# daemon config 
telnet_port 4444 
gdb_port 3333 
daemon_startup reset 

# interface 
interface parport 
parport_port /dev/parport0 
parport_cable wiggler 
jtag_speed 0 
# use combined on interfaces or targets that can't set TRST/SRST separately 
reset_config trst_and_srst

# jtag scan chain 
#format L IRC IRCM IDCODE (Length, IR Capture, IR Capture Mask, IDCODE) 
jtag_device 4 0x1 0xf 0xe 

jtag_nsrst_delay 500 
jtag_ntrst_delay 500 

# target configuration 
# target <type> <endianess> <reset_mode> 
# if chain_pos is not zero it seg faults 
target arm926ejs little reset_run 0 
#target_script 0 reset h2294_init.script 
run_and_halt_time 0 30 
working_area 0 0xD0000000 0x40000 nobackup 

# flash configuration 
# flash bank <driver> <base> <size> <chip_width> <bus_width> [driver_options ...] 
flash bank lpc2000 0x0 0x40000 0 0 lpc2000_v1 0 14765 calc_checksum 
flash bank cfi 0x80000000 0x400000 2 2 0