smartctl version 5.37 [i686-mingw32-xp-sp2] Copyright (C) 2002-6 Bruce Allen Home page is http://smartmontools.sourceforge.net/ === START OF INFORMATION SECTION === Model Family: Seagate Barracuda 7200.7 and 7200.7 Plus family Device Model: ST3160023A Serial Number: 5JS6GQ85 Firmware Version: 8.01 User Capacity: 160,041,885,696 bytes Device is: In smartctl database [for details use: -P show] ATA Version is: 6 ATA Standard is: ATA/ATAPI-6 T13 1410D revision 2 Local Time is: Mon May 28 23:05:09 2007 EST SMART support is: Available - device has SMART capability. Enabled status cached by OS, trying SMART RETURN STATUS cmd. SMART support is: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x82) Offline data collection activity was completed without error. Auto Offline Data Collection: Enabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: ( 430) seconds. Offline data collection capabilities: (0x5b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. No Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 1) minutes. Extended self-test routine recommended polling time: ( 111) minutes. SMART Attributes Data Structure revision number: 10 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE 1 Raw_Read_Error_Rate 0x000f 055 053 006 Pre-fail Always - 68659408 3 Spin_Up_Time 0x0003 097 096 000 Pre-fail Always - 0 4 Start_Stop_Count 0x0032 100 100 020 Old_age Always - 0 5 Reallocated_Sector_Ct 0x0033 098 098 036 Pre-fail Always - 86 7 Seek_Error_Rate 0x000f 081 060 030 Pre-fail Always - 155676638 9 Power_On_Hours 0x0032 087 087 000 Old_age Always - 12147 10 Spin_Retry_Count 0x0013 100 100 097 Pre-fail Always - 0 12 Power_Cycle_Count 0x0032 100 100 020 Old_age Always - 123 194 Temperature_Celsius 0x0022 054 058 000 Old_age Always - 54 195 Hardware_ECC_Recovered 0x001a 055 053 000 Old_age Always - 68659408 197 Current_Pending_Sector 0x0012 100 100 000 Old_age Always - 27 198 Offline_Uncorrectable 0x0010 100 100 000 Old_age Offline - 27 199 UDMA_CRC_Error_Count 0x003e 200 199 000 Old_age Always - 1 200 Multi_Zone_Error_Rate 0x0000 100 253 000 Old_age Offline - 0 202 TA_Increase_Count 0x0032 099 252 000 Old_age Always - 1 SMART Error Log Version: 1 ATA Error Count: 229 (device log contains only the most recent five errors) CR = Command Register [HEX] FR = Features Register [HEX] SC = Sector Count Register [HEX] SN = Sector Number Register [HEX] CL = Cylinder Low Register [HEX] CH = Cylinder High Register [HEX] DH = Device/Head Register [HEX] DC = Device Command Register [HEX] ER = Error register [HEX] ST = Status register [HEX] Powered_Up_Time is measured from power on, and printed as DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes, SS=sec, and sss=millisec. It "wraps" after 49.710 days. Error 229 occurred at disk power-on lifetime: 12145 hours (506 days + 1 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 40 51 08 3f 67 63 e0 Error: UNC 8 sectors at LBA = 0x0063673f = 6514495 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- 25 00 08 3f 67 63 e0 00 06:04:07.031 READ DMA EXT 25 00 01 00 00 00 e0 00 06:04:02.999 READ DMA EXT 25 00 01 00 00 00 e0 00 06:04:02.921 READ DMA EXT 25 00 01 00 00 00 e0 00 06:04:02.803 READ DMA EXT 25 00 80 9f 2c 24 e0 00 06:04:02.803 READ DMA EXT Error 228 occurred at disk power-on lifetime: 12145 hours (506 days + 1 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 40 51 08 3f 67 63 e0 Error: UNC 8 sectors at LBA = 0x0063673f = 6514495 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- 25 00 08 3f 67 63 e0 00 06:04:02.767 READ DMA EXT 25 00 80 bf 68 63 e0 00 06:04:02.999 READ DMA EXT 35 00 08 3f aa 61 e0 00 06:04:02.921 WRITE DMA EXT 35 00 08 0f aa 61 e0 00 06:04:02.803 WRITE DMA EXT 35 00 08 c7 a9 61 e0 00 06:04:02.803 WRITE DMA EXT Error 227 occurred at disk power-on lifetime: 12145 hours (506 days + 1 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 40 51 08 3f 67 63 e0 Error: UNC 8 sectors at LBA = 0x0063673f = 6514495 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- 25 00 08 3f 67 63 e0 00 06:03:58.496 READ DMA EXT 25 00 01 00 00 00 e0 00 06:03:58.496 READ DMA EXT 25 00 01 00 00 00 e0 00 06:03:58.485 READ DMA EXT 35 00 05 8f 5c e9 e0 00 06:03:58.484 WRITE DMA EXT 35 00 08 37 00 5e e0 00 06:03:58.483 WRITE DMA EXT Error 226 occurred at disk power-on lifetime: 12145 hours (506 days + 1 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 40 51 08 3f 67 63 e0 Error: UNC 8 sectors at LBA = 0x0063673f = 6514495 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- 25 00 08 3f 67 63 e0 00 06:03:54.385 READ DMA EXT 25 00 01 00 00 00 e0 00 06:03:54.378 READ DMA EXT 25 00 01 00 00 00 e0 00 06:03:54.378 READ DMA EXT 35 00 05 8f 5c e9 e0 00 06:03:54.378 WRITE DMA EXT 35 00 05 7f b3 ac e0 00 06:03:54.357 WRITE DMA EXT Error 225 occurred at disk power-on lifetime: 12145 hours (506 days + 1 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 40 51 80 3f 67 63 e0 Error: UNC 128 sectors at LBA = 0x0063673f = 6514495 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- 25 00 80 3f 67 63 e0 00 06:03:50.122 READ DMA EXT 25 00 80 bf 66 63 e0 00 06:03:50.120 READ DMA EXT 25 00 80 3f 66 63 e0 00 06:03:50.119 READ DMA EXT 25 00 08 37 65 63 e0 00 06:03:50.118 READ DMA EXT 25 00 08 2f 65 63 e0 00 06:03:50.117 READ DMA EXT SMART Self-test log structure revision number 1 No self-tests have been logged. [To run self-tests, use: smartctl -t] SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay.