On some architectures, you must also disable console getty in /etc/t\
	tys
	xdm_flags=NO		# for normal use: ""
	
	# For enabling console mouse support (i386 and alpha only)
	wsmoused_flags=NO	# for ps/2 o"
 27872 sh       RET   read 512/0x200
 27872 sh       CALL  write(0x2,0x84c10408,0x11)
 27872 sh       GIO   fd 2 wrote 17 bytes
       "+ spamd_flags=NO
       "
 27872 sh       RET   write 17/0x11
 27872 sh       CALL  write(0x2,0x84c10408,0x10)
 27872 sh       GIO   fd 2 wrote 16 bytes
       "+ spamd_grey=NO
       "
 27872 sh       RET   write 16/0x10
 27872 sh       CALL  write(0x2,0x84c10408,0x12)
 27872 sh       GIO   fd 2 wrote 18 bytes
       "+ spamlogd_flags=
       "
 27872 sh       RET   write 18/0x12
 27872 sh       CALL  write(0x2,0x84c10408,0x10)
 27872 sh       GIO   fd 2 wrote 16 bytes
       "+ ftpd_flags=NO
       "
 27872 sh       RET   write 16/0x10
 27872 sh       CALL  write(0x2,0x84c10408,0x12)
 27872 sh       GIO   fd 2 wrote 18 bytes
       "+ identd_flags=NO
       "
 27872 sh       RET   write 18/0x12
 27872 sh       CALL  write(0x2,0x84c10408,0xf)
 27872 sh       GIO   fd 2 wrote 15 bytes
       "+ xdm_flags=NO
       "
 27872 sh       RET   write 15/0xf
 27872 sh       CALL  read(0xb,0x8b092838,0x200)
 27872 sh       GIO   fd 11 read 512 bytes
       "r usb mice: "", serial: "-p /dev/cua00"
	
	# set the following to "YES" to turn them on
	rwhod=NO
	nfs_server=NO		# see sysctl.conf for nfs client configuration
	lockd=NO
	amd=NO
	pf=YES			# Packet filter / NAT
	portmap=NO		# Note: inetd(8) rpc services need portmap too
	inetd=NO		# almost always needed
	check_quotas=YES	# NO may be desirable in some YP environments
	
	krb5_master_kdc=NO	# KerberosV master KDC. Run 'info heimdal' for\
	 help.
	krb5_slave_kdc=NO	# KerberosV slave KDC.
	afs=NO			# mount and run afs
	
	# Multica"
 27872 sh       RET   read 512/0x200
 27872 sh       CALL  write(0x2,0x84c10408,0x14)
 27872 sh       GIO   fd 2 wrote 20 bytes
       "+ wsmoused_flags=NO
       "
 27872 sh       RET   write 20/0x14
 27872 sh       CALL  write(0x2,0x84c10408,0xb)
 27872 sh       GIO   fd 2 wrote 11 bytes
       "+ rwhod=NO
       "
 27872 sh       RET   write 11/0xb
 27872 sh       CALL  write(0x2,0x84c10408,0x10)
 27872 sh       GIO   fd 2 wrote 16 bytes
       "+ nfs_server=NO
       "
 27872 sh       RET   write 16/0x10
 27872 sh       CALL  write(0x2,0x84c10408,0xb)
 27872 sh       GIO   fd 2 wrote 11 bytes
       "+ lockd=NO
       "
 27872 sh       RET   write 11/0xb
 27872 sh       CALL  write(0x2,0x84c10408,0x9)
 27872 sh       GIO   fd 2 wrote 9 bytes
       "+ amd=NO
       "
 27872 sh       RET   write 9
 27872 sh       CALL  write(0x2,0x84c10408,0x9)
 27872 sh       GIO   fd 2 wrote 9 bytes
       "+ pf=YES
       "
 27872 sh       RET   write 9
 27872 sh       CALL  write(0x2,0x84c10408,0xd)
 27872 sh       GIO   fd 2 wrote 13 bytes
       "+ portmap=NO
       "
 27872 sh       RET   write 13/0xd
 27872 sh       CALL  write(0x2,0x84c10408,0xb)
 27872 sh       GIO   fd 2 wrote 11 bytes
       "+ inetd=NO
       "
 27872 sh       RET   write 11/0xb
 27872 sh       CALL  write(0x2,0x84c10408,0x13)
 27872 sh       GIO   fd 2 wrote 19 bytes
       "+ check_quotas=YES
       "
 27872 sh       RET   write 19/0x13
 27872 sh       CALL  write(0x2,0x84c10408,0x15)
 27872 sh       GIO   fd 2 wrote 21 bytes
       "+ krb5_master_kdc=NO
       "
 27872 sh       RET   write 21/0x15
 27872 sh       CALL  write(0x2,0x84c10408,0x14)
 27872 sh       GIO   fd 2 wrote 20 bytes
       "+ krb5_slave_kdc=NO
       "
 27872 sh       RET   write 20/0x14
 27872 sh       CALL  write(0x2,0x84c10408,0x9)
 27872 sh       GIO   fd 2 wrote 9 bytes
       "+ afs=NO
       "
 27872 sh       RET   write 9
 27872 sh       CALL  read(0xb,0x8b092838,0x200)
 27872 sh       GIO   fd 11 read 512 bytes
       "st routing configuration
	# Please look at netstart(8) for a detailed description if you change \
	these
	multicast_host=NO	# Route all multicast packets to a single inte\
	rface
	multicast_router=NO	# A multicast routing daemon will be run, e.g.\
	 mrouted
	
	# miscellaneous other flags
	# only used if the appropriate server is marked YES above
	savecore_flags=			# "-z" to compress
	ypserv_flags=			# E.g. -1 for YP v1, -d for DNS etc
	yppasswdd_flags=NO		# "-d /etc/yp" if passwd files are in \
	/etc/yp
	nfsd_flags="-tun 4"		# C"
 27872 sh       RET   read 512/0x200
 27872 sh       CALL  mmap(0,0x1000,0x3,0x1002,0xffffffff,0,0,0)
 27872 sh       RET   mmap -2032771072/0x86d66000
 27872 sh       CALL  mmap(0,0x1000,0x3,0x1002,0xffffffff,0,0,0)
 27872 sh       RET   mmap 2102222848/0x7d4d6000
 27872 sh       CALL  write(0x2,0x84c10408,0x14)
 27872 sh       GIO   fd 2 wrote 20 bytes
       "+ multicast_host=NO
       "
 27872 sh       RET   write 20/0x14
 27872 sh       CALL  write(0x2,0x84c10408,0x16)
 27872 sh       GIO   fd 2 wrote 22 bytes
       "+ multicast_router=NO
       "
 27872 sh       RET   write 22/0x16
 27872 sh       CALL  write(0x2,0x84c10408,0x12)
 27872 sh       GIO   fd 2 wrote 18 bytes
       "+ savecore_flags=
       "
 27872 sh       RET   write 18/0x12
 27872 sh       CALL  write(0x2,0x84c10408,0x10)
 27872 sh       GIO   fd 2 wrote 16 bytes
       "+ ypserv_flags=
       "
 27872 sh       RET   write 16/0x10
 27872 sh       CALL  write(0x2,0x84c10408,0x15)
 27872 sh       GIO   fd 2 wrote 21 bytes
       "+ yppasswdd_flags=NO
       "
 27872 sh       RET   write 21/0x15
 27872 sh       CALL  read(0xb,0x8b092838,0x200)
 27872 sh       GIO   fd 11 read 512 bytes
       "rank the 4 for a busy NFS fileserver
	amd_dir=/tmp_mnt		# AMD's mount directory
	amd_master=/etc/amd/master	# AMD 'master' map
	syslogd_flags=			# add more flags, ie. "-u -a /chroot/d\
	ev/log"
	pf_rules=/etc/pf.conf		# Packet filter rules file
	pflogd_flags=			# add more flags, ie. "-s 256"
	afsd_flags=			# Flags passed to afsd
	shlib_dirs="$shlib_dirs /usr/local/lib/mysql""			# extr\
	a directories for ldconfig, separated
					# by space
	mysql=YES
	local_rcconf="/etc/rc.conf.local"
	
	[ -f ${local_rcconf} ] && . ${local_r"
 27872 sh       RET   read 512/0x200
 27872 sh       CALL  write(0x2,0x84c10408,0x14)
 27872 sh       GIO   fd 2 wrote 20 bytes
       "+ nfsd_flags=-tun 4
       "
 27872 sh       RET   write 20/0x14
 27872 sh       CALL  write(0x2,0x84c10408,0x13)
 27872 sh       GIO   fd 2 wrote 19 bytes
       "+ amd_dir=/tmp_mnt
       "
 27872 sh       RET   write 19/0x13
 27872 sh       CALL  write(0x2,0x84c10408,0x1d)
 27872 sh       GIO   fd 2 wrote 29 bytes
       "+ amd_master=/etc/amd/master
       "
 27872 sh       RET   write 29/0x1d
 27872 sh       CALL  write(0x2,0x84c10408,0x11)
 27872 sh       GIO   fd 2 wrote 17 bytes
       "+ syslogd_flags=
       "
 27872 sh       RET   write 17/0x11
 27872 sh       CALL  write(0x2,0x84c10408,0x18)
 27872 sh       GIO   fd 2 wrote 24 bytes
       "+ pf_rules=/etc/pf.conf
       "
 27872 sh       RET   write 24/0x18
 27872 sh       CALL  write(0x2,0x84c10408,0x10)
 27872 sh       GIO   fd 2 wrote 16 bytes
       "+ pflogd_flags=
       "
 27872 sh       RET   write 16/0x10
 27872 sh       CALL  write(0x2,0x84c10408,0xe)
 27872 sh       GIO   fd 2 wrote 14 bytes
       "+ afsd_flags=
       "
 27872 sh       RET   write 14/0xe
 27872 sh       CALL  mmap(0,0x1000,0x3,0x1002,0xffffffff,0,0,0)
 27872 sh       RET   mmap -2109702144/0x82408000
 27872 sh       CALL  mmap(0,0x1000,0x3,0x1002,0xffffffff,0,0,0)
 27872 sh       RET   mmap -2119524352/0x81aaa000
 27872 sh       CALL  read(0xb,0x8b092838,0x200)
 27872 sh       GIO   fd 11 read 31 bytes
       "cconf} # Do not edit this line
       "
 27872 sh       RET   read 31/0x1f
 27872 sh       CALL  read(0xb,0x8b092838,0x200)
 27872 sh       RET   read 0
 27872 sh       CALL  close(0xb)
 27872 sh       RET   close 0
 27872 sh       CALL  write(0x2,0x84c10408,0x38)
 27872 sh       GIO   fd 2 wrote 56 bytes
       "/usr/sbin/apachectl: /etc/rc.conf[91]: no closing quote
       "
 27872 sh       RET   write 56/0x38
 27872 sh       CALL  read(0xa,0x8b092038,0x200)
 27872 sh       GIO   fd 10 read 512 bytes
       "lags}" != X"NO"  ]; then
		RCFLAGS="${httpd_flags}"
	fi
	
	for ARG in $@ $ARGS
	do
	    # check for pidfile
	    if [ -f $PIDFILE ] ; then
		PID=`cat $PIDFILE`
		if [ "x$PID" != "x" ] && kill -0 $PID 2>/dev/null ; then
		    STATUS="httpd (pid $PID) running"
		    RUNNING=1
		else
		    STATUS="httpd (pid $PID?) not running"
		    RUNNING=0
		fi
	    else
		STATUS="httpd (no pid file) not running"
		RUNNING=0
	    fi
	
	    case $ARG in
	    start)
		if [ $RUNNING -eq 1 ]; then
		    echo "$0 $ARG: httpd (pid $PID) already running"
 27872 sh       RET   read 512/0x200
 27872 sh       CALL  write(0x2,0x84c10408,0x14)
 27872 sh       GIO   fd 2 wrote 20 bytes
       "+ [ X-DSSL != XNO ]
       "
 27872 sh       RET   write 20/0x14
 27872 sh       CALL  write(0x2,0x84c10408,0x10)
 27872 sh       GIO   fd 2 wrote 16 bytes
       "+ RCFLAGS=-DSSL
       "
 27872 sh       RET   write 16/0x10
 27872 sh       CALL  read(0xa,0x8b092038,0x200)
 27872 sh       GIO   fd 10 read 512 bytes
       ""
		    continue
		fi
		if $HTTPD $RCFLAGS ; then
		    echo "$0 $ARG: httpd started"
		else
		    echo "$0 $ARG: httpd could not be started"
		    ERROR=3
		fi
		;;
	    startssl|sslstart|start-SSL)
		if [ $RUNNING -eq 1 ]; then
		    echo "$0 $ARG: httpd (pid $PID) already running"
		    continue
		fi
		if $HTTPD $RCFLAGS -DSSL; then
		    echo "$0 $ARG: httpd started"
		else
		    echo "$0 $ARG: httpd could not be started"
		    ERROR=3
		fi
		;;
	    stop)
		if [ $RUNNING -eq 0 ]; then
		    echo "$0 $ARG: $STATUS"
		    contin"
 27872 sh       RET   read 512/0x200
 27872 sh       CALL  read(0xa,0x8b092038,0x200)
 27872 sh       GIO   fd 10 read 512 bytes
       "ue
		fi
		if kill $PID ; then
		    echo "$0 $ARG: httpd stopped"
		else
		    echo "$0 $ARG: httpd could not be stopped"
		    ERROR=4
		fi
		;;
	    restart)
		if [ $RUNNING -eq 0 ]; then
		    echo "$0 $ARG: httpd not running, trying to start"
		    if $HTTPD ; then
			echo "$0 $ARG: httpd started"
		    else
			echo "$0 $ARG: httpd could not be started"
			ERROR=5
		    fi
		else
		    if $HTTPD -t >/dev/null 2>&1; then
			if kill -HUP $PID ; then
			    echo "$0 $ARG: httpd restarted"
			else
			    echo "$0 $ARG: httpd coul"
 27872 sh       RET   read 512/0x200
 27872 sh       CALL  read(0xa,0x8b092038,0x200)
 27872 sh       GIO   fd 10 read 512 bytes
       "d not be restarted"
			    ERROR=6
			fi
		    else
			echo "$0 $ARG: configuration broken, ignoring restart"
			echo "$0 $ARG: (run 'apachectl configtest' for details\
	)"
			ERROR=6
		    fi
		fi
		;;
	    graceful)
		if [ $RUNNING -eq 0 ]; then
		    echo "$0 $ARG: httpd not running, trying to start"
		    if $HTTPD ; then
			echo "$0 $ARG: httpd started"
		    else
			echo "$0 $ARG: httpd could not be started"
			ERROR=5
		    fi
		else
		    if $HTTPD -t >/dev/null 2>&1; then
			if kill -USR1 $PID ; then
			    echo "$0 $ARG: "
 27872 sh       RET   read 512/0x200
 27872 sh       CALL  mmap(0,0x1000,0x3,0x1002,0xffffffff,0,0,0)
 27872 sh       RET   mmap 2090549248/0x7c9b4000
 27872 sh       CALL  mmap(0,0x1000,0x3,0x1002,0xffffffff,0,0,0)
 27872 sh       RET   mmap 2097000448/0x7cfdb000
 27872 sh       CALL  mmap(0,0x1000,0x3,0x1002,0xffffffff,0,0,0)
 27872 sh       RET   mmap -1981083648/0x89eb1000
 27872 sh       CALL  mmap(0,0x1000,0x3,0x1002,0xffffffff,0,0,0)
 27872 sh       RET   mmap -2068189184/0x84b9f000
 27872 sh       CALL  read(0xa,0x8b092038,0x200)
 27872 sh       GIO   fd 10 read 512 bytes
       "httpd gracefully restarted"
			else
			    echo "$0 $ARG: httpd could not be restarted"
			    ERROR=7
			fi
		    else
			echo "$0 $ARG: configuration broken, ignoring restart"
			echo "$0 $ARG: (run 'apachectl configtest' for details\
	)"
			ERROR=7
		    fi
		fi
		;;
	    status)
		$LYNX $STATUSURL | awk ' /process$/ { print; exit } { print } \
	'
		;;
	    fullstatus)
		$LYNX $STATUSURL
		;;
	    configtest)
		if $HTTPD -t; then
		    :
		else
		    ERROR=8
		fi
		;;
	    *)
		BNAME=`basename $0`
		echo "usage: $BNAME [ start | startss"
 27872 sh       RET   read 512/0x200
 27872 sh       CALL  read(0xa,0x8b092038,0x200)
 27872 sh       GIO   fd 10 read 512 bytes
       "l | stop | restart | graceful | "
		echo "                   status | fullstatus | configtest | he\
	lp ]"
		cat <<EOF
	
	start      - start httpd
	startssl   - start httpd with SSL enabled
	stop       - stop httpd
	restart    - restart httpd if running by sending a SIGHUP or start if 
	             not running
	graceful   - do a graceful restart by sending a SIGUSR1 or start if no\
	t running
	status     - dump a short status screen; requires lynx and mod_status \
	enabled
	fullstatus - dump a full status screen; requires lyn"
 27872 sh       RET   read 512/0x200
 27872 sh       CALL  read(0xa,0x8b092038,0x200)
 27872 sh       GIO   fd 10 read 512 bytes
       "x and mod_status enabled
	configtest - do a configuration syntax test
	help       - this screen
	
	EOF
		ERROR=2
	    ;;
	
	    esac
	
	done
	
	exit $ERROR
	
	## ===================================================================\
	=
	## The Apache Software License, Version 1.1
	##
	## Copyright (c) 2000-2003 The Apache Software Foundation.  All rights
	## reserved.
	##
	## Redistribution and use in source and binary forms, with or without
	## modification, are permitted provided that the following conditions
	## are met:
	##
	## 1. "
 27872 sh       RET   read 512/0x200
 27872 sh       CALL  write(0x2,0x84c10408,0x21)
 27872 sh       GIO   fd 2 wrote 33 bytes
       "+ [ -f /var/www/logs/httpd.pid ]
       "
 27872 sh       RET   write 33/0x21
 27872 sh       CALL  stat(0x85309748,0xcfbceac0)
 27872 sh       NAMI  "/var/www/logs/httpd.pid"
 27872 sh       RET   stat 0
 27872 sh       CALL  pipe(0xcfbceaf0)
 27872 sh       RET   pipe 0
 27872 sh       CALL  fcntl(0x3,0,0xa)
 27872 sh       RET   fcntl 11/0xb
 27872 sh       CALL  close(0x3)
 27872 sh       RET   close 0
 27872 sh       CALL  fcntl(0xb,0x2,0x1)
 27872 sh       RET   fcntl 0
 27872 sh       CALL  fcntl(0x4,0,0xa)
 27872 sh       RET   fcntl 12/0xc
 27872 sh       CALL  close(0x4)
 27872 sh       RET   close 0
 27872 sh       CALL  fcntl(0xc,0x2,0x1)
 27872 sh       RET   fcntl 0
 27872 sh       CALL  fcntl(0x1,0,0xa)
 27872 sh       RET   fcntl 13/0xd
 27872 sh       CALL  close(0x1)
 27872 sh       RET   close 0
 27872 sh       CALL  fcntl(0xd,0x2,0x1)
 27872 sh       RET   fcntl 0
 27872 sh       CALL  dup2(0xc,0x1)
 27872 sh       RET   dup2 1
 27872 sh       CALL  close(0xc)
 27872 sh       RET   close 0
 27872 sh       CALL  sigprocmask(0x1,0x80000)
 27872 sh       RET   sigprocmask 0
 27872 sh       CALL  fork()
 27872 sh       RET   fork 18702/0x490e
 27872 sh       CALL  sigprocmask(0x3,0)
 27872 sh       RET   sigprocmask 524288/0x80000
 27872 sh       CALL  dup2(0xd,0x1)
 27872 sh       RET   dup2 1
 27872 sh       CALL  close(0xd)
 27872 sh       RET   close 0
 27872 sh       CALL  sigprocmask(0x1,0x80000)
 27872 sh       RET   sigprocmask 0
 27872 sh       CALL  sigprocmask(0x3,0)
 27872 sh       RET   sigprocmask 524288/0x80000
 27872 sh       CALL  read(0xb,0x8b092838,0x200)
 27872 sh       GIO   fd 11 read 6 bytes
       "18712
       "
 27872 sh       RET   read 6
 27872 sh       CALL  read(0xb,0x8b092838,0x200)
 27872 sh       RET   read 0
 27872 sh       CALL  close(0xb)
 27872 sh       RET   close 0
 27872 sh       CALL  sigprocmask(0x1,0x80000)
 27872 sh       RET   sigprocmask 0
 27872 sh       CALL  sigsuspend(0)
 27872 sh       PSIG  SIGCHLD caught handler=0x1c01bc74 mask=0x80000
 27872 sh       RET   sigsuspend -1 errno 4 Interrupted system call
 27872 sh       CALL  getrusage(0xffffffff,0xcfbce938)
 27872 sh       RET   getrusage 0
 27872 sh       CALL  wait4(0xffffffff,0xcfbce8e4,0x3,0)
 27872 sh       RET   wait4 18702/0x490e
 27872 sh       CALL  getrusage(0xffffffff,0xcfbce8e8)
 27872 sh       RET   getrusage 0
 27872 sh       CALL  wait4(0xffffffff,0xcfbce8e4,0x3,0)
 27872 sh       RET   wait4 -1 errno 10 No child processes
 27872 sh       CALL  sigreturn(0xcfbce9e8)
 27872 sh       RET   sigreturn JUSTRETURN
 27872 sh       CALL  sigprocmask(0x3,0)
 27872 sh       RET   sigprocmask 524288/0x80000
 27872 sh       CALL  write(0x2,0x84c10408,0xc)
 27872 sh       GIO   fd 2 wrote 12 bytes
       "+ PID=18712
       "
 27872 sh       RET   write 12/0xc
 27872 sh       CALL  write(0x2,0x84c10408,0x12)
 27872 sh       GIO   fd 2 wrote 18 bytes
       "+ [ x18712 != x ]
       "
 27872 sh       RET   write 18/0x12
 27872 sh       CALL  write(0x2,0x84c10408,0x10)
 27872 sh       GIO   fd 2 wrote 16 bytes
       "+ kill -0 18712
       "
 27872 sh       RET   write 16/0x10
 27872 sh       CALL  write(0x2,0x84c10408,0x10)
 27872 sh       GIO   fd 2 wrote 16 bytes
       "+ 2> /dev/null 
       "
 27872 sh       RET   write 16/0x10
 27872 sh       CALL  open(0x85309768,0x601,0x1b6)
 27872 sh       NAMI  "/dev/null"
 27872 sh       RET   open 3
 27872 sh       CALL  fcntl(0x2,0,0xa)
 27872 sh       RET   fcntl 11/0xb
 27872 sh       CALL  fcntl(0xb,0x2,0x1)
 27872 sh       RET   fcntl 0
 27872 sh       CALL  dup2(0x3,0x2)
 27872 sh       RET   dup2 2
 27872 sh       CALL  close(0x3)
 27872 sh       RET   close 0
 27872 sh       CALL  kill(0x4918,0)
 27872 sh       RET   kill 0
 27872 sh       CALL  dup2(0xb,0x2)
 27872 sh       RET   dup2 2
 27872 sh       CALL  close(0xb)
 27872 sh       RET   close 0
 27872 sh       CALL  write(0x2,0x84c10408,0x23)
 27872 sh       GIO   fd 2 wrote 35 bytes
       "+ STATUS=httpd (pid 18712) running
       "
 27872 sh       RET   write 35/0x23
 27872 sh       CALL  write(0x2,0x84c10408,0xc)
 27872 sh       GIO   fd 2 wrote 12 bytes
       "+ RUNNING=1
       "
 27872 sh       RET   write 12/0xc
 27872 sh       CALL  pipe(0xcfbceaf0)
 27872 sh       RET   pipe 0
 27872 sh       CALL  fcntl(0x3,0,0xa)
 27872 sh       RET   fcntl 11/0xb
 27872 sh       CALL  close(0x3)
 27872 sh       RET   close 0
 27872 sh       CALL  fcntl(0xb,0x2,0x1)
 27872 sh       RET   fcntl 0
 27872 sh       CALL  fcntl(0x4,0,0xa)
 27872 sh       RET   fcntl 12/0xc
 27872 sh       CALL  close(0x4)
 27872 sh       RET   close 0
 27872 sh       CALL  fcntl(0xc,0x2,0x1)
 27872 sh       RET   fcntl 0
 27872 sh       CALL  fcntl(0x1,0,0xa)
 27872 sh       RET   fcntl 13/0xd
 27872 sh       CALL  close(0x1)
 27872 sh       RET   close 0
 27872 sh       CALL  fcntl(0xd,0x2,0x1)
 27872 sh       RET   fcntl 0
 27872 sh       CALL  dup2(0xc,0x1)
 27872 sh       RET   dup2 1
 27872 sh       CALL  close(0xc)
 27872 sh       RET   close 0
 27872 sh       CALL  sigprocmask(0x1,0x80000)
 27872 sh       RET   sigprocmask 0
 27872 sh       CALL  fork()
 27872 sh       RET   fork 32282/0x7e1a
 27872 sh       CALL  sigprocmask(0x3,0)
 27872 sh       RET   sigprocmask 524288/0x80000
 27872 sh       CALL  dup2(0xd,0x1)
 27872 sh       RET   dup2 1
 27872 sh       CALL  close(0xd)
 27872 sh       RET   close 0
 27872 sh       CALL  sigprocmask(0x1,0x80000)
 27872 sh       RET   sigprocmask 0
 27872 sh       CALL  sigprocmask(0x3,0)
 27872 sh       RET   sigprocmask 524288/0x80000
 27872 sh       CALL  read(0xb,0x8b092838,0x200)
 27872 sh       GIO   fd 11 read 10 bytes
       "apachectl
       "
 27872 sh       RET   read 10/0xa
 27872 sh       CALL  read(0xb,0x8b092838,0x200)
 27872 sh       PSIG  SIGCHLD caught handler=0x1c01bc74 mask=0x0
 27872 sh       RET   read -1 errno 4 Interrupted system call
 27872 sh       CALL  getrusage(0xffffffff,0xcfbce918)
 27872 sh       RET   getrusage 0
 27872 sh       CALL  wait4(0xffffffff,0xcfbce8c4,0x3,0)
 27872 sh       RET   wait4 32282/0x7e1a
 27872 sh       CALL  getrusage(0xffffffff,0xcfbce8c8)
 27872 sh       RET   getrusage 0
 27872 sh       CALL  wait4(0xffffffff,0xcfbce8c4,0x3,0)
 27872 sh       RET   wait4 -1 errno 10 No child processes
 27872 sh       CALL  sigreturn(0xcfbce9c8)
 27872 sh       RET   sigreturn JUSTRETURN
 27872 sh       CALL  read(0xb,0x8b092838,0x200)
 27872 sh       RET   read 0
 27872 sh       CALL  close(0xb)
 27872 sh       RET   close 0
 27872 sh       CALL  sigprocmask(0x1,0x80000)
 27872 sh       RET   sigprocmask 0
 27872 sh       CALL  sigprocmask(0x3,0)
 27872 sh       RET   sigprocmask 524288/0x80000
 27872 sh       CALL  write(0x2,0x84c10408,0x12)
 27872 sh       GIO   fd 2 wrote 18 bytes
       "+ BNAME=apachectl
       "
 27872 sh       RET   write 18/0x12
 27872 sh       CALL  write(0x2,0x84c10408,0x4a)
 27872 sh       GIO   fd 2 wrote 74 bytes
       "+ echo usage: apachectl [ start | startssl | stop | restart | graceful\
	 | 
       "
 27872 sh       RET   write 74/0x4a
 27872 sh       CALL  write(0x1,0x8b476208,0x43)
 27872 sh       GIO   fd 1 wrote 67 bytes
       "usage: apachectl [ start | startssl | stop | restart | graceful | 
       "
 27872 sh       RET   write 67/0x43
 27872 sh       CALL  write(0x2,0x84c10408,0x44)
 27872 sh       GIO   fd 2 wrote 68 bytes
       "+ echo                    status | fullstatus | configtest | help ]
       "
 27872 sh       RET   write 68/0x44
 27872 sh       CALL  write(0x1,0x8b476208,0x3d)
 27872 sh       GIO   fd 1 wrote 61 bytes
       "                   status | fullstatus | configtest | help ]
       "
 27872 sh       RET   write 61/0x3d
 27872 sh       CALL  write(0x2,0x84c10408,0x6)
 27872 sh       GIO   fd 2 wrote 6 bytes
       "+ cat
       "
 27872 sh       RET   write 6
 27872 sh       CALL  write(0x2,0x84c10408,0xa)
 27872 sh       GIO   fd 2 wrote 10 bytes
       "+ << EOF 
       "
 27872 sh       RET   write 10/0xa
 27872 sh       CALL  getpid()
 27872 sh       RET   getpid 27872/0x6ce0
 27872 sh       CALL  __sysctl(545005683.1819047270,0xcfbce980,0xcfbce974,0,0)
 27872 sh       RET   __sysctl 0
 27872 sh       CALL  getpid()
 27872 sh       RET   getpid 27872/0x6ce0
 27872 sh       CALL  getpid()
 27872 sh       RET   getpid 27872/0x6ce0
 27872 sh       CALL  getpid()
 27872 sh       RET   getpid 27872/0x6ce0
 27872 sh       CALL  stat(0x85e31f9c,0xcfbcea80)
 27872 sh       NAMI  "/tmp"
 27872 sh       RET   stat 0
 27872 sh       CALL  open(0x85e31f9c,0xa02,0x180)
 27872 sh       NAMI  "/tmp/shWoz27872"
 27872 sh       RET   open 3
 27872 sh       CALL  open(0x85e31f9c,0,0)
 27872 sh       NAMI  "/tmp/shWoz27872"
 27872 sh       RET   open 4
 27872 sh       CALL  mmap(0,0x1000,0x3,0x1002,0xffffffff,0,0,0)
 27872 sh       RET   mmap 2143514624/0x7fc37000
 27872 sh       CALL  mmap(0,0x1000,0x3,0x1002,0xffffffff,0,0,0)
 27872 sh       RET   mmap 2122788864/0x7e873000
 27872 sh       CALL  write(0x3,0x8b092838,0x1ed)
 27872 sh       GIO   fd 3 wrote 493 bytes
       "
	start      - start httpd
	startssl   - start httpd with SSL enabled
	stop       - stop httpd
	restart    - restart httpd if running by sending a SIGHUP or start if 
	             not running
	graceful   - do a graceful restart by sending a SIGUSR1 or start if no\
	t running
	status     - dump a short status screen; requires lynx and mod_status \
	enabled
	fullstatus - dump a full status screen; requires lynx and mod_status e\
	nabled
	configtest - do a configuration syntax test
	help       - this screen
	
       "
 27872 sh       RET   write 493/0x1ed
 27872 sh       CALL  close(0x3)
 27872 sh       RET   close 0
 27872 sh       CALL  fcntl(0,0,0xa)
 27872 sh       RET   fcntl 11/0xb
 27872 sh       CALL  fcntl(0xb,0x2,0x1)
 27872 sh       RET   fcntl 0
 27872 sh       CALL  dup2(0x4,0)
 27872 sh       RET   dup2 0
 27872 sh       CALL  close(0x4)
 27872 sh       RET   close 0
 27872 sh       CALL  stat(0x8b476208,0xcfbceb10)
 27872 sh       NAMI  "/sbin/cat"
 27872 sh       RET   stat -1 errno 2 No such file or directory
 27872 sh       CALL  stat(0x8b476208,0xcfbceb10)
 27872 sh       NAMI  "/usr/sbin/cat"
 27872 sh       RET   stat -1 errno 2 No such file or directory
 27872 sh       CALL  stat(0x8b476208,0xcfbceb10)
 27872 sh       NAMI  "/bin/cat"
 27872 sh       RET   stat 0
 27872 sh       CALL  access(0x8b476208,0x1)
 27872 sh       NAMI  "/bin/cat"
 27872 sh       RET   access 0
 27872 sh       CALL  sigprocmask(0x1,0x80000)
 27872 sh       RET   sigprocmask 0
 27872 sh       CALL  fork()
 27872 sh       RET   fork 19032/0x4a58
 27872 sh       CALL  sigsuspend(0)
 27872 sh       PSIG  SIGCHLD caught handler=0x1c01bc74 mask=0x80000
 27872 sh       RET   sigsuspend -1 errno 4 Interrupted system call
 27872 sh       CALL  getrusage(0xffffffff,0xcfbcea38)
 27872 sh       RET   getrusage 0
 27872 sh       CALL  wait4(0xffffffff,0xcfbce9e4,0x3,0)
 27872 sh       RET   wait4 19032/0x4a58
 27872 sh       CALL  getrusage(0xffffffff,0xcfbce9e8)
 27872 sh       RET   getrusage 0
 27872 sh       CALL  wait4(0xffffffff,0xcfbce9e4,0x3,0)
 27872 sh       RET   wait4 -1 errno 10 No child processes
 27872 sh       CALL  sigreturn(0xcfbceae8)
 27872 sh       RET   sigreturn JUSTRETURN
 27872 sh       CALL  sigprocmask(0x3,0)
 27872 sh       RET   sigprocmask 524288/0x80000
 27872 sh       CALL  dup2(0xb,0)
 27872 sh       RET   dup2 0
 27872 sh       CALL  close(0xb)
 27872 sh       RET   close 0
 27872 sh       CALL  unlink(0x85e31f9c)
 27872 sh       NAMI  "/tmp/shWoz27872"
 27872 sh       RET   unlink 0
 27872 sh       CALL  write(0x2,0x84c10408,0xa)
 27872 sh       GIO   fd 2 wrote 10 bytes
       "+ ERROR=2
       "
 27872 sh       RET   write 10/0xa
 27872 sh       CALL  write(0x2,0x84c10408,0x9)
 27872 sh       GIO   fd 2 wrote 9 bytes
       "+ exit 2
       "
 27872 sh       RET   write 9
 27872 sh       CALL  sigprocmask(0x1,0x80000)
 27872 sh       RET   sigprocmask 0
 27872 sh       CALL  sigprocmask(0x3,0)
 27872 sh       RET   sigprocmask 524288/0x80000
 27872 sh       CALL  munmap(0x889c9000,0x1000)
 27872 sh       RET   munmap 0
 27872 sh       CALL  exit(0x2)