[globals]
#include globals_custom.conf
VM_PREFIX = *
RINGTIMER = 15
REGTIME = 7:55-17:05
REGDAYS = mon-fri
RECORDEXTEN = ""
PARKNOTIFY = SIP/200
OUT_3 = ZAP/2
OUT_1 = ZAP/1
OUTPREFIX_3 = 
OUTPREFIX_1 = 
OUTMAXCHANS_3 = 
OUTMAXCHANS_1 = 2
OUTCID_3 = 
OUTCID_1 = 912-727-4411
OPERATOR = 
NULL = ""
IN_OVERRIDE = forcereghours
INCOMING = GRP-1
FAX_RX_EMAIL = fax@mydomain.com
FAX_RX = system
FAX = 
DIRECTORY_OPTS = 
DIRECTORY = last
DIAL_OUT = 9
DIAL_OPTIONS = tr
DIALOUTIDS = 1/3/
CALLFILENAME = ""
AFTER_INCOMING = EXT-100

[ext-did]
include => ext-did-custom
exten => s,1,SetVar(FROM_DID=s)
exten => s,2,Goto(ext-local,200,1)
exten => _X.,1,Goto(s)

[ext-group]
include => ext-group-custom
exten => 1,1,Macro(rg-group,ringall,30,,200)
exten => 1,2,Goto(ext-local,200,1)	; jump

[ext-local]
include => ext-local-custom
exten => 200,1,Macro(exten-vm,200,200)
exten => ${VM_PREFIX}200,1,Macro(vm,200)
exten => 200,hint,SIP/200

[outbound-allroutes]
include => outbound-allroutes-custom
include => outrt-001-local
include => outrt-002-ld

[outbound-trunks]
include => outbound-trunks-custom
exten => _${DIAL_OUT_1}.,1,Macro(dialout,1,${EXTEN})

[outrt-001-local]
include => outrt-001-local-custom
exten => _NXXNXXXXXX,1,Macro(dialout-trunk,3,${EXTEN},)
exten => _NXXNXXXXXX,2,Macro(dialout-trunk,1,${EXTEN},)
exten => _NXXNXXXXXX,3,Macro(outisbusy)	; No available circuits
exten => _NXXXXXX,1,Macro(dialout-trunk,3,${EXTEN},)
exten => _NXXXXXX,2,Macro(dialout-trunk,1,${EXTEN},)
exten => _NXXXXXX,3,Macro(outisbusy)	; No available circuits

[outrt-002-ld]
include => outrt-002-ld-custom
exten => _1NXXNXXXXXX,1,Macro(dialout-trunk,1,${EXTEN},)
exten => _1NXXNXXXXXX,2,Macro(dialout-trunk,2,${EXTEN},)
exten => _1NXXNXXXXXX,3,Macro(outisbusy)	; No available circuits
exten => _NXXNXXXXXX,1,Macro(dialout-trunk,1,${EXTEN},)
exten => _NXXNXXXXXX,2,Macro(dialout-trunk,2,${EXTEN},)
exten => _NXXNXXXXXX,3,Macro(outisbusy)	; No available circuits

####################################################################
# this is zapata-auto.conf                                         #
####################################################################

; Autogenerated by /usr/local/sbin/genzaptelconf -- do not hand edit
; Zaptel Channels Configurations (zapata.conf)
;
; This is not intended to be a complete zapata.conf. Rather, it is intended 
; to be #include-d by /etc/zapata.conf that will include the global settings
;
callerid=asreceived

; Span 1: WCFXO/0 "Generic Clone Board 1" RED 
signalling=fxs_ks
; Note: this is a trunk. Create a ZAP trunk in AMP for Channel 1
context=from-pstn
group=0
channel => 1


; Span 2: WCFXO/1 "Generic Clone Board 2" RED 
signalling=fxs_ks
; Note: this is a trunk. Create a ZAP trunk in AMP for Channel 2
context=from-pstn
group=0
channel => 2


; Span 3: ZTDUMMY/1 "ZTDUMMY/1 1" 


######################################################################
#   This is zapata.conf                                              #
######################################################################

;
; Zapata telephony interface
;
; Configuration file

[trunkgroups]

[channels]

language=en
context=from-pstn
signalling=fxs_ks
rxwink=300		; Atlas seems to use long (250ms) winks
;
; Whether or not to do distinctive ring detection on FXO lines
;
;usedistinctiveringdetection=yes

usecallerid=yes
hidecallerid=no
callwaiting=yes
usecallingpres=yes
callwaitingcallerid=yes
threewaycalling=yes
transfer=yes
cancallforward=yes
callreturn=yes
echocancel=yes
echocancelwhenbridged=no
echotraining=800
rxgain=0.0
txgain=0.0
group=0
callgroup=1
pickupgroup=1
immediate=no

;faxdetect=both
faxdetect=incoming
;faxdetect=outgoing
;faxdetect=no

;Include genzaptelconf configs
#include zapata-auto.conf

group=1

;Include AMP configs
#include zapata_additional.conf