lutra@lutra-laptop:~$ sudo wpa_supplicant -i eth1 -D wext -dd -c wpa
Password:
Initializing interface 'eth1' conf 'wpa' driver 'wext' ctrl_interface 'N/A'
Configuration file 'wpa' -> '/home/lutra/wpa'
Reading configuration file '/home/lutra/wpa'
ctrl_interface='/var/run/wpa_supplicant'
Line: 5 - start of a new network block
ssid - hexdump_ascii(len=4):
     68 6f 6d 65                                       home
key_mgmt: 0x4
Priority group 0
   id=0 ssid='home'
Initializing interface (2) 'eth1'
EAPOL: SUPP_PAE entering state DISCONNECTED
EAPOL: KEY_RX entering state NO_KEY_RECEIVE
EAPOL: SUPP_BE entering state INITIALIZE
EAP: EAP entering state DISABLED
EAPOL: External notification - portEnabled=0
EAPOL: External notification - portValid=0
SIOCGIWRANGE: WE(compiled)=19 WE(source)=14 enc_capa=0x0
  capabilities: key_mgmt 0x0 enc 0x3
Own MAC address: 00:02:2d:a9:e9:82
wpa_driver_wext_set_wpa
ioctl[SIOCSIWAUTH]: Operation not supported
WEXT auth param 7 value 0x1 - Driver does not support WPA.
wpa_driver_wext_set_key: alg=0 key_idx=0 set_tx=0 seq_len=0 key_len=0
ioctl[SIOCSIWENCODEEXT]: Operation not supported
Driver did not support SIOCSIWENCODEEXT, trying SIOCSIWENCODE
ioctl[SIOCSIWENCODE]: Invalid argument
wpa_driver_wext_set_key: alg=0 key_idx=1 set_tx=0 seq_len=0 key_len=0
ioctl[SIOCSIWENCODEEXT]: Operation not supported
Driver did not support SIOCSIWENCODEEXT, trying SIOCSIWENCODE
ioctl[SIOCSIWENCODE]: Invalid argument
wpa_driver_wext_set_key: alg=0 key_idx=2 set_tx=0 seq_len=0 key_len=0
ioctl[SIOCSIWENCODEEXT]: Operation not supported
Driver did not support SIOCSIWENCODEEXT, trying SIOCSIWENCODE
ioctl[SIOCSIWENCODE]: Invalid argument
wpa_driver_wext_set_key: alg=0 key_idx=3 set_tx=0 seq_len=0 key_len=0
ioctl[SIOCSIWENCODEEXT]: Operation not supported
Driver did not support SIOCSIWENCODEEXT, trying SIOCSIWENCODE
ioctl[SIOCSIWENCODE]: Invalid argument
wpa_driver_wext_set_countermeasures
ioctl[SIOCSIWAUTH]: Operation not supported
WEXT auth param 4 value 0x0 - wpa_driver_wext_set_drop_unencrypted
ioctl[SIOCSIWAUTH]: Operation not supported
WEXT auth param 5 value 0x1 - Setting scan request: 0 sec 100000 usec
Added interface eth1
Wireless event: cmd=0x8b06 len=8
RTM_NEWLINK, IFLA_IFNAME: Interface 'eth1' added
RTM_NEWLINK, IFLA_IFNAME: Interface 'eth1' added
State: DISCONNECTED -> SCANNING
Starting AP scan (broadcast SSID)
RTM_NEWLINK, IFLA_IFNAME: Interface 'eth1' added
Wireless event: cmd=0x8b15 len=20
Wireless event: new AP: 00:06:25:92:6f:b5
State: SCANNING -> ASSOCIATED
Associated to a new BSS: BSSID=00:06:25:92:6f:b5
No keys have been configured - skip key clearing
No network configuration found for the current AP
State: ASSOCIATED -> DISCONNECTED
wpa_driver_wext_disassociate
ioctl[SIOCSIWMLME]: Operation not supported
No keys have been configured - skip key clearing
EAPOL: External notification - portEnabled=0
EAPOL: External notification - portValid=0
Wireless event: cmd=0x8b19 len=8
Received 68 bytes of scan results (1 BSSes)
Scan results: 1
Selecting BSS from priority group 0
0: 00:06:25:92:6f:b5 ssid='home' wpa_ie_len=0 rsn_ie_len=0 caps=0x1
   skip - no WPA/RSN IE
   selected non-WPA AP 00:06:25:92:6f:b5 ssid='home'
Already associated with the selected AP.
Wireless event: cmd=0x8b19 len=8
Received 68 bytes of scan results (1 BSSes)
Scan results: 1
Selecting BSS from priority group 0
0: 00:06:25:92:6f:b5 ssid='home' wpa_ie_len=0 rsn_ie_len=0 caps=0x1
   skip - no WPA/RSN IE
   selected non-WPA AP 00:06:25:92:6f:b5 ssid='home'
Already associated with the selected AP.
CTRL-EVENT-TERMINATING - signal 2 received
Removing interface eth1
State: DISCONNECTED -> DISCONNECTED
wpa_driver_wext_deauthenticate
ioctl[SIOCSIWMLME]: Operation not supported
No keys have been configured - skip key clearing
EAPOL: External notification - portEnabled=0
EAPOL: External notification - portValid=0
wpa_driver_wext_set_wpa
ioctl[SIOCSIWAUTH]: Operation not supported
WEXT auth param 7 value 0x0 - Failed to disable WPA in the driver.
wpa_driver_wext_set_drop_unencrypted
ioctl[SIOCSIWAUTH]: Operation not supported
WEXT auth param 5 value 0x0 - wpa_driver_wext_set_countermeasures
ioctl[SIOCSIWAUTH]: Operation not supported
WEXT auth param 4 value 0x0 - No keys have been configured - skip key clearing
Cancelling scan request
lutra@lutra-laptop:~$ sudo wpa_supplicant -i eth1 -D wext -dd -c wpa
Initializing interface 'eth1' conf 'wpa' driver 'wext' ctrl_interface 'N/A'
Configuration file 'wpa' -> '/home/lutra/wpa'
Reading configuration file '/home/lutra/wpa'
ctrl_interface='/var/run/wpa_supplicant'
Line: 5 - start of a new network block
ssid - hexdump_ascii(len=4):
     68 6f 6d 65                                       home
key_mgmt: 0x4
Priority group 0
   id=0 ssid='home'
Initializing interface (2) 'eth1'
EAPOL: SUPP_PAE entering state DISCONNECTED
EAPOL: KEY_RX entering state NO_KEY_RECEIVE
EAPOL: SUPP_BE entering state INITIALIZE
EAP: EAP entering state DISABLED
EAPOL: External notification - portEnabled=0
EAPOL: External notification - portValid=0
SIOCGIWRANGE: WE(compiled)=19 WE(source)=14 enc_capa=0x0
  capabilities: key_mgmt 0x0 enc 0x3
Own MAC address: 00:02:2d:a9:e9:82
wpa_driver_wext_set_wpa
ioctl[SIOCSIWAUTH]: Operation not supported
WEXT auth param 7 value 0x1 - Driver does not support WPA.
wpa_driver_wext_set_key: alg=0 key_idx=0 set_tx=0 seq_len=0 key_len=0
ioctl[SIOCSIWENCODEEXT]: Operation not supported
Driver did not support SIOCSIWENCODEEXT, trying SIOCSIWENCODE
ioctl[SIOCSIWENCODE]: Invalid argument
wpa_driver_wext_set_key: alg=0 key_idx=1 set_tx=0 seq_len=0 key_len=0
ioctl[SIOCSIWENCODEEXT]: Operation not supported
Driver did not support SIOCSIWENCODEEXT, trying SIOCSIWENCODE
ioctl[SIOCSIWENCODE]: Invalid argument
wpa_driver_wext_set_key: alg=0 key_idx=2 set_tx=0 seq_len=0 key_len=0
ioctl[SIOCSIWENCODEEXT]: Operation not supported
Driver did not support SIOCSIWENCODEEXT, trying SIOCSIWENCODE
ioctl[SIOCSIWENCODE]: Invalid argument
wpa_driver_wext_set_key: alg=0 key_idx=3 set_tx=0 seq_len=0 key_len=0
ioctl[SIOCSIWENCODEEXT]: Operation not supported
Driver did not support SIOCSIWENCODEEXT, trying SIOCSIWENCODE
ioctl[SIOCSIWENCODE]: Invalid argument
wpa_driver_wext_set_countermeasures
ioctl[SIOCSIWAUTH]: Operation not supported
WEXT auth param 4 value 0x0 - wpa_driver_wext_set_drop_unencrypted
ioctl[SIOCSIWAUTH]: Operation not supported
WEXT auth param 5 value 0x1 - Setting scan request: 0 sec 100000 usec
Added interface eth1
Wireless event: cmd=0x8b06 len=8
RTM_NEWLINK, IFLA_IFNAME: Interface 'eth1' added
RTM_NEWLINK, IFLA_IFNAME: Interface 'eth1' added
State: DISCONNECTED -> SCANNING
Starting AP scan (broadcast SSID)
RTM_NEWLINK, IFLA_IFNAME: Interface 'eth1' added
Wireless event: cmd=0x8b15 len=20
Wireless event: new AP: 00:06:25:92:6f:b5
State: SCANNING -> ASSOCIATED
Associated to a new BSS: BSSID=00:06:25:92:6f:b5
No keys have been configured - skip key clearing
No network configuration found for the current AP
State: ASSOCIATED -> DISCONNECTED
wpa_driver_wext_disassociate
ioctl[SIOCSIWMLME]: Operation not supported
No keys have been configured - skip key clearing
EAPOL: External notification - portEnabled=0
EAPOL: External notification - portValid=0
Wireless event: cmd=0x8b19 len=8
Received 68 bytes of scan results (1 BSSes)
Scan results: 1
Selecting BSS from priority group 0
0: 00:06:25:92:6f:b5 ssid='home' wpa_ie_len=0 rsn_ie_len=0 caps=0x1
   skip - no WPA/RSN IE
   selected non-WPA AP 00:06:25:92:6f:b5 ssid='home'
Already associated with the selected AP.
Wireless event: cmd=0x8b19 len=8
Received 68 bytes of scan results (1 BSSes)
Scan results: 1
Selecting BSS from priority group 0
0: 00:06:25:92:6f:b5 ssid='home' wpa_ie_len=0 rsn_ie_len=0 caps=0x1
   skip - no WPA/RSN IE
   selected non-WPA AP 00:06:25:92:6f:b5 ssid='home'
Already associated with the selected AP.
Wireless event: cmd=0x8b19 len=8
Received 68 bytes of scan results (1 BSSes)
Scan results: 1
Selecting BSS from priority group 0
0: 00:06:25:92:6f:b5 ssid='home' wpa_ie_len=0 rsn_ie_len=0 caps=0x1
   skip - no WPA/RSN IE
   selected non-WPA AP 00:06:25:92:6f:b5 ssid='home'
Already associated with the selected AP.