-[00]-+-00.0  ATI Technologies Inc Radeon 9100 IGP Host Bridge
      +-01.0-[01]----05.0  ATI Technologies Inc RS300M AGP [Radeon Mobility 9100IGP]
      +-13.0  ATI Technologies Inc OHCI USB Controller #1
      +-13.1  ATI Technologies Inc OHCI USB Controller #2
      +-14.0  ATI Technologies Inc ATI SMBus
      +-14.1  ATI Technologies Inc ATI Dual Channel Bus Master PCI IDE Controller
      +-14.3  ATI Technologies Inc: Unknown device 434c
      +-14.4-[02-04]--+-[03]---00.0  3Com Corporation 3CRPAG175 Wireless PC Card
      |               \-[02]-+-00.0  Texas Instruments TSB43AB21 IEEE-1394a-2000 Controller (PHY/Link)
      |                      +-03.0  Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+
      |                      +-04.0  Texas Instruments PCI1620 PC Card Controller
      |                      +-04.1  Texas Instruments PCI1620 PC Card Controller
      |                      +-04.2  Texas Instruments PCI1620 Firmware Loading Function
      |                      +-07.0  NEC Corporation USB
      |                      +-07.1  NEC Corporation USB
      |                      \-07.2  NEC Corporation USB 2.0
      +-14.5  ATI Technologies Inc IXP150 AC'97 Audio Controller
      \-14.6  ATI Technologies Inc IXP AC'97 Modem





00:00.0 Host bridge: ATI Technologies Inc Radeon 9100 IGP Host Bridge (rev 02)
        Subsystem: ATI Technologies Inc: Unknown device 1234
        Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
        Status: Cap+ 66Mhz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ >SERR- <PERR-
        Latency: 64
        Region 0: Memory at f6000000 (32-bit, prefetchable) [size=32M]
        Region 1: Memory at f4000000 (32-bit, non-prefetchable) [size=4K]
        Capabilities: [a0] AGP version 3.0
                Status: RQ=32 Iso- ArqSz=0 Cal=0 SBA+ ITACoh- GART64- HTrans- 64bit- FW+ AGP3+ Rate=x4,x8
                Command: RQ=1 ArqSz=0 Cal=0 SBA+ AGP- GART64- 64bit- FW- Rate=<none>

00:01.0 PCI bridge: ATI Technologies Inc Radeon 9100 IGP AGP Bridge (prog-if 00 [Normal decode])
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
        Status: Cap- 66Mhz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
        Latency: 99
        Bus: primary=00, secondary=01, subordinate=01, sec-latency=68
        I/O behind bridge: 00009000-00009fff
        Memory behind bridge: f4100000-f41fffff
        Prefetchable memory behind bridge: f8000000-fbffffff
        BridgeCtl: Parity- SERR- NoISA+ VGA+ MAbort- >Reset- FastB2B-

00:13.0 USB Controller: ATI Technologies Inc OHCI USB Controller #1 (rev 01) (prog-if 10 [OHCI])
        Subsystem: ATI Technologies Inc: Unknown device 434c
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B-
        Status: Cap- 66Mhz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
        Latency: 64, cache line size 08
        Interrupt: pin A routed to IRQ 11
        Region 0: Memory at f4001000 (32-bit, non-prefetchable) [size=4K]

00:13.1 USB Controller: ATI Technologies Inc OHCI USB Controller #2 (rev 01) (prog-if 10 [OHCI])
        Subsystem: ATI Technologies Inc: Unknown device 434c
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B-
        Status: Cap- 66Mhz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
        Latency: 64, cache line size 08
        Interrupt: pin A routed to IRQ 11
        Region 0: Memory at f4002000 (32-bit, non-prefetchable) [size=4K]

00:14.0 SMBus: ATI Technologies Inc ATI SMBus (rev 16)
        Subsystem: Hewlett-Packard Company: Unknown device 006b
        Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
        Status: Cap- 66Mhz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
        Region 0: I/O ports at 8040 [size=16]
        Region 1: Memory at 24000000 (32-bit, non-prefetchable) [size=1K]

00:14.1 IDE interface: ATI Technologies Inc ATI Dual Channel Bus Master PCI IDE Controller (prog-if 8a [Master SecP PriP])
        Subsystem: ATI Technologies Inc ATI Dual Channel Bus Master PCI IDE Controller
        Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
        Status: Cap- 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort+ <TAbort- <MAbort- >SERR- <PERR-
        Latency: 64
        Interrupt: pin A routed to IRQ 10
        Region 0: I/O ports at <ignored>
        Region 1: I/O ports at <ignored>
        Region 2: I/O ports at <ignored>
        Region 3: I/O ports at <ignored>
        Region 4: I/O ports at 8060 [size=16]

00:14.3 ISA bridge: ATI Technologies Inc: Unknown device 434c
        Subsystem: ATI Technologies Inc: Unknown device 434c
        Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
        Status: Cap- 66Mhz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
        Latency: 0

00:14.4 PCI bridge: ATI Technologies Inc: Unknown device 4342 (prog-if 01 [Subtractive decode])
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
        Status: Cap- 66Mhz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
        Latency: 64
        Bus: primary=00, secondary=02, subordinate=04, sec-latency=69
        I/O behind bridge: 0000a000-0000afff
        Memory behind bridge: f4200000-f42fffff
        Prefetchable memory behind bridge: 20000000-23ffffff
        BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-

00:14.5 Multimedia audio controller: ATI Technologies Inc IXP150 AC'97 Audio Controller
        Subsystem: Hewlett-Packard Company: Unknown device 006b
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B-
        Status: Cap- 66Mhz+ UDF- FastB2B- ParErr- DEVSEL=slow >TAbort- <TAbort- <MAbort- >SERR- <PERR-
        Latency: 64 (500ns min), cache line size 08
        Interrupt: pin B routed to IRQ 10
        Region 0: Memory at f4003000 (32-bit, non-prefetchable) [size=256]

00:14.6 Modem: ATI Technologies Inc IXP AC'97 Modem (rev 01) (prog-if 00 [Generic])
        Subsystem: Hewlett-Packard Company: Unknown device 006b
        Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B-
        Status: Cap- 66Mhz+ UDF- FastB2B- ParErr- DEVSEL=slow >TAbort- <TAbort- <MAbort- >SERR- <PERR-
        Interrupt: pin B routed to IRQ 10
        Region 0: Memory at f4003400 (32-bit, non-prefetchable) [size=256]

01:05.0 VGA compatible controller: ATI Technologies Inc RS300M AGP [Radeon Mobility 9100IGP] (prog-if 00 [VGA])        Subsystem: Hewlett-Packard Company: Unknown device 006b
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B+
        Status: Cap+ 66Mhz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
        Latency: 66 (2000ns min), cache line size 08
        Interrupt: pin A routed to IRQ 10
        Region 0: Memory at f8000000 (32-bit, prefetchable) [size=64M]
        Region 1: I/O ports at 9000 [size=256]
        Region 2: Memory at f4100000 (32-bit, non-prefetchable) [size=64K]
        Expansion ROM at f4120000 [disabled] [size=128K]
        Capabilities: [58] AGP version 3.0
                Status: RQ=256 Iso- ArqSz=0 Cal=7 SBA+ ITACoh- GART64- HTrans- 64bit+ FW+ AGP3+ Rate=x4,x8
                Command: RQ=1 ArqSz=0 Cal=0 SBA+ AGP- GART64- 64bit- FW- Rate=<none>
        Capabilities: [50] Power Management version 2
                Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
                Status: D0 PME-Enable- DSel=0 DScale=0 PME-

02:00.0 FireWire (IEEE 1394): Texas Instruments TSB43AB21 IEEE-1394a-2000 Controller (PHY/Link) (prog-if 10 [OHCI])
        Subsystem: Hewlett-Packard Company: Unknown device 006b
        Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B-
        Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
        Latency: 64 (500ns min, 1000ns max), cache line size 08
        Interrupt: pin A routed to IRQ 10
        Region 0: Memory at f4206000 (32-bit, non-prefetchable) [size=2K]
        Region 1: Memory at f4200000 (32-bit, non-prefetchable) [size=16K]
        Capabilities: [44] Power Management version 2
                Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold-)
                Status: D0 PME-Enable- DSel=0 DScale=0 PME-

02:03.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+ (rev 10)
        Subsystem: Hewlett-Packard Company: Unknown device 006b
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
        Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR+
        Latency: 128 (8000ns min, 16000ns max)
        Interrupt: pin A routed to IRQ 11
        Region 0: I/O ports at a000 [size=256]
        Region 1: Memory at f4206800 (32-bit, non-prefetchable) [size=256]
        Capabilities: [50] Power Management version 2
                Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=375mA PME(D0-,D1+,D2+,D3hot+,D3cold+)
                Status: D0 PME-Enable- DSel=0 DScale=0 PME-

02:04.0 CardBus bridge: Texas Instruments PCI1620 PC Card Controller (rev 01)
        Subsystem: Hewlett-Packard Company: Unknown device 006b
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
        Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
        Latency: 168, cache line size 20
        Interrupt: pin A routed to IRQ 10
        Region 0: Memory at f4207000 (32-bit, non-prefetchable) [size=4K]
        Bus: primary=02, secondary=03, subordinate=03, sec-latency=176
        Memory window 0: 20000000-21fff000 (prefetchable)
        Memory window 1: 26000000-27fff000
        I/O window 0: 0000a800-0000a8ff
        I/O window 1: 0000ac00-0000acff
        BridgeCtl: Parity- SERR- ISA- VGA- MAbort- >Reset- 16bInt- PostWrite+
        16-bit legacy interface ports at 0001

02:04.1 CardBus bridge: Texas Instruments PCI1620 PC Card Controller (rev 01)
        Subsystem: Hewlett-Packard Company: Unknown device 006b
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
        Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
        Latency: 168, cache line size 20
        Interrupt: pin B routed to IRQ 10
        Region 0: Memory at f4208000 (32-bit, non-prefetchable) [size=4K]
        Bus: primary=02, secondary=04, subordinate=07, sec-latency=176
        Memory window 0: 22000000-23fff000 (prefetchable)
        Memory window 1: 28000000-29fff000
        I/O window 0: 00001400-000014ff
        I/O window 1: 00001800-000018ff
        BridgeCtl: Parity- SERR- ISA- VGA- MAbort- >Reset+ 16bInt+ PostWrite+
        16-bit legacy interface ports at 0001

02:04.2 System peripheral: Texas Instruments PCI1620 Firmware Loading Function (rev 01)
        Subsystem: Hewlett-Packard Company: Unknown device 006b
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
        Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
        Latency: 64 (1750ns min, 1000ns max), cache line size 08
        Region 0: I/O ports at a400 [size=64]
        Capabilities: [44] Power Management version 2
                Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
                Status: D0 PME-Enable- DSel=0 DScale=0 PME-

02:07.0 USB Controller: NEC Corporation USB (rev 43) (prog-if 10 [OHCI])
        Subsystem: NEC Corporation USB
        Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B-
        Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
        Latency: 64 (250ns min, 10500ns max), cache line size 08
        Interrupt: pin A routed to IRQ 10
        Region 0: Memory at f4204000 (32-bit, non-prefetchable) [size=4K]
        Capabilities: [40] Power Management version 2
                Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold+)
                Status: D0 PME-Enable- DSel=0 DScale=0 PME-

02:07.1 USB Controller: NEC Corporation USB (rev 43) (prog-if 10 [OHCI])
        Subsystem: NEC Corporation USB
        Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B-
        Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
        Latency: 64 (250ns min, 10500ns max), cache line size 08
        Interrupt: pin B routed to IRQ 5
        Region 0: Memory at f4205000 (32-bit, non-prefetchable) [size=4K]
        Capabilities: [40] Power Management version 2
                Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold+)
                Status: D0 PME-Enable- DSel=0 DScale=0 PME-

02:07.2 USB Controller: NEC Corporation USB 2.0 (rev 04) (prog-if 20 [EHCI])
        Subsystem: NEC Corporation USB 2.0
        Control: I/O- Mem+ BusMaster- SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B-
        Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
        Interrupt: pin C routed to IRQ 11
        Region 0: Memory at f4206c00 (32-bit, non-prefetchable) [size=256]
        Capabilities: [40] Power Management version 2
                Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold+)
                Status: D0 PME-Enable- DSel=0 DScale=0 PME-

03:00.0 Ethernet controller: 3Com Corporation 3CRPAG175 Wireless PC Card (rev 01)
        Subsystem: 3Com Corporation: Unknown device 1026
        Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
        Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
        Interrupt: pin A routed to IRQ 10
        Region 0: Memory at 26000000 (32-bit, non-prefetchable) [disabled] [size=64K]
        Capabilities: [44] Power Management version 2
                Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
                Status: D0 PME-Enable- DSel=0 DScale=2 PME-