Harry.tcl help file. Ok let's get started.

1. How to set up a eggdrop with Harry botpack:

2. First you need a shell.
You can Google this "irc shell", most you have pay for free ones you'll be lucky to get.

3. You need to download putty if you don't already have it.
You can download putty from: http://www.putty.nl/latest/x86/putty.exe, but if the url down you can always google for "Putty"

4. Afrer that now you can login.
Ok now open putty.exe and no its not a virus, after you open it you should see hostname (or IP address), enter your shell hostname or ip there, then you should see port the default  is "22" most shells uses it, if it don't work ask your admin what is the port for ssh.

5. First download a eggdrop, here's an example:


6. Ok after you did wget now to extract it, here's an example:
tar zxvf eggdrop-latest.tar.gz

7. Now After 6. you need to cd to the dir, here's an example:
cd eggdrop1.6.18 
that is the version i used to make this tuts

8. Now after 7., you now need to "configure" it here's an example:
./configure
Now wait for 4 5  and it be done.

9. now you need to "make config" here's an example:
make config
Now wait for 6 8  and it be done.

10. now you need to "make", here's an example:
make
Now wait for 6 8  and it be done.

11. Now you need to intall it to /home/username/eggdrop. by this command  example below
make install
and it should be installed.

12. Now you need to exit out of the dir, has showin below:
cd.

13. Now you need to remove eggdrop-latest.tar.gz here's an example:
rm eggdrop-latest.tar.gz

14. Now you have cd to the bot dir, here's an example:
cd eggdrop

15. Now the Configing starts