boot: fedora7-amd64 noapic nohpet Loading /fedora/7/x86_64/vmlinuz................................. Loading /fedora/7/x86_64/initrd.img......................................................................................... Ready. Linux version 2.6.21-1.3194.fc7 (kojibuilder@hammer2.fedora.redhat.com) (gcc version 4.1.2 20070502 (Red Hat 4.1.2-12)) #1 SMP Wed May 23 22:47:07 EDT 2007 Command line: initrd=/fedora/7/x86_64/initrd.img ramdisk_size=32768 root=/dev/ram0 devfs=mount,dall rw serial=ttyS0 console=ttyS0,9600 text BOOT_IMAGE=/fedora/7/x86_64/vmlinuz noapic nohpet BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 000000007efc0000 (usable) BIOS-e820: 000000007efc0000 - 000000007efce000 (ACPI data) BIOS-e820: 000000007efce000 - 000000007eff0000 (ACPI NVS) BIOS-e820: 000000007eff0000 - 000000007f000000 (reserved) BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved) BIOS-e820: 00000000fee00000 - 00000000fef00000 (reserved) BIOS-e820: 00000000ff780000 - 0000000100000000 (reserved) end_pfn_map = 1048576 DMI present. ACPI: RSDP 000FB9F0, 0014 (r0 ACPIAM) ACPI: RSDT 7EFC0000, 0040 (r1 _ASUS_ Notebook 1000715 MSFT 97) ACPI: FACP 7EFC0200, 0084 (r2 A_M_I_ OEMFACP 1000715 MSFT 97) ACPI Warning (tbfadt-0360): Ignoring BIOS FADT r2 C-state control [20070126] ACPI: DSDT 7EFC05C0, 4D15 (r1 A0557 A0557000 0 INTL 20060113) ACPI: FACS 7EFCE000, 0040 ACPI: APIC 7EFC0390, 0070 (r1 A_M_I_ OEMAPIC 1000715 MSFT 97) ACPI: MCFG 7EFC0400, 003C (r1 A_M_I_ OEMMCFG 1000715 MSFT 97) ACPI: SLIC 7EFC0440, 0176 (r1 _ASUS_ Notebook 1000715 MSFT 97) ACPI: OEMB 7EFCE040, 0060 (r1 A_M_I_ AMI_OEM 1000715 MSFT 97) ACPI: HPET 7EFC52E0, 0038 (r1 A_M_I_ OEMHPET0 1000715 MSFT 97) ACPI: SSDT 7EFC5320, 01C4 (r1 A_M_I_ POWERNOW 1 AMD 1) Scanning NUMA topology in Northbridge 24 Number of nodes 1 Node 0 MemBase 0000000000000000 Limit 000000007efc0000 Using node hash shift of 63 Bootmem setup node 0 0000000000000000-000000007efc0000 Zone PFN ranges: DMA 0 -> 4096 DMA32 4096 -> 1048576 Normal 1048576 -> 1048576 early_node_map[2] active PFN ranges 0: 0 -> 159 0: 256 -> 520128 ACPI: PM-Timer IO Port: 0x508 ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) Processor #0 (Bootup-CPU) ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled) Processor #1 ACPI: Skipping IOAPIC probe due to 'noapic' option. ACPI: HPET id: 0x10de8201 base: 0xfed00000 Using ACPI for processor (LAPIC) configuration information Intel MultiProcessor Specification v1.4 MPTABLE: OEM ID: TEMPLATE MPTABLE: Product ID: MPTABLE: APIC at: 0xFEE00000 I/O APIC #2 at 0xFEC00000. Setting APIC routing to physical flat Processors: 2 Nosave address range: 000000000009f000 - 00000000000a0000 Nosave address range: 00000000000a0000 - 00000000000e0000 Nosave address range: 00000000000e0000 - 0000000000100000 Allocating PCI resources starting at 80000000 (gap: 7f000000:7fc00000) SMP: Allowing 2 CPUs, 0 hotplug CPUs PERCPU: Allocating 43648 bytes of per cpu data Built 1 zonelists. Total pages: 511641 Kernel command line: initrd=/fedora/7/x86_64/initrd.img ramdisk_size=32768 root=/dev/ram0 devfs=mount,dall rw serial=ttyS0 console=ttyS0,9600 text BOOT_IMAGE=/fedora/7/x86_64/vmlinuz noapic nohpet Initializing CPU#0 PID hash table entries: 4096 (order: 12, 32768 bytes) time.c: Detected 2009.139 MHz processor. Console: colour VGA+ 80x25 Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes) Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes) Checking aperture... CPU 0: aperture @ 60bc000000 size 32 MB Aperture too small (32 MB) No AGP bridge found Memory: 2037428k/2080512k available (2319k kernel code, 42696k reserved, 1375k data, 316k init) Calibrating delay using timer specific routine.. 4020.70 BogoMIPS (lpj=2010350) Security Framework v1.0.0 initialized SELinux: Initializing. selinux_register_security: Registering secondary module capability Capability LSM initialized as secondary Mount-cache hash table entries: 256 CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) CPU: L2 Cache: 512K (64 bytes/line) CPU 0/0 -> Node 0 CPU: Physical Processor ID: 0 CPU: Processor Core ID: 0 SMP alternatives: switching to UP code ACPI: Core revision 20070126 ACPI: setting ELCR to 0200 (from 8c20) Using local APIC timer interrupts. result 12557137 Detected 12.557 MHz APIC timer. SMP alternatives: switching to SMP code Booting processor 1/2 APIC 0x1 Initializing CPU#1 Calibrating delay using timer specific routine.. 4024.19 BogoMIPS (lpj=2012099) CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) CPU: L2 Cache: 512K (64 bytes/line) CPU 1/1 -> Node 0 CPU: Physical Processor ID: 0 CPU: Processor Core ID: 1 AMD Athlon(tm) 64 X2 Dual Core Processor 3800+ stepping 02 Brought up 2 CPUs migration_cost=102 NET: Registered protocol family 16 ACPI: bus type pci registered PCI: Using configuration type 1 ACPI: Interpreter enabled ACPI: (supports S0 S1 S3 S4 S5) ACPI: Using PIC for interrupt routing ACPI: PCI Root Bridge [PCI0] (0000:00) PCI: Transparent bridge - 0000:00:04.0 ACPI: PCI Interrupt Link [LNKA] (IRQs 7 10 *11 14) ACPI: PCI Interrupt Link [LNKB] (IRQs 7 10 11 14) *0, disabled. ACPI: PCI Interrupt Link [LNKC] (IRQs 7 10 11 14) *0, disabled. ACPI: PCI Interrupt Link [LNKD] (IRQs 7 10 11 14) *0, disabled. ACPI: PCI Interrupt Link [LNEA] (IRQs 7 10 11 14) *0, disabled. ACPI: PCI Interrupt Link [LNEB] (IRQs 7 10 11 14) *0, disabled. ACPI: PCI Interrupt Link [LNEC] (IRQs 7 10 11 14) *0, disabled. ACPI: PCI Interrupt Link [LNED] (IRQs 7 10 11 14) *0, disabled. ACPI: PCI Interrupt Link [LUB0] (IRQs 7 10 *11 14) ACPI: PCI Interrupt Link [LUB2] (IRQs 7 10 11 14) *0, disabled. ACPI: PCI Interrupt Link [LMAC] (IRQs 7 *10 11 14) ACPI: PCI Interrupt Link [LAZA] (IRQs 7 10 11 14) *0, disabled. ACPI: PCI Interrupt Link [LACI] (IRQs 7 10 11 14) *0, disabled. ACPI: PCI Interrupt Link [LMC9] (IRQs 7 10 *11 14) ACPI: PCI Interrupt Link [LSMB] (IRQs 7 *10 11 14) ACPI: PCI Interrupt Link [LPMU] (IRQs 7 10 11 14) *0, disabled. ACPI: PCI Interrupt Link [LSA0] (IRQs *15) ACPI: PCI Interrupt Link [LSA1] (IRQs *5) ACPI: PCI Interrupt Link [LATA] (IRQs 7 10 11 14) *0, disabled. Linux Plug and Play Support v0.97 (c) Adam Belay pnp: PnP ACPI init pnp: PnP ACPI: found 15 devices usbcore: registered new interface driver usbfs usbcore: registered new interface driver hub usbcore: registered new device driver usb PCI: Using ACPI for IRQ routing PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report NetLabel: Initializing NetLabel: domain hash size = 128 NetLabel: protocols = UNLABELED CIPSOv4 NetLabel: unlabeled traffic allowed by default pnp: 00:07: iomem range 0xfefe0000-0xfefe01ff has been reserved pnp: 00:07: iomem range 0xfefe1000-0xfefe1fff has been reserved pnp: 00:07: iomem range 0xfee01000-0xfeefffff has been reserved pnp: 00:07: iomem range 0xffb80000-0xffffffff could not be reserved pnp: 00:09: iomem range 0xfec00000-0xfec00fff could not be reserved pnp: 00:09: iomem range 0xfee00000-0xfee00fff could not be reserved pnp: 00:09: iomem range 0x7f000000-0x7fffffff has been reserved pnp: 00:0b: ioport range 0x230-0x23f has been reserved pnp: 00:0b: ioport range 0x290-0x29f has been reserved pnp: 00:0b: ioport range 0xa00-0xa0f has been reserved pnp: 00:0b: ioport range 0xa10-0xa1f has been reserved pnp: 00:0d: iomem range 0xe0000000-0xefffffff has been reserved pnp: 00:0e: iomem range 0x0-0x9ffff could not be reserved pnp: 00:0e: iomem range 0xc0000-0xcffff has been reserved pnp: 00:0e: iomem range 0xe0000-0xfffff could not be reserved pnp: 00:0e: iomem range 0x100000-0x7effffff could not be reserved PCI: Bridge: 0000:00:04.0 Time: acpi_pm clocksource has been installed. IO window: e000-efff MEM window: dff00000-dfffffff PREFETCH window: 80000000-800fffff PCI: Bridge: 0000:00:09.0 IO window: disabled. MEM window: disabled. PREFETCH window: disabled. PCI: Bridge: 0000:00:0b.0 IO window: disabled. MEM window: disabled. PREFETCH window: disabled. PCI: Bridge: 0000:00:0c.0 IO window: disabled. MEM window: disabled. PREFETCH window: disabled. NET: Registered protocol family 2 IP route cache hash table entries: 65536 (order: 7, 524288 bytes) TCP established hash table entries: 131072 (order: 9, 3145728 bytes) TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) TCP: Hash tables configured (established 131072 bind 65536) TCP reno registered checking if image is initramfs... it is Freeing initrd memory: 5563k freed audit: initializing netlink socket (disabled) audit(1181123474.919:1): initialized Total HugeTLB memory allocated, 0 VFS: Disk quotas dquot_6.5.1 Dquot-cache hash table entries: 512 (order 0, 4096 bytes) ksign: Installing public key data Loading keyring - Added public key F2580AE679027173 - User ID: Red Hat, Inc. (Kernel Module GPG key) io scheduler noop registered io scheduler anticipatory registered io scheduler deadline registered io scheduler cfq registered (default) assign_interrupt_mode Found MSI capability assign_interrupt_mode Found MSI capability assign_interrupt_mode Found MSI capability pci_hotplug: PCI Hot Plug PCI Core version: 0.5 Real Time Clock Driver v1.12ac hpet_acpi_add: no address or irqs in _CRS Non-volatile memory driver v1.2 Linux agpgart interface v0.102 (c) Dave Jones Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled ?serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A 00:0c: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A RAMDISK driver initialized: 16 RAM disks of 32768K size 4096 blocksize input: Macintosh mouse button emulation as /class/input/input0 usbcore: registered new interface driver libusual usbcore: registered new interface driver hiddev usbcore: registered new interface driver usbhid drivers/usb/input/hid-core.c: v2.6:USB HID core driver PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1 PNP: PS/2 controller doesn't have AUX irq; using default 12 serio: i8042 KBD port at 0x60,0x64 irq 1 serio: i8042 AUX port at 0x60,0x64 irq 12 mice: PS/2 mouse device common for all mice input: AT Translated Set 2 keyboard as /class/input/input1 TCP bic registered Initializing XFRM netlink socket NET: Registered protocol family 1 NET: Registered protocol family 17 powernow-k8: Found 2 AMD Athlon(tm) 64 X2 Dual Core Processor 3800+ processors (version 2.00.00) powernow-k8: 0 : fid 0xc (2000 MHz), vid 0xe powernow-k8: 1 : fid 0xa (1800 MHz), vid 0x10 powernow-k8: 2 : fid 0x2 (1000 MHz), vid 0x12 drivers/rtc/hctosys.c: unable to open rtc device (rtc0) Freeing unused kernel memory: 316k freed Write protecting the kernel read-only data: 1032k Greetings. anaconda installer init version 11.2.0.66 starting mounting /proc filesystem... done creating /dev filesystem... done mounting /dev/pts (unix98 pty) filesystem... done mounting /sys filesystem... done BUG: soft lockup detected on CPU#1! Call Trace: [] softlockup_tick+0xd5/0xe7 [] update_process_times+0x42/0x68 [] smp_local_timer_interrupt+0x34/0x55 [] smp_apic_timer_interrupt+0x43/0x5b [] apic_timer_interrupt+0x66/0x70 [] do_page_fault+0x31d/0x7b5 [] do_page_fault+0x2ff/0x7b5 [] error_exit+0x0/0x84 [] __clear_user+0x3f/0x61 [] padzero+0x1b/0x2b [] load_elf_binary+0x9fd/0x17e7 [] search_binary_handler+0xbb/0x219 [] do_execve+0x18c/0x242 [] __call_usermodehelper+0x0/0x5b [] sys_execve+0x36/0x4c [] kernel_execve+0x64/0xd0 [] __call_usermodehelper+0x0/0x5b [] physflat_send_IPI_mask+0x0/0x6a [] ____call_usermodehelper+0x166/0x174 [] child_rip+0xa/0x12 [] __call_usermodehelper+0x0/0x5b [] physflat_send_IPI_mask+0x0/0x6a [] ____call_usermodehelper+0x0/0x174 [] child_rip+0x0/0x12 Call Trace: [] softlockup_tick+0xd5/0xe7 [] update_process_times+0x42/0x68 [] smp_local_timer_interrupt+0x34/0x55 [] smp_apic_timer_interrupt+0x43/0x5b [] apic_timer_interrupt+0x66/0x70 [] do_page_fault+0x31d/0x7b5 [] do_page_fault+0x2ff/0x7b5 [] error_exit+0x0/0x84 [] __clear_user+0x3f/0x61 [] padzero+0x1b/0x2b [] load_elf_binary+0x9fd/0x17e7 [] search_binary_handler+0xbb/0x219 [] do_execve+0x18c/0x242 [] __call_usermodehelper+0x0/0x5b [] sys_execve+0x36/0x4c [] kernel_execve+0x64/0xd0 [] __call_usermodehelper+0x0/0x5b [] physflat_send_IPI_mask+0x0/0x6a [] ____call_usermodehelper+0x166/0x174 [] child_rip+0xa/0x12 [] __call_usermodehelper+0x0/0x5b [] physflat_send_IPI_mask+0x0/0x6a [] ____call_usermodehelper+0x0/0x174 [] child_rip+0x0/0x12