Linux version 2.4.29 (root@midas) (gcc version 3.3.4) #19 Thu Jan 20 17:06:41 PST 2005
BIOS-provided physical RAM map:
 BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
 BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
 BIOS-e820: 00000000000e2000 - 0000000000100000 (reserved)
 BIOS-e820: 0000000000100000 - 000000003ffe0000 (usable)
 BIOS-e820: 000000003ffe0000 - 000000003ffef000 (ACPI data)
 BIOS-e820: 000000003ffef000 - 000000003fffdc00 (ACPI NVS)
 BIOS-e820: 000000003fffdc00 - 0000000040000000 (reserved)
 BIOS-e820: 00000000fec00000 - 00000000fec86000 (reserved)
 BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
 BIOS-e820: 00000000ffc00000 - 0000000100000000 (reserved)
Warning only 896MB will be used.
Use a HIGHMEM enabled kernel.
896MB LOWMEM available.
On node 0 totalpages: 229376
zone(0): 4096 pages.
zone(1): 225280 pages.
zone(2): 0 pages.
Kernel command line: auto BOOT_IMAGE=Linux ro root=802
Initializing CPU#0
Detected 2992.629 MHz processor.
Console: colour VGA+ 80x25
Calibrating delay loop... 5976.88 BogoMIPS
Memory: 904044k/917504k available (2063k kernel code, 13072k reserved, 685k data, 124k init, 0k highmem)
Dentry cache hash table entries: 131072 (order: 8, 1048576 bytes)
Inode cache hash table entries: 65536 (order: 7, 524288 bytes)
Mount cache hash table entries: 512 (order: 0, 4096 bytes)
Buffer cache hash table entries: 65536 (order: 6, 262144 bytes)
Page-cache hash table entries: 262144 (order: 8, 1048576 bytes)
CPU: Trace cache: 12K uops, L1 D cache: 16K
CPU:     After generic, caps: bfebfbff 20100000 00000000 00000000
CPU:             Common caps: bfebfbff 20100000 00000000 00000000
CPU: Intel(R) Xeon(TM) CPU 3.00GHz stepping 03
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Checking 'hlt' instruction... OK.
POSIX conformance testing by UNIFIX
mtrr: v1.40 (20010327) Richard Gooch (rgooch@atnf.csiro.au)
mtrr: detected mtrr type: Intel
PCI: PCI BIOS revision 2.10 entry at 0xf0031, last bus=4
PCI: Using configuration type 1
PCI: Probing PCI hardware
PCI: Probing PCI hardware (bus 00)
PCI: Ignoring BAR0-3 of IDE controller 00:1f.2
Transparent bridge - Intel Corp. 82801BA/CA/DB/EB PCI Bridge
PCI: Using IRQ router PIIX/ICH [8086/24d0] at 00:1f.0
PCI: Found IRQ 10 for device 00:02.0
PCI: Sharing IRQ 10 with 00:01.0
PCI: Sharing IRQ 10 with 02:02.0
PCI: Found IRQ 6 for device 00:1f.2
PCI: Sharing IRQ 6 with 03:04.0
Linux NET4.0 for Linux 2.4
Based upon Swansea University Computer Society NET3.039
Initializing RT netlink socket
Starting kswapd
VFS: Disk quotas vdquot_6.5.1
Journalled Block Device driver loaded
pty: 512 Unix98 ptys configured
Serial driver version 5.05c (2001-07-08) with HUB-6 MANY_PORTS MULTIPORT SHARE_IRQ SERIAL_PCI enabled
ttyS00 at 0x03f8 (irq = 4) is a 16550A
ttyS01 at 0x02f8 (irq = 3) is a 16550A
Real Time Clock Driver v1.10f
floppy0: no floppy controllers found
RAMDISK driver initialized: 16 RAM disks of 7777K size 1024 blocksize
loop: loaded (max 8 devices)
Compaq SMART2 Driver (v 2.4.28)
HP CISS Driver (v 2.4.52)
Uniform Multi-Platform E-IDE driver Revision: 7.00beta4-2.4
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
hdc: Slimtype COMBO SOSC-2483K, ATAPI CD/DVD-ROM drive
ide1 at 0x170-0x177,0x376 on irq 15
hdc: attached ide-cdrom driver.
hdc: ATAPI 24X DVD-ROM CD-R/RW drive, 2048kB Cache
Uniform CD-ROM driver Revision: 3.12
SCSI subsystem driver Revision: 1.00
Loading Adaptec I2O RAID: Version 2.4 Build 5
Detecting Adaptec I2O RAID controllers...
Red Hat/Adaptec aacraid driver (1.1-3 Jan 20 2005 17:05:43)
megaraid: v1.18k (Release Date: Thu Aug 28 10:05:11 EDT 2003)
PCI: Found IRQ 7 for device 02:03.0
PCI: Sharing IRQ 7 with 03:04.1
megaraid: found 0x1000:0x1960:idx 0:bus 2:slot 3:func 0
scsi0 : Found a MegaRAID controller at 0xf880d000, IRQ: 7
scsi0 : Enabling 64 bit support
megaraid: [713N:G119] detected 1 logical drives
megaraid: supports extended CDBs.
megaraid: channel[1] is raid.
scsi0 : LSI Logic MegaRAID 713N 254 commands 15 targs 4 chans 7 luns
scsi0: scanning virtual channel 0 for logical drives.
  Vendor: MegaRAID  Model: LD 0 RAID1   76G  Rev: 713N
  Type:   Direct-Access                      ANSI SCSI revision: 02
scsi0: scanning virtual channel 1 for logical drives.
scsi0: scanning virtual channel 2 for logical drives.
scsi0: scanning physical channel 0 for devices.
3ware Storage Controller device driver for Linux v1.02.00.037.
3w-xxxx: No cards found.
Attached scsi disk sda at scsi0, channel 0, id 0, lun 0
SCSI device sda: 156297216 512-byte hdwr sectors (80024 MB)
Partition check:
 sda: sda1 sda2
Fusion MPT base driver 2.05.16
Copyright (c) 1999-2004 LSI Logic Corporation
mptbase: 0 MPT adapters found, 0 installed.
Fusion MPT SCSI Host driver 2.05.16
md: linear personality registered as nr 1
md: raid0 personality registered as nr 2
md: raid1 personality registered as nr 3
md: raid5 personality registered as nr 4
raid5: measuring checksumming speed
   8regs     :  3272.800 MB/sec
   32regs    :  2138.000 MB/sec
   pIII_sse  :  5101.600 MB/sec
   pII_mmx   :  3211.200 MB/sec
   p5_mmx    :  3246.000 MB/sec
raid5: using function: pIII_sse (5101.600 MB/sec)
md: md driver 0.90.0 MAX_MD_DEVS=256, MD_SB_DISKS=27
md: Autodetecting RAID arrays.
md: autorun ...
md: ... autorun DONE.
LVM version 1.0.8(17/11/2003)
Initializing Cryptographic API
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP, IGMP
IP: routing cache hash table of 8192 buckets, 64Kbytes
TCP: Hash tables configured (established 262144 bind 65536)
Linux IP multicast router 0.06 plus PIM-SM
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
FAT: bogus logical sector size 0
UMSDOS: msdos_read_super failed, mount aborted.
FAT: bogus logical sector size 0
FAT: bogus logical sector size 0
reiserfs: found format "3.6" with standard journal
reiserfs: checking transaction log (device sd(8,2)) ...
for (sd(8,2))
sd(8,2):Using r5 hash to sort names
VFS: Mounted root (reiserfs filesystem) readonly.
Freeing unused kernel memory: 124k freed
Adding Swap: 1204832k swap-space (priority -1)
Linux agpgart interface v0.99 (c) Jeff Hartmann
agpgart: Maximum main memory to use for agp memory: 816M
agpgart: no supported devices found.
Intel(R) PRO/1000 Network Driver - version 5.6.10.1-k1
Copyright (c) 1999-2004 Intel Corporation.
PCI: Found IRQ 7 for device 03:04.1
PCI: Sharing IRQ 7 with 02:03.0
e1000: eth0: e1000_probe: Intel(R) PRO/1000 Network Connection
PCI: Found IRQ 6 for device 03:04.0
PCI: Sharing IRQ 6 with 00:1f.2
e1000: eth1: e1000_probe: Intel(R) PRO/1000 Network Connection
scsi1 : SCSI host adapter emulation for IDE ATAPI devices
Zapata Telephony Interface Registered on major 196
PCI: Found IRQ 10 for device 02:02.0
PCI: Sharing IRQ 10 with 00:01.0
PCI: Sharing IRQ 10 with 00:02.0
Found TE4XXP at base address fceefc00, remapped to f89fcc00
TE4XXP version c01a0164, burst OFF, slip debug: OFF
FALC version: 00000005, Board ID: 00
Reg 0: 0x36dcd400
Reg 1: 0x36dcd000
Reg 2: 0xffffffff
Reg 3: 0x00000000
Reg 4: 0x0000ff01
Reg 5: 0x00000000
Reg 6: 0xc01a0164
Reg 7: 0x00001000
Reg 8: 0x00000000
Reg 9: 0x00ff00ff
Reg 10: 0x00000000
TE4XXP: Launching card: 0
TE4XXP: Setting up global serial parameters
Found a Wildcard: Wildcard TE410P (2nd Gen)
About to enter spanconfig!
Done with spanconfig!
About to enter spanconfig!
Done with spanconfig!
Registered tone zone 0 (United States / North America)
About to enter startup!
TE4XXP: Span 3 configured for ESF/B8ZS
wct4xxp: Setting yellow alarm on span 3
2G: Got interrupt, status = 0000ff0d, GIS = 0084
SPAN 3: Primary Sync Source
2G: Got interrupt, status = 0000ff0a, GIS = 0080
2G: Got interrupt, status = 0000ff0a, GIS = 0080
2G: Got interrupt, status = 0000ff0a, GIS = 0080
2G: Got interrupt, status = 0000ff0a, GIS = 0080
2G: Got interrupt, status = 0000ff0a, GIS = 0080
2G: Got interrupt, status = 0000ff0a, GIS = 0080
2G: Got interrupt, status = 0000ff0a, GIS = 0080
2G: Got interrupt, status = 0000ff0a, GIS = 0080
2G: Got interrupt, status = 0000ff0b, GIS = 0084
2G: Got interrupt, status = 0000ff0a, GIS = 0080
2G: Got interrupt, status = 0000ff0a, GIS = 0080
VPM: Span 0 U-law mode
2G: Got interrupt, status = 0000ff0a, GIS = 0080
2G: Got interrupt, status = 0000ff0a, GIS = 0080
2G: Got interrupt, status = 0000ff0a, GIS = 0080
2G: Got interrupt, status = 0000ff0b, GIS = 0084
2G: Got interrupt, status = 0000ff0a, GIS = 0080
2G: Got interrupt, status = 0000ff0a, GIS = 0080
2G: Got interrupt, status = 0000ff0a, GIS = 0080
VPM: DTMF threshold set to 1000
VPM: Span 1 U-law mode
VPM: DTMF threshold set to 1000
VPM: Span 2 U-law mode
VPM: DTMF threshold set to 1000
VPM: Span 3 U-law mode
VPM: DTMF threshold set to 1000
VPM: DTMF threshold set to 1000
VPM: DTMF threshold set to 1000
VPM: DTMF threshold set to 1000
VPM: DTMF threshold set to 1000
VPM: Present and operational servicing 4 span(s)
Completed startup!
About to enter startup!
TE4XXP: Span 4 configured for ESF/B8ZS
wct4xxp: Setting yellow alarm on span 4
SPAN 4: Secondary Sync Source
Completed startup!
Linux Kernel Card Services 3.1.22
  options:  [pci] [cardbus] [pm]
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
Intel ISA PCIC probe: not found.
Databook TCIC-2 PCMCIA probe: not found.
ds: no socket drivers loaded!
e1000: eth0: e1000_watchdog: NIC Link is Up 100 Mbps Full Duplex
wct4xxp: Clearing yellow alarm on span 3
wct4xxp: Clearing yellow alarm on span 4
About to enter spanconfig!
About to enter startup!
wct4xxp: Setting yellow alarm on span 3
TE4XXP: Span 3 configured for ESF/B8ZS
SPAN 3: Primary Sync Source
Completed startup!
About to enter spanconfig!
About to enter startup!
wct4xxp: Setting yellow alarm on span 4
TE4XXP: Span 4 configured for ESF/B8ZS
SPAN 4: Secondary Sync Source
Completed startup!
Registered tone zone 0 (United States / North America)
wct4xxp: Clearing yellow alarm on span 3
wct4xxp: Clearing yellow alarm on span 4
Zaptel: Master changed to TE4/0/4
Zaptel: Master changed to TE4/0/3