# File generated by XFdrake (rev 142098)


Section "InputDevice"
    Identifier "Mouse1"
    Driver "mouse"
    Option "Protocol" "ExplorerPS/2"
    Option "Device" "/dev/mouse"
EndSection

Section "InputDevice"
    Identifier "Mouse2"
    Driver "evdev"
    Option "product" "0xc510"
    Option "vendor" "0x046d"
    Option "HWheelRelativeAxisButtons" "7 6"
EndSection

Section "InputDevice"
    Identifier "SynapticsMouse1"
    Driver "synaptics"
    Option "SHMConfig" "on"
EndSection
# File generated by XFdrake (rev 142098)
# **********************************************************************
# Refer to the xorg.conf man page for details about the format of
# this file.
# **********************************************************************

Section "ServerLayout"
    Identifier "layout1"
    InputDevice "Keyboard1" "CoreKeyboard"
    InputDevice "Mouse1" "CorePointer"
    InputDevice "Mouse2" "SendCoreEvents"
    InputDevice "SynapticsMouse1" "AlwaysCore"
    Screen 0  "aticonfig-Screen[0]" 0 0
EndSection

Section "Files"
    # font server independent of the X server to render fonts.
    # minimal fonts to allow X to run without xfs
    FontPath "unix/:-1"
    FontPath "/usr/share/fonts/misc:unscaled"
EndSection

Section "Module"
    Load "dbe" # Double-Buffering Extension
    Load "v4l" # Video for Linux
    Load "extmod"
    Load "type1"
    Load "freetype"
    Load "glx" # 3D layer
    Load "dri" # direct rendering
EndSection

Section "ServerFlags"
    #DontZap # disable <Crtl><Alt><BS> (server abort)
    
    # allows the server to start up even if the mouse does not work
    #DontZoom # disable <Crtl><Alt><KP_+>/<KP_-> (resolution switching)
    Option "allowmouseopenfail"
EndSection

Section "InputDevice"
    Identifier "Keyboard1"
    Driver "kbd"
    Option "XkbModel" "pc105"
    Option "XkbLayout" "us"
    Option "XkbOptions" "compose:rwin"
EndSection

Section "Monitor"
    # TV fullscreen mode or DVD fullscreen output.
    # 768x576 @ 79 Hz, 50 kHz hsync
    Identifier "monitor1"
    VendorName "Generic"
    ModelName "Flat Panel 1280x768"
    HorizSync 31.5 - 90.0
    VertRefresh 60.0 - 60.0
    ModeLine "768x576" 50.0 768 832 846 1000 576 590 595 630
    ModeLine "768x576" 63.1 768 800 960 1024 576 578 590 616
    ModeLine "1280x768_120" 173.8 1280 1376 1520 1760 768 769 772 823 -hsync +vsync
    ModeLine "1280x768_100" 142.0 1280 1376 1512 1744 768 769 772 814 -hsync +vsync
    ModeLine "1280x768_85" 118.5 1280 1368 1504 1728 768 769 772 807 -hsync +vsync
    ModeLine "1280x768_75" 103.0 1280 1360 1496 1712 768 769 772 802 -hsync +vsync
    ModeLine "1280x768_60" 80.1 1280 1344 1480 1680 768 769 772 795 -hsync +vsync
    ModeLine "1280x768_50" 65.2 1280 1336 1464 1648 768 769 772 791 -hsync +vsync
EndSection

Section "Monitor"
    Identifier "aticonfig-Monitor[0]"
    Option "VendorName" "ATI Proprietary Driver"
    Option "ModelName" "Generic Autodetecting Monitor"
    Option "DPMS" "true"
EndSection

Section "Device"
    # === Screen Management ===
    # Note: When OpenGL Overlay is enabled, Video Overlay
    # will be disabled automatically
    Identifier "device1"
    VendorName "ATI Technologies Inc"
    BoardName "ATI Radeon 9500 - X850"
    Driver "ati"
    Option "DPMS"
    Option "FSAAMSPosY1" "0.000000"
    Option "StereoSyncEnable" "1"
    
    # === disable PnP Monitor  ===
    #Option "NoDDC"
    Option "FSAAMSPosX5" "0.000000"
    Option "FSAAMSPosX2" "0.000000"
    Option "FSAAMSPosY4" "0.000000"
    Option "FSAAMSPosX4" "0.000000"
    Option "FSAAMSPosY0" "0.000000"
    Option "FSAADisableGamma" "no"
    
    # === Video Overlay for the Xv extension ===
    Option "VideoOverlay" "on"
    Option "GammaCorrectionI"           "0x06419064"
    Option "ForceGenericCPU" "no"
    Option "VRefresh2" "unspecified"
    Option "CenterMode" "off"
    Option "FSAAMSPosY5" "0.000000"
    Option "IgnoreEDID" "off"
    
    # === OpenGL Overlay ===
    Option "OpenGLOverlay" "off"
    Option "FSAACustomizeMSPos" "no"
    
    # === FSAA ===
    Option "FSAAScale" "1"
    
    # === FireGL DDX driver module specific settings ===
    Option "DesktopSetup" "0x00000000"
    Option "HSync2" "unspecified"
    Option "TVHStartAdj" "0"
    Option "FSAAMSPosX0" "0.000000"
    Option "no_dri" "no"
    Option "GammaCorrectionI" "0x00000000"
    Option "BlockSignalsOnLock" "on"
    Option "FSAAMSPosX1" "0.000000"
    Option "UseInternalAGPGART" "no"
    Option "MonitorLayout" "AUTO, AUTO"
    
    # === Misc Options ===
    Option "UseFastTLS" "0"
    
    # === disable/enable XAA/DRI ===
    Option "no_accel" "no"
    
    # === OpenGL specific profiles/settings ===
    Option "Capabilities" "0x00000000"
    Option "FSAAMSPosY3" "0.000000"
    Option "TVColorAdj" "0"
    Option "TVVPosAdj" "0"
    Option "TVStandard" "NTSC-M"
    Option "FSAAMSPosY2" "0.000000"
    
    # === TV-out Management ===
    Option "NoTV" "yes"
    Option "TVHPosAdj" "0"
    Option "TVHSizeAdj" "0"
    
    # === QBS Support ===
    Option "Stereo" "off"
    Option "ScreenOverlap" "0"
    Option "FSAAMSPosX3" "0.000000"
    Option "TVVSizeAdj" "0"
EndSection

Section "Device"
    Identifier "aticonfig-Device[0]"
    Driver "fglrx"
EndSection

Section "Screen"
    Identifier "screen1"
    Device "device1"
    Monitor "monitor1"
    DefaultDepth 24
    
    Subsection "Display"
        Depth 8
        Modes "1280x768"
    EndSubsection
    
    Subsection "Display"
        Depth 15
        Modes "1280x768"
    EndSubsection
    
    Subsection "Display"
        Depth 16
        Modes "1280x768"
    EndSubsection
    
    Subsection "Display"
        Depth 24
        Modes "1280x768"
    EndSubsection
EndSection

Section "Screen"
    Identifier "aticonfig-Screen[0]"
    Device "aticonfig-Device[0]"
    Monitor "aticonfig-Monitor[0]"
    DefaultDepth 24
    
    Subsection "Display"
        Depth 24
        Viewport 0 0
    EndSubsection
EndSection