root@mary:/etc# dmesg
ion [ECOR] (cff4d704) [EmbeddedControl] [20060127]
ACPI Error (exfldio-0279): Region EmbeddedControl(3) has no handler [20060127]
ACPI Error (psparse-0517): Method parse/execution failed [\_SB_.PCI0.LPC_.EC__._INI] (Node cff57540), AE_NOT_EXIST
ACPI: Interpreter enabled
ACPI: Using PIC for interrupt routing
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 10 *11)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 10 *11)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 *11)
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 *11)
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 11) *0, disabled.
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 9 10 11) *0, disabled.
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 9 10 11) *0, disabled.
ACPI: PCI Root Bridge [PCI0] (0000:00)
PCI: Probing PCI hardware (bus 00)
ACPI Error (evregion-0303): No handler for Region [ECOR] (cff4d704) [EmbeddedControl] [20060127]
ACPI Error (exfldio-0279): Region EmbeddedControl(3) has no handler [20060127]
ACPI Exception (dswexec-0458): AE_NOT_EXIST, While resolving operands for [AE_NOT_CONFIGURED] [20060127]
ACPI Error (psparse-0517): Method parse/execution failed [\_SB_.PCI0.LPC_.EC__.BAT0._STA] (Node cff57b80), AE_NOT_EXIST
ACPI Error (uteval-0158): Method execution failed [\_SB_.PCI0.LPC_.EC__.BAT0._STA] (Node cff57b80), AE_NOT_EXIST
ACPI Error (evregion-0303): No handler for Region [ECOR] (cff4d704) [EmbeddedControl] [20060127]
ACPI Error (exfldio-0279): Region EmbeddedControl(3) has no handler [20060127]
ACPI Exception (dswexec-0458): AE_NOT_EXIST, While resolving operands for [AE_NOT_CONFIGURED] [20060127]
ACPI Error (psparse-0517): Method parse/execution failed [\_SB_.PCI0.LPC_.EC__.BAT1._STA] (Node cff57a00), AE_NOT_EXIST
ACPI Error (uteval-0158): Method execution failed [\_SB_.PCI0.LPC_.EC__.BAT1._STA] (Node cff57a00), AE_NOT_EXIST
ACPI Error (evregion-0303): No handler for Region [ECOR] (cff4d704) [EmbeddedControl] [20060127]
ACPI Error (exfldio-0279): Region EmbeddedControl(3) has no handler [20060127]
ACPI Exception (dswexec-0458): AE_NOT_EXIST, While resolving operands for [AE_NOT_CONFIGURED] [20060127]
ACPI Error (psparse-0517): Method parse/execution failed [\_SB_.PCI0.LPC_.EC__.BGID] (Node cff5cca0), AE_NOT_EXIST
ACPI Error (psparse-0517): Method parse/execution failed [\_SB_.PCI0.LPC_.EC__.BINI] (Node cff5ccc0), AE_NOT_EXIST
ACPI Error (psparse-0517): Method parse/execution failed [\_SB_.PCI0.LPC_.EC__.BSTA] (Node cff5cd00), AE_NOT_EXIST
ACPI Error (psparse-0517): Method parse/execution failed [\_SB_.PCI0.IDE0.SCND.MSTR._STA] (Node cff5cbc0), AE_NOT_EXIST
ACPI Error (uteval-0158): Method execution failed [\_SB_.PCI0.IDE0.SCND.MSTR._STA] (Node cff5cbc0), AE_NOT_EXIST
ACPI Error (evregion-0303): No handler for Region [ECOR] (cff4d704) [EmbeddedControl] [20060127]
ACPI Error (exfldio-0279): Region EmbeddedControl(3) has no handler [20060127]
ACPI Exception (dswexec-0458): AE_NOT_EXIST, While resolving operands for [AE_NOT_CONFIGURED] [20060127]
ACPI Error (psparse-0517): Method parse/execution failed [\_SB_.PCI0.LPC_.EC__.BGID] (Node cff5cca0), AE_NOT_EXIST
ACPI Error (psparse-0517): Method parse/execution failed [\_SB_.PCI0.LPC_.EC__.BINI] (Node cff5ccc0), AE_NOT_EXIST
ACPI Error (psparse-0517): Method parse/execution failed [\_SB_.PCI0.LPC_.EC__.BSTA] (Node cff5cd00), AE_NOT_EXIST
ACPI Error (psparse-0517): Method parse/execution failed [\_SB_.PCI0.USB0.URTH.UNST._STA] (Node cff5c3c0), AE_NOT_EXIST
ACPI Error (uteval-0158): Method execution failed [\_SB_.PCI0.USB0.URTH.UNST._STA] (Node cff5c3c0), AE_NOT_EXIST
ACPI Error (evregion-0303): No handler for Region [ECOR] (cff4d704) [EmbeddedControl] [20060127]
ACPI Error (exfldio-0279): Region EmbeddedControl(3) has no handler [20060127]
ACPI Exception (dswexec-0458): AE_NOT_EXIST, While resolving operands for [AE_NOT_CONFIGURED] [20060127]
ACPI Error (psparse-0517): Method parse/execution failed [\_SB_.PCI0.LPC_.EC__.BGID] (Node cff5cca0), AE_NOT_EXIST
ACPI Error (psparse-0517): Method parse/execution failed [\_SB_.PCI0.LPC_.EC__.BINI] (Node cff5ccc0), AE_NOT_EXIST
ACPI Error (psparse-0517): Method parse/execution failed [\_SB_.PCI0.LPC_.EC__.BSTA] (Node cff5cd00), AE_NOT_EXIST
ACPI Error (psparse-0517): Method parse/execution failed [\_SB_.NEST._STA] (Node cff5ca00), AE_NOT_EXIST
ACPI Error (uteval-0158): Method execution failed [\_SB_.NEST._STA] (Node cff5ca00), AE_NOT_EXIST
PCI quirk: region 1000-107f claimed by ICH4 ACPI/GPIO/TCO
PCI quirk: region 1180-11bf claimed by ICH4 GPIO
PCI: Ignoring BAR0-3 of IDE controller 0000:00:1f.1
Boot video device is 0000:01:00.0
PCI: Transparent bridge - 0000:00:1e.0
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: Embedded Controller [EC] (gpe 28) interrupt mode.
ACPI: Power Resource [PUBS] (on)
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGP_._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI1._PRT]
Linux Plug and Play Support v0.97 (c) Adam Belay
SCSI subsystem initialized
usbcore: registered new driver usbfs
usbcore: registered new driver hub
PCI: Using ACPI for IRQ routing
PCI: If a device doesn't work, try "pci=routeirq".  If it helps, post a report
PCI: Bridge: 0000:00:01.0
  IO window: disabled.
  MEM window: c0100000-c01fffff
  PREFETCH window: e0000000-ebffffff
PCI: Bus 3, cardbus bridge: 0000:02:00.0
  IO window: 00002000-000020ff
  IO window: 00002400-000024ff
  PREFETCH window: f0000000-f1ffffff
  MEM window: c2000000-c3ffffff
PCI: Bus 7, cardbus bridge: 0000:02:00.1
  IO window: 00002800-000028ff
  IO window: 00002c00-00002cff
  PREFETCH window: f2000000-f3ffffff
  MEM window: c4000000-c5ffffff
PCI: Bridge: 0000:00:1e.0
  IO window: 2000-6fff
  MEM window: c0200000-cfffffff
  PREFETCH window: f0000000-f7ffffff
PCI: Setting latency timer of device 0000:00:1e.0 to 64
ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 11
PCI: setting IRQ 11 as level-triggered
ACPI: PCI Interrupt 0000:02:00.0[A] -> Link [LNKA] -> GSI 11 (level, low) -> IRQ 11
ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 11
ACPI: PCI Interrupt 0000:02:00.1[B] -> Link [LNKB] -> GSI 11 (level, low) -> IRQ 11
NET: Registered protocol family 2
IP route cache hash table entries: 2048 (order: 1, 8192 bytes)
TCP established hash table entries: 8192 (order: 3, 32768 bytes)
TCP bind hash table entries: 4096 (order: 2, 16384 bytes)
TCP: Hash tables configured (established 8192 bind 4096)
TCP reno registered
Simple Boot Flag at 0x35 set to 0x1
IBM machine detected. Enabling interrupts during APM calls.
apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac)
apm: overridden by ACPI.
VFS: Disk quotas dquot_6.5.1
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
Initializing Cryptographic API
io scheduler noop registered
io scheduler anticipatory registered (default)
io scheduler deadline registered
io scheduler cfq registered
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
vesafb: framebuffer at 0xe8000000, mapped to 0xd0880000, using 1536k, total 15168k
vesafb: mode is 1024x768x8, linelength=1024, pages=20
vesafb: protected mode interface info at c000:9865
vesafb: scrolling: redraw
vesafb: Pseudocolor: size=6:6:6:6, shift=0:0:0:0
Console: switching to colour frame buffer device 128x48
fb0: VESA VGA frame buffer device
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
Real Time Clock Driver v1.12ac
Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a NS16550A
serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a NS16550A
Floppy drive(s): fd0 is 1.44M
FDC 0 is a National Semiconductor PC87306
RAMDISK driver initialized: 16 RAM disks of 16384K size 1024 blocksize
loop: loaded (max 8 devices)
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
ICH3M: IDE controller at PCI slot 0000:00:1f.1
PCI: Enabling device 0000:00:1f.1 (0005 -> 0007)
ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 11
ACPI: PCI Interrupt 0000:00:1f.1[A] -> Link [LNKC] -> GSI 11 (level, low) -> IRQ 11
ICH3M: chipset revision 2
ICH3M: not 100% native mode: will probe irqs later
    ide0: BM-DMA at 0x1860-0x1867, BIOS settings: hda:DMA, hdb:pio
    ide1: BM-DMA at 0x1868-0x186f, BIOS settings: hdc:DMA, hdd:pio
Probing IDE interface ide0...
hda: FUJITSU MHT2040AT, ATA DISK drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
Probing IDE interface ide1...
hdc: TOSHIBA DVD-ROM SD-C2302, ATAPI CD/DVD-ROM drive
ide1 at 0x170-0x177,0x376 on irq 15
hda: max request size: 128KiB
hda: 78140160 sectors (40007 MB) w/2048KiB Cache, CHS=65535/16/63, UDMA(100)
hda: cache flushes supported
 hda: hda1 hda2 hda3 < hda5 >
hdc: ATAPI 24X DVD-ROM drive, 128kB Cache, UDMA(33)
Uniform CD-ROM driver Revision: 3.20
ide-floppy driver 0.99.newide
libata version 1.20 loaded.
usbmon: debugfs is not available
usbcore: registered new driver hiddev
usbcore: registered new driver usbhid
drivers/usb/input/hid-core.c: v2.6:USB HID core driver
PNP: No PS/2 controller found. Probing ports directly.
serio: i8042 AUX port at 0x60,0x64 irq 12
serio: i8042 KBD port at 0x60,0x64 irq 1
mice: PS/2 mouse device common for all mice
md: linear personality registered for level -1
md: raid0 personality registered for level 0
md: raid1 personality registered for level 1
md: raid5 personality registered for level 5
md: raid4 personality registered for level 4
raid5: automatically using best checksumming function: pIII_sse
   pIII_sse  :  2322.000 MB/sec
raid5: using function: pIII_sse (2322.000 MB/sec)
raid6: int32x1    331 MB/s
raid6: int32x2    416 MB/s
raid6: int32x4    293 MB/s
raid6: int32x8    261 MB/s
raid6: mmxx1      971 MB/s
raid6: mmxx2     1142 MB/s
raid6: sse1x1     997 MB/s
raid6: sse1x2    1166 MB/s
raid6: using algorithm sse1x2 (1166 MB/s)
md: raid6 personality registered for level 6
md: md driver 0.90.3 MAX_MD_DEVS=256, MD_SB_DISKS=27
md: bitmap version 4.39
TCP bic registered
Initializing IPsec netlink socket
NET: Registered protocol family 1
NET: Registered protocol family 17
Using IPI Shortcut mode
ACPI wakeup devices:
 LID SLPB PCI0 UART PCI1 USB0 USB1 USB2 AC97
ACPI: (supports S0 S3 S4 S5)
md: Autodetecting RAID arrays.
md: autorun ...
md: ... autorun DONE.
EXT2-fs warning (device hda5): ext2_fill_super: mounting ext3 filesystem as ext2
VFS: Mounted root (ext2 filesystem) readonly.
Freeing unused kernel memory: 184k freed
input: AT Translated Set 2 keyboard as /class/input/input0
Adding 498004k swap on /dev/hda2.  Priority:-1 extents:1 across:498004k
eepro100.c:v1.09j-t 9/29/99 Donald Becker http://www.scyld.com/network/eepro100.html
eepro100.c: $Revision: 1.36 $ 2000/11/17 Modified by Andrey V. Savochkin <saw@saw.sw.com.sg> and others
ACPI: PCI Interrupt Link [LNKE] enabled at IRQ 11
ACPI: PCI Interrupt 0000:02:08.0[A] -> Link [LNKE] -> GSI 11 (level, low) -> IRQ 11
eth0: 0000:02:08.0, 00:D0:59:CB:9E:F8, IRQ 11.
  Board assembly 000000-000, Physical connectors present: RJ45
  Primary interface chip i82555 PHY #1.
  General self-test: passed.
  Serial sub-system self-test: passed.
  Internal registers self-test: passed.
  ROM checksum self-test: passed (0x04f4518b).
PCI: Enabling device 0000:00:1f.5 (0000 -> 0001)
ACPI: PCI Interrupt 0000:00:1f.5[B] -> Link [LNKB] -> GSI 11 (level, low) -> IRQ 11
PCI: Setting latency timer of device 0000:00:1f.5 to 64
USB Universal Host Controller Interface driver v3.0
Linux agpgart interface v0.101 (c) Dave Jones
intel8x0_measure_ac97_clock: measured 55664 usecs
intel8x0: clocking to 48000
ACPI: PCI Interrupt 0000:00:1d.0[A] -> Link [LNKA] -> GSI 11 (level, low) -> IRQ 11
PCI: Setting latency timer of device 0000:00:1d.0 to 64
uhci_hcd 0000:00:1d.0: UHCI Host Controller
uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1
uhci_hcd 0000:00:1d.0: irq 11, io base 0x00001800
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 11
ACPI: PCI Interrupt 0000:00:1d.1[B] -> Link [LNKD] -> GSI 11 (level, low) -> IRQ 11
PCI: Setting latency timer of device 0000:00:1d.1 to 64
uhci_hcd 0000:00:1d.1: UHCI Host Controller
uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2
uhci_hcd 0000:00:1d.1: irq 11, io base 0x00001820
usb usb2: configuration #1 chosen from 1 choice
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
ACPI: PCI Interrupt 0000:00:1d.2[C] -> Link [LNKC] -> GSI 11 (level, low) -> IRQ 11
PCI: Setting latency timer of device 0000:00:1d.2 to 64
uhci_hcd 0000:00:1d.2: UHCI Host Controller
uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3
uhci_hcd 0000:00:1d.2: irq 11, io base 0x00001840
usb usb3: configuration #1 chosen from 1 choice
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
ACPI: PCI Interrupt 0000:02:00.0[A] -> Link [LNKA] -> GSI 11 (level, low) -> IRQ 11
Yenta: CardBus bridge found at 0000:02:00.0 [1014:023b]
Yenta: Using INTVAL to route CSC interrupts to PCI
Yenta: Routing CardBus interrupts to PCI
Yenta TI: socket 0000:02:00.0, mfunc 0x01d21022, devctl 0x64
Yenta: ISA IRQ mask 0x04b8, PCI irq 11
Socket status: 30000006
pcmcia: parent PCI bridge I/O window: 0x2000 - 0x6fff
cs: IO port probe 0x2000-0x6fff: clean.
pcmcia: parent PCI bridge Memory window: 0xc0200000 - 0xcfffffff
pcmcia: parent PCI bridge Memory window: 0xf0000000 - 0xf7ffffff
ACPI: PCI Interrupt 0000:02:00.1[B] -> Link [LNKB] -> GSI 11 (level, low) -> IRQ 11
Yenta: CardBus bridge found at 0000:02:00.1 [1014:023b]
Yenta: Using INTVAL to route CSC interrupts to PCI
Yenta: Routing CardBus interrupts to PCI
Yenta TI: socket 0000:02:00.1, mfunc 0x01d21022, devctl 0x64
Yenta: ISA IRQ mask 0x04b8, PCI irq 11
Socket status: 30000006
pcmcia: parent PCI bridge I/O window: 0x2000 - 0x6fff
cs: IO port probe 0x2000-0x6fff: clean.
pcmcia: parent PCI bridge Memory window: 0xc0200000 - 0xcfffffff
pcmcia: parent PCI bridge Memory window: 0xf0000000 - 0xf7ffffff
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
agpgart: Detected an Intel 830M Chipset.
agpgart: AGP aperture is 256M @ 0xd0000000
cs: IO port probe 0xc00-0xcff: excluding 0xcf8-0xcff
cs: IO port probe 0x820-0x8ff: clean.
cs: IO port probe 0x800-0x80f: clean.
cs: IO port probe 0x3e0-0x4ff: excluding 0x4d0-0x4d7
cs: IO port probe 0x100-0x3af: clean.
cs: IO port probe 0xa00-0xaff: clean.
cs: IO port probe 0xc00-0xcff: excluding 0xcf8-0xcff
cs: IO port probe 0x820-0x8ff: clean.
cs: IO port probe 0x800-0x80f: clean.
cs: IO port probe 0x3e0-0x4ff: excluding 0x4d0-0x4d7
cs: IO port probe 0x100-0x3af: clean.
cs: IO port probe 0xa00-0xaff: clean.
input: PC Speaker as /class/input/input1
input: PS/2 Generic Mouse as /class/input/input2
parport0: PC-style at 0x3bc [PCSPP,TRISTATE]
lp0: using parport0 (polling).
lp0: console ready
Capability LSM initialized
NET: Registered protocol family 10
lo: Disabled Privacy Extensions
IPv6 over IPv4 tunneling driver
eth0: no IPv6 routers present
atkbd.c: Keyboard on isa0060/serio0 reports too many keys pressed.
atkbd.c: Keyboard on isa0060/serio0 reports too many keys pressed.
atkbd.c: Keyboard on isa0060/serio0 reports too many keys pressed.
portmap: server localhost not responding, timed out
RPC: failed to contact portmap (errno -5).
portmap: server localhost not responding, timed out
RPC: failed to contact portmap (errno -5).
lockd_up: makesock failed, error=-5
portmap: server localhost not responding, timed out
RPC: failed to contact portmap (errno -5).