Problem:  Asterisk on a Mini-itx board working fine.  Plugged in USB drive, then X100p and soundcard died.  2 other x100p's died.   Put * on a new box, ordered 3 new x100p cards. On the new box I get: ZT_CHANCONFIG failed on channel 1 for 2 new cards.   On the old box I get: FXO PCI Master abort, with the remaining new card.  Same error as before.

I think the mini-itx is frying the cards.

zaptel.conf:

loadzone = us
defaultzone=us
fxsks=1

zapata.conf:

 cat zapata.conf 
[channels]
signalling=fxs_ks
context=incoming
echocancel=yes
echocancelwhenbridged=yes
relaxdtmf=yes
rxgain=1.5
txgain=1.5
immediate=no
busydetect=no
callprogress=no
musiconhold=default
usecallerid=yes
;callerid=asreceived
cidsignalling=bell 
;cidstart=ring
callwaitingcallerid=yes
callwaiting=yes
threewaycalling=yes
hidecallerid=yes




I run:
modprobe zaptel
modprobe wcfxo
ztcfg -vv

 cat /proc/interrupts*
           CPU0       
  0:    3579066          XT-PIC  timer
  1:       9097          XT-PIC  i8042
  2:          0          XT-PIC  cascade
  7:          0          XT-PIC  parport0
  9:       9533          XT-PIC  acpi, Intel ICH 82801AA, eth0
 11:          0          XT-PIC  uhci_hcd
 12:      62963          XT-PIC  i8042
 14:       5824          XT-PIC  ide0
 15:         11          XT-PIC  ide1
NMI:          0 
LOC:    3579048 
ERR:          0
MIS:          0