printenv
bootcmd=setenv bootargs root=/dev/nfs rw nfsroot=$serverip:$rootpath ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname:$netdev:off consolrramboot=setenv bootargs root=/dev/ram rw console=$consoledev,$baudrate $othbootargs;tftp $ramdiskaddr $ramdiskfile;tftp $loadaddr $bootfilrnfsboot=setenv bootargs root=/dev/nfs rw nfsroot=$serverip:$rootpath ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname:$netdev:off consolrbaudrate=115200
ethaddr=08:00:3e:03:01:11
eth1addr=08:00:3e:03:01:12
gatewayip=192.168.1.1
ramdiskfile=ramfs.83xx
ethact=Freescale TSEC0
consoledev=ttyS0
bootdelay=-1
loads_echo=1
loadkernaddr=1000000
loadramdaddr=1200000
kernaddr=fe060000
ramdiskaddr=fe260000
ramdisksize=65000
netdev=eth0
netmask=255.255.255.0
setargs=setenv bootfile vmlinux.gz.uboot;setenv ramdiskfile rootfs.ext2.gz.uboot;setenv hostname PowerQUICC
setramargs=setenv bootargs root=/dev/ram ramdisk_size=$ramdisksize rw ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname:$netdev:off consossetnfsargs=setenv bootargs root=/dev/nfs rw nfsroot=$serverip:$rootpath ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname:$netdev:off constftpramboot=run setargs;run setramargs;tftp $loadkernaddr $bootfile;tftp $loadramdaddr $ramdiskfile;bootm $loadkernaddr $loadramdaddr
tftpnfsboot=run setargs;run setnfsargs;tftp $loadkernaddr $bootfile;bootm $loadkernaddr
flashramboot=run setargs;run setramargs;bootm $kernaddr $ramdiskaddr
flashnfsboot=run setargs;run setnfsargs;bootm $kernaddr
setenv1=setenv rootpath /opt/ljd015-root1;setenv ipaddr 10.32.13.101;setenv ethaddr 08:00:3e:03:01:10;setenv eth1addr 08:00:3e:03:01:11;se2setenv2=setenv rootpath /opt/ljd015-root2;setenv ipaddr 10.32.13.102;setenv ethaddr 08:00:3e:03:02:10;setenv eth1addr 08:00:3e:03:02:11;se2setenv3=setenv rootpath /opt/ljd015-root3;setenv ipaddr 10.32.13.103;setenv ethaddr 08:00:3e:03:03:10;setenv eth1addr 08:00:3e:03:03:11;se2ipaddr=192.168.1.201
serverip=192.168.1.113
bootargs=console=ttyS0,115200n8
stdin=serial
stdout=serial
stderr=serial

Environment size: 2350/8188 bytes
=> setenv serverip 194.50.78.213
=> tftp $loadkernaddr uImage
Speed: 100, full duplex
Using Freescale TSEC0 device
TFTP from server 194.50.78.213; our IP address is 192.168.1.201; sending through gateway 192.168.1.1
Filename 'uImage'.
Load address: 0x1000000
Loading: *