Linux version 2.4.27-2-386 (horms@tabatha.lab.ultramonkey.org) (gcc version 3.3.5 (Debian 1:3.3.5-13)) #1 Wed Aug 17 09:33:35 UTC 2005 BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 00000000000a0000 (usable) BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 0000000008000000 (usable) BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved) 128MB LOWMEM available. On node 0 totalpages: 32768 zone(0): 4096 pages. zone(1): 28672 pages. zone(2): 0 pages. ACPI disabled because your bios is from 97 and too old You can enable it with acpi=force Kernel command line: root=/dev/hdc1 ro No local APIC present or hardware disabled Initializing CPU#0 Detected 200.461 MHz processor. Console: colour VGA+ 80x25 Calibrating delay loop... 399.76 BogoMIPS Memory: 123660k/131072k available (1069k kernel code, 7028k reserved, 459k data, 96k init, 0k highmem) Dentry cache hash table entries: 16384 (order: 5, 131072 bytes) Inode cache hash table entries: 8192 (order: 4, 65536 bytes) Mount cache hash table entries: 512 (order: 0, 4096 bytes) Buffer cache hash table entries: 8192 (order: 3, 32768 bytes) Page-cache hash table entries: 32768 (order: 5, 131072 bytes) Intel Pentium with F0 0F bug - workaround enabled. CPU: After generic, caps: 008001bf 00000000 00000000 00000000 CPU: Common caps: 008001bf 00000000 00000000 00000000 CPU: Intel Pentium MMX stepping 03 Checking 'hlt' instruction... OK. Checking for popad bug... OK. POSIX conformance testing by UNIFIX ACPI: Subsystem revision 20040326 ACPI: Interpreter disabled. PCI: PCI BIOS revision 2.10 entry at 0xfb3f0, last bus=0 PCI: Using configuration type 1 PCI: Probing PCI hardware PCI: Probing PCI hardware (bus 00) PCI: Using IRQ router default [1106/1595] at 00:00.0 Activating ISA DMA hang workarounds. Linux NET4.0 for Linux 2.4 Based upon Swansea University Computer Society NET3.039 Initializing RT netlink socket Starting kswapd VFS: Disk quotas vdquot_6.5.1 devfs: v1.12c (20020818) Richard Gooch (rgooch@atnf.csiro.au) devfs: boot_options: 0x0 Detected PS/2 Mouse Port. pty: 256 Unix98 ptys configured Serial driver version 5.05c (2001-07-08) with HUB-6 MANY_PORTS MULTIPORT SHARE_IRQ SERIAL_PCI enabled ttyS00 at 0x03f8 (irq = 4) is a 16550A ttyS01 at 0x02f8 (irq = 3) is a 16550A COMX: driver version 0.85 (C) 1995-1999 ITConsult-Pro Co. RAMDISK driver initialized: 16 RAM disks of 8192K size 1024 blocksize Initializing Cryptographic API NET4: Linux TCP/IP 1.0 for NET4.0 IP: routing cache hash table of 1024 buckets, 8Kbytes TCP: Hash tables configured (established 8192 bind 16384) Linux IP multicast router 0.06 plus PIM-SM RAMDISK: cramfs filesystem found at block 0 RAMDISK: Loading 3692 blocks [1 disk] into ram disk... done. Freeing initrd memory: 3692k freed VFS: Mounted root (cramfs filesystem). Freeing unused kernel memory: 96k freed NET4: Unix domain sockets 1.0/SMP for Linux NET4.0. Uniform Multi-Platform E-IDE driver Revision: 7.00beta4-2.4 ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx ide: late registration of driver. VP_IDE: IDE controller at PCI slot 00:07.1 VP_IDE: chipset revision 6 VP_IDE: not 100% native mode: will probe irqs later ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx VP_IDE: VIA vt82c586b (rev 41) IDE UDMA33 controller on pci00:07.1 ide0: BM-DMA at 0xf000-0xf007, BIOS settings: hda:pio, hdb:pio ide1: BM-DMA at 0xf008-0xf00f, BIOS settings: hdc:pio, hdd:pio hdc: ST32122A, ATA DISK drive blk: queue c8825fb4, I/O limit 4095Mb (mask 0xffffffff) ide1 at 0x170-0x177,0x376 on irq 15 hdc: attached ide-disk driver. hdc: 4124736 sectors (2112 MB) w/128KiB Cache, CHS=4092/16/63, UDMA(33) Partition check: /dev/ide/host0/bus1/target0/lun0: [PTBL] [256/255/63] p1 p2 < p5 > Journalled Block Device driver loaded EXT3-fs: INFO: recovery required on readonly filesystem. EXT3-fs: write access will be enabled during recovery. kjournald starting. Commit interval 5 seconds EXT3-fs: ide1(22,1): orphan cleanup on readonly fs ext3_orphan_cleanup: deleting unreferenced inode 793136 ext3_orphan_cleanup: deleting unreferenced inode 314799 EXT3-fs: ide1(22,1): 2 orphan inodes deleted EXT3-fs: recovery complete. EXT3-fs: mounted filesystem with ordered data mode. Adding Swap: 120448k swap-space (priority -1) EXT3 FS 2.4-0.9.19, 19 August 2002 on ide1(22,1), internal journal Real Time Clock Driver v1.10f 3c59x: Donald Becker and others. www.scyld.com/network/vortex.html See Documentation/networking/vortex.txt 00:09.0: 3Com PCI 3c900 Boomerang 10Mbps Combo at 0xf200. Vers LK1.1.18-ac 00:60:08:64:72:4e, IRQ 9 product code 4b4c rev 00.0 date 10-16-97 Internal config register is 10302d8, transceivers 0xe138. 8K word-wide RAM 3:5 Rx:Tx split, autoselect/10baseT interface. Enabling bus-master transmits and whole-frame receives. 00:09.0: scatter/gather enabled. h/w checksums disabled eth0: Dropping NETIF_F_SG since no checksum feature. 8139too Fast Ethernet driver 0.9.26 eth1: RealTek RTL8139 at 0xf300, 00:0e:2e:69:b5:bb, IRQ 10 eth1: Identified 8139 chip type 'RTL-8100B/8139D' hermes.c: 4 Dec 2002 David Gibson orinoco.c 0.13d (David Gibson and others) orinoco_pci.c 0.13d (David Gibson & Jean Tourrilhes ) Detected Orinoco/Prism2 PCI device at 00:0b.0, mem:0xE4001000 to 0xE4001FFF -> 0xc8895000, irq:11 Reset done.....................................................................................................................................................................................................................................................; Clear Reset..................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................; pci_cor : reg = 0x0 - 2021 - 1FEF eth2: Station identity 001f:0006:0001:0005 eth2: Looks like an Intersil firmware version 1.5.6 eth2: Ad-hoc demo mode supported eth2: IEEE standard IBSS ad-hoc mode supported eth2: WEP supported, 104-bit key eth2: MAC address 00:60:B3:6A:5D:6E eth2: Station name "Prism I" eth2: ready usb.c: registered new driver usbdevfs usb.c: registered new driver hub usb-uhci.c: $Revision: 1.275 $ time 09:50:48 Aug 17 2005 usb-uhci.c: High bandwidth mode enabled usb-uhci.c: USB UHCI at I/O 0xf100, IRQ 5 usb-uhci.c: Detected 2 ports usb.c: new USB bus registered, assigned bus number 1 hub.c: USB hub found hub.c: 2 ports detected usb-uhci.c: v1.275:USB Universal Host Controller Interface driver 8139cp: 10/100 PCI Ethernet driver v1.2 (Mar 22, 2004) uhci.c: USB Universal Host Controller Interface driver v1.1 eth1: link up, 10Mbps, half-duplex, lpa 0x0000 parport0: PC-style at 0x378 (0x778) [PCSPP,TRISTATE] parport0: irq 7 detected lp0: using parport0 (polling). NET4: AppleTalk 0.18a for Linux NET4.0