Ethernet Channel Bonding Driver: v3.1.2 (January 20, 2007)
bonding: In ALB mode you might experience client disconnections upon reconnection of a link if the bonding module updelay parameter (0 msec) is incompatible with the forwarding delay time of the switch
bonding: MII link monitoring set to 100 ms
bonding: bond0: enslaving eth0 as an active interface with a down link.
bonding: bond0: enslaving eth1 as an active interface with a down link.
tg3: eth1: Link is up at 1000 Mbps, full duplex.
tg3: eth1: Flow control is off for TX and off for RX.
bonding: bond0: link status definitely up for interface eth1.
bonding: bond0: making interface eth1 the new active one.
RTNL: assertion failed at net/ipv4/devinet.c (1056)
 [<c03a2a62>] inetdev_event+0x292/0x2f0
 [<c02c22be>] get_random_bytes+0x1e/0x30
 [<c03caf58>] _spin_lock_bh+0x8/0x20
 [<c0379058>] rt_run_flush+0xb8/0xd0
 [<c012a415>] notifier_call_chain+0x25/0x40
 [<c03609fd>] dev_set_mac_address+0x5d/0x60
 [<f88b2d76>] alb_set_slave_mac_addr+0x76/0xa0 [bonding]
 [<f88b31f6>] alb_swap_mac_addr+0x76/0x190 [bonding]
 [<f88ad3c6>] bond_change_active_slave+0x336/0x3c0 [bonding]
 [<f88ad797>] bond_select_active_slave+0x97/0x130 [bonding]
 [<f88af6da>] bond_mii_monitor+0x16a/0x4f0 [bonding]
 [<c0126be0>] lock_timer_base+0x20/0x50
 [<f88b42fe>] bond_alb_monitor+0xbe/0x270 [bonding]
 [<f88af570>] bond_mii_monitor+0x0/0x4f0 [bonding]
 [<c01261c1>] run_timer_softirq+0x121/0x180
 [<c011aef3>] scheduler_tick+0x13/0xb0
 [<c0122aa2>] __do_softirq+0x82/0xf0
 [<c0122b47>] do_softirq+0x37/0x40
 [<c010d285>] smp_apic_timer_interrupt+0x55/0x90
 [<c010352c>] apic_timer_interrupt+0x28/0x30
 [<c028007b>] twofish_setkey+0x4dbb/0x77e0
 [<c0100c66>] mwait_idle_with_hints+0x46/0x60
 [<c0100dcd>] cpu_idle+0x6d/0x90
 =======================
RTNL: assertion failed at net/ipv4/devinet.c (1056)
 [<c03a2a62>] inetdev_event+0x292/0x2f0
 [<c03caf5b>] _spin_lock_bh+0xb/0x20
 [<c03caf58>] _spin_lock_bh+0x8/0x20
 [<c0379058>] rt_run_flush+0xb8/0xd0
 [<c012a415>] notifier_call_chain+0x25/0x40
 [<c03609fd>] dev_set_mac_address+0x5d/0x60
 [<f88b2d76>] alb_set_slave_mac_addr+0x76/0xa0 [bonding]
 [<f88b3205>] alb_swap_mac_addr+0x85/0x190 [bonding]
 [<f88ad3c6>] bond_change_active_slave+0x336/0x3c0 [bonding]
 [<f88ad797>] bond_select_active_slave+0x97/0x130 [bonding]
 [<f88af6da>] bond_mii_monitor+0x16a/0x4f0 [bonding]
 [<c0126be0>] lock_timer_base+0x20/0x50
 [<f88b42fe>] bond_alb_monitor+0xbe/0x270 [bonding]
 [<f88af570>] bond_mii_monitor+0x0/0x4f0 [bonding]
 [<c01261c1>] run_timer_softirq+0x121/0x180
 [<c011aef3>] scheduler_tick+0x13/0xb0
 [<c0122aa2>] __do_softirq+0x82/0xf0
 [<c0122b47>] do_softirq+0x37/0x40
 [<c010d285>] smp_apic_timer_interrupt+0x55/0x90
 [<c010352c>] apic_timer_interrupt+0x28/0x30
 [<c028007b>] twofish_setkey+0x4dbb/0x77e0
 [<c0100c66>] mwait_idle_with_hints+0x46/0x60
 [<c0100dcd>] cpu_idle+0x6d/0x90
 =======================
device eth1 entered promiscuous mode
bonding: bond0: first active interface up!
tg3: eth0: Link is up at 1000 Mbps, full duplex.
tg3: eth0: Flow control is off for TX and off for RX.
bonding: bond0: link status definitely up for interface eth0.
device eth1 left promiscuous mode
kjournald starting.  Commit interval 5 seconds