CFE> ifconfig eth0 -addr=192.168.2.10 Device eth0: hwaddr 00-90-4C-4E-33-77, ipaddr 192.168.2.10, mask 255.255.255.0 gateway not set, nameserver not set *** command status = 0 CFE> flash -noheader 192.168.2.4:openwrt-brcm-2.4-squashfs.trx flash1.trx Reading 192.168.2.4:openwrt-brcm-2.4-squashfs.trx: Done. 2494464 bytes read Programming...done. 2494464 bytes written *** command status = 0 CFE> Decompressing...........done Decompressing...........done CFE version 1.0.37 for BCM947XX (32bit,SP,LE) Build Date: Tue Jan 16 20:33:15 CST 2007 (tony@macpaul-x60) Copyright (C) 2000,2001,2002,2003 Broadcom Corporation. Initializing Arena Initializing Devices. flash_init () : boot size initialize Boot partition size = 262144(0x40000) TOP type flash .. TOP type flash .. TOP type flash .. et0: Broadcom BCM47xx 10/100 Mbps Ethernet Controller 3.131.35.4 rndis0: Broadcom USB RNDIS Network Adapter (P-t-P) et1: Broadcom BCM47xx 10/100 Mbps Ethernet Controller 3.131.35.4 CPU type 0x29006: 264MHz Total memory: 32768 KBytes Total memory used by CFE: 0x80300000 - 0x803A0C90 (658576) Initialized Data: 0x80336450 - 0x80338C60 (10256) BSS Area: 0x80338C60 - 0x8033AC90 (8240) Local Heap: 0x8033AC90 - 0x8039EC90 (409600) Stack Area: 0x8039EC90 - 0x803A0C90 (8192) Text (code) segment: 0x80300000 - 0x80336450 (222288) Boot area (physical): 0x003A1000 - 0x003E1000 Relocation Factor: I:00000000 - D:00000000 Device eth0: hwaddr 00-90-4C-4E-33-77, ipaddr 192.168.0.2, mask 255.255.255.0 gateway not set, nameserver not set Loader:elf Filesys:tftp Dev:eth0 File:192.168.0.100:vmlinux Options:(null) Loading: TFTP error 1: File not found Failed. Could not load 192.168.0.100:vmlinux: File not found Loader:raw Filesys:raw Dev:flash0.os File: Options:(null) Loading: .. 3732 bytes read Entry at 0x80001000 Closing network. Starting program at 0x80001000 CPU revision is: 00029006 Primary instruction cache 16kB, physically tagged, 2-way, linesize 16 bytes. Primary data cache 16kB, 2-way, linesize 16 bytes. Linux version 2.4.34 (florian@meteor) (gcc version 3.4.6 (OpenWrt-2.0)) #5 Mon Jun 18 00:19:44 CEST 2007 Setting the PFC to its default value Determined physical RAM map: memory: 02000000 @ 00000000 (usable) On node 0 totalpages: 8192 zone(0): 8192 pages. zone(1): 0 pages. zone(2): 0 pages. Kernel command line: root=/dev/mtdblock2 rootfstype=squashfs,jffs2 init=/etc/preinit noinitrd console=ttyS0,115200 CPU: BCM4704 rev 9 at 264 MHz Using 132.000 MHz high precision timer. Calibrating delay loop... 262.96 BogoMIPS Memory: 30412k/32768k available (1476k kernel code, 2356k reserved, 100k data, 84k init, 0k highmem) Dentry cache hash table entries: 4096 (order: 3, 32768 bytes) Inode cache hash table entries: 2048 (order: 2, 16384 bytes) Mount cache hash table entries: 512 (order: 0, 4096 bytes) Buffer cache hash table entries: 1024 (order: 0, 4096 bytes) Page-cache hash table entries: 8192 (order: 3, 32768 bytes) Checking for 'wait' instruction... unavailable. POSIX conformance testing by UNIFIX PCI: Initializing host PCI: Fixing up bus 0 PCI: Fixing up bridge PCI: Fixing up bus 1 Linux NET4.0 for Linux 2.4 Based upon Swansea University Computer Society NET3.039 Initializing RT netlink socket Starting kswapd Registering mini_fo version $Id$ devfs: v1.12c (20020818) Richard Gooch (rgooch@atnf.csiro.au) devfs: boot_options: 0x1 JFFS2 version 2.1. (C) 2001 Red Hat, Inc., designed by Axis Communications AB. squashfs: version 3.0 (2006/03/15) Phillip Lougher pty: 256 Unix98 ptys configured Serial driver version 5.05c (2001-07-08) with MANY_PORTS SHARE_IRQ SERIAL_PCI enabled ttyS00 at 0xb8000300 (irq = 3) is a 16550A ttyS01 at 0xb8000400 (irq = 3) is a 16550A b44.c:v0.93 (Mar, 2004) eth0: Broadcom 47xx 10/100BaseT Ethernet 00:90:4c:4e:33:77 eth1: Broadcom 47xx 10/100BaseT Ethernet 00:90:4c:4f:00:0c Amd/Fujitsu Extended Query Table v1.3 at 0x0040 Physically mapped flash: Swapping erase regions for broken CFI table. number of CFI chips: 1 cfi_cmdset_0002: Disabling fast programming due to code brokenness. Flash device: 0x800000 at 0x1c000000 bootloader size: 262144 Physically mapped flash: Filesystem type: squashfs, size=0x1cd795 Updating TRX offsets and length: old trx = [0x0000001c, 0x000008ec, 0x0007f800], len=0x00261000 crc32=0xc07691c0 new trx = [0x0000001c, 0x000008ec, 0x0007f800], len=0x00250000 crc32=0x23c3e6d4 Done Creating 5 MTD partitions on "Physically mapped flash": 0x00000000-0x00040000 : "cfe" 0x00040000-0x007f0000 : "linux" 0x000bf800-0x00290000 : "rootfs" mtd: partition "rootfs" doesn't start on an erase block boundary -- force read-only 0x007f0000-0x00800000 : "nvram" 0x00290000-0x007f0000 : "rootfs_data" sflash: found no supported devices Initializing Cryptographic API NET4: Linux TCP/IP 1.0 for NET4.0 IP Protocols: ICMP, UDP, TCP, IGMP IP: routing cache hash table of 512 buckets, 4Kbytes TCP: Hash tables configured (established 2048 bind 4096) Linux IP multicast router 0.06 plus PIM-SM ip_conntrack version 2.1 (5953 buckets, 5953 max) - 360 bytes per conntrack ip_tables: (C) 2000-2002 Netfilter core team NET4: Unix domain sockets 1.0/SMP for Linux NET4.0. NET4: Ethernet Bridge 008 for NET4.0 802.1Q VLAN Support v1.8 Ben Greear All bugs added by David S. Miller VFS: Mounted root (squashfs filesystem) readonly. Mounted devfs on /dev Freeing unused kernel memory: 84k freed Algorithmics/MIPS FPU Emulator v1.5 mount: mounting none on /sys failed mount: mounting none on /dev failed - preinit - diag: Detected 'D-Link DIR-300' b44: eth0: Link is up at 100 Mbps, full duplex. b44: eth0: Flow control is off for TX and off for RX. Probing device eth0: No Robo switch in managed mode found Probing device eth1: found! jffs2 not ready yet; using ramdisk mini_fo: using base directory: / mini_fo: using storage directory: /tmp/root - init - init started: BusyBox v1.4.2 (2007-06-16 20:02:06 CEST) multi-call binary Please press Enter to activate this console. jffs2.bbc: SIZE compression mode activated. b44: eth0: Link is up at 100 Mbps, full duplex. b44: eth0: Flow control is off for TX and off for RX. BusyBox v1.4.2 (2007-06-16 20:02:06 CEST) Built-in shell (ash) Enter 'help' for a list of built-in commands. _______ ________ __ | |.-----.-----.-----.| | | |.----.| |_ | - || _ | -__| || | | || _|| _| |_______|| __|_____|__|__||________||__| |____| |__| W I R E L E S S F R E E D O M KAMIKAZE (bleeding edge, r7645) ------------------- * 10 oz Vodka Shake well with ice and strain * 10 oz Triple sec mixture into 10 shot glasses. * 10 oz lime juice Salute! --------------------------------------------------- root@OpenWrt:/# b44: eth1: Link is up at 100 Mbps, full duplex. b44: eth1: Flow control is off for TX and off for RX. root@OpenWrt:/# IPv6 v0.8 for NET4.0 IPv6 over IPv4 tunneling driver BFL_ENETADM not set in boardflags. Use force=1 to ignore. PCI: Enabling device 01:01.0 (0004 -> 0006) wl0: Broadcom BCM4318 802.11 Wireless Controller 4.80.53.0 CSLIP: code copyright 1989 Regents of the University of California PPP generic driver version 2.4.2 Universal TUN/TAP device driver 1.5 (C)1999-2002 Maxim Krasnyansky ipt_recent v0.3.1: Stephen Frost . http://snowman.net/projects/ipt_recent/ IPP2P v0.8.1_rc1 loading imq driver loaded. ipt_time loading ip_conntrack_rtsp v0.01 loading ip_nat_rtsp v0.01 loading ip_conntrack_pptp version 1.9 loaded ip_nat_pptp version 1.5 loaded root@OpenWrt:/# iwconfig lo no wireless extensions. eth0 no wireless extensions. eth1 no wireless extensions. sit0 no wireless extensions. wl0 IEEE 802.11-DS ESSID:"" Mode:Managed Frequency:2.412 GHz Tx-Power:off imq0 no wireless extensions. imq1 no wireless extensions. root@OpenWrt:/# ifconfig eth0 Link encap:Ethernet HWaddr 00:90:4C:4E:33:77 inet addr:192.168.1.1 Bcast:192.168.1.255 Mask:255.255.255.0 inet6 addr: fe80::290:4cff:fe4e:3377/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:5 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:0 (0.0 B) TX bytes:398 (398.0 B) Interrupt:4 eth1 Link encap:Ethernet HWaddr 00:90:4C:4E:33:78 inet6 addr: fe80::290:4cff:fe4e:3378/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:0 (0.0 B) TX bytes:0 (0.0 B) Interrupt:5 lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:0 (0.0 B) TX bytes:0 (0.0 B) root@OpenWrt:/# ifconfig jffs2_scan_eraseblock(): End of filesystem marker found at 0x0 jffs2_build_filesystem(): unlocking the mtd device... done. jffs2_build_filesystem(): erasing all blocks after the end markerdone. mini_fo: using base directory: / mini_fo: using storage directory: /jffs /bin/ash: ifcon: not found root@OpenWrt:/# root@OpenWrt:/#