[ 49.508000] sonypi: Sony Programmable I/O Controller Driver v1.26. [ 49.532000] sonypi: detected type2 model, verbose = 0, fnkeyinit = off, camera = off, compat = off, mask = 0xffffffff, useinput = on, acpi = on [ 49.532000] sonypi: enabled at irq=11, port1=0x1080, port2=0x1084 [ 49.532000] sonypi: device allocated minor is 61 [ 49.584000] input: Sony Vaio Jogdial as /class/input/input8 [ 49.672000] input: Sony Vaio Keys as /class/input/input9 [ 216.040000] NET: Registered protocol family 10 [ 216.040000] lo: Disabled Privacy Extensions [ 216.040000] ADDRCONF(NETDEV_UP): eth0: link is not ready [ 227.000000] eth1: no IPv6 routers present root@vaio:~# dmesg [ 0.000000] Linux version 2.6.20-15-386 (root@palmer) (gcc version 4.1.2 (Ubuntu 4.1.2-0ubuntu4)) #2 Sun Apr 15 07:34:00 UTC 2007 (Ubuntu 2.6.20-15.27-386) [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] sanitize start [ 0.000000] sanitize end [ 0.000000] copy_e820_map() start: 0000000000000000 size: 000000000009f800 end: 000000000009f800 type: 1 [ 0.000000] copy_e820_map() type is E820_RAM [ 0.000000] copy_e820_map() start: 000000000009f800 size: 0000000000000800 end: 00000000000a0000 type: 2 [ 0.000000] copy_e820_map() start: 00000000000d8000 size: 0000000000028000 end: 0000000000100000 type: 2 [ 0.000000] copy_e820_map() start: 0000000000100000 size: 000000001f5e0000 end: 000000001f6e0000 type: 1 [ 0.000000] copy_e820_map() type is E820_RAM [ 0.000000] copy_e820_map() start: 000000001f6e0000 size: 000000000000c000 end: 000000001f6ec000 type: 3 [ 0.000000] copy_e820_map() start: 000000001f6ec000 size: 0000000000014000 end: 000000001f700000 type: 4 [ 0.000000] copy_e820_map() start: 000000001f700000 size: 0000000000900000 end: 0000000020000000 type: 2 [ 0.000000] copy_e820_map() start: 00000000fec10000 size: 0000000000010000 end: 00000000fec20000 type: 2 [ 0.000000] copy_e820_map() start: 00000000ff800000 size: 0000000000400000 end: 00000000ffc00000 type: 2 [ 0.000000] copy_e820_map() start: 00000000fffffc00 size: 0000000000000400 end: 0000000100000000 type: 2 [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f800 (usable) [ 0.000000] BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 00000000000d8000 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 000000001f6e0000 (usable) [ 0.000000] BIOS-e820: 000000001f6e0000 - 000000001f6ec000 (ACPI data) [ 0.000000] BIOS-e820: 000000001f6ec000 - 000000001f700000 (ACPI NVS) [ 0.000000] BIOS-e820: 000000001f700000 - 0000000020000000 (reserved) [ 0.000000] BIOS-e820: 00000000fec10000 - 00000000fec20000 (reserved) [ 0.000000] BIOS-e820: 00000000ff800000 - 00000000ffc00000 (reserved) [ 0.000000] BIOS-e820: 00000000fffffc00 - 0000000100000000 (reserved) [ 0.000000] 0MB HIGHMEM available. [ 0.000000] 502MB LOWMEM available. [ 0.000000] Entering add_active_range(0, 0, 128736) 0 entries of 256 used [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0 -> 4096 [ 0.000000] Normal 4096 -> 128736 [ 0.000000] HighMem 128736 -> 128736 [ 0.000000] early_node_map[1] active PFN ranges [ 0.000000] 0: 0 -> 128736 [ 0.000000] On node 0 totalpages: 128736 [ 0.000000] DMA zone: 32 pages used for memmap [ 0.000000] DMA zone: 0 pages reserved [ 0.000000] DMA zone: 4064 pages, LIFO batch:0 [ 0.000000] Normal zone: 973 pages used for memmap [ 0.000000] Normal zone: 123667 pages, LIFO batch:31 [ 0.000000] HighMem zone: 0 pages used for memmap [ 0.000000] DMI 2.3 present. [ 0.000000] ACPI: RSDP (v000 SONY ) @ 0x000f69b0 [ 0.000000] ACPI: RSDT (v001 SONY G9 0x20050119 PTL 0x00000000) @ 0x1f6e79df [ 0.000000] ACPI: FADT (v002 SONY G9 0x20050119 PTL 0x00000050) @ 0x1f6ebec2 [ 0.000000] ACPI: BOOT (v001 SONY G9 0x20050119 PTL 0x00000001) @ 0x1f6ebfd8 [ 0.000000] ACPI: SSDT (v001 SONY G9 0x20050119 PTL 0x00000000) @ 0x1f6e7a0f [ 0.000000] ACPI: DSDT (v001 SONY G9 0x20050119 PTL 0x0100000e) @ 0x00000000 [ 0.000000] ACPI: PM-Timer IO Port: 0x1008 [ 0.000000] Allocating PCI resources starting at 30000000 (gap: 20000000:dec10000) [ 0.000000] Detected 1687.323 MHz processor. [ 6.101263] Built 1 zonelists. Total pages: 127731 [ 6.101265] Kernel command line: root=UUID=c5a1916c-56cf-4fbf-8cb7-8b4609ac133f ro splash [ 6.101434] Local APIC disabled by BIOS -- you can enable it with "lapic" [ 6.101440] mapped APIC to ffffd000 (013f2000) [ 6.101444] Enabling fast FPU save and restore... done. [ 6.101447] Enabling unmasked SIMD FPU exception support... done. [ 6.101455] Initializing CPU#0 [ 6.101519] PID hash table entries: 2048 (order: 11, 8192 bytes) [ 6.102922] Console: colour VGA+ 80x25 [ 6.105462] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes) [ 6.105769] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes) [ 6.119044] Memory: 498384k/514944k available (1916k kernel code, 16008k reserved, 864k data, 328k init, 0k highmem) [ 6.119126] virtual kernel memory layout: [ 6.119127] fixmap : 0xfffa9000 - 0xfffff000 ( 344 kB) [ 6.119128] pkmap : 0xff800000 - 0xffc00000 (4096 kB) [ 6.119129] vmalloc : 0xe0000000 - 0xff7fe000 ( 503 MB) [ 6.119131] lowmem : 0xc0000000 - 0xdf6e0000 ( 502 MB) [ 6.119132] .init : 0xc03ba000 - 0xc040c000 ( 328 kB) [ 6.119133] .data : 0xc02df353 - 0xc03b7434 ( 864 kB) [ 6.119135] .text : 0xc0100000 - 0xc02df353 (1916 kB) [ 6.119533] Checking if this processor honours the WP bit even in supervisor mode... Ok. [ 6.197387] Calibrating delay using timer specific routine.. 3376.60 BogoMIPS (lpj=6753203) [ 6.197513] Security Framework v1.0.0 initialized [ 6.197569] SELinux: Disabled at boot. [ 6.197625] Mount-cache hash table entries: 512 [ 6.197774] CPU: After generic identify, caps: afe9f9bf 00000000 00000000 00000000 00000180 00000000 00000000 [ 6.197785] CPU: L1 I cache: 32K, L1 D cache: 32K [ 6.197864] CPU: L2 cache: 2048K [ 6.197912] CPU: After all inits, caps: afe9f9bf 00000000 00000000 00002040 00000180 00000000 00000000 [ 6.197920] Compat vDSO mapped to ffffe000. [ 6.197972] Remapping vsyscall page to ffffe000 [ 6.198027] CPU: Intel(R) Pentium(R) M processor 1.70GHz stepping 06 [ 6.198138] Checking 'hlt' instruction... OK. [ 6.213777] Early unpacking initramfs... done [ 6.596975] ACPI: Core revision 20060707 [ 6.597719] ACPI: Looking for DSDT in initramfs... file /DSDT.aml not found, using machine DSDT. [ 6.601575] Booting paravirtualized kernel on bare hardware [ 6.601685] Time: 20:19:41 Date: 04/15/107 [ 6.601758] NET: Registered protocol family 16 [ 6.601876] EISA bus registered [ 6.601925] ACPI: bus type pci registered [ 6.603030] PCI: PCI BIOS revision 2.10 entry at 0xfd9b2, last bus=2 [ 6.603083] PCI: Using configuration type 1 [ 6.603132] Setting up standard PCI resources [ 6.614508] ACPI: Interpreter enabled [ 6.614558] ACPI: Using PIC for interrupt routing [ 6.614837] ACPI: PCI Root Bridge [PCI0] (0000:00) [ 6.614892] PCI: Probing PCI hardware (bus 00) [ 6.615526] Boot video device is 0000:00:02.0 [ 6.615761] PCI quirk: region 1000-107f claimed by ICH4 ACPI/GPIO/TCO [ 6.615815] PCI quirk: region 1180-11bf claimed by ICH4 GPIO [ 6.616160] PCI: Firmware left 0000:02:08.0 e100 interrupts enabled, disabling [ 6.616312] PCI: Transparent bridge - 0000:00:1e.0 [ 6.616405] PCI: Bus #03 (-#06) is hidden behind transparent bridge #02 (-#02) (try 'pci=assign-busses') [ 6.616476] Please report the result to linux-kernel to fix this permanently [ 6.616542] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 6.620660] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIB._PRT] [ 6.621362] ACPI: PCI Interrupt Link [LNKA] (IRQs *9) [ 6.621686] ACPI: PCI Interrupt Link [LNKB] (IRQs 9) *0, disabled. [ 6.622069] ACPI: PCI Interrupt Link [LNKC] (IRQs 9) *0, disabled. [ 6.622449] ACPI: PCI Interrupt Link [LNKD] (IRQs *9) [ 6.622774] ACPI: PCI Interrupt Link [LNKE] (IRQs *9) [ 6.623096] ACPI: PCI Interrupt Link [LNKF] (IRQs 5) *0, disabled. [ 6.623478] ACPI: PCI Interrupt Link [LNKG] (IRQs 9) *0, disabled. [ 6.623860] ACPI: PCI Interrupt Link [LNKH] (IRQs 9) *0, disabled. [ 6.625962] Linux Plug and Play Support v0.97 (c) Adam Belay [ 6.626018] pnp: PnP ACPI init [ 6.627633] pnp: PnP ACPI: found 9 devices [ 6.627685] PnPBIOS: Disabled by ACPI PNP [ 6.627765] PCI: Using ACPI for IRQ routing [ 6.627815] PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report [ 6.633107] NET: Registered protocol family 8 [ 6.633156] NET: Registered protocol family 20 [ 6.633469] PCI: Ignore bogus resource 6 [0:0] of 0000:00:02.0 [ 6.633532] PCI: Bus 3, cardbus bridge: 0000:02:04.0 [ 6.633583] IO window: 00003400-000034ff [ 6.633633] IO window: 00003800-000038ff [ 6.633683] PREFETCH window: 30000000-33ffffff [ 6.633735] MEM window: 38000000-3bffffff [ 6.633785] PCI: Bridge: 0000:00:1e.0 [ 6.633834] IO window: 3000-3fff [ 6.633884] MEM window: e0200000-e02fffff [ 6.633934] PREFETCH window: 30000000-33ffffff [ 6.633993] PCI: Setting latency timer of device 0000:00:1e.0 to 64 [ 6.634155] ACPI: PCI Interrupt Link [LNKE] enabled at IRQ 9 [ 6.634207] PCI: setting IRQ 9 as level-triggered [ 6.634210] ACPI: PCI Interrupt 0000:02:04.0[A] -> Link [LNKE] -> GSI 9 (level, low) -> IRQ 9 [ 6.634353] NET: Registered protocol family 2 [ 6.664757] IP route cache hash table entries: 4096 (order: 2, 16384 bytes) [ 6.664867] TCP established hash table entries: 16384 (order: 4, 65536 bytes) [ 6.664975] TCP bind hash table entries: 8192 (order: 3, 32768 bytes) [ 6.665056] TCP: Hash tables configured (established 16384 bind 8192) [ 6.665109] TCP reno registered [ 6.676800] checking if image is initramfs... it is [ 7.431897] Freeing initrd memory: 8056k freed [ 7.432195] Simple Boot Flag at 0x36 set to 0x1 [ 7.432402] audit: initializing netlink socket (disabled) [ 7.432468] audit(1179260381.516:1): initialized [ 7.432636] VFS: Disk quotas dquot_6.5.1 [ 7.432703] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 7.432805] io scheduler noop registered [ 7.432882] io scheduler anticipatory registered [ 7.432959] io scheduler deadline registered [ 7.433042] io scheduler cfq registered (default) [ 7.433423] isapnp: Scanning for PnP cards... [ 7.786848] isapnp: No Plug & Play device found [ 7.807982] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled [ 7.808918] ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 9 [ 7.808973] ACPI: PCI Interrupt 0000:00:1f.6[B] -> Link [LNKB] -> GSI 9 (level, low) -> IRQ 9 [ 7.809104] ACPI: PCI interrupt for device 0000:00:1f.6 disabled [ 7.809228] mice: PS/2 mouse device common for all mice [ 7.809735] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize [ 7.810012] input: Macintosh mouse button emulation as /class/input/input0 [ 7.810098] Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 [ 7.810152] ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx [ 7.810427] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12 [ 7.813435] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 7.813490] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 7.813647] EISA: Probing bus 0 at eisa.0 [ 7.813702] Cannot allocate resource for EISA slot 1 [ 7.813753] Cannot allocate resource for EISA slot 2 [ 7.813804] Cannot allocate resource for EISA slot 3 [ 7.813872] EISA: Detected 0 cards. [ 7.843965] TCP cubic registered [ 7.844018] NET: Registered protocol family 1 [ 7.844084] Using IPI Shortcut mode [ 7.844186] ACPI: (supports S0 S3 S4 S5) [ 7.844409] Magic number: 7:513:346 [ 7.844560] hash matches device tty63 [ 7.844819] Freeing unused kernel memory: 328k freed [ 7.847037] Time: tsc clocksource has been installed. [ 7.857763] input: AT Translated Set 2 keyboard as /class/input/input1 [ 9.031484] Capability LSM initialized [ 9.054483] device-mapper: ioctl: 4.11.0-ioctl (2006-10-12) initialised: dm-devel@redhat.com [ 9.089109] ACPI: CPU0 (power states: C1[C1] C2[C2]) [ 9.089115] ACPI: Processor [CPU0] (supports 8 throttling states) [ 2.992000] ACPI: Thermal Zone [ATF0] (59 C) [ 3.000000] Time: acpi_pm clocksource has been installed. [ 3.092000] md: linear personality registered for level -1 [ 3.096000] md: multipath personality registered for level -4 [ 3.100000] md: raid0 personality registered for level 0 [ 3.104000] md: raid1 personality registered for level 1 [ 3.104000] raid5: automatically using best checksumming function: pIII_sse [ 3.124000] pIII_sse : 4385.000 MB/sec [ 3.124000] raid5: using function: pIII_sse (4385.000 MB/sec) [ 3.192000] raid6: int32x1 564 MB/s [ 3.260000] raid6: int32x2 665 MB/s [ 3.328000] raid6: int32x4 549 MB/s [ 3.396000] raid6: int32x8 462 MB/s [ 3.464000] raid6: mmxx1 1693 MB/s [ 3.532000] raid6: mmxx2 1935 MB/s [ 3.600000] raid6: sse1x1 1236 MB/s [ 3.668000] raid6: sse1x2 2024 MB/s [ 3.736000] raid6: sse2x1 2216 MB/s [ 3.804000] raid6: sse2x2 2471 MB/s [ 3.804000] raid6: using algorithm sse2x2 (2471 MB/s) [ 3.804000] md: raid6 personality registered for level 6 [ 3.804000] md: raid5 personality registered for level 5 [ 3.804000] md: raid4 personality registered for level 4 [ 3.832000] md: raid10 personality registered for level 10 [ 4.088000] usbcore: registered new interface driver usbfs [ 4.088000] usbcore: registered new interface driver hub [ 4.088000] usbcore: registered new device driver usb [ 4.088000] USB Universal Host Controller Interface driver v3.0 [ 4.088000] ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 9 [ 4.088000] ACPI: PCI Interrupt 0000:00:1d.0[A] -> Link [LNKA] -> GSI 9 (level, low) -> IRQ 9 [ 4.088000] PCI: Setting latency timer of device 0000:00:1d.0 to 64 [ 4.088000] uhci_hcd 0000:00:1d.0: UHCI Host Controller [ 4.088000] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1 [ 4.088000] uhci_hcd 0000:00:1d.0: irq 9, io base 0x00001820 [ 4.088000] usb usb1: configuration #1 chosen from 1 choice [ 4.088000] hub 1-0:1.0: USB hub found [ 4.088000] hub 1-0:1.0: 2 ports detected [ 4.168000] ieee1394: Initialized config rom entry `ip1394' [ 4.184000] e100: Intel(R) PRO/100 Network Driver, 3.5.17-k2-NAPI [ 4.184000] e100: Copyright(c) 1999-2006 Intel Corporation [ 4.192000] ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 9 [ 4.192000] ACPI: PCI Interrupt 0000:00:1d.1[B] -> Link [LNKD] -> GSI 9 (level, low) -> IRQ 9 [ 4.192000] PCI: Setting latency timer of device 0000:00:1d.1 to 64 [ 4.192000] uhci_hcd 0000:00:1d.1: UHCI Host Controller [ 4.192000] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2 [ 4.192000] uhci_hcd 0000:00:1d.1: irq 9, io base 0x00001840 [ 4.192000] usb usb2: configuration #1 chosen from 1 choice [ 4.192000] hub 2-0:1.0: USB hub found [ 4.192000] hub 2-0:1.0: 2 ports detected [ 4.300000] SCSI subsystem initialized [ 4.308000] libata version 2.20 loaded. [ 4.308000] ata_piix 0000:00:1f.1: version 2.10ac1 [ 4.308000] PCI: Enabling device 0000:00:1f.1 (0005 -> 0007) [ 4.308000] ACPI: Unable to derive IRQ for device 0000:00:1f.1 [ 4.308000] ACPI: PCI Interrupt 0000:00:1f.1[A]: no GSI [ 4.308000] PCI: Setting latency timer of device 0000:00:1f.1 to 64 [ 4.308000] ata1: PATA max UDMA/100 cmd 0x000101f0 ctl 0x000103f6 bmdma 0x00011810 irq 14 [ 4.308000] ata2: PATA max UDMA/100 cmd 0x00010170 ctl 0x00010376 bmdma 0x00011818 irq 15 [ 4.312000] scsi0 : ata_piix [ 4.476000] ata1.00: ata_hpa_resize 1: sectors = 117210240, hpa_sectors = 117210240 [ 4.476000] ata1.00: ATA-6: IC25N060ATMR04-0, MO3OAD1A, max UDMA/100 [ 4.476000] ata1.00: 117210240 sectors, multi 16: LBA48 [ 4.484000] ata1.00: ata_hpa_resize 1: sectors = 117210240, hpa_sectors = 117210240 [ 4.484000] ata1.00: configured for UDMA/100 [ 4.484000] scsi1 : ata_piix [ 4.536000] usb 2-1: new low speed USB device using uhci_hcd and address 2 [ 4.732000] usb 2-1: configuration #1 chosen from 1 choice [ 4.748000] usbcore: registered new interface driver hiddev [ 4.760000] input: PS/2+USB Mouse as /class/input/input2 [ 4.760000] input: USB HID v1.00 Mouse [PS/2+USB Mouse] on usb-0000:00:1d.1-1 [ 4.760000] usbcore: registered new interface driver usbhid [ 4.760000] drivers/usb/input/hid-core.c: v2.6:USB HID core driver [ 4.804000] ata2.00: ATAPI, max UDMA/33 [ 4.968000] ata2.00: configured for UDMA/33 [ 4.968000] scsi 0:0:0:0: Direct-Access ATA IC25N060ATMR04-0 MO3O PQ: 0 ANSI: 5 [ 4.972000] scsi 1:0:0:0: CD-ROM PIONEER DVD-RW DVR-K14 1.10 PQ: 0 ANSI: 5 [ 4.972000] ACPI: PCI Interrupt Link [LNKG] enabled at IRQ 9 [ 4.972000] ACPI: PCI Interrupt 0000:02:04.2[C] -> Link [LNKG] -> GSI 9 (level, low) -> IRQ 9 [ 5.024000] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[9] MMIO=[e0207000-e02077ff] Max Packet=[2048] IR/IT contexts=[4/8] [ 5.024000] ACPI: PCI Interrupt 0000:02:08.0[A] -> Link [LNKE] -> GSI 9 (level, low) -> IRQ 9 [ 5.048000] ACPI: PCI Interrupt Link [LNKH] enabled at IRQ 9 [ 5.048000] ACPI: PCI Interrupt 0000:00:1d.7[D] -> Link [LNKH] -> GSI 9 (level, low) -> IRQ 9 [ 5.048000] PCI: Setting latency timer of device 0000:00:1d.7 to 64 [ 5.048000] ehci_hcd 0000:00:1d.7: EHCI Host Controller [ 5.048000] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 3 [ 5.048000] ehci_hcd 0000:00:1d.7: debug port 1 [ 5.048000] PCI: cache line size of 32 is not supported by device 0000:00:1d.7 [ 5.048000] ehci_hcd 0000:00:1d.7: irq 9, io mem 0xe0100000 [ 5.052000] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 [ 5.052000] usb usb3: configuration #1 chosen from 1 choice [ 5.052000] hub 3-0:1.0: USB hub found [ 5.052000] hub 3-0:1.0: 6 ports detected [ 5.052000] e100: eth0: e100_probe: addr 0xe0205000, irq 9, MAC addr 00:01:4A:07:1F:08 [ 5.060000] SCSI device sda: 117210240 512-byte hdwr sectors (60012 MB) [ 5.060000] sda: Write Protect is off [ 5.060000] sda: Mode Sense: 00 3a 00 00 [ 5.060000] SCSI device sda: write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 5.060000] SCSI device sda: 117210240 512-byte hdwr sectors (60012 MB) [ 5.060000] sda: Write Protect is off [ 5.060000] sda: Mode Sense: 00 3a 00 00 [ 5.060000] SCSI device sda: write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 5.060000] sda:<6>usb 2-1: USB disconnect, address 2 [ 5.412000] sda1 sda2 sda3 sda4 [ 5.432000] sd 0:0:0:0: Attached scsi disk sda [ 5.436000] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 5.436000] scsi 1:0:0:0: Attached scsi generic sg1 type 5 [ 5.468000] sr0: scsi3-mmc drive: 24x/24x writer cd/rw xa/form2 cdda tray [ 5.468000] Uniform CD-ROM driver Revision: 3.20 [ 5.468000] sr 1:0:0:0: Attached scsi CD-ROM sr0 [ 5.580000] usb 2-1: new low speed USB device using uhci_hcd and address 3 [ 5.776000] usb 2-1: configuration #1 chosen from 1 choice [ 5.780000] kjournald starting. Commit interval 5 seconds [ 5.780000] EXT3-fs: mounted filesystem with ordered data mode. [ 5.796000] input: PS/2+USB Mouse as /class/input/input3 [ 5.796000] input: USB HID v1.00 Mouse [PS/2+USB Mouse] on usb-0000:00:1d.1-1 [ 6.296000] ieee1394: Host added: ID:BUS[0-00:1023] GUID[0800460301ca590c] [ 11.376000] Linux agpgart interface v0.102 (c) Dave Jones [ 11.380000] agpgart: Detected an Intel 855 Chipset. [ 11.384000] agpgart: Detected 8060K stolen memory. [ 11.392000] agpgart: AGP aperture is 128M @ 0xe8000000 [ 11.568000] iTCO_vendor_support: vendor-support=0 [ 11.568000] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.01 (11-Nov-2006) [ 11.568000] iTCO_wdt: failed to reset NO_REBOOT flag, reboot disabled by hardware [ 11.568000] iTCO_wdt: No card detected [ 11.664000] intel_rng: FWH not detected [ 11.732000] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 11.764000] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 12.320000] Real Time Clock Driver v1.12ac [ 12.788000] Yenta: CardBus bridge found at 0000:02:04.0 [104d:818f] [ 12.788000] Yenta: Enabling burst memory read transactions [ 12.788000] Yenta: Using CSCINT to route CSC interrupts to PCI [ 12.788000] Yenta: Routing CardBus interrupts to PCI [ 12.788000] Yenta TI: socket 0000:02:04.0, mfunc 0x01001b22, devctl 0x64 [ 12.880000] ieee80211_crypt: registered algorithm 'NULL' [ 12.880000] ieee80211: 802.11 data/management/control stack, git-1.1.13 [ 12.880000] ieee80211: Copyright (C) 2004-2005 Intel Corporation [ 12.936000] ipw2200: Intel(R) PRO/Wireless 2200/2915 Network Driver, 1.2.0kmprq [ 12.936000] ipw2200: Copyright(c) 2003-2006 Intel Corporation [ 13.040000] Yenta: ISA IRQ mask 0x0cf8, PCI irq 9 [ 13.040000] Socket status: 30000006 [ 13.040000] Yenta: Raising subordinate bus# of parent bus (#02) from #02 to #06 [ 13.040000] pcmcia: parent PCI bridge I/O window: 0x3000 - 0x3fff [ 13.040000] cs: IO port probe 0x3000-0x3fff: clean. [ 13.040000] pcmcia: parent PCI bridge Memory window: 0xe0200000 - 0xe02fffff [ 13.040000] pcmcia: parent PCI bridge Memory window: 0x30000000 - 0x33ffffff [ 13.044000] ACPI: PCI Interrupt Link [LNKF] enabled at IRQ 5 [ 13.044000] PCI: setting IRQ 5 as level-triggered [ 13.044000] ACPI: PCI Interrupt 0000:02:04.3[B] -> Link [LNKF] -> GSI 5 (level, low) -> IRQ 5 [ 13.048000] ACPI: PCI Interrupt 0000:02:0b.0[A] -> Link [LNKD] -> GSI 9 (level, low) -> IRQ 9 [ 13.048000] ipw2200: Detected Intel PRO/Wireless 2200BG Network Connection [ 13.076000] tifm_7xx1: sd card detected in socket 0 [ 13.080000] input: PS/2 Mouse as /class/input/input4 [ 13.100000] input: AlpsPS/2 ALPS GlidePoint as /class/input/input5 [ 13.888000] ipw2200: Detected geography ZZD (13 802.11bg channels, 0 802.11a channels) [ 13.888000] ACPI: PCI Interrupt 0000:00:1f.5[B] -> Link [LNKB] -> GSI 9 (level, low) -> IRQ 9 [ 13.888000] PCI: Setting latency timer of device 0000:00:1f.5 to 64 [ 14.040000] cs: IO port probe 0x100-0x3af: clean. [ 14.040000] cs: IO port probe 0x3e0-0x4ff: excluding 0x4d0-0x4d7 [ 14.040000] cs: IO port probe 0x820-0x8ff: clean. [ 14.044000] cs: IO port probe 0xc00-0xcf7: clean. [ 14.044000] cs: IO port probe 0xa00-0xaff: clean. [ 14.708000] intel8x0_measure_ac97_clock: measured 55510 usecs [ 14.708000] intel8x0: clocking to 48000 [ 15.324000] lp: driver loaded but no devices found [ 15.568000] fuse init (API version 7.8) [ 15.904000] Adding 1052248k swap on /dev/disk/by-uuid/074f8937-fbc5-45d9-ae9b-1e44475fa814. Priority:-1 extents:1 across:1052248k [ 16.292000] EXT3 FS on sda3, internal journal [ 16.732000] NTFS driver 2.1.28 [Flags: R/O MODULE]. [ 16.732000] kjournald starting. Commit interval 5 seconds [ 16.732000] EXT3 FS on sda2, internal journal [ 16.732000] EXT3-fs: mounted filesystem with ordered data mode. [ 18.668000] NET: Registered protocol family 17 [ 33.076000] ACPI: AC Adapter [ACAD] (on-line) [ 33.108000] ACPI: Battery Slot [BAT1] (battery absent) [ 33.164000] input: Lid Switch as /class/input/input6 [ 33.168000] ACPI: Lid Switch [LID0] [ 33.208000] input: Power Button (CM) as /class/input/input7 [ 33.212000] ACPI: Power Button (CM) [PWRB] [ 33.228000] Using specific hotkey driver [ 33.260000] No dock devices found. [ 33.328000] ibm_acpi: ec object not found [ 33.400000] ACPI: Video Device [GFX0] (multi-head: yes rom: yes post: no) [ 33.404000] ACPI Sony Notebook Control Driver v0.2 successfully installed [ 33.420000] pcc_acpi: loading... [ 48.488000] [drm] Initialized drm 1.1.0 20060810 [ 48.492000] ACPI: PCI Interrupt 0000:00:02.0[A] -> Link [LNKA] -> GSI 9 (level, low) -> IRQ 9 [ 48.492000] [drm] Initialized i915 1.6.0 20060119 on minor 0 [ 48.496000] [drm] Initialized i915 1.6.0 20060119 on minor 1 [ 49.508000] sonypi: Sony Programmable I/O Controller Driver v1.26. [ 49.532000] sonypi: detected type2 model, verbose = 0, fnkeyinit = off, camera = off, compat = off, mask = 0xffffffff, useinput = on, acpi = on [ 49.532000] sonypi: enabled at irq=11, port1=0x1080, port2=0x1084 [ 49.532000] sonypi: device allocated minor is 61 [ 49.584000] input: Sony Vaio Jogdial as /class/input/input8 [ 49.672000] input: Sony Vaio Keys as /class/input/input9 [ 216.040000] NET: Registered protocol family 10 [ 216.040000] lo: Disabled Privacy Extensions [ 216.040000] ADDRCONF(NETDEV_UP): eth0: link is not ready [ 227.000000] eth1: no IPv6 routers present