CISCO-CONFIG-COPY-MIB DEFINITIONS ::= BEGIN

IMPORTS
        MODULE-IDENTITY, OBJECT-TYPE, NOTIFICATION-TYPE,
        IpAddress, Unsigned32
                FROM SNMPv2-SMI
        TEXTUAL-CONVENTION, DisplayString, TimeStamp, RowStatus,
        TruthValue
                FROM SNMPv2-TC
        MODULE-COMPLIANCE, OBJECT-GROUP, NOTIFICATION-GROUP
                FROM SNMPv2-CONF
        ciscoMgmt
                FROM CISCO-SMI;

ciscoConfigCopyMIB  MODULE-IDENTITY
        LAST-UPDATED    "200212170000Z"
        ORGANIZATION        "Cisco Systems, Inc."
        CONTACT-INFO
                "        Cisco Systems
                        Customer Service

                Postal:        170 W. Tasman Drive
                        San Jose, CA  95134
                        USA

                Tel: +1 800 553-NETS

                E-mail:        cs-snmp@cisco.com"
        DESCRIPTION
                "This MIB facilitates writing of configuration files
                of an SNMP Agent running Cisco's IOS in the following 
                ways: to and from the net, copying running 
                configurations to startup configurations and 
                vice-versa, and copying a configuration
                (running or startup) to and from the local 
                IOS file system."
        REVISION        "200212170000Z"
        DESCRIPTION
                "Added a new enumeration value someConfigApplyFailed(7)
                to ConfigCopyFailCause TC."
        REVISION        "200205300000Z"
        DESCRIPTION
                "Added sftp protocol as an option for 
                ConfigCopyProtocol."
        REVISION        "200205070000Z"
        DESCRIPTION
                "Added scp protocol as an option for ConfigCopyProtocol.
                Added unsupportedProtocol(6) as an option for the 
                ConfigCopyFailCause TC."

        REVISION "200203280000Z"
        DESCRIPTION
                "Imported Unsigned32 from SNMPv2-SMI instead of
                CISCO-TC"
        ::= { ciscoMgmt 96 }

-- A config-copy operation is a request to copy a configuration 
-- file of an SNMP Agent running Cisco's IOS in the following ways:
--      1. to or from the net (via a protocol like tftp, ftp, rcp,
--      scp or sftp).
--      2. copying running configurations to startup
--      configurations and vice-versa.
--      3. copy a running or startup config to a file
--      to the local IOS file system and vice versa."
--
-- The term "agent-config" will be used in this MIB to refer to 
-- either the running config or the startup config. It will be 
-- used as a short way of saying "either running config or the 
-- startup config".