willie@localhost ~ $ dmesg
TCP cubic registered
NET: Registered protocol family 1
NET: Registered protocol family 17
Using IPI Shortcut mode
ACPI: (supports S0 S1 S3 S4 S5)
Freeing unused kernel memory: 204k freed
Time: tsc clocksource has been installed.
input: PS/2 Mouse as /class/input/input1
input: AlpsPS/2 ALPS GlidePoint as /class/input/input2
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
Initializing USB Mass Storage driver...
usbcore: registered new interface driver usb-storage
USB Mass Storage support registered.
USB Universal Host Controller Interface driver v3.0
ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 5
ACPI: PCI Interrupt 0000:00:07.2[D] -> Link [LNKD] -> GSI 5 (level, low) -> IRQ 5
uhci_hcd 0000:00:07.2: UHCI Host Controller
uhci_hcd 0000:00:07.2: new USB bus registered, assigned bus number 1
uhci_hcd 0000:00:07.2: irq 5, io base 0x00001400
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI)
usbcore: registered new interface driver hiddev
usbcore: registered new interface driver usbhid
drivers/usb/input/hid-core.c: v2.6:USB HID core driver
sl811: driver sl811-hcd, 19 May 2005
libata version 2.00 loaded.
device-mapper: ioctl: 4.11.0-ioctl (2006-10-12) initialised: dm-devel@redhat.com
md: raid0 personality registered for level 0
md: raid1 personality registered for level 1
md: raid10 personality registered for level 10
JFS: nTxBlock = 1939, nTxLock = 15517
kjournald starting.  Commit interval 5 seconds
EXT3-fs: mounted filesystem with ordered data mode.
via686a 0000:00:07.4: base address not set - upgrade BIOS or use force_addr=0xaddr
ACPI: PCI Interrupt 0000:00:07.5[C] -> Link [LNKC] -> GSI 5 (level, low) -> IRQ 5
PCI: Setting latency timer of device 0000:00:07.5 to 64
Yenta: CardBus bridge found at 0000:00:0a.0 [1509:4460]
Yenta: Enabling burst memory read transactions
Yenta: Using CSCINT to route CSC interrupts to PCI
Yenta: Routing CardBus interrupts to PCI
Yenta TI: socket 0000:00:0a.0, mfunc 0x012c1722, devctl 0x64
parport_pc: VIA 686A/8231 detected
parport_pc: probing current configuration
parport_pc: Current parallel port base: 0x0
parport_pc: VIA parallel port disabled in BIOS
Linux agpgart interface v0.101 (c) Dave Jones
Yenta: ISA IRQ mask 0x08d8, PCI irq 10
Socket status: 30000006
Yenta: CardBus bridge found at 0000:00:0a.1 [1509:4460]
Yenta: Using CSCINT to route CSC interrupts to PCI
Yenta: Routing CardBus interrupts to PCI
Yenta TI: socket 0000:00:0a.1, mfunc 0x012c1722, devctl 0x64
Yenta: ISA IRQ mask 0x08d8, PCI irq 10
Socket status: 30000059
agpgart: Detected VIA Apollo ProMedia/PLE133Ta chipset
agpgart: AGP aperture is 16M @ 0xfd000000
pccard: PCMCIA card inserted into slot 1
ieee80211_crypt: registered algorithm 'NULL'
ieee80211: 802.11 data/management/control stack, git-1.1.13
ieee80211: Copyright (C) 2004-2005 Intel Corporation <jketreno@linux.intel.com>
bcm43xx driver
ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 5
ACPI: PCI Interrupt 0000:00:06.0[A] -> Link [LNKB] -> GSI 5 (level, low) -> IRQ 5
bcm43xx: Chip ID 0x4306, rev 0x3
bcm43xx: Number of cores: 5
bcm43xx: Core 0: ID 0x800, rev 0x4, vendor 0x4243
bcm43xx: Core 1: ID 0x812, rev 0x5, vendor 0x4243
bcm43xx: Core 2: ID 0x80d, rev 0x2, vendor 0x4243
bcm43xx: Core 3: ID 0x807, rev 0x2, vendor 0x4243
bcm43xx: Core 4: ID 0x804, rev 0x9, vendor 0x4243
bcm43xx: PHY connected
bcm43xx: Detected PHY: Analog: 2, Type 2, Revision 2
bcm43xx: Detected Radio: ID: 2205017f (Manuf: 17f Ver: 2050 Rev: 2)
bcm43xx: Radio turned off
bcm43xx: Radio turned off
cs: IO port probe 0x100-0x3af: clean.
cs: IO port probe 0x3e0-0x4ff: clean.
cs: IO port probe 0x820-0x8ff: clean.
cs: IO port probe 0xc00-0xcf7: clean.
cs: IO port probe 0xa00-0xaff: clean.
cs: memory probe 0xa0000000-0xa0ffffff: clean.
pcmcia: registering new device pcmcia1.0
cs: IO port probe 0x100-0x3af: clean.
cs: IO port probe 0x3e0-0x4ff: clean.
cs: IO port probe 0x820-0x8ff: clean.
cs: IO port probe 0xc00-0xcf7: clean.
cs: IO port probe 0xa00-0xaff: clean.
  ASIC rev 1,<6>eth1: Megahertz 574B at io 0x300, irq 3, hw_addr 00:50:DA:D3:1F:8B.
 64K FIFO split 1:1 Rx:Tx, autoselect MII interface.
hda: dma_intr: status=0x51 { DriveReady SeekComplete Error }
hda: dma_intr: error=0x84 { DriveStatusError BadCRC }
ide: failed opcode was: unknown
EXT3 FS on hda3, internal journal
Adding 530136k swap on /dev/hda2.  Priority:-1 extents:1 across:530136k
Real Time Clock Driver v1.12ac
bcm43xx: PHY connected
bcm43xx: Microcode rev 0x127, pl 0xe (2005-04-18  02:36:27)
bcm43xx: Radio turned on
bcm43xx: Radio enabled by hardware
bcm43xx: Chip initialized
bcm43xx: 30-bit DMA initialized
bcm43xx: Keys cleared
bcm43xx: Selected 802.11 core (phytype 2)
SoftMAC: Scanning finished: scanned 13 channels starting with channel 1
SoftMAC: Associate: Scanning for networks first.
SoftMAC: Scanning finished: scanned 13 channels starting with channel 1
SoftMAC: Queueing Authentication Request to 00:11:d8:da:67:d8
SoftMAC: Cannot associate without being authenticated, requested authentication
SoftMAC: Sent Authentication Request to 00:11:d8:da:67:d8.
SoftMAC: Open Authentication completed with 00:11:d8:da:67:d8
SoftMAC: sent association request!
SoftMAC: associating failed (reason: 0x19)!
SoftMAC: Scanning finished: scanned 13 channels starting with channel 1
SoftMAC: Associate: Scanning for networks first.
SoftMAC: Scanning finished: scanned 13 channels starting with channel 1
SoftMAC: Queueing Authentication Request to 00:11:d8:da:67:d8
SoftMAC: Cannot associate without being authenticated, requested authentication
SoftMAC: Sent Authentication Request to 00:11:d8:da:67:d8.
SoftMAC: Open Authentication completed with 00:11:d8:da:67:d8
SoftMAC: sent association request!
SoftMAC: associating failed (reason: 0xc)!
SoftMAC: Associate: Scanning for networks first.
SoftMAC: Scanning finished: scanned 13 channels starting with channel 1
SoftMAC: Queueing Authentication Request to 00:11:d8:da:67:d8
SoftMAC: Cannot associate without being authenticated, requested authentication
SoftMAC: Sent Authentication Request to 00:11:d8:da:67:d8.
SoftMAC: Open Authentication completed with 00:11:d8:da:67:d8
SoftMAC: sent association request!
SoftMAC: associating failed (reason: 0xc)!
SoftMAC: Scanning finished: scanned 13 channels starting with channel 1
bcm43xx: set security called, .level = 0, .enabled = 0, .encrypt = 0
SoftMAC: Associate: Scanning for networks first.
SoftMAC: Scanning finished: scanned 13 channels starting with channel 1
SoftMAC: Queueing Authentication Request to 00:11:d8:da:67:d8
SoftMAC: Cannot associate without being authenticated, requested authentication
SoftMAC: Sent Authentication Request to 00:11:d8:da:67:d8.
SoftMAC: Open Authentication completed with 00:11:d8:da:67:d8
SoftMAC: sent association request!
SoftMAC: associating failed (reason: 0xc)!
bcm43xx: set security called, .level = 0, .enabled = 0, .encrypt = 0
SoftMAC: Associate: Scanning for networks first.
SoftMAC: Scanning finished: scanned 13 channels starting with channel 1
SoftMAC: Queueing Authentication Request to 00:11:d8:da:67:d8
SoftMAC: Cannot associate without being authenticated, requested authentication
SoftMAC: Sent Authentication Request to 00:11:d8:da:67:d8.
SoftMAC: Open Authentication completed with 00:11:d8:da:67:d8
SoftMAC: sent association request!
SoftMAC: associating failed (reason: 0xc)!
SoftMAC: Scanning finished: scanned 13 channels starting with channel 1
bcm43xx: set security called, .level = 0, .enabled = 0, .encrypt = 0
SoftMAC: Associate: Scanning for networks first.
SoftMAC: Scanning finished: scanned 13 channels starting with channel 1
SoftMAC: Queueing Authentication Request to 00:11:d8:da:67:d8
SoftMAC: Cannot associate without being authenticated, requested authentication
SoftMAC: Sent Authentication Request to 00:11:d8:da:67:d8.
SoftMAC: Open Authentication completed with 00:11:d8:da:67:d8
SoftMAC: sent association request!
SoftMAC: associating failed (reason: 0xc)!
bcm43xx: set security called, .level = 0, .enabled = 0, .encrypt = 0
SoftMAC: Associate: Scanning for networks first.
SoftMAC: Scanning finished: scanned 13 channels starting with channel 1
SoftMAC: Queueing Authentication Request to 00:11:d8:da:67:d8
SoftMAC: Cannot associate without being authenticated, requested authentication
SoftMAC: Sent Authentication Request to 00:11:d8:da:67:d8.
SoftMAC: Open Authentication completed with 00:11:d8:da:67:d8
SoftMAC: sent association request!
SoftMAC: associating failed (reason: 0xc)!
SoftMAC: Scanning finished: scanned 13 channels starting with channel 1
SoftMAC: Associate: Scanning for networks first.
SoftMAC: Scanning finished: scanned 13 channels starting with channel 1
SoftMAC: Queueing Authentication Request to 00:11:d8:da:67:d8
SoftMAC: Cannot associate without being authenticated, requested authentication
SoftMAC: Sent Authentication Request to 00:11:d8:da:67:d8.
SoftMAC: Open Authentication completed with 00:11:d8:da:67:d8
SoftMAC: sent association request!
SoftMAC: associating failed (reason: 0xc)!
bcm43xx: set security called, .level = 0, .enabled = 0, .encrypt = 0
SoftMAC: Associate: Scanning for networks first.
SoftMAC: Scanning finished: scanned 13 channels starting with channel 1
SoftMAC: Queueing Authentication Request to 00:11:d8:da:67:d8
SoftMAC: Cannot associate without being authenticated, requested authentication
SoftMAC: Sent Authentication Request to 00:11:d8:da:67:d8.
SoftMAC: Open Authentication completed with 00:11:d8:da:67:d8
SoftMAC: sent association request!
SoftMAC: associating failed (reason: 0xc)!
bcm43xx: set security called, .level = 0, .enabled = 0, .encrypt = 0
SoftMAC: Associate: Scanning for networks first.
SoftMAC: Scanning finished: scanned 13 channels starting with channel 1
SoftMAC: Queueing Authentication Request to 00:11:d8:da:67:d8
SoftMAC: Cannot associate without being authenticated, requested authentication
SoftMAC: Sent Authentication Request to 00:11:d8:da:67:d8.
SoftMAC: Open Authentication completed with 00:11:d8:da:67:d8
SoftMAC: sent association request!
SoftMAC: associating failed (reason: 0xc)!
bcm43xx: set security called, .level = 0, .enabled = 0, .encrypt = 0
SoftMAC: Associate: Scanning for networks first.
SoftMAC: Scanning finished: scanned 13 channels starting with channel 1
SoftMAC: Queueing Authentication Request to 00:11:d8:da:67:d8
SoftMAC: Cannot associate without being authenticated, requested authentication
SoftMAC: Sent Authentication Request to 00:11:d8:da:67:d8.
SoftMAC: Open Authentication completed with 00:11:d8:da:67:d8
SoftMAC: sent association request!
SoftMAC: associating failed (reason: 0xc)!
bcm43xx: Radio turned off
bcm43xx: DMA-32 0x0200 (RX) max used slots: 1/64
bcm43xx: DMA-32 0x02A0 (TX) max used slots: 0/512
bcm43xx: DMA-32 0x0280 (TX) max used slots: 0/512
bcm43xx: DMA-32 0x0260 (TX) max used slots: 0/512
bcm43xx: DMA-32 0x0240 (TX) max used slots: 0/512
bcm43xx: DMA-32 0x0220 (TX) max used slots: 2/512
bcm43xx: DMA-32 0x0200 (TX) max used slots: 0/512
bcm43xx: set security called, .level = 0, .enabled = 0, .encrypt = 0
SoftMAC: Associate: Scanning for networks first.
SoftMAC: Associate: failed to initiate scan. Is device up?
bcm43xx: PHY connected
bcm43xx: Microcode rev 0x127, pl 0xe (2005-04-18  02:36:27)
bcm43xx: Radio turned on
bcm43xx: Radio enabled by hardware
bcm43xx: Chip initialized
bcm43xx: 30-bit DMA initialized
bcm43xx: Keys cleared
bcm43xx: Selected 802.11 core (phytype 2)
SoftMAC: Queueing Authentication Request to 00:11:d8:da:67:d8
SoftMAC: Cannot associate without being authenticated, requested authentication
SoftMAC: Sent Authentication Request to 00:11:d8:da:67:d8.
SoftMAC: Open Authentication completed with 00:11:d8:da:67:d8
SoftMAC: sent association request!
SoftMAC: associating failed (reason: 0xc)!
bcm43xx: set security called, .level = 0, .enabled = 0, .encrypt = 0
SoftMAC: Associate: Scanning for networks first.
SoftMAC: Scanning finished: scanned 13 channels starting with channel 1
SoftMAC: Queueing Authentication Request to 00:11:d8:da:67:d8
SoftMAC: Cannot associate without being authenticated, requested authentication
SoftMAC: sent association request!
SoftMAC: Sent Authentication Request to 00:11:d8:da:67:d8.
SoftMAC: associating failed (reason: 0xc)!
SoftMAC: Open Authentication completed with 00:11:d8:da:67:d8
SoftMAC: Associate: Scanning for networks first.
SoftMAC: Scanning finished: scanned 13 channels starting with channel 1
SoftMAC: Queueing Authentication Request to 00:11:d8:da:67:d8
SoftMAC: Cannot associate without being authenticated, requested authentication
SoftMAC: Sent Authentication Request to 00:11:d8:da:67:d8.
SoftMAC: Open Authentication completed with 00:11:d8:da:67:d8
SoftMAC: sent association request!
SoftMAC: associating failed (reason: 0xc)!
bcm43xx: Radio turned off
bcm43xx: DMA-32 0x0200 (RX) max used slots: 1/64
bcm43xx: DMA-32 0x02A0 (TX) max used slots: 0/512
bcm43xx: DMA-32 0x0280 (TX) max used slots: 0/512
bcm43xx: DMA-32 0x0260 (TX) max used slots: 0/512
bcm43xx: DMA-32 0x0240 (TX) max used slots: 0/512
bcm43xx: DMA-32 0x0220 (TX) max used slots: 2/512
bcm43xx: DMA-32 0x0200 (TX) max used slots: 0/512
bcm43xx driver
ACPI: PCI Interrupt 0000:00:06.0[A] -> Link [LNKB] -> GSI 5 (level, low) -> IRQ 5
bcm43xx: Chip ID 0x4306, rev 0x3
bcm43xx: Number of cores: 5
bcm43xx: Core 0: ID 0x800, rev 0x4, vendor 0x4243
bcm43xx: Core 1: ID 0x812, rev 0x5, vendor 0x4243
bcm43xx: Core 2: ID 0x80d, rev 0x2, vendor 0x4243
bcm43xx: Core 3: ID 0x807, rev 0x2, vendor 0x4243
bcm43xx: Core 4: ID 0x804, rev 0x9, vendor 0x4243
bcm43xx: PHY connected
bcm43xx: Detected PHY: Analog: 2, Type 2, Revision 2
bcm43xx: Detected Radio: ID: 2205017f (Manuf: 17f Ver: 2050 Rev: 2)
bcm43xx: Radio turned off
bcm43xx: Radio turned off
bcm43xx driver
ACPI: PCI Interrupt 0000:00:06.0[A] -> Link [LNKB] -> GSI 5 (level, low) -> IRQ 5
bcm43xx: Chip ID 0x4306, rev 0x3
bcm43xx: Number of cores: 5
bcm43xx: Core 0: ID 0x800, rev 0x4, vendor 0x4243
bcm43xx: Core 1: ID 0x812, rev 0x5, vendor 0x4243
bcm43xx: Core 2: ID 0x80d, rev 0x2, vendor 0x4243
bcm43xx: Core 3: ID 0x807, rev 0x2, vendor 0x4243
bcm43xx: Core 4: ID 0x804, rev 0x9, vendor 0x4243
bcm43xx: PHY connected
bcm43xx: Detected PHY: Analog: 2, Type 2, Revision 2
bcm43xx: Detected Radio: ID: 2205017f (Manuf: 17f Ver: 2050 Rev: 2)
bcm43xx: Radio turned off
bcm43xx: Radio turned off
bcm43xx: PHY connected
bcm43xx: Microcode rev 0x127, pl 0xe (2005-04-18  02:36:27)
bcm43xx: Radio turned on
bcm43xx: Radio enabled by hardware
bcm43xx: Chip initialized
bcm43xx: 30-bit DMA initialized
bcm43xx: Keys cleared
bcm43xx: Selected 802.11 core (phytype 2)
SoftMAC: Scanning finished: scanned 13 channels starting with channel 1
SoftMAC: Associate: Scanning for networks first.
SoftMAC: Scanning finished: scanned 13 channels starting with channel 1
SoftMAC: Queueing Authentication Request to 00:11:d8:da:67:d8
SoftMAC: Cannot associate without being authenticated, requested authentication
SoftMAC: Sent Authentication Request to 00:11:d8:da:67:d8.
SoftMAC: Open Authentication completed with 00:11:d8:da:67:d8
SoftMAC: sent association request!
SoftMAC: associated!
eth1: found link beat
eth1: autonegotiation complete: 100baseT-FD selected
willie@localhost ~ $