Linux version 2.6.9-34.ELsmp (buildcentos@build-i386) (gcc version 3.4.5 20051201 (Red Hat 3.4.5-2)) #1 SMP Wed Mar 8 00:27:0 3 CST 2006 BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009f800 (usable) BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved) BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 000000003f7f0000 (usable) BIOS-e820: 000000003f7f0000 - 000000003f7f3000 (ACPI NVS) BIOS-e820: 000000003f7f3000 - 000000003f800000 (ACPI data) BIOS-e820: 00000000f0000000 - 00000000f4000000 (reserved) BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved) 119MB HIGHMEM available. 896MB LOWMEM available. found SMP MP-table at 000f4e90 NX (Execute Disable) protection: active On node 0 totalpages: 260080 DMA zone: 4096 pages, LIFO batch:1 Normal zone: 225280 pages, LIFO batch:16 HighMem zone: 30704 pages, LIFO batch:7 DMI 2.3 present. Using APIC driver default ACPI: RSDP (v000 GBT ) @ 0x000f67f0 ACPI: RSDT (v001 GBT AWRDACPI 0x42302e31 AWRD 0x01010101) @ 0x3f7f3040 ACPI: FADT (v001 GBT AWRDACPI 0x42302e31 AWRD 0x01010101) @ 0x3f7f30c0 ACPI: MCFG (v001 GBT AWRDACPI 0x42302e31 AWRD 0x01010101) @ 0x3f7f6c40 ACPI: MADT (v001 GBT AWRDACPI 0x42302e31 AWRD 0x01010101) @ 0x3f7f6b80 ACPI: SSDT (v001 PmRef Cpu0Ist 0x00003000 INTL 0x20040311) @ 0x3f7f6cc0 ACPI: SSDT (v001 PmRef CpuPm 0x00003000 INTL 0x20040311) @ 0x3f7f7150 ACPI: DSDT (v001 GBT AWRDACPI 0x00001000 MSFT 0x0100000c) @ 0x00000000 ACPI: PM-Timer IO Port: 0x408 ACPI: Local APIC address 0xfee00000 ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) Processor #0 15:4 APIC version 20 ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled) Processor #1 15:4 APIC version 20 ACPI: LAPIC_NMI (acpi_id[0x00] dfl dfl lint[0x1]) ACPI: LAPIC_NMI (acpi_id[0x01] dfl dfl lint[0x1]) Enabling APIC mode: Flat. Using 0 I/O APICs ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23 ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) ACPI: IRQ0 used by override. ACPI: IRQ2 used by override. ACPI: IRQ9 used by override. Using ACPI (MADT) for SMP configuration information Built 1 zonelists Kernel command line: ro root=/dev/md1 rhgb quiet Initializing CPU#0 CPU 0 irqstacks, hard=c03ea000 soft=c03ca000 PID hash table entries: 4096 (order: 12, 65536 bytes) Detected 2993.619 MHz processor. Using tsc for high-res timesource Console: colour VGA+ 80x25 Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) Memory: 1025432k/1040320k available (1868k kernel code, 14108k reserved, 755k data, 180k init, 122816k highmem) Calibrating delay using timer specific routine.. 5992.06 BogoMIPS (lpj=2996030) Security Scaffold v1.0.0 initialized SELinux: Initializing. SELinux: Starting in permissive mode There is already a security framework initialized, register_security failed. selinux_register_security: Registering secondary module capability Capability LSM initialized as secondary Mount-cache hash table entries: 512 (order: 0, 4096 bytes) CPU: After generic identify, caps: bfebfbff 20100000 00000000 00000000 CPU: After vendor identify, caps: bfebfbff 20100000 00000000 00000000 monitor/mwait feature present. using mwait in idle threads. CPU: Trace cache: 12K uops, L1 D cache: 16K CPU: L2 cache: 2048K CPU0: Initial APIC ID: 0, Physical Processor ID: 0 CPU: After all inits, caps: bfebfbff 20100000 00000000 00000080 Intel machine check architecture supported. Intel machine check reporting enabled on CPU#0. CPU0: Intel P4/Xeon Extended MCE MSRs (24) available CPU0: Thermal monitoring enabled Enabling fast FPU save and restore... done. Enabling unmasked SIMD FPU exception support... done. Checking 'hlt' instruction... OK. CPU0: Intel(R) Pentium(R) 4 CPU 3.00GHz stepping 03 per-CPU timeslice cutoff: 1751.71 usecs. task migration cache decay timeout: 2 msecs. Booting processor 1/1 eip 3000 CPU 1 irqstacks, hard=c03eb000 soft=c03cb000 Initializing CPU#1 Calibrating delay using timer specific routine.. 5984.61 BogoMIPS (lpj=2992307) CPU: After generic identify, caps: bfebfbff 20100000 00000000 00000000 CPU: After vendor identify, caps: bfebfbff 20100000 00000000 00000000 monitor/mwait feature present. CPU: Trace cache: 12K uops, L1 D cache: 16K CPU: L2 cache: 2048K CPU1: Initial APIC ID: 1, Physical Processor ID: 0 CPU: After all inits, caps: bfebfbff 20100000 00000000 00000080 Intel machine check architecture supported. Intel machine check reporting enabled on CPU#1. CPU1: Intel P4/Xeon Extended MCE MSRs (24) available CPU1: Thermal monitoring enabled CPU1: Intel(R) Pentium(R) 4 CPU 3.00GHz stepping 03 Total of 2 processors activated (11976.67 BogoMIPS). ENABLING IO-APIC IRQs ..TIMER: vector=0x31 pin1=2 pin2=-1 checking TSC synchronization across 2 CPUs: passed. Brought up 2 CPUs zapping low mappings. checking if image is initramfs... it is Freeing initrd memory: 481k freed NET: Registered protocol family 16 PCI: PCI BIOS revision 3.00 entry at 0xfac80, last bus=3 PCI: Using MMCONFIG mtrr: v2.0 (20020519) ACPI: Subsystem revision 20040816 ACPI: Interpreter enabled ACPI: Using IOAPIC for interrupt routing ACPI: PCI Root Bridge [PCI0] (00:00) PCI: Probing PCI hardware (bus 00) PCI: Ignoring BAR0-3 of IDE controller 0000:00:1f.1 PCI: Transparent bridge - 0000:00:1e.0 ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX0._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX1._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB0._PRT] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 *9 10 11 12 14 15) ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 *10 11 12 14 15) ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 *10 11 12 14 15) ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 *11 12 14 15) ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 *5 6 7 9 10 11 12 14 15) ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 5 6 7 9 10 *11 12 14 15) Linux Plug and Play Support v0.97 (c) Adam Belay usbcore: registered new driver usbfs usbcore: registered new driver hub PCI: Using ACPI for IRQ routing ACPI: PCI interrupt 0000:00:02.0[A] -> GSI 16 (level, low) -> IRQ 169 ACPI: PCI interrupt 0000:00:1b.0[A] -> GSI 16 (level, low) -> IRQ 169 ACPI: PCI interrupt 0000:00:1c.0[A] -> GSI 16 (level, low) -> IRQ 169 ACPI: PCI interrupt 0000:00:1c.1[B] -> GSI 17 (level, low) -> IRQ 177 ACPI: PCI interrupt 0000:00:1d.0[A] -> GSI 23 (level, low) -> IRQ 185 ACPI: PCI interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) -> IRQ 193 ACPI: PCI interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 201 ACPI: PCI interrupt 0000:00:1d.3[D] -> GSI 16 (level, low) -> IRQ 169 ACPI: PCI interrupt 0000:00:1d.7[A] -> GSI 23 (level, low) -> IRQ 185 ACPI: PCI interrupt 0000:00:1f.1[A] -> GSI 18 (level, low) -> IRQ 201 ACPI: PCI interrupt 0000:00:1f.2[B] -> GSI 19 (level, low) -> IRQ 193 ACPI: PCI interrupt 0000:00:1f.3[B] -> GSI 19 (level, low) -> IRQ 193 ACPI: PCI interrupt 0000:02:00.0[A] -> GSI 17 (level, low) -> IRQ 177 ACPI: PCI interrupt 0000:03:00.0[A] -> GSI 20 (level, low) -> IRQ 209 ACPI: PCI interrupt 0000:03:01.0[A] -> GSI 19 (level, low) -> IRQ 193 ACPI: PCI interrupt 0000:03:07.0[A] -> GSI 23 (level, low) -> IRQ 185 apm: BIOS version 1.2 Flags 0x07 (Driver version 1.16ac) apm: disabled - APM is not SMP safe. audit: initializing netlink socket (disabled) audit(1143843552.834:1): initialized highmem bounce pool size: 64 pages Total HugeTLB memory allocated, 0 VFS: Disk quotas dquot_6.5.1 Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) SELinux: Registering netfilter hooks Initializing Cryptographic API ksign: Installing public key data Loading keyring - Added public key B4802E7A21D4FA03 - User ID: CentOS (Kernel Module GPG key) pci_hotplug: PCI Hot Plug PCI Core version: 0.5 ACPI: Processor [CPU0] (supports C1, 2 throttling states) ACPI: Processor [CPU1] (supports C1, 2 throttling states) Real Time Clock Driver v1.12 Linux agpgart interface v0.100 (c) Dave Jones agpgart: Detected an Intel 945G Chipset. agpgart: Maximum main memory to use for agp memory: 933M agpgart: Detected 7932K stolen memory. agpgart: AGP aperture is 256M @ 0xd0000000 serio: i8042 AUX port at 0x60,0x64 irq 12 serio: i8042 KBD port at 0x60,0x64 irq 1 Serial: 8250/16550 driver $Revision: 1.90 $ 8 ports, IRQ sharing enabled ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A RAMDISK driver initialized: 16 RAM disks of 16384K size 1024 blocksize divert: not allocating divert_blk for non-ethernet device lo Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx ICH7: IDE controller at PCI slot 0000:00:1f.1 ACPI: PCI interrupt 0000:00:1f.1[A] -> GSI 18 (level, low) -> IRQ 201 ICH7: chipset revision 1 ICH7: not 100% native mode: will probe irqs later ide0: BM-DMA at 0xf000-0xf007, BIOS settings: hda:DMA, hdb:pio ide1: BM-DMA at 0xf008-0xf00f, BIOS settings: hdc:pio, hdd:pio Probing IDE interface ide0... hda: SONY DVD-ROM DDU1615, ATAPI CD/DVD-ROM drive Using cfq io scheduler ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 Probing IDE interface ide1... Probing IDE interface ide1... Probing IDE interface ide2... Probing IDE interface ide3... Probing IDE interface ide4... Probing IDE interface ide5... hda: ATAPI 40X DVD-ROM drive, 254kB Cache, UDMA(33) Uniform CD-ROM driver Revision: 3.20 ide-floppy driver 0.99.newide usbcore: registered new driver hiddev usbcore: registered new driver usbhid drivers/usb/input/hid-core.c: v2.0:USB HID core driver mice: PS/2 mouse device common for all mice input: AT Translated Set 2 keyboard on isa0060/serio0 input: PS/2 Generic Mouse on isa0060/serio1 md: md driver 0.90.0 MAX_MD_DEVS=256, MD_SB_DISKS=27 NET: Registered protocol family 2 IP: routing cache hash table of 4096 buckets, 64Kbytes TCP: Hash tables configured (established 131072 bind 43690) Initializing IPsec netlink socket NET: Registered protocol family 1 NET: Registered protocol family 17 cpufreq: CPU0 - ACPI performance management activated. cpufreq: *P0: 3000 MHz, 22464 mW, 160 uS cpufreq: P1: 2800 MHz, 22464 mW, 160 uS cpufreq: CPU1 - ACPI performance management activated. cpufreq: *P0: 3000 MHz, 22464 mW, 160 uS cpufreq: P1: 2800 MHz, 22464 mW, 160 uS ACPI: (supports S0 S3 S4 S5) ACPI wakeup devices: PCI0 PEX0 PEX1 PEX2 PEX3 PEX4 PEX5 HUB0 USB0 USB1 USB2 USB3 USBE AC97 MC97 AZAL Freeing unused kernel memory: 180k freed SCSI subsystem initialized libata version 1.20 loaded. ata_piix 0000:00:1f.2: version 1.05 ACPI: PCI interrupt 0000:00:1f.2[B] -> GSI 19 (level, low) -> IRQ 193 PCI: Setting latency timer of device 0000:00:1f.2 to 64 ata1: SATA max UDMA/133 cmd 0xD400 ctl 0xD802 bmdma 0xE400 irq 193 ata2: SATA max UDMA/133 cmd 0xDC00 ctl 0xE002 bmdma 0xE408 irq 193 ata1: dev 0 cfg 49:2f00 82:746b 83:7f01 84:4023 85:7468 86:3c01 87:4023 88:207f ata1: dev 0 ATA-7, max UDMA/133, 156299375 sectors: LBA48 ata1: dev 0 configured for UDMA/133 scsi0 : ata_piix ata2: dev 0 cfg 49:2f00 82:746b 83:7f01 84:4023 85:7468 86:3c01 87:4023 88:207f ata2: dev 0 ATA-7, max UDMA/133, 156299375 sectors: LBA48 ata2: dev 0 configured for UDMA/133 scsi1 : ata_piix Vendor: ATA Model: WDC WD800JD-00LS Rev: 06.0 Type: Direct-Access ANSI SCSI revision: 05 SCSI device sda: 156299375 512-byte hdwr sectors (80025 MB) SCSI device sda: drive cache: write back SCSI device sda: 156299375 512-byte hdwr sectors (80025 MB) SCSI device sda: drive cache: write back sda: sda1 sda2 sda3 sda4 < sda5 sda6 > Attached scsi disk sda at scsi0, channel 0, id 0, lun 0 Vendor: ATA Model: WDC WD800JD-00LS Rev: 06.0 Type: Direct-Access ANSI SCSI revision: 05 SCSI device sdb: 156299375 512-byte hdwr sectors (80025 MB) SCSI device sdb: drive cache: write back SCSI device sdb: 156299375 512-byte hdwr sectors (80025 MB) SCSI device sdb: drive cache: write back sdb: sdb1 sdb2 sdb3 sdb4 < sdb5 sdb6 > Attached scsi disk sdb at scsi1, channel 0, id 0, lun 0 md: raid1 personality registered as nr 3 md: Autodetecting RAID arrays. md: autorun ... md: considering sdb6 ... md: adding sdb6 ... md: sdb3 has different UUID to sdb6 md: sdb2 has different UUID to sdb6 md: sdb1 has different UUID to sdb6 md: adding sda6 ... md: sda3 has different UUID to sdb6 md: sda2 has different UUID to sdb6 md: sda1 has different UUID to sdb6 md: created md3 md: bind md: bind md: running: raid1: raid set md3 active with 2 out of 2 mirrors md: considering sdb3 ... md: adding sdb3 ... md: sdb2 has different UUID to sdb3 md: sdb1 has different UUID to sdb3 md: adding sda3 ... md: sda2 has different UUID to sdb3 md: sda1 has different UUID to sdb3 md: created md1 md: bind md: bind md: running: raid1: raid set md1 active with 2 out of 2 mirrors md: considering sdb2 ... md: adding sdb2 ... md: sdb1 has different UUID to sdb2 md: adding sda2 ... md: sda1 has different UUID to sdb2 md: created md2 md: bind md: bind md: running: raid1: raid set md2 active with 2 out of 2 mirrors md: considering sdb1 ... md: adding sdb1 ... md: adding sda1 ... md: created md0 md: bind md: bind md: running: raid1: raid set md0 active with 2 out of 2 mirrors md: ... autorun DONE. md: Autodetecting RAID arrays. md: autorun ... md: ... autorun DONE. md: Autodetecting RAID arrays. md: autorun ... md: ... autorun DONE. md: Autodetecting RAID arrays. md: autorun ... md: ... autorun DONE. kjournald starting. Commit interval 5 seconds EXT3-fs: mounted filesystem with ordered data mode. SELinux: Disabled at runtime. SELinux: Unregistering netfilter hooks inserting floppy driver for 2.6.9-34.ELsmp Floppy drive(s): fd0 is 1.44M FDC 0 is a post-1991 82077 e100: Intel(R) PRO/100 Network Driver, 3.4.8-k2-NAPI e100: Copyright(c) 1999-2005 Intel Corporation ACPI: PCI interrupt 0000:03:00.0[A] -> GSI 20 (level, low) -> IRQ 209 3c59x: Donald Becker and others. www.scyld.com/network/vortex.html 0000:03:00.0: 3Com PCI 3c905B Cyclone 100baseTx at 0xa000. Vers LK1.1.19 divert: allocating divert_blk for eth0 8139too Fast Ethernet driver 0.9.27 ACPI: PCI interrupt 0000:03:01.0[A] -> GSI 19 (level, low) -> IRQ 193 divert: allocating divert_blk for eth1 eth1: RealTek RTL8139 at 0xa400, 00:0e:2e:2c:c8:55, IRQ 193 eth1: Identified 8139 chip type 'RTL-8100B/8139D' ACPI: PCI interrupt 0000:02:00.0[A] -> GSI 17 (level, low) -> IRQ 177 PCI: Setting latency timer of device 0000:02:00.0 to 64 sky2 v0.13 addr 0xe1000000 irq 177 Yukon-EC (0xb6) rev 1 divert: allocating divert_blk for eth2 sky2 eth2: addr 00:14:85:c7:24:fb ACPI: PCI interrupt 0000:00:1b.0[A] -> GSI 16 (level, low) -> IRQ 169 PCI: Setting latency timer of device 0000:00:1b.0 to 64 hw_random: RNG not detected Evaluate _OSC Set fails. Status = 0x0005 pciehp: Both _OSC and OSHP methods do not exist Evaluate _OSC Set fails. Status = 0x0005 pciehp: Both _OSC and OSHP methods do not exist ACPI: PCI interrupt 0000:00:1d.7[A] -> GSI 23 (level, low) -> IRQ 185 ehci_hcd 0000:00:1d.7: EHCI Host Controller PCI: Setting latency timer of device 0000:00:1d.7 to 64 ehci_hcd 0000:00:1d.7: irq 185, pci mem f88c2000 ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1 PCI: cache line size of 128 is not supported by device 0000:00:1d.7 ehci_hcd 0000:00:1d.7: USB 2.0 enabled, EHCI 1.00, driver 2004-May-10 hub 1-0:1.0: USB hub found hub 1-0:1.0: 8 ports detected USB Universal Host Controller Interface driver v2.2 ACPI: PCI interrupt 0000:00:1d.0[A] -> GSI 23 (level, low) -> IRQ 185 uhci_hcd 0000:00:1d.0: UHCI Host Controller PCI: Setting latency timer of device 0000:00:1d.0 to 64 uhci_hcd 0000:00:1d.0: irq 185, io base 0000b000 uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2 hub 2-0:1.0: USB hub found hub 2-0:1.0: 2 ports detected ACPI: PCI interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) -> IRQ 193 uhci_hcd 0000:00:1d.1: UHCI Host Controller PCI: Setting latency timer of device 0000:00:1d.1 to 64 uhci_hcd 0000:00:1d.1: irq 193, io base 0000b400 uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3 hub 3-0:1.0: USB hub found hub 3-0:1.0: 2 ports detected ACPI: PCI interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 201 uhci_hcd 0000:00:1d.2: UHCI Host Controller PCI: Setting latency timer of device 0000:00:1d.2 to 64 uhci_hcd 0000:00:1d.2: irq 201, io base 0000b800 uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4 hub 4-0:1.0: USB hub found hub 4-0:1.0: 2 ports detected ACPI: PCI interrupt 0000:00:1d.3[D] -> GSI 16 (level, low) -> IRQ 169 uhci_hcd 0000:00:1d.3: UHCI Host Controller PCI: Setting latency timer of device 0000:00:1d.3 to 64 uhci_hcd 0000:00:1d.3: irq 169, io base 0000bc00 uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5 hub 5-0:1.0: USB hub found hub 5-0:1.0: 2 ports detected md: Autodetecting RAID arrays. md: autorun ... md: ... autorun DONE. ACPI: Power Button (FF) [PWRF] EXT3 FS on md1, internal journal device-mapper: 4.5.0-ioctl (2005-10-04) initialised: dm-devel@redhat.com cdrom: open failed. cdrom: open failed. cdrom: open failed. kjournald starting. Commit interval 5 seconds EXT3 FS on md0, internal journal EXT3-fs: mounted filesystem with ordered data mode. kjournald starting. Commit interval 5 seconds EXT3 FS on md2, internal journal EXT3-fs: mounted filesystem with ordered data mode. kjournald starting. Commit interval 5 seconds EXT3 FS on md3, internal journal EXT3-fs: mounted filesystem with ordered data mode. Adding 522072k swap on /dev/sdb5. Priority:-1 extents:1 Adding 522072k swap on /dev/sda5. Priority:-2 extents:1 IA-32 Microcode Update Driver: v1.14 microcode: CPU0 already at revision 0x5 (current=0x5) microcode: CPU1 already at revision 0x5 (current=0x5) microcode: No new microdata for cpu 1 microcode: No new microdata for cpu 0 IA-32 Microcode Update Driver v1.14 unregistered parport0: PC-style at 0x378 [PCSPP,TRISTATE] ip_tables: (C) 2000-2002 Netfilter core team ip_tables: (C) 2000-2002 Netfilter core team ACPI: PCI interrupt 0000:03:00.0[A] -> GSI 20 (level, low) -> IRQ 209 Universal TUN/TAP device driver 1.5 (C)1999-2002 Maxim Krasnyansky i2c /dev entries driver parport0: PC-style at 0x378 [PCSPP,TRISTATE] lp0: using parport0 (polling). lp0: console ready NET: Registered protocol family 10 Disabled Privacy Extensions on device c0342040(lo) IPv6 over IPv4 tunneling driver divert: not allocating divert_blk for non-ethernet device sit0 eth1: no IPv6 routers present ip_tables: (C) 2000-2002 Netfilter core team ip_tables: (C) 2000-2002 Netfilter core team dev12648: link up, 100Mbps, full-duplex, lpa 0x45E1 ip_tables: (C) 2000-2002 Netfilter core team ACPI: PCI interrupt 0000:03:00.0[A] -> GSI 20 (level, low) -> IRQ 209 dev12648: no IPv6 routers present eth1: no IPv6 routers present eth1: Setting promiscuous mode. device eth1 entered promiscuous mode device eth1 left promiscuous mode eth1: Setting promiscuous mode. device eth1 entered promiscuous mode device eth1 left promiscuous mode eth1: Setting promiscuous mode. device eth1 entered promiscuous mode device eth1 left promiscuous mode eth1: Setting promiscuous mode. device eth1 entered promiscuous mode device eth1 left promiscuous mode eth1: Setting promiscuous mode. device eth1 entered promiscuous mode divert: not allocating divert_blk for non-ethernet device tun0 ip_tables: (C) 2000-2002 Netfilter core team ip_conntrack version 2.1 (8127 buckets, 65016 max) - 340 bytes per conntrack