[mythtv@mythbackend2 scripts]$ dmesg Linux version 2.6.16-1.2111_FC4smp (bhcompile@hs20-bc1-5.build.redhat.com) (gcc version 4.0.2 20051125 (Red Hat 4.0.2-8)) #1 SMP Sat May 20 20:16:24 EDT 2006 BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 000000001fff0000 (usable) BIOS-e820: 000000001fff0000 - 0000000020000000 (reserved) 0MB HIGHMEM available. 511MB LOWMEM available. found SMP MP-table at 000f7a00 Using x86 segment limits to approximate NX protection On node 0 totalpages: 131056 DMA zone: 4096 pages, LIFO batch:0 DMA32 zone: 0 pages, LIFO batch:0 Normal zone: 126960 pages, LIFO batch:31 HighMem zone: 0 pages, LIFO batch:0 DMI 2.3 present. Using APIC driver default ACPI: RSDP (v000 COMPAQ ) @ 0x000e0010 ACPI: RSDT (v001 COMPAQ CPQB154 0x20000808 0x00000000) @ 0x000e0080 ACPI: FADT (v001 COMPAQ CARMEL 0x00000001 0x00000000) @ 0x000e00ec ACPI: MADT (v001 COMPAQ CARMEL 0x00000001 0x00000000) @ 0x000e0160 ACPI: SSDT (v001 COMPAQ ZURICH 0x00000001 MSFT 0x0100000d) @ 0x000e1e00 ACPI: SSDT (v001 COMPAQ PNP_PRSS 0x00000001 MSFT 0x0100000d) @ 0x000e204c ACPI: SSDT (v001 COMPAQ FHUB 0x00000001 MSFT 0x0100000d) @ 0x000e3478 ACPI: SSDT (v001 COMPAQ THERMAL 0x00000001 MSFT 0x0100000d) @ 0x000e26f1 ACPI: SSDT (v001 COMPAQ S1 0x00000001 MSFT 0x0100000d) @ 0x000e33b0 ACPI: DSDT (v001 COMPAQ DSDT 0x00000001 MSFT 0x0100000d) @ 0x00000000 ACPI: BIOS age (2000) fails cutoff (2001), acpi=force is required to enable ACPI ACPI: Disabling ACPI support Intel MultiProcessor Specification v1.4 Virtual Wire compatibility mode. OEM ID: COMPAQ Product ID: Workstation APIC at: 0xFEE00000 Processor #1 6:8 APIC version 16 Processor #0 6:8 APIC version 16 I/O APIC #8 Version 17 at 0xFEC00000. Enabling APIC mode: Flat. Using 1 I/O APICs Processors: 2 Allocating PCI resources starting at 30000000 (gap: 20000000:e0000000) Built 1 zonelists Kernel command line: ro root=LABEL=/ rhgb quiet mapped APIC to ffffd000 (fee00000) mapped IOAPIC to ffffc000 (fec00000) Enabling fast FPU save and restore... done. Enabling unmasked SIMD FPU exception support... done. Initializing CPU#0 CPU 0 irqstacks, hard=c0438000 soft=c0458000 PID hash table entries: 2048 (order: 11, 32768 bytes) Detected 864.049 MHz processor. Using tsc for high-res timesource Console: colour VGA+ 80x25 Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) Memory: 511508k/524224k available (2220k kernel code, 12132k reserved, 816k data, 232k init, 0k highmem) Checking if this processor honours the WP bit even in supervisor mode... Ok. Calibrating delay using timer specific routine.. 1730.44 BogoMIPS (lpj=3460888) Security Framework v1.0.0 initialized SELinux: Initializing. SELinux: Starting in permissive mode selinux_register_security: Registering secondary module capability Capability LSM initialized as secondary Mount-cache hash table entries: 512 CPU: After generic identify, caps: 0383fbff 00000000 00000000 00000000 00000000 00000000 00000000 CPU: After vendor identify, caps: 0383fbff 00000000 00000000 00000000 00000000 00000000 00000000 CPU: L1 I cache: 16K, L1 D cache: 16K CPU: L2 cache: 256K CPU: After all inits, caps: 0383f3ff 00000000 00000000 00000040 00000000 00000000 00000000 Intel machine check architecture supported. Intel machine check reporting enabled on CPU#0. Checking 'hlt' instruction... OK. CPU0: Intel Pentium III (Coppermine) stepping 03 Booting processor 1/0 eip 3000 CPU 1 irqstacks, hard=c0439000 soft=c0459000 Initializing CPU#1 Calibrating delay using timer specific routine.. 1728.00 BogoMIPS (lpj=3456015) CPU: After generic identify, caps: 0383fbff 00000000 00000000 00000000 00000000 00000000 00000000 CPU: After vendor identify, caps: 0383fbff 00000000 00000000 00000000 00000000 00000000 00000000 CPU: L1 I cache: 16K, L1 D cache: 16K CPU: L2 cache: 256K CPU: After all inits, caps: 0383f3ff 00000000 00000000 00000040 00000000 00000000 00000000 Intel machine check architecture supported. Intel machine check reporting enabled on CPU#1. CPU1: Intel Pentium III (Coppermine) stepping 03 Total of 2 processors activated (3458.45 BogoMIPS). ENABLING IO-APIC IRQs ..TIMER: vector=0x31 apic1=-1 pin1=-1 apic2=-1 pin2=-1 ...trying to set up timer (IRQ0) through the 8259A ... failed. ...trying to set up timer as Virtual Wire IRQ... works. checking TSC synchronization across 2 CPUs: passed. Brought up 2 CPUs migration_cost=643 checking if image is initramfs... it is Freeing initrd memory: 1214k freed NET: Registered protocol family 16 PCI: PCI BIOS revision 2.10 entry at 0xedb08, last bus=2 PCI: Using configuration type 1 ACPI: Subsystem revision 20060127 ACPI: Interpreter disabled. Linux Plug and Play Support v0.97 (c) Adam Belay pnp: PnP ACPI: disabled usbcore: registered new driver usbfs usbcore: registered new driver hub PCI: Probing PCI hardware PCI: Probing PCI hardware (bus 00) PCI quirk: region f800-f87f claimed by ICH4 ACPI/GPIO/TCO PCI quirk: region fa00-fa3f claimed by ICH4 GPIO Boot video device is 0000:01:00.0 PCI: Transparent bridge - 0000:00:1e.0 PCI: Discovered primary peer bus ff [IRQ] PCI: Using IRQ router PIIX/ICH [8086/2410] at 0000:00:1f.0 PCI->APIC IRQ transform: 0000:00:1f.2[D] -> IRQ 19 PCI->APIC IRQ transform: 0000:00:1f.3[B] -> IRQ 17 PCI->APIC IRQ transform: 0000:00:1f.5[B] -> IRQ 17 PCI->APIC IRQ transform: 0000:01:00.0[A] -> IRQ 18 PCI->APIC IRQ transform: 0000:02:02.0[A] -> IRQ 18 PCI->APIC IRQ transform: 0000:02:07.0[A] -> IRQ 19 PCI->APIC IRQ transform: 0000:02:08.0[A] -> IRQ 16 PCI->APIC IRQ transform: 0000:02:0a.0[A] -> IRQ 18 PCI: Failed to allocate mem resource #6:20000@f8000000 for 0000:01:00.0 PCI: Bridge: 0000:00:01.0 IO window: disabled. MEM window: fd000000-fdffffff PREFETCH window: f0000000-f7ffffff PCI: Bridge: 0000:00:1e.0 IO window: 5000-5fff MEM window: efb00000-efffffff PREFETCH window: 30000000-301fffff PCI: Setting latency timer of device 0000:00:1e.0 to 64 apm: BIOS not found. audit: initializing netlink socket (disabled) audit(1180315142.844:1): initialized Total HugeTLB memory allocated, 0 VFS: Disk quotas dquot_6.5.1 Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) SELinux: Registering netfilter hooks Initializing Cryptographic API ksign: Installing public key data Loading keyring - Added public key B9CADD0C9D36BD8B - User ID: Red Hat, Inc. (Kernel Module GPG key) io scheduler noop registered io scheduler anticipatory registered io scheduler deadline registered io scheduler cfq registered (default) pci_hotplug: PCI Hot Plug PCI Core version: 0.5 isapnp: Scanning for PnP cards... isapnp: No Plug & Play device found Real Time Clock Driver v1.12ac Linux agpgart interface v0.101 (c) Dave Jones agpgart: Detected an Intel i840 Chipset. agpgart: AGP aperture is 128M @ 0xe0000000 PNP: No PS/2 controller found. Probing ports directly. serio: i8042 AUX port at 0x60,0x64 irq 12 serio: i8042 KBD port at 0x60,0x64 irq 1 Serial: 8250/16550 driver $Revision: 1.90 $ 2 ports, IRQ sharing enabled serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A RAMDISK driver initialized: 16 RAM disks of 16384K size 1024 blocksize Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx ICH: IDE controller at PCI slot 0000:00:1f.1 ICH: chipset revision 2 ICH: not 100% native mode: will probe irqs later ide0: BM-DMA at 0x6460-0x6467, BIOS settings: hda:DMA, hdb:pio ide1: BM-DMA at 0x6468-0x646f, BIOS settings: hdc:pio, hdd:pio Probing IDE interface ide0... hda: DVDRW IDE 16X, ATAPI CD/DVD-ROM drive ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 Probing IDE interface ide1... SiI680: IDE controller at PCI slot 0000:02:08.0 SiI680: chipset revision 2 SiI680: BASE CLOCK == 133 SiI680: 100% native mode on irq 16 ide2: MMIO-DMA , BIOS settings: hde:pio, hdf:pio ide3: MMIO-DMA , BIOS settings: hdg:pio, hdh:pio Probing IDE interface ide2... hde: Maxtor 6L200P0, ATA DISK drive hdf: Maxtor 6L200P0, ATA DISK drive ide2 at 0xe0814080-0xe0814087,0xe081408a on irq 16 Probing IDE interface ide3... hdg: Maxtor 6Y200P0, ATA DISK drive hdh: Maxtor 6L200P0, ATA DISK drive ide3 at 0xe08140c0-0xe08140c7,0xe08140ca on irq 16 Probing IDE interface ide1... hde: max request size: 64KiB hde: 398297088 sectors (203928 MB) w/8192KiB Cache, CHS=24792/255/63, UDMA(133) hde: cache flushes supported hde: hde1 hdf: max request size: 64KiB hdf: 398297088 sectors (203928 MB) w/8192KiB Cache, CHS=24792/255/63, UDMA(133) hdf: cache flushes supported hdf: hdf1 hdg: max request size: 64KiB hdg: 398297088 sectors (203928 MB) w/7936KiB Cache, CHS=24792/255/63, UDMA(133) hdg: cache flushes supported hdg: hdg1 hdh: max request size: 64KiB hdh: 398297088 sectors (203928 MB) w/8192KiB Cache, CHS=24792/255/63, UDMA(133) hdh: cache flushes supported hdh: hdh1 hda: ATAPI 48X DVD-ROM DVD-R CD-R/RW drive, 2048kB Cache, UDMA(33) Uniform CD-ROM driver Revision: 3.20 ide-floppy driver 0.99.newide usbcore: registered new driver libusual usbcore: registered new driver hiddev usbcore: registered new driver usbhid drivers/usb/input/hid-core.c: v2.6:USB HID core driver mice: PS/2 mouse device common for all mice md: md driver 0.90.3 MAX_MD_DEVS=256, MD_SB_DISKS=27 md: bitmap version 4.39 NET: Registered protocol family 2 input: AT Translated Set 2 keyboard as /class/input/input0 IP route cache hash table entries: 8192 (order: 3, 32768 bytes) TCP established hash table entries: 32768 (order: 7, 655360 bytes) TCP bind hash table entries: 32768 (order: 7, 655360 bytes) TCP: Hash tables configured (established 32768 bind 32768) TCP reno registered TCP bic registered Initializing IPsec netlink socket NET: Registered protocol family 1 NET: Registered protocol family 17 Using IPI No-Shortcut mode Freeing unused kernel memory: 232k freed Write protecting the kernel read-only data: 352k SCSI subsystem initialized input: ImPS/2 Generic Wheel Mouse as /class/input/input1 scsi0 : Adaptec AIC7XXX EISA/VLB/PCI SCSI HBA DRIVER, Rev 7.0 aic7892: Ultra160 Wide Channel A, SCSI Id=7, 32/253 SCBs Vendor: COMPAQPC Model: DDYS-T18350N Rev: B93E Type: Direct-Access ANSI SCSI revision: 02 scsi0:A:0:0: Tagged Queuing enabled. Depth 4 target0:0:0: Beginning Domain Validation target0:0:0: wide asynchronous target0:0:0: FAST-80 WIDE SCSI 160.0 MB/s DT (12.5 ns, offset 63) target0:0:0: Ending Domain Validation SCSI device sda: 35565080 512-byte hdwr sectors (18209 MB) sda: Write Protect is off sda: Mode Sense: cf 00 10 08 SCSI device sda: drive cache: write back w/ FUA SCSI device sda: 35565080 512-byte hdwr sectors (18209 MB) sda: Write Protect is off sda: Mode Sense: cf 00 10 08 SCSI device sda: drive cache: write back w/ FUA sda: sda1 sda2 sda3 sd 0:0:0:0: Attached scsi disk sda EXT3-fs: INFO: recovery required on readonly filesystem. EXT3-fs: write access will be enabled during recovery. kjournald starting. Commit interval 5 seconds EXT3-fs: sda3: orphan cleanup on readonly fs ext3_orphan_cleanup: deleting unreferenced inode 916654 ext3_orphan_cleanup: deleting unreferenced inode 916653 ext3_orphan_cleanup: deleting unreferenced inode 916646 ext3_orphan_cleanup: deleting unreferenced inode 916610 EXT3-fs: sda3: 4 orphan inodes deleted EXT3-fs: recovery complete. EXT3-fs: mounted filesystem with ordered data mode. SELinux: Disabled at runtime. SELinux: Unregistering netfilter hooks FDC 0 is a post-1991 82077 r8169 Gigabit Ethernet driver 6.001.00-NAPI loaded eth0: RTL8169S/8110S at 0xe0866000, 00:0e:2e:69:4b:00, IRQ 18 e100: Intel(R) PRO/100 Network Driver, 3.5.10-k2-NAPI e100: Copyright(c) 1999-2005 Intel Corporation PCI: Enabling device 0000:02:02.0 (0100 -> 0103) e100: eth1: e100_probe: addr 0xefb00000, irq 18, MAC addr 00:02:A5:1B:46:1C PCI: Setting latency timer of device 0000:00:1f.5 to 64 intel8x0_measure_ac97_clock: measured 58832 usecs intel8x0: clocking to 48000 hw_random hardware driver 1.0.0 loaded eepro100.c:v1.09j-t 9/29/99 Donald Becker http://www.scyld.com/network/eepro100.html eepro100.c: $Revision: 1.36 $ 2000/11/17 Modified by Andrey V. Savochkin and others USB Universal Host Controller Interface driver v2.3 PCI: Setting latency timer of device 0000:00:1f.2 to 64 uhci_hcd 0000:00:1f.2: UHCI Host Controller uhci_hcd 0000:00:1f.2: new USB bus registered, assigned bus number 1 uhci_hcd 0000:00:1f.2: irq 19, io base 0x00006440 usb usb1: configuration #1 chosen from 1 choice hub 1-0:1.0: USB hub found hub 1-0:1.0: 2 ports detected r8169: eth1: link up NET: Registered protocol family 10 lo: Disabled Privacy Extensions IPv6 over IPv4 tunneling driver md: Autodetecting RAID arrays. md: autorun ... md: ... autorun DONE. device-mapper: 4.5.0-ioctl (2005-10-04) initialised: dm-devel@redhat.com eth1: no IPv6 routers present EXT3 FS on sda3, internal journal kjournald starting. Commit interval 5 seconds EXT3 FS on sda1, internal journal EXT3-fs: mounted filesystem with ordered data mode. JFS: nTxBlock = 4009, nTxLock = 32072 Adding 522104k swap on /dev/sda2. Priority:-1 extents:1 across:522104k Bluetooth: Core ver 2.8 NET: Registered protocol family 31 Bluetooth: HCI device and connection manager initialized Bluetooth: HCI socket layer initialized Bluetooth: L2CAP ver 2.8 Bluetooth: L2CAP socket layer initialized Bluetooth: RFCOMM socket layer initialized Bluetooth: RFCOMM TTY layer initialized Bluetooth: RFCOMM ver 1.7 NET: Registered protocol family 15 parport0: PC-style at 0x378 [PCSPP,TRISTATE,EPP] lp0: using parport0 (polling). lp0: console ready [mythtv@mythbackend2 scripts]$