[17179569.184000] Linux version 2.6.17-10-generic (root@vernadsky) (gcc version 4.1.2 20060928 (prerelease) (Ubuntu 4.1.1-13ubuntu5)) #2 SMP Fri Oct 13 18:45:35 UTC 2006 (Ubuntu 2.6.17-10.33-generic) [17179569.184000] BIOS-provided physical RAM map: [17179569.184000] BIOS-e820: 0000000000000000 - 000000000009f800 (usable) [17179569.184000] BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved) [17179569.184000] BIOS-e820: 00000000000eac00 - 0000000000100000 (reserved) [17179569.184000] BIOS-e820: 0000000000100000 - 000000000fff0000 (usable) [17179569.184000] BIOS-e820: 000000000fff0000 - 000000000ffffc00 (ACPI data) [17179569.184000] BIOS-e820: 000000000ffffc00 - 0000000010000000 (ACPI NVS) [17179569.184000] BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved) [17179569.184000] 0MB HIGHMEM available. [17179569.184000] 255MB LOWMEM available. [17179569.184000] On node 0 totalpages: 65520 [17179569.184000] DMA zone: 4096 pages, LIFO batch:0 [17179569.184000] Normal zone: 61424 pages, LIFO batch:15 [17179569.184000] DMI 2.2 present. [17179569.184000] ACPI: RSDP (v000 PTLTD ) @ 0x000f6a90 [17179569.184000] ACPI: RSDT (v001 PTLTD RSDT 0x06040000 LTP 0x00000000) @ 0x0fffced4 [17179569.184000] ACPI: FADT (v001 COMPAL N32NC 0x06040000 PTL 0x00000001) @ 0x0ffffb65 [17179569.184000] ACPI: BOOT (v001 PTLTD $SBFTBL$ 0x06040000 LTP 0x00000001) @ 0x0ffffbd9 [17179569.184000] ACPI: DSDT (v001 Compal 32NC 0x06040000 MSFT 0x0100000b) @ 0x00000000 [17179569.184000] ACPI: BIOS age (1992) fails cutoff (2000), acpi=force is required to enable ACPI [17179569.184000] ACPI: Disabling ACPI support [17179569.184000] Allocating PCI resources starting at 20000000 (gap: 10000000:eff80000) [17179569.184000] Built 1 zonelists [17179569.184000] Kernel command line: root=/dev/hda1 ro quiet splash pci=assign-busses [17179569.184000] Local APIC disabled by BIOS (or by default) -- you can enable it with "lapic" [17179569.184000] mapped APIC to ffffd000 (0120a000) [17179569.184000] Enabling fast FPU save and restore... done. [17179569.184000] Enabling unmasked SIMD FPU exception support... done. [17179569.184000] Initializing CPU#0 [17179569.184000] PID hash table entries: 1024 (order: 10, 4096 bytes) [ 0.000000] Detected 597.513 MHz processor. [ 15.004945] Using tsc for high-res timesource [ 15.006591] Console: colour VGA+ 80x25 [ 15.007128] Dentry cache hash table entries: 32768 (order: 5, 131072 bytes) [ 15.007671] Inode-cache hash table entries: 16384 (order: 4, 65536 bytes) [ 15.036538] Memory: 249960k/262080k available (1910k kernel code, 11556k reserved, 1070k data, 308k init, 0k highmem) [ 15.036552] Checking if this processor honours the WP bit even in supervisor mode... Ok. [ 15.116775] Calibrating delay using timer specific routine.. 1196.64 BogoMIPS (lpj=2393299) [ 15.116895] Security Framework v1.0.0 initialized [ 15.116914] SELinux: Disabled at boot. [ 15.116963] Mount-cache hash table entries: 512 [ 15.117323] CPU: After generic identify, caps: 0387f9ff 00000000 00000000 00000000 00000000 00000000 00000000 [ 15.117346] CPU: After vendor identify, caps: 0387f9ff 00000000 00000000 00000000 00000000 00000000 00000000 [ 15.117376] CPU: L1 I cache: 16K, L1 D cache: 16K [ 15.117385] CPU: L2 cache: 256K [ 15.117393] CPU serial number disabled. [ 15.117401] CPU: After all inits, caps: 0383f9ff 00000000 00000000 00000040 00000000 00000000 00000000 [ 15.117456] Checking 'hlt' instruction... OK. [ 15.132949] SMP alternatives: switching to UP code [ 15.133224] Freeing SMP alternatives: 16k freed [ 15.133604] checking if image is initramfs... it is [ 16.751699] Freeing initrd memory: 5523k freed [ 16.751720] CPU0: Intel Pentium III (Coppermine) stepping 06 [ 16.751737] SMP motherboard not detected. [ 16.751746] Local APIC not detected. Using dummy APIC emulation. [ 16.751994] Brought up 1 CPUs [ 16.752049] migration_cost=0 [ 16.752977] NET: Registered protocol family 16 [ 16.753067] EISA bus registered [ 16.764489] PCI: PCI BIOS revision 2.10 entry at 0xfd9be, last bus=1 [ 16.764508] PCI: Using configuration type 1 [ 16.764515] Setting up standard PCI resources [ 16.768294] ACPI: Interpreter disabled. [ 16.768307] Linux Plug and Play Support v0.97 (c) Adam Belay [ 16.768330] pnp: PnP ACPI: disabled [ 16.768343] PnPBIOS: Scanning system for PnP BIOS support... [ 16.768395] PnPBIOS: Found PnP BIOS installation structure at 0xc00f6b00 [ 16.768406] PnPBIOS: PnP BIOS version 1.0, entry 0xf0000:0x9d79, dseg 0x400 [ 16.774776] PnPBIOS: 17 nodes reported by PnP BIOS; 17 recorded by driver [ 16.774922] PCI: Probing PCI hardware [ 16.774934] PCI: Probing PCI hardware (bus 00) [ 16.775368] PCI: Ignoring BAR0-3 of IDE controller 0000:00:07.1 [ 16.775500] PCI quirk: region 1000-103f claimed by PIIX4 ACPI [ 16.775511] PCI quirk: region 1040-104f claimed by PIIX4 SMB [ 16.775526] PIIX4 devres E PIO at 0378-037f [ 16.775536] PIIX4 devres G PIO at 002e-002f [ 16.776015] Boot video device is 0000:01:01.0 [ 16.777711] PCI: Using IRQ router PIIX/ICH [8086/7110] at 0000:00:07.0 [ 16.777741] PCI: Found IRQ 11 for device 0000:00:04.0 [ 16.777754] PCI: Sharing IRQ 11 with 0000:00:04.1 [ 16.777773] PCI: Sharing IRQ 11 with 0000:01:01.0 [ 16.780143] pnp: 00:0a: ioport range 0x4d0-0x4d1 has been reserved [ 16.780154] pnp: 00:0a: ioport range 0x1000-0x103f has been reserved [ 16.780165] pnp: 00:0a: ioport range 0x1040-0x104f has been reserved [ 16.780856] PCI: Bridge: 0000:00:01.0 [ 16.780864] IO window: disabled. [ 16.780875] MEM window: f0000000-f7ffffff [ 16.780885] PREFETCH window: 28000000-280fffff [ 16.780896] PCI: Bus 2, cardbus bridge: 0000:00:04.0 [ 16.780905] IO window: 00001c00-00001cff [ 16.780914] IO window: 00002000-000020ff [ 16.780924] PREFETCH window: 20000000-21ffffff [ 16.780934] MEM window: 22000000-23ffffff [ 16.780944] PCI: Bus 6, cardbus bridge: 0000:00:04.1 [ 16.780951] IO window: 00002400-000024ff [ 16.780961] IO window: 00002800-000028ff [ 16.780971] PREFETCH window: 24000000-25ffffff [ 16.780981] MEM window: 26000000-27ffffff [ 16.781018] PCI: Found IRQ 11 for device 0000:00:04.0 [ 16.781032] PCI: Sharing IRQ 11 with 0000:00:04.1 [ 16.781050] PCI: Sharing IRQ 11 with 0000:01:01.0 [ 16.781061] PCI: Setting latency timer of device 0000:00:04.0 to 64 [ 16.781084] PCI: Found IRQ 11 for device 0000:00:04.1 [ 16.781096] PCI: Sharing IRQ 11 with 0000:00:04.0 [ 16.781115] PCI: Sharing IRQ 11 with 0000:01:01.0 [ 16.781125] PCI: Setting latency timer of device 0000:00:04.1 to 64 [ 16.781200] NET: Registered protocol family 2 [ 16.820007] IP route cache hash table entries: 2048 (order: 1, 8192 bytes) [ 16.820291] TCP established hash table entries: 8192 (order: 4, 65536 bytes) [ 16.820522] TCP bind hash table entries: 4096 (order: 3, 32768 bytes) [ 16.820642] TCP: Hash tables configured (established 8192 bind 4096) [ 16.820652] TCP reno registered [ 16.821136] Simple Boot Flag at 0x38 set to 0x1 [ 16.822693] audit: initializing netlink socket (disabled) [ 16.822730] audit(1181514179.004:1): initialized [ 16.823156] VFS: Disk quotas dquot_6.5.1 [ 16.823225] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 16.823387] Initializing Cryptographic API [ 16.823402] io scheduler noop registered [ 16.823423] io scheduler anticipatory registered [ 16.823448] io scheduler deadline registered [ 16.823491] io scheduler cfq registered (default) [ 16.823507] Limiting direct PCI/PCI transfers. [ 16.824143] isapnp: Scanning for PnP cards... [ 17.178506] isapnp: No Plug & Play device found [ 17.256843] Real Time Clock Driver v1.12ac [ 17.257051] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled [ 17.257281] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 17.259149] 00:0d: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 17.259972] mice: PS/2 mouse device common for all mice [ 17.261712] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize [ 17.262349] Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 [ 17.262362] ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx [ 17.262855] PNP: PS/2 Controller [PNP0303,PNP0f13] at 0x60,0x64 irq 1,12 [ 17.274991] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 17.276046] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 17.277824] EISA: Probing bus 0 at eisa.0 [ 17.277848] Cannot allocate resource for EISA slot 1 [ 17.277858] Cannot allocate resource for EISA slot 2 [ 17.277902] EISA: Detected 0 cards. [ 17.278599] TCP bic registered [ 17.278629] NET: Registered protocol family 1 [ 17.278649] NET: Registered protocol family 8 [ 17.278656] NET: Registered protocol family 20 [ 17.278721] Using IPI No-Shortcut mode [ 17.279984] Freeing unused kernel memory: 308k freed [ 17.316753] input: AT Translated Set 2 keyboard as /class/input/input0 [ 18.583138] Capability LSM initialized [ 19.957194] PIIX4: IDE controller at PCI slot 0000:00:07.1 [ 19.957228] PIIX4: chipset revision 1 [ 19.957235] PIIX4: not 100% native mode: will probe irqs later [ 19.957255] ide0: BM-DMA at 0x1050-0x1057, BIOS settings: hda:DMA, hdb:pio [ 19.957283] ide1: BM-DMA at 0x1058-0x105f, BIOS settings: hdc:DMA, hdd:pio [ 19.957303] Probing IDE interface ide0... [ 20.245966] hda: FUJITSU MHT2040AT, ATA DISK drive [ 20.918804] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 [ 20.919363] Probing IDE interface ide1... [ 21.653150] hdc: TOSHIBA DVD-ROM SD-C2402, ATAPI CD/DVD-ROM drive [ 22.335652] ide1 at 0x170-0x177,0x376 on irq 15 [ 22.355775] hda: max request size: 128KiB [ 22.391899] hda: 78140160 sectors (40007 MB) w/2048KiB Cache, CHS=65535/16/63, UDMA(33) [ 22.393664] hda: cache flushes supported [ 22.393783] hda: hda1 hda2 < hda5 > [ 22.486958] hdc: ATAPI 24X DVD-ROM drive, 128kB Cache, UDMA(33) [ 22.486983] Uniform CD-ROM driver Revision: 3.20 [ 22.904876] usbcore: registered new driver usbfs [ 22.904944] usbcore: registered new driver hub [ 22.909153] USB Universal Host Controller Interface driver v3.0 [ 22.909264] PCI: Found IRQ 5 for device 0000:00:07.2 [ 22.909312] uhci_hcd 0000:00:07.2: UHCI Host Controller [ 22.909588] uhci_hcd 0000:00:07.2: new USB bus registered, assigned bus number 1 [ 22.909634] uhci_hcd 0000:00:07.2: irq 5, io base 0x00001060 [ 22.909876] usb usb1: configuration #1 chosen from 1 choice [ 22.909949] hub 1-0:1.0: USB hub found [ 22.909973] hub 1-0:1.0: 2 ports detected [ 23.114498] Attempting manual resume [ 23.155072] EXT3-fs: INFO: recovery required on readonly filesystem. [ 23.155086] EXT3-fs: write access will be enabled during recovery. [ 25.490290] kjournald starting. Commit interval 5 seconds [ 25.490337] EXT3-fs: recovery complete. [ 25.491352] EXT3-fs: mounted filesystem with ordered data mode. [ 41.131763] Linux agpgart interface v0.101 (c) Dave Jones [ 41.194275] agpgart: Detected an Intel 440BX Chipset. [ 41.198936] agpgart: AGP aperture is 64M @ 0xf8000000 [ 41.241215] input: PC Speaker as /class/input/input1 [ 41.686721] piix4_smbus 0000:00:07.3: Found 0000:00:07.3 device [ 41.703867] PCI: Found IRQ 11 for device 0000:00:04.0 [ 41.703888] PCI: Sharing IRQ 11 with 0000:00:04.1 [ 41.703909] PCI: Sharing IRQ 11 with 0000:01:01.0 [ 41.703929] Yenta: CardBus bridge found at 0000:00:04.0 [103c:0014] [ 41.703951] Yenta: Enabling burst memory read transactions [ 41.703961] Yenta: Using CSCINT to route CSC interrupts to PCI [ 41.703968] Yenta: Routing CardBus interrupts to PCI [ 41.703979] Yenta TI: socket 0000:00:04.0, mfunc 0x01ac1b22, devctl 0x66 [ 41.934057] Yenta: ISA IRQ mask 0x0698, PCI irq 11 [ 41.934069] Socket status: 30000006 [ 41.946674] PCI: Found IRQ 11 for device 0000:00:04.1 [ 41.946692] PCI: Sharing IRQ 11 with 0000:00:04.0 [ 41.946714] PCI: Sharing IRQ 11 with 0000:01:01.0 [ 41.946738] Yenta: CardBus bridge found at 0000:00:04.1 [103c:0014] [ 41.946762] Yenta: Using CSCINT to route CSC interrupts to PCI [ 41.946770] Yenta: Routing CardBus interrupts to PCI [ 41.946781] Yenta TI: socket 0000:00:04.1, mfunc 0x01ac1b22, devctl 0x66 [ 42.177916] Yenta: ISA IRQ mask 0x0698, PCI irq 11 [ 42.177928] Socket status: 30000006 [ 42.733808] PCI: Found IRQ 5 for device 0000:00:08.0 [ 42.733839] PCI: Sharing IRQ 5 with 0000:00:08.1 [ 43.222058] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 43.428848] Floppy drive(s): fd0 is 1.44M [ 43.448289] FDC 0 is a post-1991 82077 [ 43.586389] parport: PnPBIOS parport detected. [ 43.586460] parport0: PC-style at 0x378 (0x778), irq 7, dma 3 [PCSPP,TRISTATE,COMPAT,ECP,DMA] [ 43.725582] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 44.044291] Synaptics Touchpad, model: 1, fw: 5.1, id: 0x8f40b1, caps: 0x80471b/0x0 [ 44.108629] input: SynPS/2 Synaptics TouchPad as /class/input/input2 [ 44.314669] ts: Compaq touchscreen protocol output [ 45.584192] cs: IO port probe 0x100-0x3af: excluding 0x200-0x207 [ 45.586266] cs: IO port probe 0x3e0-0x4ff: clean. [ 45.587154] cs: IO port probe 0x820-0x8ff: clean. [ 45.587946] cs: IO port probe 0xc00-0xcf7: clean. [ 45.588992] cs: IO port probe 0xa00-0xaff: clean. [ 45.591122] cs: IO port probe 0x100-0x3af: excluding 0x200-0x207 [ 45.593232] cs: IO port probe 0x3e0-0x4ff: clean. [ 45.594119] cs: IO port probe 0x820-0x8ff: clean. [ 45.594882] cs: IO port probe 0xc00-0xcf7: clean. [ 45.595959] cs: IO port probe 0xa00-0xaff: clean. [ 45.828259] lp0: using parport0 (interrupt-driven). [ 45.909784] Adding 746980k swap on /dev/disk/by-uuid/1992423c-9b17-427e-9cc3-85f8f43c1549. Priority:-1 extents:1 across:746980k [ 46.019445] EXT3 FS on hda1, internal journal [ 47.997926] NET: Registered protocol family 17 [ 60.779842] apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac) [ 78.768299] Bluetooth: Core ver 2.8 [ 78.768317] NET: Registered protocol family 31 [ 78.768323] Bluetooth: HCI device and connection manager initialized [ 78.768361] Bluetooth: HCI socket layer initialized [ 78.883047] Bluetooth: L2CAP ver 2.8 [ 78.883062] Bluetooth: L2CAP socket layer initialized [ 78.947337] Bluetooth: RFCOMM socket layer initialized [ 78.947379] Bluetooth: RFCOMM TTY layer initialized [ 78.947387] Bluetooth: RFCOMM ver 1.7 [ 128.207668] pccard: CardBus card inserted into slot 1 [ 128.888492] Linux Tulip driver version 1.1.14 (May 6, 2006) [ 128.889819] PCI: Enabling device 0000:06:00.0 (0000 -> 0003) [ 128.890121] PCI: Setting latency timer of device 0000:06:00.0 to 64 [ 128.890853] tulip0: MII transceiver #1 config 3100 status 7849 advertising 05e1. [ 128.900110] eth0: ADMtek Comet rev 17 at Port 0x2400, 00:18:4D:6E:DF:B4, IRQ 11. [ 133.242612] 0000:06:00.0: tulip_stop_rxtx() failed (CSR5 0xfc664010 CSR6 0xff972113) [ 133.242641] eth1: Setting full-duplex based on MII#1 link partner capability of 45e1. [ 150.779558] NET: Registered protocol family 10 [ 150.779864] lo: Disabled Privacy Extensions [ 150.780300] IPv6 over IPv4 tunneling driver [ 161.180616] eth1: no IPv6 routers present [ 163.446701] 0000:06:00.0: tulip_stop_rxtx() failed (CSR5 0xffffffff CSR6 0xffffffff) [ 163.448135] 0000:06:00.0: tulip_stop_rxtx() failed (CSR5 0xffffffff CSR6 0xffffffff) [ 163.448164] pccard: card ejected from slot 1 [ 163.455818] 0000:06:00.0: tulip_stop_rxtx() failed (CSR5 0xffffffff CSR6 0xffffffff) [ 163.457763] 0000:06:00.0: tulip_stop_rxtx() failed (CSR5 0xffffffff CSR6 0xffffffff) [ 163.484884] 0000:06:00.0: tulip_stop_rxtx() failed (CSR5 0xffffffff CSR6 0xffffffff) [ 176.287954] pccard: CardBus card inserted into slot 1 [ 176.289236] PCI: Enabling device 0000:06:00.0 (0000 -> 0003) [ 176.289292] PCI: Setting latency timer of device 0000:06:00.0 to 64 [ 176.289998] tulip1: MII transceiver #1 config 3100 status 7849 advertising 05e1. [ 176.297990] eth0: ADMtek Comet rev 17 at Port 0x2400, 00:18:4D:6E:DF:B4, IRQ 11. [ 180.331494] 0000:06:00.0: tulip_stop_rxtx() failed (CSR5 0xfc664010 CSR6 0xff972113) [ 180.331521] eth1: Setting full-duplex based on MII#1 link partner capability of 45e1. [ 188.109113] eth1: no IPv6 routers present