System ----------------------- K3b Version: 0.12.14 KDE Version: 3.5.2 QT Version: 3.3.6 Kernel: 2.6.15-28-386 Devices ----------------------- HL-DT-ST DVD+-RW GSA-T11N A103 (/dev/scd0, /dev/sg1) at /media/cdrom0 [CD-R; CD-RW; CD-ROM; DVD-ROM; DVD-R; DVD-RW; DVD+R; DVD+RW; DVD+R DL] [DVD-ROM; DVD-R Sequential; DVD-RW Restricted Overwrite; DVD-RW Sequential; DVD+RW; DVD+R; DVD+R Double Layer; CD-ROM; CD-R; CD-RW] [SAO; TAO; RAW; SAO/R96P; SAO/R96R; RAW/R16; RAW/R96P; RAW/R96R; Restricted Overwrite] Used versions ----------------------- cdrecord: 2.1.1a01 cdrecord ----------------------- /usr/bin/cdrecord: Warning: Running on Linux-2.6.15-28-386 /usr/bin/cdrecord: There are unsettled issues with Linux-2.5 and newer. /usr/bin/cdrecord: If you have unexpected problems, please try Linux-2.4 or Solaris. scsidev: '1,0,0' scsibus: 1 target: 0 lun: 0 Linux sg driver version: 3.5.33 /usr/bin/cdrecord: Warning: using inofficial version of libscg (debian-0.8debian2 '@(#)scsitransp.c 1.91 04/06/17 Copyright 1988,1995,2000-2004 J. Schilling'). SCSI buffer size: 64512 /usr/bin/cdrecord: This version of cdrecord does not include DVD-R/DVD-RW support code. /usr/bin/cdrecord: See /usr/share/doc/cdrecord/README.DVD.Debian for details on DVD support. Cdrecord-Clone 2.01.01a01 (i686-pc-linux-gnu) Copyright (C) 1995-2004 Joerg Schilling NOTE: this version of cdrecord is an inofficial (modified) release of cdrecord and thus may have bugs that are not present in the original version. Please send bug reports and support requests to . The original author should not be bothered with problems of this version. TOC Type: 1 = CD-ROM Using libscg version 'debian-0.8debian2'. Driveropts: 'burnfree' atapi: 1 Device type : Removable CD-ROM Version : 5 Response Format: 2 Capabilities : Vendor_info : 'HL-DT-ST' Identifikation : 'DVD+-RW GSA-T11N' Revision : 'A103' Device seems to be: Generic mmc2 DVD-R/DVD-RW. Current: 0x000A Profile: 0x0011 Profile: 0x0014 Profile: 0x0013 Profile: 0x001A Profile: 0x001B Profile: 0x002B Profile: 0x0010 Profile: 0x0009 Profile: 0x000A (current) Profile: 0x0008 Using generic SCSI-3/mmc CD-R/CD-RW driver (mmc_cdr). Driver flags : MMC-3 SWABAUDIO BURNFREE Supported modes: TAO PACKET SAO SAO/R96P SAO/R96R RAW/R16 RAW/R96P RAW/R96R Drive buf size : 1053696 = 1029 KB Drive DMA Speed: 13903 kB/s 78x CD 10x DVD FIFO size : 4194304 = 4096 KB Track 01: data 694 MB Total size: 797 MB (78:58.72) = 355404 sectors Lout start: 797 MB (79:00/54) = 355404 sectors Current Secsize: 2048 ATIP info from disk: Indicated writing power: 3 Reference speed: 6 Is not unrestricted Is erasable Disk sub type: High speed Rewritable (CAV) media (1) ATIP start of lead in: -11745 (97:25/30) ATIP start of lead out: 359848 (79:59/73) 1T speed low: 4 1T speed high: 10 2T speed low: 4 2T speed high: 0 (reserved val 6) power mult factor: 1 5 recommended erase/write power: 5 A1 values: 24 1A D8 A2 values: 26 B2 4A Disk type: Phase change Manuf. index: 40 Manufacturer: INFODISC Technology Co., Ltd. Blocks total: 359848 Blocks current: 359848 Blocks remaining: 4444 Starting to write CD/DVD at speed 10 in dummy SAO mode for single session. Last chance to quit, starting dummy write in 2 seconds. 1 seconds. 0 seconds. Operation starts. Waiting for reader process to fill input buffer ... input buffer ready. BURN-Free is OFF. Turning BURN-Free on Sending CUE sheet... /usr/bin/cdrecord: WARNING: Drive returns wrong startsec (0) using -150 /usr/bin/cdrecord: Input/output error. write_g1: scsi sendcmd: no error CDB: 2A 00 FF FF FF 6A 00 00 1F 00 status: 0x2 (CHECK CONDITION) Sense Bytes: 70 00 05 00 00 00 00 10 2A 00 00 90 30 05 00 00 Sense Key: 0x5 Illegal Request, Segment 0 Sense Code: 0x30 Qual 0x05 (cannot write medium - incompatible format) Fru 0x0 Sense flags: Blk 0 (not valid) cmd finished after 0.017s timeout 200s Writing pregap for track 1 at -150 write track pad data: error after 0 bytes BFree: 1029 K BSize: 1029 K Starting new track at sector: 0 Track 01: 0 of 694 MB written. /usr/bin/cdrecord: Input/output error. write_g1: scsi sendcmd: no error CDB: 2A 00 00 00 00 00 00 00 1F 00 status: 0x2 (CHECK CONDITION) Sense Bytes: 70 00 05 00 00 00 00 10 2A 00 00 90 30 05 00 00 Sense Key: 0x5 Illegal Request, Segment 0 Sense Code: 0x30 Qual 0x05 (cannot write medium - incompatible format) Fru 0x0 Sense flags: Blk 0 (not valid) cmd finished after 0.016s timeout 200s /usr/bin/cdrecord: A write error occured. /usr/bin/cdrecord: Please properly read the error message above. write track data: error after 0 bytes Writing time: 33.394s Average write speed 142.3x. Fixating... WARNING: Some drives don't like fixation in dummy mode. Fixating time: 0.004s /usr/bin/cdrecord: fifo had 64 puts and 1 gets. /usr/bin/cdrecord: fifo was 0 times empty and 0 times full, min fill was 100%. cdrecord command: ----------------------- /usr/bin/cdrecord.mmap -v gracetime=2 dev=1,0,0 speed=10 -dao -dummy driveropts=burnfree -eject -data /home/clemons/Desktop/kubuntu-7.04-desktop-i386.iso