May 10 13:47:39 robertj-laptop gnome-power-manager: (robertj) Suspending computer because the DBUS method Suspend() was invoked May 10 13:47:41 robertj-laptop kernel: [ 4040.231980] ADDRCONF(NETDEV_UP): eth1: link is not ready May 10 13:47:41 robertj-laptop kernel: [ 4040.487514] ACPI: PCI interrupt for device 0000:04:00.0 disabled May 10 13:47:45 robertj-laptop kernel: [ 4042.748509] Disabling non-boot CPUs ... May 10 13:47:45 robertj-laptop kernel: [ 4042.863337] CPU 1 is now offline May 10 13:47:45 robertj-laptop kernel: [ 4042.863342] SMP alternatives: switching to UP code May 10 18:19:30 robertj-laptop -- MARK -- May 10 18:19:30 robertj-laptop kernel: [ 4042.870139] CPU1 is down May 10 18:19:30 robertj-laptop kernel: [ 4042.870142] Stopping tasks ... done. May 10 18:19:30 robertj-laptop kernel: [ 4043.086935] Suspending console(s) May 10 18:19:30 robertj-laptop kernel: [ 4046.004631] ACPI: PCI interrupt for device 0000:06:04.2 disabled May 10 18:19:30 robertj-laptop kernel: [ 4046.017803] ohci1394 does not fully support suspend and resume yet May 10 18:19:30 robertj-laptop kernel: [ 4046.037763] eth1: Going into suspend... May 10 18:19:30 robertj-laptop kernel: [ 4046.148953] ACPI: PCI interrupt for device 0000:02:00.0 disabled May 10 18:19:30 robertj-laptop kernel: [ 4046.161578] NVRM: RmPowerManagement: 3 May 10 18:19:30 robertj-laptop kernel: [ 4047.192118] ACPI: PCI interrupt for device 0000:00:1f.2 disabled May 10 18:19:30 robertj-laptop kernel: [ 4047.205133] ACPI: PCI interrupt for device 0000:00:1d.7 disabled May 10 18:19:30 robertj-laptop kernel: [ 4047.221004] ACPI: PCI interrupt for device 0000:00:1d.3 disabled May 10 18:19:30 robertj-laptop kernel: [ 4047.221041] ACPI: PCI interrupt for device 0000:00:1d.2 disabled May 10 18:19:30 robertj-laptop kernel: [ 4047.221078] ACPI: PCI interrupt for device 0000:00:1d.1 disabled May 10 18:19:30 robertj-laptop kernel: [ 4047.221114] ACPI: PCI interrupt for device 0000:00:1d.0 disabled May 10 18:19:30 robertj-laptop kernel: [ 4047.228952] ACPI: PCI interrupt for device 0000:00:1b.0 disabled May 10 18:19:30 robertj-laptop kernel: [ 0.717799] ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 22 (level, low) -> IRQ 22 May 10 18:19:30 robertj-laptop kernel: [ 0.921854] ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 23 (level, low) -> IRQ 23 May 10 18:19:30 robertj-laptop kernel: [ 0.921923] usb usb2: root hub lost power or was reset May 10 18:19:30 robertj-laptop kernel: [ 0.921946] ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) -> IRQ 19 May 10 18:19:30 robertj-laptop kernel: [ 0.922013] usb usb3: root hub lost power or was reset May 10 18:19:30 robertj-laptop kernel: [ 0.922036] ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 18 May 10 18:19:30 robertj-laptop kernel: [ 0.922103] usb usb4: root hub lost power or was reset May 10 18:19:30 robertj-laptop kernel: [ 0.922139] ACPI: PCI Interrupt 0000:00:1d.3[D] -> GSI 16 (level, low) -> IRQ 16 May 10 18:19:30 robertj-laptop kernel: [ 0.922205] usb usb5: root hub lost power or was reset May 10 18:19:30 robertj-laptop kernel: [ 0.937603] ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 23 (level, low) -> IRQ 23 May 10 18:19:30 robertj-laptop kernel: [ 0.953643] ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 19 (level, low) -> IRQ 19 May 10 18:19:30 robertj-laptop kernel: [ 0.955653] NVRM: RmPowerManagement: 4 May 10 18:19:30 robertj-laptop kernel: [ 2.982707] eth1: Coming out of suspend... May 10 18:19:30 robertj-laptop kernel: [ 2.996490] PCI: Enabling device 0000:02:00.0 (0000 -> 0002) May 10 18:19:30 robertj-laptop kernel: [ 2.996502] ACPI: PCI Interrupt 0000:02:00.0[A] -> GSI 16 (level, low) -> IRQ 16 May 10 18:19:30 robertj-laptop kernel: [ 3.065664] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[20] MMIO=[fabff800-fabfffff] Max Packet=[2048] IR/IT contexts=[4/8] May 10 18:19:30 robertj-laptop kernel: [ 3.084500] ACPI: PCI Interrupt 0000:06:04.2[B] -> GSI 17 (level, low) -> IRQ 17 May 10 18:19:30 robertj-laptop kernel: [ 3.091741] pnp: Device 00:09 does not support activation. May 10 18:19:30 robertj-laptop kernel: [ 3.091746] pnp: Device 00:0a does not support activation. May 10 18:19:30 robertj-laptop kernel: [ 4.083092] ata1: soft resetting port May 10 18:19:30 robertj-laptop kernel: [ 4.083206] ata2: soft resetting port May 10 18:19:30 robertj-laptop kernel: [ 4.240445] Restarting tasks ... <6>usb 4-1: USB disconnect, address 2 May 10 18:19:30 robertj-laptop kernel: [ 4.244932] ata1.00: ata_hpa_resize 1: sectors = 195371568, hpa_sectors = 195371568 May 10 18:19:30 robertj-laptop kernel: [ 4.253219] ata1.00: ata_hpa_resize 1: sectors = 195371568, hpa_sectors = 195371568 May 10 18:19:30 robertj-laptop kernel: [ 4.253227] ata1.00: configured for UDMA/133 May 10 18:19:30 robertj-laptop kernel: [ 4.253232] ata1: EH complete May 10 18:19:30 robertj-laptop kernel: [ 4.255786] SCSI device sda: 195371568 512-byte hdwr sectors (100030 MB) May 10 18:19:30 robertj-laptop kernel: [ 4.257244] sda: Write Protect is off May 10 18:19:30 robertj-laptop kernel: [ 4.259815] SCSI device sda: write cache: enabled, read cache: enabled, doesn't support DPO or FUA May 10 18:19:30 robertj-laptop kernel: [ 4.305722] done. May 10 18:19:30 robertj-laptop kernel: [ 4.305744] Enabling non-boot CPUs ... May 10 18:19:30 robertj-laptop kernel: [ 4.325877] SMP alternatives: switching to SMP code May 10 18:19:30 robertj-laptop kernel: [ 4.326019] Booting processor 1/2 APIC 0x1 May 10 18:19:30 robertj-laptop kernel: [ 4.336682] Initializing CPU#1 May 10 18:19:30 robertj-laptop kernel: [ 4.415674] Calibrating delay using timer specific routine.. 3990.11 BogoMIPS (lpj=7980226) May 10 18:19:30 robertj-laptop kernel: [ 4.415681] CPU: L1 I cache: 32K, L1 D cache: 32K May 10 18:19:30 robertj-laptop kernel: [ 4.415683] CPU: L2 cache: 4096K May 10 18:19:30 robertj-laptop kernel: [ 4.415685] CPU 1/1 -> Node 0 May 10 18:19:30 robertj-laptop kernel: [ 4.415687] CPU: Physical Processor ID: 0 May 10 18:19:30 robertj-laptop kernel: [ 4.415688] CPU: Processor Core ID: 1 May 10 18:19:30 robertj-laptop kernel: [ 4.416194] Intel(R) Core(TM)2 CPU T7200 @ 2.00GHz stepping 06 May 10 18:19:30 robertj-laptop kernel: [ 4.419671] CPU 1: Syncing TSC to CPU 0. May 10 18:19:30 robertj-laptop kernel: [ 4.419848] CPU 1: synchronized TSC with CPU 0 (last diff 0 cycles, maxerr 948 cycles) May 10 18:19:30 robertj-laptop kernel: [ 4.421775] CPU1 is up May 10 18:19:30 robertj-laptop kernel: [ 4.451717] usb 4-2: USB disconnect, address 3 May 10 18:19:30 robertj-laptop gnome-power-manager: (robertj) DBUS timed out, but recovering May 10 18:19:30 robertj-laptop gnome-power-manager: (robertj) Resuming computer May 10 18:19:30 robertj-laptop kernel: [ 4.615585] usb 1-4: USB disconnect, address 2 May 10 18:19:30 robertj-laptop kernel: [ 4.640397] ata2.00: configured for UDMA/33 May 10 18:19:30 robertj-laptop kernel: [ 4.640406] ata2: EH complete May 10 18:19:31 robertj-laptop kernel: [ 4.855440] usb 1-4: new high speed USB device using ehci_hcd and address 5 May 10 18:19:31 robertj-laptop kernel: [ 4.869318] vbetool[9958]: segfault at 000000000010ffef rip 00002aad81ee022f rsp 00007fff28fa7220 error 6 May 10 18:19:31 robertj-laptop kernel: [ 4.990117] usb 1-4: configuration #1 chosen from 1 choice May 10 18:19:31 robertj-laptop kernel: [ 5.590372] usb 4-1: new low speed USB device using uhci_hcd and address 4 May 10 18:19:31 robertj-laptop kernel: [ 5.596979] vbetool[10014]: segfault at 000000000010ffef rip 00002b6854ff622f rsp 00007fff55f121b0 error 6 May 10 18:19:32 robertj-laptop kernel: [ 5.703452] r8169 Gigabit Ethernet driver 2.2LK loaded May 10 18:19:32 robertj-laptop kernel: [ 5.703486] ACPI: PCI Interrupt 0000:04:00.0[A] -> GSI 18 (level, low) -> IRQ 18 May 10 18:19:32 robertj-laptop kernel: [ 5.703907] eth0: RTL8168b/8111b at 0xffffc2000007e000, 00:16:d4:51:53:54, IRQ 18 May 10 18:19:32 robertj-laptop kernel: [ 5.733659] r8169: eth0: link down May 10 18:19:32 robertj-laptop kernel: [ 5.733692] ADDRCONF(NETDEV_UP): eth0: link is not ready May 10 18:19:32 robertj-laptop kernel: [ 5.754529] usb 4-1: configuration #1 chosen from 1 choice May 10 18:19:32 robertj-laptop kernel: [ 5.770497] input: Microsoft Basic Optical Mouse as /class/input/input7 May 10 18:19:32 robertj-laptop kernel: [ 5.770544] input: USB HID v1.10 Mouse [Microsoft Basic Optical Mouse] on usb-0000:00:1d.2-1 May 10 18:19:32 robertj-laptop dhcdbd: message_handler: message handler not found under /com/redhat/dhcp/eth0 for sub-path eth0.dbus.get.reason May 10 18:19:32 robertj-laptop kernel: [ 6.047261] usb 4-2: new full speed USB device using uhci_hcd and address 5 May 10 18:19:32 robertj-laptop kernel: [ 6.214226] usb 4-2: configuration #1 chosen from 1 choice May 10 18:19:29 robertj-laptop kernel: [ 6.747931] vbetool[10126]: segfault at 000000000010ffef rip 00002b8e94bbb22f rsp 00007fff1634a600 error 6 May 10 18:19:29 robertj-laptop kernel: [ 6.838467] ADDRCONF(NETDEV_UP): eth1: link is not ready May 10 18:19:30 robertj-laptop kernel: [ 8.333008] input: Power Button (FF) as /class/input/input8 May 10 18:19:30 robertj-laptop kernel: [ 8.333347] ACPI: Power Button (FF) [PWRF] May 10 18:19:30 robertj-laptop kernel: [ 8.334194] input: Lid Switch as /class/input/input9 May 10 18:19:30 robertj-laptop kernel: [ 8.334441] ACPI: Lid Switch [LID0] May 10 18:19:30 robertj-laptop kernel: [ 8.337005] input: Power Button (CM) as /class/input/input10 May 10 18:19:30 robertj-laptop kernel: [ 8.337283] ACPI: Power Button (CM) [PWRB] May 10 18:19:31 robertj-laptop kernel: [ 8.538305] ACPI: AC Adapter [ACAD] (on-line) May 10 18:19:31 robertj-laptop kernel: [ 8.627408] ACPI: Battery Slot [BAT1] (battery present)