options {
	
	pidfile = "bopm.pid";
	dns_fdlimit = 64;
};   
IRC {
	nick = "ProxyBot";
	realname = "Proxy Scanner";
	username = "ProxyBot";
	server = "69.223.78.114";
	port = 6667;
	nickserv = "privmsg nickserv :identify Spaz_put_pass_here";
	oper = "OPERNAME OPERPASS";
	mode = "+s +c-h";
	away = "I'm a bot, please don't message me. Messages will be ignored.";
	channel {
	   name = "#bopm";

	};
	connregex = "\\*\\*\\* Notice -- Client connecting: ([^ ]+) \\(([^@]+)@([^\\)]+)\\) \\[([0-9\\.]+)\\].*";
#	connregex = "\\*\\*\\* Connect/Exit -- from [^:]+: Client connecting on port [0-9]+: ([^ ]+) \\(([^@]+)@([^\\)]+)\\) \\[([0-9\\.]+)\\].*";
#	connregex = "\\*\\*\\* Notice -- Client connecting on port [0-9]+: ([^ ]+) \\(([^@]+)@([^\\)]+)\\) \\[([0-9\\.]+)\\].*";
	kline = "KLINE *@%h :Open Proxy found on your host. Please visit www.blitzed.org/proxy?ip=%i for more information.";
#       kline = "KLINE *@%h :Open Proxy found on your host. Please visit www.blitzed.org/opm/index2.phtml?ip=%i for more information.";
#       kline = "GLINE +*@%i 1800 :Open proxy found on your host. Please visit www.blitzed.org/proxy?ip=%i for more information.";
	perform = "PROTOCTL HCN";

};

OPM {
	blacklist {
	   /* The DNS name of the blacklist */
	   name = "opm.blitzed.org";
	   type = "A record bitmask";
	   ban_unknown = yes;
	   reply {
	      1 = "WinGate";
	      2 = "Socks";
	      4 = "HTTP";
	      8 = "Router";
	      16 = "HTTP POST";
	   };
#	   kline = "KLINE *@%h :Open proxy found on your host, please visit www.blitzed.org/proxy?ip=%i";
	};


	/* example: NJABL - please read http://www.njabl.org/use.html before
	 * uncommenting */
	 blacklist {
	    name = "dnsbl.njabl.org";
	    type = "A record reply";
	    reply {
	       9 = "Open proxy";
	    };
	    ban_unknown = no;
	    kline = "KLINE *@%h :Open proxy found on your host, please visit www.njabl.org/cgi-bin/lookup.cgi?query=%i";
	};

	dnsbl_from = "bopm@spaz.spaznet.info";
	dnsbl_to = "bopm@reports.blitzed.org";
	sendmail = "/usr/sbin/sendmail";
};


scanner {

	/*
	 * Unique name of this scanner.  This is used further down in the
	 * user {} blocks to decide which users get affected by which
	 * scanners.
	 */
	name="default";

	/*
	 * HTTP CONNECT - very common proxy protocol supported by widely known
	 * software such as Squid and Apache.  The most common sort of
	 * insecure proxy and found on a multitude of weird ports too.  Offers
	 * transparent two way TCP connections.
	 */
	protocol = HTTP:80;
	protocol = HTTP:8080;
	protocol = HTTP:3128;
	protocol = HTTP:6588;

	/*
	 * SOCKS4/5 - well known proxy protocols, probably the second most
	 * common for insecure proxies, also offers transparent two way TCP
	 * connections.  Fortunately largely confined to port 1080.
	 */
	protocol = SOCKS4:1080;
	protocol = SOCKS5:1080;

	/*
	 * Cisco routers with a default password (yes, it really does happen).
	 * Also pretty much anything else that will let you telnet to anywhere
	 * else on the internet.  Fortunately these are always on port 23.
	 */
	protocol = ROUTER:23;

	/*
	 * WinGate is commercial windows proxy software which is now not so
	 * common, but still to be found, and helpfully presents an interface
	 * that can be used to telnet out, on port 23.
	 */
	protocol = WINGATE:23;

	/*
	 * The HTTP POST protocol, often dismissed when writing the access
	 * controls for proxies, but sadly can still be used to abused.
	 * Offers only the opportunity to send a single block of data, but
	 * enough of them at once can still make for a devastating flood.
	 * Found on the same ports that HTTP CONNECT proxies inhabit.
	 *
	 * Note that if your ircd has "ping cookies" then clients from HTTP
	 * POST proxies cannot actually ever get onto your network anyway.  If
	 * you leave the checks in then you'll still find some (because some
	 * people IRC from boxes that run them), but if you use BOPM purely as
	 * a protective measure and you have ping cookies, you need not scan
	 * for HTTP POST.
	 */
	protocol = HTTPPOST:80;

	/*
	 * IP this scanner will bind to.  Use this if you need your scans to
	 * come FROM a particular interface on the machine you run BOPM from.
	 * If you don't understand what this means, please leave this
	 * commented out, as this is a major source of support queries!
	 */
#	vhost = "127.0.0.1";

	/* Maximum file descriptors this scanner can use.  Remember that there
	 * will be one FD for each protocol listed above.  As this example
	 * scanner has 8 protocols, it requires 8 FDs per user.  With a 512 FD
	 * limit, this scanner can be used on 64 users _at the same time_.
	 * That should be adequate for most servers.
	 */
	fd = 512;

	/*
	 * Maximum data read from a proxy before considering it closed.  Don't
	 * set this too high, some people have fun setting up lots of ports
	 * that send endless data to tie up your scanner.  4KB is plenty for
	 * any known proxy.
	 */
	max_read = 4096;

	/*
	 * Amount of time (in seconds) before a test is considered timed out.
	 * Again, all but the poorest slowest proxies will be detected within
	 * 30 seconds, and this helps keep resource usage low.
	 */
	timeout = 30;

	/* 
	 * Target IP to tell the proxy to connect to
	 * 
	 * !!! THIS MUST BE CHANGED !!!
	 *
	 * You cannot instruct the proxy to connect to itself! The easiest
	 * thing to do would be to set this to the IP of your ircd and then
	 * keep the default target_strings.
	 *
	 * Please use an IP that is publically reachable from anywhere on the
	 * Internet, because you have no way of knowing where the insecure
	 * proxies will be located.  Just because you and your BOPM can
	 * connect to your ircd on some private IP like 192.168.0.1, does not
	 * mean that the insecure proxies out there on the Internet will be
	 * able to.  And if they never connect, you will never detect them.
	 *
	 * Remember to change this setting for every scanner you configure.
	 *
	 */
	target_ip     = "69.223.78.114";

	/*
	 * Target port to tell the proxy to connect to.  This is usually
	 * something like 6667.  Basically any client-usable port.
	 */
	target_port   = 6667;

	/* 
	 * Target string we check for in the data read back by the scanner.
	 * This should be some string out of the data that your ircd usually
	 * sends on connect.  The example below will work on most
	 * hybrid/bahamut ircds.  Multiple target strings are allowed.
	 *
	 * NOTE: Try to keep the number of target strings to a minimum. Two
	 *       should be fine. One for normal connections and one for throttled
	 *       connections. Comment out any others for efficiency.
	 */

	/* Usually first line sent to client on connection to ircd. 
	 * If your ircd supports a more specific line (see below),
	 * using it will reduce false positives.
	 */
	target_string = "*** Looking up your hostname...";

	/* Some ircds give a source for the NOTICE AUTH (bahamut for example).
	 * It is recommended you use the following instead of the generic
	 * "*** Looking up your hostname..." if your ircd supports it. 
	 * This will reduce the chances of false positives.
	 */
#	target_string = ":server.yournetwork.org NOTICE AUTH :*** Looking up your hostname...";

	/* If you try to connect too fast, you'll be throttled by your own
	 * ircd.  Here's what a hybrid throttle message looks like:
	 */
	target_string = "ERROR :Trying to reconnect too fast.";

	/* And the same for bahamut (comment this out if you're not using bahamut): */
	target_string = "ERROR :Your host is trying to (re)connect too fast -- throttled.";
};

scanner {
	name = "extended";

	protocol = HTTP:81;
	protocol = HTTP:8000;
	protocol = HTTP:8001;
	protocol = HTTP:8081;

	protocol = HTTPPOST:81;
	protocol = HTTPPOST:6588;
#	protocol = HTTPPOST:4480;
	protocol = HTTPPOST:8000;
	protocol = HTTPPOST:8001;
	protocol = HTTPPOST:8080;
	protocol = HTTPPOST:8081;

	/*
	 * IRCnet have seen many socks5 on these ports, more than on the
	 * standard ports even.
	 */
	protocol = SOCKS4:4914;
	protocol = SOCKS4:6826;
	protocol = SOCKS4:7198;
	protocol = SOCKS4:7366;
	protocol = SOCKS4:9036;

	protocol = SOCKS5:4438;
	protocol = SOCKS5:5104;
	protocol = SOCKS5:5113;
	protocol = SOCKS5:5262;
	protocol = SOCKS5:5634;
	protocol = SOCKS5:6552;
	protocol = SOCKS5:6561;
	protocol = SOCKS5:7464;
	protocol = SOCKS5:7810;
	protocol = SOCKS5:8130;
	protocol = SOCKS5:8148;
	protocol = SOCKS5:8520;
	protocol = SOCKS5:8814;
	protocol = SOCKS5:9100;
	protocol = SOCKS5:9186;
	protocol = SOCKS5:9447;
	protocol = SOCKS5:9578;

	fd = 400;

	/* If required you can add settings such as target_ip here
	 * they will override the defaults set in the first scanner
	 * for this and subsequent scanners defined in the config file
	 * This affects the following options:
	 * fd, vhost, target_ip, target_port, target_string, timeout and
	 * max_read.
	 */
};



/*
 * User blocks define what scanners will be used to scan which hostmasks. When
 * a user connects they will be scanned on every scanner {} (above) that
 * matches their host.
 */

user {
	/*
	 * Users matching this host mask will be scanned with all the
	 * protocols in the scanner named.
	 */
	mask = "*!*@*";
	scanner = "default";
};

user {
	/* Connections without ident will match on a vast number of connections
	 * very few proxies run ident though */
#	mask = "*!~*@*";
	mask = "*!squid@*";
	mask = "*!nobody@*";
	mask = "*!www-data@*";
	mask = "*!cache@*";
	mask = "*!CacheFlowS@*";
	mask = "*!*@*www*";
	mask = "*!*@*proxy*";
	mask = "*!*@*cache*";

	scanner = "extended";
};


/*
 * Exempt hosts matching certain strings from any form of scanning or dnsbl.
 * BOPM will check each string against both the hostname and the IP address of
 * the user.
 *
 * There are very few valid reasons to actually use "exempt".  BOPM should
 * never get false positives, and we would like to know very much if it does.
 * One possible scenario is that the machine BOPM runs from is specifically
 * authorized to use certain hosts as proxies, and users from those hosts use
 * your network.  In this case, without exempt, BOPM will scan these hosts,
 * find itself able to use them as proxies, and ban them.
 */
exempt {
	mask = "*!*@127.0.0.1";
};