AVM_Ar7 >go AVM decompress Kernel: .............done start kernel [ar7_pre_init] PERIPHERAL Clk = 62500000 Hz baud=102 LINUX started... [ar7_setup] [ar7_serial_init] [ar7_serial_init] done Linux version 2.6.13.1-ar7 (oliver@oliver-desktop) (gcc version 3.4.5) #1 Tue Ma y 1 13:48:24 CEST 2007 memsize=32 MByte flashsize=4 MByte &_end=0x9421f774 PFN_ALIGN(&_end)=0x94220000 CPHYSADDR(PFN_ALIGN(&_end))=0x14220 000 memsize=0x2000000 CPU revision is: 00018448 [ar7_clk_init]: dsl xtal 25000000Hz lan xtal 25000000Hz [ar7_gpio_init] Determined physical RAM map: memory: 00220000 @ 14000000 (reserved) memory: 01de0000 @ 14220000 (usable) On node 0 totalpages: 8192 [alloc_node_mem_map] reduce size from 2883616 Bytes to 262176 Bytes [alloc_node_mem_map]: (org) sizeof(mem_map) = 262176 mem_map=0x94223000-0x942630 20 [alloc_node_mem_map]: sizeof(mem_map) = 2883616 mem_map=0x93fa3000-0x94263020 zone=0 zone_size[j]=0x90112 realsize=8192 DMA zone: 8192 pages, LIFO batch:3 zone=1 zone_size[j]=0x0 realsize=0 Normal zone: 0 pages, LIFO batch:1 zone=2 zone_size[j]=0x0 realsize=0 HighMem zone: 0 pages, LIFO batch:1 Built 1 zonelists Kernel command line: mini_fo=tmpfs console=ttyS0,38400n8r [ld_mmu_r4xx0] memcpy((void *)(CAC_BASE + 0x100), &except_vec2_generic, 0x30) Primary instruction cache 16kB, physically tagged, 4-way, linesize 16 bytes. Primary data cache 16kB, 4-way, linesize 16 bytes. Synthesized TLB refill handler (20 instructions). Base=0x941f47ac TLB synthesizer field overflow (simm) Synthesized TLB load handler fastpath (34 instructions) Base=0x941f7580. TLB synthesizer field overflow (simm) Synthesized TLB store handler fastpath (34 instructions) Base=0x941f7780. TLB synthesizer field overflow (simm) Synthesized TLB modify handler fastpath (33 instructions) Base=0x941f7980. PID hash table entries: 256 (order: 8, 4096 bytes) CPU frequency 150.00 MHz Using 75.000 MHz high precision timer. [setup_irq]: irq 127 irqaction->handler 0x94041a70 (no_action+0x0/0x8 ) [register_console] enable commandline console 0 Dentry cache hash table entries: 8192 (order: 3, 32768 bytes) Inode-cache hash table entries: 4096 (order: 2, 16384 bytes) Memory: 30208k/30592k available (1536k kernel code, 320k reserved, 355k data, 11 2k init, 0k highmem) totalram_pages= 7568 Calibrating delay loop... 149.50 BogoMIPS (lpj=747520) loops_per_jiffy=747520 Mount-cache hash table entries: 512 Checking for 'wait' instruction... available. NET: Registered protocol family 16 Can't analyze prologue code at 9417e920 Squashfs 2.2-r2b (released 2006/02/23) (C) 2002-2005 Phillip Lougher Initializing Cryptographic API [avm_power]Sangam 7300 or 7300A (> 2.3 but not 5.7 possible overclock) detected rev=57 [avm] configured: watchdog eventled enable direct gpio AR7WDT: Watchdog Driver for AR7 Hardware (Version 1.0, build: May 1 2007 13:48: 00) Serial: 8250/16550 driver $Revision: 1.90 $ 1 ports, IRQ sharing disabled [uart_add_one_port] ttyS0 at MMIO 0x0 (irq = 15) is a OHIO_UART [uart_add_one_port] dont register console port->type = 16 port->cons = 0x941b9a90 port->cons->flags = 0x7 [uart_add_one_port] success io scheduler noop registered [cpmac] cpmac_if_register, dev eth0 (phy_id 0) registered tun: Universal TUN/TAP device driver, 1.6 tun: (C) 1999-2004 Max Krasnyansky physmap flash device: 400000 at 10000000 [mtd_do_chip_probe] map 941bb260 [genprobe_ident_chips] map name phys_mapped_flash [genprobe_new_chip] map 0x941bb260 map->size 0x400000 map->name phys_mapped_flas h [genprobe_new_chip] min_chips 1 max_chips 2 [genprobe_new_chip] cfi->interleave 1 [genprobe_new_chip] map_bankwidth 2 type 2 [genprobe_new_chip] call probe_chip phys_mapped_flash: Found 1 x16 devices at 0x0 in 16-bit bank [genprobe_ident_chips] cfi.cfiq->DevSize 22 [genprobe_ident_chips] 3 cfi.numchips 1 max_chips 1 [genprobe_ident_chips] 4 i 0 j 0 [genprobe_ident_chips] 5 i 0 j 1 [mtd_do_chip_probe] check_cmd_set Amd/Fujitsu Extended Query Table at 0x0040 phys_mapped_flash: Swapping erase regions for broken CFI table. number of CFI chips: 1 cfi_cmdset_0002: Disabling erase-suspend-program due to code brokenness. RedBoot partition parsing not available Generic platform RAM MTD, (c) 2004 Simtec Electronics Ohio flash driver (size->0x400000 mem->0x10000000) flash_size=0x400000 [mtd_do_chip_probe] map 941bb364 [genprobe_ident_chips] map name AR7 flash memory [genprobe_new_chip] map 0x941bb364 map->size 0x400000 map->name AR7 flash memory [genprobe_new_chip] min_chips 1 max_chips 2 [genprobe_new_chip] cfi->interleave 1 [genprobe_new_chip] map_bankwidth 2 type 2 [genprobe_new_chip] call probe_chip AR7 flash memory: Found 1 x16 devices at 0x0 in 16-bit bank [genprobe_ident_chips] cfi.cfiq->DevSize 22 [genprobe_ident_chips] 3 cfi.numchips 1 max_chips 1 [genprobe_ident_chips] 4 i 0 j 0 [genprobe_ident_chips] 5 i 0 j 1 [mtd_do_chip_probe] check_cmd_set Amd/Fujitsu Extended Query Table at 0x0040 AR7 flash memory: Swapping erase regions for broken CFI table. number of CFI chips: 1 cfi_cmdset_0002: Disabling erase-suspend-program due to code brokenness. [mtd]: jffs2_size = 6 * 64KByte (0x60000 Bytes) ohio_flash_map.virt 0xb0000000 ohio_ram_map.virt 0x00000000 [ohio_find_hidden_filesystem] start=0x10000 end=0x3c0000 size=0x3b0000 [ohio_find_hidden_filesystem] start_virt=0xb0000000 [ohio_find_hidden_filesystem]: super block found: bytes_used: 0x2af01b/2813979 [init_ohio_flash] find hidden filesystem size=0x30f200 offset=0xb0e00 [mtd] configure jffs2 partition [mtd] fs_size=0x350000 max=0x60000 is=0x60000 max jffs2_size value 6 [mtd] ohio_flash_map: name=AR7 flash memory bankwidth=2 virt=0xb0000000 phys=0x1 0000000 size=0x400000 partition_info[0]: name=filesystem offset=b0e00 size=30f200 partition_info[1]: name=kernel offset=10000 size=3b0000 partition_info[2]: name=bootloader offset=0 size=10000 partition_info[3]: name=tffs (1) offset=3c0000 size=20000 partition_info[4]: name=tffs (2) offset=3e0000 size=20000 partition_info[5]: name=jffs2 offset=360000 size=60000 partition_info[6]: name=Kernel without jffs2 offset=10000 size=350000 Creating 7 MTD partitions on "AR7 flash memory": 0x000b0e00-0x003c0000 : "filesystem" 'nor-flash' 'Bits can be cleared (flash)' 'Has an erase function' mtd: partition "filesystem" doesn't start on an erase block boundary -- force re ad-only 0x00010000-0x003c0000 : "kernel" 'nor-flash' 'Bits can be cleared (flash)' 'Has an erase function' 0x00000000-0x00010000 : "bootloader" 'nor-flash' 'Bits can be cleared (flash)' 'Has an erase function' 'Virtual blocks not allowed' 0x003c0000-0x003e0000 : "tffs (1)" 'nor-flash' 'Bits can be cleared (flash)' 'Has an erase function' 'Virtual blocks not allowed' 0x003e0000-0x00400000 : "tffs (2)" 'nor-flash' 'Bits can be cleared (flash)' 'Has an erase function' 'Virtual blocks not allowed' 0x00360000-0x003c0000 : "jffs2" 'nor-flash' 'Bits can be cleared (flash)' 'Has an erase function' 'Virtual blocks not allowed' 0x00010000-0x00360000 : "Kernel without jffs2" 'nor-flash' 'Bits can be cleared (flash)' 'Has an erase function' 'Virtual blocks not allowed' NET: Registered protocol family 2 IP route cache hash table entries: 512 (order: -1, 2048 bytes) TCP established hash table entries: 2048 (order: 2, 16384 bytes) TCP bind hash table entries: 2048 (order: 1, 8192 bytes) TCP: Hash tables configured (established 2048 bind 2048) TCP reno registered TCP bic registered mcfw: IGMPv3 fast forwarding NET: Registered protocol family 1 NET: Registered protocol family 17 NET: Registered protocol family 8 NET: Registered protocol family 20 802.1Q VLAN Support v1.8 Ben Greear All bugs added by David S. Miller [setup_irq]: irq 1 irqaction->handler 0x94001590 (dummy_timer_irq+0x0/0x14 ) [setup_irq]: irq 6 irqaction->handler 0x940015a4 (dummy_system_irq_2+0x0/0x1c ) [ar7_late_init] [tffs] alloc_chrdev_region() param=mtd4 [tffs] CONFIG_TFFS_MTD_DEVICE_0=4 CONFIG_TFFS_MTD_DEVICE_1=5 [tffs] Character device init successfull TFFS: tiny flash file system driver. GPL (c) AVM Berlin (Version 2.0) mount on mtd4 and mtd5 (double buffering) Adam2 environment variables API installed. [prepare_namespace] new mount root /dev/mtdblock1 tffsd: wait for events use lzma compression VFS: Mounted root (squashfs filesystem) readonly. Freeing prom memory: 0kb freed Freeing unused kernel memory: 112k freed (7596 free) [setup_irq]: irq 15 irqaction->handler 0x940d510c (serial8250_interrupt+0x0/0x13 c ) [setup_irq]: irq 15 irqaction->handler 0x940d510c (serial8250_interrupt+0x0/0x13 c ) [setup_irq]: irq 15 irqaction->handler 0x940d510c (serial8250_interrupt+0x0/0x13 c ) init started: BusyBox v1.4.1 (2007-04-27 23:13:49 CEST) multi-call binary [setup_irq]: irq 15 irqaction->handler 0x940d510c (serial8250_interrupt+0x0/0x13 c ) + start + ps + grep inotifywait + grep -v grep + echo starting inotifywait starting inotifywait + sleep 3 /etc/init.d/rc.mini_fo: /etc/init.d/rc.mini_fo: 1: cannot create /var/iw.log: Re ad-only file system + inotifywait -c -r -m / @/dev @/proc @/var @/rom @/sto --exclude busybox|uClibc |libcrypt-0 + mounted_proc=0 + [ ! -e /proc/mounts ] + echo *** Mounting proc-fs. *** *** Mounting proc-fs. *** + mount proc + mounted_proc=1 + grep / mini_fo /proc/mounts + echo *** Switching to mini_fo-root ... *** *** Switching to mini_fo-root ... *** + set -e + modprobe mini_fo Registering mini_fo version $Id$ + grep mini_fo=jffs2 /proc/sys/urlader/environment TFFS Name Table 9 + mount -t tmpfs none /data + mount -t mini_fo -o base=/,sto=/data / /var mini_fo: using base directory: / mini_fo: using storage directory: /data + cd /var + mkdir rom + pivot_root . rom + sleep 1 + ps + grep inotifywait + grep -v grep + echo starting inotifywait starting inotifywait + inotifywait -c -r -m / @/dev @/proc @/var @/rom @/sto --exclude busybox|uClibc |libcrypt-0 + sleep 3 + kill -1 1 + exit 0 [setup_irq]: irq 15 irqaction->handler 0x940d510c (serial8250_interrupt+0x0/0x13 c ) The system is going down NOW !! [setup_irq]: irq 15 irqaction->handler 0x940d510c (serial8250_interrupt+0x0/0x13 c ) Sending SIGTERM to all processes. [setup_irq]: irq 15 irqaction->handler 0x940d510c (serial8250_interrupt+0x0/0x13 c ) Sending SIGKILL to all processes. [setup_irq]: irq 15 irqaction->handler 0x940d510c (serial8250_interrupt+0x0/0x13 c ) [setup_irq]: irq 15 irqaction->handler 0x940d510c (serial8250_interrupt+0x0/0x13 c ) [setup_irq]: irq 15 irqaction->handler 0x940d510c (serial8250_interrupt+0x0/0x13 c ) init started: BusyBox v1.4.1 (2007-04-27 23:13:49 CEST) multi-call binary [setup_irq]: irq 15 irqaction->handler 0x940d510c (serial8250_interrupt+0x0/0x13 c ) + start + ps + grep inotifywait + grep -v grep + echo starting inotifywait starting inotifywait + inotifywait -c -r -m / @/dev @/proc @/var @/rom @/sto --exclude busybox|uClibc |libcrypt-0 + sleep 3 + mounted_proc=0 + [ ! -e /proc/mounts ] + echo *** Mounting proc-fs. *** *** Mounting proc-fs. *** + mount proc + mounted_proc=1 + grep / mini_fo /proc/mounts + mount -o move /rom/data /data + umount /rom/proc + [ 1 = 1 ] + umount proc + echo *** Already running from mini_fo, done. *** *** Already running from mini_fo, done. *** + ps + grep inotifywait + grep -v grep + echo starting inotifywait starting inotifywait + inotifywait -c -r -m / @/dev @/proc @/var @/rom @/sto --exclude busybox|uClibc |libcrypt-0 + sleep 3 + exit [setup_irq]: irq 15 irqaction->handler 0x940d510c (serial8250_interrupt+0x0/0x13 c ) mount: mounting sysfs on /var/sysfs failed rootdir=/ table='/etc/device.table' AR7WDT: System Init UEberwachung 120 Sekunden HWRevision 58 ProductID Fritz_Box_WLAN SerialNumber 0000000000000000 annex B autoload yes ... set 'Activate Wizzard' mknod: /var/flash/ar7.cfg: File exists Loading /var/flash/ds_mod...done. Loading passwords...done. Loading hosts...done. Loading config...done. Loading modules...done. cp /etc/default.049/fx_moh.default /var/fx_moh attempting to load DSL Firmware '/lib/modules/ar0700xx.bin' **** ANNEX: 'B' ************************************* setting DSL Firmware to Annex B tiatm: module license ' (C) Copyright 2003, Texas Instruments, Inc (C) Copyright 2004, AVM ' taints kernel. registered device TI Avalanche SAR tiatm driver (patch_annex=0xc00793ec) Sangam detected [tiatm] Set StrictPriority=0 PM_STATUS2(before switch on) = 0x03 12 Volt:up korrekt 1.5 Volt: up korrekt Fuse Mode is disabled PM_STATUS2(after switch on) = 0x03 12 Volt:up korrekt 1.5 Volt: up korrekt Fuse Mode is disabled power up success ! #### DSP Core voltage set to 1,5 V #### DSP binary filesize = 263376 bytes [setup_irq]: irq 23 irqaction->handler 0xc0060208 (tn7atm_sar_irq+0x0/0x30 [tiatm] ) [setup_irq]: irq 47 irqaction->handler 0xc0060238 (tn7atm_dsl_irq+0x0/0x28 [tiatm] ) [tiatm]: Powermanagment (States => 1,3,10) supported! Texas Instruments ATM driver: version:[4.06.04.41] [capi_oslib] avm_stack_attach [capi_oslib] driver params overwritten io_addr=0xbc000000 irq_num=9 Loading... isdn_oslib: Driver 'isdn_oslib' attached to stack CAPI driver registered. AVM F!Box expected @ port 0xbc000000, irq 9 Loading... isdn_oslib: Stack version 3.11-07 isdn_oslib: D-channel 0: DSS1 isdn_oslib: D-channel 1: DSS1 isdn_oslib: D-channel 2: POTS isdn_oslib: D-channel 3: SIP [setup_irq]: irq 9 irqaction->handler 0x94103b68 (irq_handler+0x0/0xbc ) [CAPI-DRIVER-IRQ] irq: 9 successfully registred gpio_dataonly_test: 0 gpio_ssi_init: done 4 DUSLIC_SlotsAvail DuSlic reseted Slot0 LM_INT=0x2 0xa2 (414) Slot0 LMstopped 0x0 0x58 (17) Slot0 LM_INT=0x2 0xa0 (407) Slot0 LMstopped 0x0 0x58 (16) Slot0 LM_INT=0x0 0xb8 (407) IT_RING_OK Slot0 LMstopped 0x0 0x1a (17) Slot0 LM_INT=0x2 0xfe (407) IT_TIP_OK Slot0 LMstopped 0x0 0x65 (12) Slot0 LM=0xe0 0x14 (0) TIP=-56V Slot0 LM=0x3 0xbb (75) TIP0V=-5V Slot0 LM=0x8 0x30 (133) TIPLOOP=-13V Slot0 LM=0x12 0x88 (0) Slot1 LM_INT=0x3 0xc3 (417) Slot1 LMstopped 0x0 0x7f (17) Slot1 LM_INT=0x3 0xc1 (407) Slot1 LMstopped 0x0 0x96 (16) Slot1 LM_INT=0x5 0x6d (407) IT_RING_OK Slot1 LMstopped 0x0 0xbb (16) Slot1 LM_INT=0x3 0x57 (408) IT_TIP_OK Slot1 LMstopped 0xff 0x54 (11) Slot1 LM=0xdf 0x91 (0) TIP=-57V Slot1 LM=0x3 0x20 (68) TIP0V=-4V Slot1 LM=0x8 0x39 (123) TIPLOOP=-13V Slot1 LM=0x13 0x2f (0) Slot2 Found NO_SLIC Slot3 Found POTS_SLIC Max_Usable_XSC: 4 DuSlic reseted Slot 3: used as POTS_SLIC V23 FSK SW-Workaround_D! Loaded. modprobe: module avalanche_usb not found modprobe: failed to load module avalanche_usb kdsldmod: Unknown symbol set_avm_recvhook insmod: cannot insert '/lib/modules/2.6.13.1-ar7/kernel/drivers/dsld/kdsldmod.ko': Success (2): Success modprobe: failed to load module kdsldmod Jan 1 01:00:36 cltmgr[669]: Couldn't load shared library libavmssl.so - File not found - Success (0) Jan 1 01:00:36 cltmgr[669]: process priority is 19 Jan 1 01:00:37 websrv[677]: Couldn't load shared library libavmssl.so - File not found - Success (0) Jan 1 01:00:37 igdd[682]: Couldn't load shared library libavmssl.so - File not found - Success (0) Jan 1 01:00:38 websrv[677]: startup (Feb 24 2007 08:03:08) Jan 1 01:00:38 cltmgr[671]: dlopen(/usr/share/ctlmgr/libdect.so) failed: File not found Jan 1 01:00:38 cltmgr[671]: dlopen(/usr/share/ctlmgr/libtamconf.so) failed: File not found Jan 1 01:00:38 cltmgr[671]: dlopen(/usr/share/ctlmgr/libvdsl.so) failed: File not found [avm_power] : ethernet not registered [avm_power] : ethernet not registered [avm_power] : ethernet not registered Jan[avm_power] : ethernet not registered 1 01:00:38 cltmgr[671]: dlopen(/usr/share/ctlmgr/libmini.so) failed: File notfound Jan 1 01:00:38 cltmgr[671]: mapping to info-LED already exist Jan 1 01:00:38 cltmgr[671]: box init ok [tiatm] DSL in training! Jan 1 01:00:39 cltmgr[671]: /dev/avm_power <-- MODE=ata Jan 1 01:00:39 cltmgr[671]: WAN (ata) led value = 1 Jan 1 01:00:39 cltmgr[671]: 0.0.0.0:2048: SIOCGET_TC_INDEX failed - Invalid argument (22) Jan 1 01:00:39 cltmgr[671]: TR069_Init() returned -1 Jan 1 01:00:39 cltmgr[671]: verbose: DISABLED Jan 1 01:00:39 multid[689]: startup (Feb 24 2007 08:03:26) Jan 1 01:00:39 multid[689]: Couldn't load shared library libavmssl.so - File not found - Bad file descriptor (9) Jan 1 01:00:39 multid[691]: 0.0.0.0:2049: SIOCGET_TC_INDEX failed - Invalid argument (22) Jan 1 01:00:39 multid[691]: if_clearip[cpmac] cpmac_main_ioctl, unknown ioctl 35142 adddevice eth0 entered promiscuous mode r: [setup_irq]: irq 27 irqaction->handler 0x940e5b7c (lacpmac_main_isr+0x0/0x78n:) 0: SIOCSIFADlan: port 1(eth0) entering learning state DRlan: topology change detected, propagating flan: port 1(eth0) entering forwarding state ailed - No such device (19) Jan 1 01:00:39 multid[691]: mrouter: using IGMPv3 for upstream interface eth0 Jan 1 01:00:39 multid[691]: mrouter: using IGMPv3 for other interfaces Jan 1 01:00:39 multid[691]: DHCPD on lan:0 skipped, is virtual interface Jan 1 01:00:39 multid[691]: DDNS: bigraph.mine.nu Jan 1 01:00:39 multid[691]: DDNS: 1 accounts Jan 1 01:00:39 multid[691]: interface eth0 new. Jan 1 01:00:39 multid[691]: interface lo new. Jan 1 01:00:39 multid[691]: interface lo up. Jan 1 01:00:39 multid[691]: mrouter: lo: no multicast interface, ignored. Jan 1 01:00:39 multid[691]: verbose: DISABLED Jan 1 01:00:40 dsld[696]: Couldn't load shared library libavmssl.so - File not found - No such file or directory (2) Jan 1 01:00:40 dsld[696]: startup (Feb 24 2007 08:03:55) Jan 1 01:00:40 dsld[696]: no need to run, exit (ipclient) telefon: use clock_gettime(CLOCK_MONOTONIC)! telefon: SIGCHLD received! telefon: kein Capi! voipd: Couldn't load shared library libavmssl.so - File not found - Success (0) /etc/init.d/rc.voip: /etc/init.d/rc.voip: 74: pbd: not found Jan 1 01:00:42 multid[691]: 0.0.0.0:2051: SIOCSET_TC_INDEX failed - Invalid argument (22) Jan 1 01:00:42 multid[691]: 0.0.0.0:2049: SIOCSET_TC_INDEX failed - Invalid argument (22) Jan 1 01:00:42 voipd[717]: startup (AVM FRITZ!Box Fon 06.04.30 AVM SIP v6.02.06 Feb 28 2007 12:04:44) May 4 17:53:28 voipd[717]: 0.0.0.0:7077: SIOCGET_TC_INDEX failed - Invalid argument (22) May 4 17:53:28 voipd[717]: Warning: CAPI_GET_PROFILE failed - 0x1109 May 4 17:53:28 voipd[717]: INFO led: off (value=0) May 4 17:53:28 voipd[717]: INTERNET led value = 0 May 4 17:53:28 voipd[717]: DEBUG: exit: 0 entries freed run_clock demon started AR7WDT: System Init UEberwachung abgeschlossen (97450 ms noch verfuegbar) SysRq : Changing Loglevel Loglevel set to 4 rc.mod version ds26-14.4 crond is disabled Starting telnetd...done. Starting webinterface...done. firewall is disabled Starting syslogd...done. Starting ssh server...done. + start + ps + grep inotifywait + grep -v grep + echo starting inotifywait starting inotifywait + inotifywait -c -r -m / @/dev @/proc @/var @/rom @/sto --exclude busybox|uClibc|libcrypt-0 + sleep 3 + mounted_proc=0 + [ ! -e /proc/mounts ] + echo mini_fo already started. mini_fo already started. + exit Setting up virtual network interface ... done. Please press Enter to activate this console.