[root@asterisk1 etc]# ztcfg -vvvv Zaptel Configuration ====================== Channel map: 0 channels configured. [root@asterisk1 etc]# cat /etc/zaptel.conf # Autogenerated by /usr/local/sbin/genzaptelconf -- do not hand edit # Zaptel Configuration File # # This file is parsed by the Zaptel Configurator, ztcfg # # It must be in the module loading order # Span 1: ZTDUMMY/1 "ZTDUMMY/1 1" # Global data loadzone = us defaultzone = us [root@asterisk1 ~]# dmesg Linux version 2.6.9-34.0.2.EL (buildcentos@v20z-i386) (gcc version 3.4.5 20051201 (Red Hat 3.4.5-2)) #1 Fri Jul 7 19:24:57 CDT 2006 BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 000000001f740000 (usable) BIOS-e820: 000000001f740000 - 000000001f750000 (ACPI data) BIOS-e820: 000000001f750000 - 000000001f800000 (ACPI NVS) 0MB HIGHMEM available. 503MB LOWMEM available. Using x86 segment limits to approximate NX protection zapping low mappings. On node 0 totalpages: 128832 DMA zone: 4096 pages, LIFO batch:1 Normal zone: 124736 pages, LIFO batch:16 HighMem zone: 0 pages, LIFO batch:1 DMI 2.3 present. ACPI: RSDP (v000 ACPIAM ) @ 0x000f7170 ACPI: RSDT (v001 INTEL D845GRG 0x20030226 MSFT 0x00000097) @ 0x1f740000 ACPI: FADT (v002 INTEL D845GRG 0x20030226 MSFT 0x00000097) @ 0x1f740200 ACPI: MADT (v001 INTEL D845GRG 0x20030226 MSFT 0x00000097) @ 0x1f740300 ACPI: ASF! (v016 AMIASF I845GASF 0x00000001 MSFT 0x0100000d) @ 0x1f744350 ACPI: DSDT (v001 INTEL D845GRG 0x0000010a MSFT 0x0100000d) @ 0x00000000 Built 1 zonelists Kernel command line: ro root=LABEL=/1 acpi=off noapic Initializing CPU#0 CPU 0 irqstacks, hard=c03e7000 soft=c03e6000 PID hash table entries: 2048 (order: 11, 32768 bytes) Detected 2800.295 MHz processor. Using tsc for high-res timesource Console: colour VGA+ 80x25 Dentry cache hash table entries: 65536 (order: 6, 262144 bytes) Inode-cache hash table entries: 32768 (order: 5, 131072 bytes) Memory: 506424k/515328k available (2118k kernel code, 8252k reserved, 668k data, 144k init, 0k highmem) Calibrating delay using timer specific routine.. 5605.55 BogoMIPS (lpj=2802776) Security Scaffold v1.0.0 initialized SELinux: Initializing. SELinux: Starting in permissive mode There is already a security framework initialized, register_security failed. selinux_register_security: Registering secondary module capability Capability LSM initialized as secondary Mount-cache hash table entries: 512 (order: 0, 4096 bytes) CPU: After generic identify, caps: bfebfbff 00000000 00000000 00000000 CPU: After vendor identify, caps: bfebfbff 00000000 00000000 00000000 CPU: Trace cache: 12K uops, L1 D cache: 8K CPU: L2 cache: 512K CPU: After all inits, caps: bfebf3ff 00000000 00000000 00000080 Intel machine check architecture supported. Intel machine check reporting enabled on CPU#0. CPU0: Intel P4/Xeon Extended MCE MSRs (12) available CPU: Intel(R) Pentium(R) 4 CPU 2.80GHz stepping 09 Enabling fast FPU save and restore... done. Enabling unmasked SIMD FPU exception support... done. Checking 'hlt' instruction... OK. checking if image is initramfs... it is Freeing initrd memory: 389k freed NET: Registered protocol family 16 PCI: PCI BIOS revision 2.10 entry at 0xf0031, last bus=1 PCI: Using configuration type 1 mtrr: v2.0 (20020519) ACPI: Subsystem revision 20040816 ACPI: Interpreter disabled. Linux Plug and Play Support v0.97 (c) Adam Belay usbcore: registered new driver usbfs usbcore: registered new driver hub PCI: Probing PCI hardware PCI: Probing PCI hardware (bus 00) PCI: Ignoring BAR0-3 of IDE controller 0000:00:1f.1 PCI: Transparent bridge - 0000:00:1e.0 PCI: Using IRQ router PIIX/ICH [8086/24c0] at 0000:00:1f.0 PCI: IRQ 0 for device 0000:00:1f.1 doesn't match PIRQ mask - try pci=usepirqmask PCI: Found IRQ 9 for device 0000:00:1f.1 PCI: Sharing IRQ 9 with 0000:00:1d.2 apm: BIOS not found. audit: initializing netlink socket (disabled) audit(1181442177.484:1): initialized Total HugeTLB memory allocated, 0 VFS: Disk quotas dquot_6.5.1 Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) SELinux: Registering netfilter hooks Initializing Cryptographic API ksign: Installing public key data Loading keyring - Added public key 1D846148DE22BD48 - User ID: CentOS (Kernel Module GPG key) pci_hotplug: PCI Hot Plug PCI Core version: 0.5 Real Time Clock Driver v1.12 Linux agpgart interface v0.100 (c) Dave Jones agpgart: Detected an Intel 845G Chipset. agpgart: Maximum main memory to use for agp memory: 431M agpgart: Detected 8060K stolen memory. agpgart: AGP aperture is 128M @ 0xf0000000 serio: i8042 AUX port at 0x60,0x64 irq 12 serio: i8042 KBD port at 0x60,0x64 irq 1 Serial: 8250/16550 driver $Revision: 1.90 $ 8 ports, IRQ sharing enabled ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A RAMDISK driver initialized: 16 RAM disks of 16384K size 1024 blocksize divert: not allocating divert_blk for non-ethernet device lo Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx ICH4: IDE controller at PCI slot 0000:00:1f.1 PCI: Enabling device 0000:00:1f.1 (0005 -> 0007) PCI: Found IRQ 9 for device 0000:00:1f.1 PCI: Sharing IRQ 9 with 0000:00:1d.2 ICH4: chipset revision 1 ICH4: not 100% native mode: will probe irqs later ide0: BM-DMA at 0xffa0-0xffa7, BIOS settings: hda:DMA, hdb:pio Probing IDE interface ide0... hda: Maxtor 6E040L0, ATA DISK drive Using cfq io scheduler ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 Probing IDE interface ide1... Probing IDE interface ide2... Probing IDE interface ide3... Probing IDE interface ide4... Probing IDE interface ide5... hda: max request size: 128KiB hda: 80293248 sectors (41110 MB) w/2048KiB Cache, CHS=65535/16/63, UDMA(100) hda: cache flushes supported hda: hda1 hda2 hda3 ide-floppy driver 0.99.newide usbcore: registered new driver hiddev usbcore: registered new driver usbhid drivers/usb/input/hid-core.c: v2.0:USB HID core driver mice: PS/2 mouse device common for all mice input: AT Translated Set 2 keyboard on isa0060/serio0 input: ImPS/2 Logitech Wheel Mouse on isa0060/serio1 md: md driver 0.90.0 MAX_MD_DEVS=256, MD_SB_DISKS=27 NET: Registered protocol family 2 IP: routing cache hash table of 1024 buckets, 32Kbytes TCP: Hash tables configured (established 32768 bind 9362) Initializing IPsec netlink socket NET: Registered protocol family 1 NET: Registered protocol family 17 Freeing unused kernel memory: 144k freed kjournald starting. Commit interval 5 seconds EXT3-fs: mounted filesystem with ordered data mode. SELinux: Disabled at runtime. SELinux: Unregistering netfilter hooks inserting floppy driver for 2.6.9-34.0.2.EL floppy0: no floppy controllers found e100: Intel(R) PRO/100 Network Driver, 3.4.8-k2-NAPI e100: Copyright(c) 1999-2005 Intel Corporation PCI: Found IRQ 11 for device 0000:01:08.0 divert: allocating divert_blk for eth0 e100: eth0: e100_probe: addr 0xff8fe000, irq 11, MAC addr 00:03:47:27:93:E3 hw_random hardware driver 1.0.0 loaded PCI: Found IRQ 10 for device 0000:00:1d.7 ehci_hcd 0000:00:1d.7: EHCI Host Controller PCI: Setting latency timer of device 0000:00:1d.7 to 64 ehci_hcd 0000:00:1d.7: irq 10, pci mem e001cc00 ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1 PCI: cache line size of 128 is not supported by device 0000:00:1d.7 ehci_hcd 0000:00:1d.7: USB 2.0 enabled, EHCI 1.00, driver 2004-May-10 hub 1-0:1.0: USB hub found hub 1-0:1.0: 6 ports detected USB Universal Host Controller Interface driver v2.2 PCI: Found IRQ 11 for device 0000:00:1d.0 PCI: Sharing IRQ 11 with 0000:00:02.0 uhci_hcd 0000:00:1d.0: UHCI Host Controller PCI: Setting latency timer of device 0000:00:1d.0 to 64 uhci_hcd 0000:00:1d.0: irq 11, io base 0000e800 uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2 hub 2-0:1.0: USB hub found hub 2-0:1.0: 2 ports detected PCI: Found IRQ 5 for device 0000:00:1d.1 uhci_hcd 0000:00:1d.1: UHCI Host Controller PCI: Setting latency timer of device 0000:00:1d.1 to 64 uhci_hcd 0000:00:1d.1: irq 5, io base 0000e880 uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3 hub 3-0:1.0: USB hub found hub 3-0:1.0: 2 ports detected PCI: Found IRQ 9 for device 0000:00:1d.2 PCI: Sharing IRQ 9 with 0000:00:1f.1 uhci_hcd 0000:00:1d.2: UHCI Host Controller PCI: Setting latency timer of device 0000:00:1d.2 to 64 uhci_hcd 0000:00:1d.2: irq 9, io base 0000ec00 uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4 hub 4-0:1.0: USB hub found hub 4-0:1.0: 2 ports detected md: Autodetecting RAID arrays. md: autorun ... md: ... autorun DONE. EXT3 FS on hda2, internal journal device-mapper: 4.5.0-ioctl (2005-10-04) initialised: dm-devel@redhat.com kjournald starting. Commit interval 5 seconds EXT3 FS on hda1, internal journal EXT3-fs: mounted filesystem with ordered data mode. Adding 779144k swap on /dev/hda3. Priority:-1 extents:1 IA-32 Microcode Update Driver: v1.14 microcode: CPU0 updated from revision 0x0 to 0x2e, date = 08112004 IA-32 Microcode Update Driver v1.14 unregistered Zapata Telephony Interface Registered on major 196 Zaptel Version: Echo Canceller: KB1 Registered Tormenta2 PCI PCI: Found IRQ 7 for device 0000:01:01.0 Freshmaker version: 71 Freshmaker passed register test Timeout waiting for calibration of module 0 Timeout waiting for calibration of module 0 Proslic Failed on Second Attempt to Auto Calibrate Proslic Failed on Second Attempt to Calibrate Manually. (Try -DNO_CALIBRATION in Makefile) Module 0: FAILED FXS (FCC) Module 1: Not installed Module 2: Not installed Module 3: Not installed wctdm: probe of 0000:01:01.0 failed with error -5 Registered tone zone 0 (United States / North America) ip_tables: (C) 2000-2002 Netfilter core team ip_tables: (C) 2000-2002 Netfilter core team e100: eth0: e100_watchdog: link up, 100Mbps, full-duplex i2c /dev entries driver NET: Registered protocol family 10 Disabled Privacy Extensions on device c0378f60(lo) IPv6 over IPv4 tunneling driver divert: not allocating divert_blk for non-ethernet device sit0 eth0: no IPv6 routers present Registered tone zone 0 (United States / North America) Unregistered Tormenta2 Zapata Telephony Interface Unloaded Zapata Telephony Interface Registered on major 196 Zaptel Version: Echo Canceller: KB1 Registered Tormenta2 PCI PCI: Found IRQ 7 for device 0000:01:01.0 Freshmaker version: 71 Freshmaker passed register test Timeout waiting for calibration of module 0 Timeout waiting for calibration of module 0 Proslic Failed on Second Attempt to Auto Calibrate Proslic Failed on Second Attempt to Calibrate Manually. (Try -DNO_CALIBRATION in Makefile) Module 0: FAILED FXS (FCC) Module 1: Not installed Module 2: Not installed Module 3: Not installed wctdm: probe of 0000:01:01.0 failed with error -5 Registered tone zone 0 (United States / North America) Registered tone zone 0 (United States / North America) Unregistered Tormenta2 Zapata Telephony Interface Unloaded Zapata Telephony Interface Registered on major 196 Zaptel Version: Echo Canceller: KB1 Registered Tormenta2 PCI PCI: Found IRQ 7 for device 0000:01:01.0 Freshmaker version: 71 Freshmaker passed register test Timeout waiting for calibration of module 0 Timeout waiting for calibration of module 0 Proslic Failed on Second Attempt to Auto Calibrate Proslic Failed on Second Attempt to Calibrate Manually. (Try -DNO_CALIBRATION in Makefile) Module 0: FAILED FXS (FCC) Module 1: Not installed Module 2: Not installed Module 3: Not installed wctdm: probe of 0000:01:01.0 failed with error -5 Registered tone zone 0 (United States / North America) Registered tone zone 0 (United States / North America) Unregistered Tormenta2 Zapata Telephony Interface Unloaded Zapata Telephony Interface Registered on major 196 Zaptel Version: Echo Canceller: KB1 Registered Tormenta2 PCI PCI: Found IRQ 7 for device 0000:01:01.0 Freshmaker version: 71 Freshmaker passed register test Timeout waiting for calibration of module 0 Timeout waiting for calibration of module 0 Proslic Failed on Second Attempt to Auto Calibrate Proslic Failed on Second Attempt to Calibrate Manually. (Try -DNO_CALIBRATION in Makefile) Module 0: FAILED FXS (FCC) Module 1: Not installed Module 2: Not installed Module 3: Not installed wctdm: probe of 0000:01:01.0 failed with error -5 Registered tone zone 0 (United States / North America) Registered tone zone 0 (United States / North America)