Linux version 2.6.18-4-486 (Debian 2.6.18.dfsg.1-12etch1) (dannf@debian.org) (gcc version 4.1.2 20061115 (prerelease) (Debian 4.1.1-21)) #1 Wed Apr 18 09:13:09 UTC 2007 BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 000000001efc0000 (usable) BIOS-e820: 000000001efc0000 - 000000001efcf000 (ACPI data) BIOS-e820: 000000001efcf000 - 000000001f000000 (ACPI NVS) BIOS-e820: 00000000fed14000 - 00000000fed1a000 (reserved) BIOS-e820: 00000000fed1c000 - 00000000fed20000 (reserved) BIOS-e820: 00000000ffb80000 - 0000000100000000 (reserved) 495MB LOWMEM available. found SMP MP-table at 000ff780 On node 0 totalpages: 126912 DMA zone: 4096 pages, LIFO batch:0 Normal zone: 122816 pages, LIFO batch:31 DMI 2.3 present. ACPI: RSDP (v000 ACPIAM ) @ 0x000f7130 ACPI: RSDT (v001 A M I OEMRSDT 0x01000624 MSFT 0x00000097) @ 0x1efc0000 ACPI: FADT (v002 A M I OEMFACP 0x01000624 MSFT 0x00000097) @ 0x1efc0200 ACPI: MADT (v001 A M I OEMAPIC 0x01000624 MSFT 0x00000097) @ 0x1efc0390 ACPI: MCFG (v001 A M I OEMMCFG 0x01000624 MSFT 0x00000097) @ 0x1efc03f0 ACPI: OEMB (v001 A M I AMI_OEM 0x01000624 MSFT 0x00000097) @ 0x1efcf040 ACPI: SSDT (v001 AMI CPU1PM 0x00000001 INTL 0x02002026) @ 0x1efc8f40 ACPI: DSDT (v001 0AAAA 0AAAA000 0x00000000 INTL 0x02002026) @ 0x00000000 ACPI: PM-Timer IO Port: 0x808 ACPI: Local APIC address 0xfee00000 ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) Processor #0 6:13 APIC version 20 ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0]) IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23 ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) ACPI: IRQ0 used by override. ACPI: IRQ2 used by override. ACPI: IRQ9 used by override. Enabling APIC mode: Flat. Using 1 I/O APICs Using ACPI (MADT) for SMP configuration information Allocating PCI resources starting at 20000000 (gap: 1f000000:dfd14000) Detected 1596.088 MHz processor. Built 1 zonelists. Total pages: 126912 Kernel command line: root=/dev/hda4 ro mapped APIC to ffffd000 (fee00000) mapped IOAPIC to ffffc000 (fec00000) Enabling fast FPU save and restore... done. Enabling unmasked SIMD FPU exception support... done. Initializing CPU#0 PID hash table entries: 2048 (order: 11, 8192 bytes) Console: colour VGA+ 80x25 Dentry cache hash table entries: 65536 (order: 6, 262144 bytes) Inode-cache hash table entries: 32768 (order: 5, 131072 bytes) Memory: 495824k/507648k available (1502k kernel code, 11236k reserved, 601k data, 256k init, 0k highmem) Checking if this processor honours the WP bit even in supervisor mode... Ok. Calibrating delay using timer specific routine.. 3194.69 BogoMIPS (lpj=6389397) Security Framework v1.0.0 initialized SELinux: Disabled at boot. Capability LSM initialized Mount-cache hash table entries: 512 CPU: After generic identify, caps: afe9fbbf 00000000 00000000 00000000 00000180 00000000 00000000 CPU: After vendor identify, caps: afe9fbbf 00000000 00000000 00000000 00000180 00000000 00000000 CPU: L1 I cache: 32K, L1 D cache: 32K CPU: L2 cache: 2048K CPU: After all inits, caps: afe9fbbf 00000000 00000000 00000040 00000180 00000000 00000000 Compat vDSO mapped to ffffe000. CPU: Intel(R) Pentium(R) M processor 1.60GHz stepping 06 Checking 'hlt' instruction... OK. ACPI: Core revision 20060707 ENABLING IO-APIC IRQs ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1 checking if image is initramfs... it is Freeing initrd memory: 4248k freed NET: Registered protocol family 16 EISA bus registered ACPI: bus type pci registered PCI: BIOS Bug: MCFG area at e0000000 is not E820-reserved PCI: Not using MMCONFIG. PCI: PCI BIOS revision 2.10 entry at 0xf0031, last bus=2 PCI: Using configuration type 1 Setting up standard PCI resources ACPI: Interpreter enabled ACPI: Using IOAPIC for interrupt routing ACPI: PCI Root Bridge [PCI0] (0000:00) PCI: Probing PCI hardware (bus 00) Boot video device is 0000:00:02.0 PCI quirk: region 0800-087f claimed by ICH6 ACPI/GPIO/TCO PCI quirk: region 0480-04bf claimed by ICH6 GPIO PCI: Ignoring BAR0-3 of IDE controller 0000:00:1f.1 PCI: Transparent bridge - 0000:00:1e.0 PCI: Bus #02 (-#05) is hidden behind transparent bridge #01 (-#02) (try 'pci=assign-busses') Please report the result to linux-kernel to fix this permanently ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT] ACPI: Embedded Controller [EC0] (gpe 28) interrupt mode. ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 *11 12) ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 12) *11 ACPI: PCI Interrupt Link [LNKC] (IRQs 3 *4 5 6 7 12) ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 *6 7 12) ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 *5 6 7 12) ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 12) *0, disabled. ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 *5 6 7 12) ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 *5 6 7 12) ACPI: Power Resource [GFAN] (off) Linux Plug and Play Support v0.97 (c) Adam Belay pnp: PnP ACPI init pnp: PnP ACPI: found 16 devices PnPBIOS: Disabled by ACPI PNP PCI: Using ACPI for IRQ routing PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report pnp: 00:09: ioport range 0x680-0x68f has been reserved PCI: Ignore bogus resource 6 [0:0] of 0000:00:02.0 PCI: Bus 2, cardbus bridge: 0000:01:01.0 IO window: 0000d000-0000d0ff IO window: 0000d400-0000d4ff PREFETCH window: 20000000-21ffffff MEM window: 22000000-23ffffff PCI: Bridge: 0000:00:1e.0 IO window: d000-dfff MEM window: fe800000-fe8fffff PREFETCH window: 20000000-21ffffff PCI: Setting latency timer of device 0000:00:1e.0 to 64 ACPI: PCI Interrupt 0000:01:01.0[A] -> GSI 17 (level, low) -> IRQ 169 NET: Registered protocol family 2 IP route cache hash table entries: 4096 (order: 2, 16384 bytes) TCP established hash table entries: 16384 (order: 4, 65536 bytes) TCP bind hash table entries: 8192 (order: 3, 32768 bytes) TCP: Hash tables configured (established 16384 bind 8192) TCP reno registered audit: initializing netlink socket (disabled) audit(1178645197.852:1): initialized VFS: Disk quotas dquot_6.5.1 Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) Initializing Cryptographic API io scheduler noop registered io scheduler anticipatory registered io scheduler deadline registered io scheduler cfq registered (default) isapnp: Scanning for PnP cards... isapnp: No Plug & Play device found Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A RAMDISK driver initialized: 16 RAM disks of 8192K size 1024 blocksize PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12 i8042.c: Detected active multiplexing controller, rev 1.1. serio: i8042 AUX0 port at 0x60,0x64 irq 12 serio: i8042 AUX1 port at 0x60,0x64 irq 12 serio: i8042 AUX2 port at 0x60,0x64 irq 12 serio: i8042 AUX3 port at 0x60,0x64 irq 12 serio: i8042 KBD port at 0x60,0x64 irq 1 mice: PS/2 mouse device common for all mice EISA: Probing bus 0 at eisa.0 EISA: Detected 0 cards. TCP bic registered NET: Registered protocol family 1 NET: Registered protocol family 17 NET: Registered protocol family 8 NET: Registered protocol family 20 Using IPI Shortcut mode ACPI: (supports S0 S3 S4 S5) Freeing unused kernel memory: 256k freed Time: tsc clocksource has been installed. ACPI: Transitioning device [FN00] to D3 ACPI: Transitioning device [FN00] to D3 ACPI: Fan [FN00] (off) ACPI: CPU0 (power states: C1[C1] C2[C2]) ACPI: Processor [CPU1] (supports 8 throttling states) ACPI: Thermal Zone [THRM] (47 C) Time: acpi_pm clocksource has been installed. input: AT Translated Set 2 keyboard as /class/input/input0 usbcore: registered new driver usbfs usbcore: registered new driver hub USB Universal Host Controller Interface driver v3.0 ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 23 (level, low) -> IRQ 177 PCI: Setting latency timer of device 0000:00:1d.0 to 64 uhci_hcd 0000:00:1d.0: UHCI Host Controller uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1 uhci_hcd 0000:00:1d.0: irq 177, io base 0x0000e400 usb usb1: configuration #1 chosen from 1 choice hub 1-0:1.0: USB hub found hub 1-0:1.0: 2 ports detected Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx 8139cp: 10/100 PCI Ethernet driver v1.2 (Mar 22, 2004) ieee1394: Initialized config rom entry `ip1394' ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) -> IRQ 185 PCI: Setting latency timer of device 0000:00:1d.1 to 64 uhci_hcd 0000:00:1d.1: UHCI Host Controller uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2 uhci_hcd 0000:00:1d.1: irq 185, io base 0x0000e480 usb usb2: configuration #1 chosen from 1 choice hub 2-0:1.0: USB hub found hub 2-0:1.0: 2 ports detected ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 193 PCI: Setting latency timer of device 0000:00:1d.2 to 64 uhci_hcd 0000:00:1d.2: UHCI Host Controller uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3 uhci_hcd 0000:00:1d.2: irq 193, io base 0x0000e800 usb usb3: configuration #1 chosen from 1 choice hub 3-0:1.0: USB hub found hub 3-0:1.0: 2 ports detected ACPI: PCI Interrupt 0000:00:1d.3[D] -> GSI 16 (level, low) -> IRQ 201 PCI: Setting latency timer of device 0000:00:1d.3 to 64 uhci_hcd 0000:00:1d.3: UHCI Host Controller uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 4 uhci_hcd 0000:00:1d.3: irq 201, io base 0x0000e880 usb usb4: configuration #1 chosen from 1 choice hub 4-0:1.0: USB hub found hub 4-0:1.0: 2 ports detected ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 23 (level, low) -> IRQ 177 PCI: Setting latency timer of device 0000:00:1d.7 to 64 ehci_hcd 0000:00:1d.7: EHCI Host Controller ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 5 ehci_hcd 0000:00:1d.7: debug port 1 PCI: cache line size of 32 is not supported by device 0000:00:1d.7 ehci_hcd 0000:00:1d.7: irq 177, io mem 0xfeb3fc00 ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 usb usb5: configuration #1 chosen from 1 choice hub 5-0:1.0: USB hub found hub 5-0:1.0: 8 ports detected ICH6: IDE controller at PCI slot 0000:00:1f.1 ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 18 (level, low) -> IRQ 193 ICH6: chipset revision 4 ICH6: not 100% native mode: will probe irqs later ide0: BM-DMA at 0xffa0-0xffa7, BIOS settings: hda:DMA, hdb:DMA ide1: BM-DMA at 0xffa8-0xffaf, BIOS settings: hdc:pio, hdd:pio Probing IDE interface ide0... hda: FUJITSU MHT2040AT, ATA DISK drive hdb: TSSTcorpCDW/DVD TS-L462A, ATAPI CD/DVD-ROM drive ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 Probing IDE interface ide1... 8139cp 0000:01:00.0: This (id 10ec:8139 rev 10) is not an 8139C+ compatible chip 8139cp 0000:01:00.0: Try the "8139too" driver instead. 8139too Fast Ethernet driver 0.9.27 ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 20 (level, low) -> IRQ 209 eth0: RealTek RTL8139 at 0xd800, 00:13:d4:1b:fa:2a, IRQ 209 eth0: Identified 8139 chip type 'RTL-8100B/8139D' hda: max request size: 128KiB ACPI: PCI Interrupt 0000:01:01.1[B] -> GSI 18 (level, low) -> IRQ 193 ohci1394: fw-host0: OHCI-1394 1.0 (PCI): IRQ=[193] MMIO=[fe8fe000-fe8fe7ff] Max Packet=[2048] IR/IT contexts=[4/4] hda: 78140160 sectors (40007 MB) w/2048KiB Cache, CHS=65535/16/63, UDMA(100) hda: cache flushes supported hda: hda1 hda2 hda3 hda4 hdb: ATAPI 24X DVD-ROM CD-R/RW drive, 2048kB Cache, UDMA(33) Uniform CD-ROM driver Revision: 3.20 kjournald starting. Commit interval 5 seconds EXT3-fs: mounted filesystem with ordered data mode. ieee1394: Host added: ID:BUS[0-00:1023] GUID[00e0180003322ed6] eth1394: eth0: IEEE-1394 IPv4 over 1394 Ethernet (fw-host0) Linux agpgart interface v0.101 (c) Dave Jones agpgart: Detected an Intel 915GM Chipset. agpgart: Detected 16124K stolen memory. agpgart: AGP aperture is 256M @ 0xd0000000 Yenta: CardBus bridge found at 0000:01:01.0 [1043:1117] intel_rng: FWH not detected Yenta: ISA IRQ mask 0x04b8, PCI irq 169 Socket status: 30000006 Yenta: Raising subordinate bus# of parent bus (#01) from #02 to #05 pcmcia: parent PCI bridge I/O window: 0xd000 - 0xdfff cs: IO port probe 0xd000-0xdfff: clean. pcmcia: parent PCI bridge Memory window: 0xfe800000 - 0xfe8fffff pcmcia: parent PCI bridge Memory window: 0x20000000 - 0x21ffffff input: PC Speaker as /class/input/input1 sdhci: Secure Digital Host Controller Interface driver, 0.12 sdhci: Copyright(c) Pierre Ossman sdhci: SDHCI controller found at 0000:01:01.2 [1180:0822] (rev 17) ACPI: PCI Interrupt 0000:01:01.2[C] -> GSI 19 (level, low) -> IRQ 185 mmc0: SDHCI at 0xfe8fe800 irq 185 DMA Real Time Clock Driver v1.12ac parport: PnPBIOS parport detected. parport0: PC-style at 0x378, irq 7 [PCSPP,EPP] ieee80211_crypt: registered algorithm 'NULL' ieee80211: 802.11 data/management/control stack, git-1.1.13 ieee80211: Copyright (C) 2004-2005 Intel Corporation irda_init() NET: Registered protocol family 23 ipw2200: Intel(R) PRO/Wireless 2200/2915 Network Driver, 1.1.2kmq ipw2200: Copyright(c) 2003-2006 Intel Corporation ACPI: PCI Interrupt 0000:01:03.0[A] -> GSI 22 (level, low) -> IRQ 217 ipw2200: Detected Intel PRO/Wireless 2915ABG Network Connection Synaptics Touchpad, model: 1, fw: 5.9, id: 0x926eb1, caps: 0xa0471b/0x0 ipw2200: Detected geography ZZE (13 802.11bg channels, 19 802.11a channels) input: SynPS/2 Synaptics TouchPad as /class/input/input2 ts: Compaq touchscreen protocol output ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 16 (level, low) -> IRQ 201 PCI: Setting latency timer of device 0000:00:1b.0 to 64 cs: IO port probe 0x100-0x3af: excluding 0x170-0x177 0x370-0x37f cs: IO port probe 0x3e0-0x4ff: excluding 0x400-0x41f 0x4d0-0x4d7 cs: IO port probe 0x820-0x8ff: clean. cs: IO port probe 0xc00-0xcf7: clean. cs: IO port probe 0xa00-0xaff: clean. EXT3 FS on hda4, internal journal loop: loaded (max 8 devices) SCSI subsystem initialized ieee1394: sbp2: Driver forced to serialize I/O (serialize_io=1) ieee1394: sbp2: Try serialize_io=0 for better performance Asus Laptop ACPI Extras version 0.30 unsupported model A3E, trying default values send /proc/acpi/dsdt to the developers device-mapper: ioctl: 4.7.0-ioctl (2006-06-24) initialised: dm-devel@redhat.com NTFS driver 2.1.27 [Flags: R/W MODULE]. NTFS volume version 3.1. pcmcia: Detected deprecated PCMCIA ioctl usage from process: discover. pcmcia: This interface will soon be removed from the kernel; please expect breakage unless you upgrade to new tools. pcmcia: see http://www.kernel.org/pub/linux/utils/kernel/pcmcia/pcmcia.html for details.